summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/mach-imx6q.c
AgeCommit message (Collapse)AuthorFilesLines
2015-04-22Merge tag 'armsoc-late' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Olof Johansson: "We were expecting to sit on this branch through most of the merge window since the contents was merged into our tree late, but we ended up sitting on all of our contents so it can go in with the rest. The contents here is: - a large branch of cleanups of the CM/PRM blocks on OMAP. - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7. - a branch with DT updates for Freescale i.MX. including some shuffling from .dts to .dtsi (include) files that causes a little churn" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON ARM: OMAP4+: control: add support for initializing control module via DT ARM: dts: dra7: add minimal l4 bus layout with control module support ARM: dts: omap5: add minimal l4 bus layout with control module support ARM: OMAP4+: control: remove support for legacy pad read/write ARM: OMAP4: display: convert display to use syscon for dsi muxing ARM: dts: omap4: add minimal l4 bus layout with control module support ARM: dts: am4372: add minimal l4 bus layout with control module support ARM: dts: am43xx-epos-evm: fix pinmux node layout ARM: dts: am33xx: add minimal l4 bus layout with control module support ARM: dts: omap3: add minimal l4 bus layout with control module support ARM: dts: omap24xx: add minimal l4 bus layout with control module support ARM: OMAP2+: control: add syscon support for register accesses ARM: OMAP2+: id: cache omap_type value ARM: OMAP2+: control: remove API for getting control module base address ARM: OMAP2+: clock: add low-level support for regmap ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags ARM: OMAP2+: CM: move SoC specific init calls within a generic API ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility ...
2015-03-30ARM: imx6: Warn when an old DT is detectedMarc Zyngier1-0/+1
Now that the GPC has been converted to be a full blown irqchip (and not a mole on the side of the GIC), booting a new kernel with an old DT is likely to result in a rough ride for the user. This patch makes sure such a situation is promptly detected and the user made aware that a DT update is in order. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30ARM: imx6: convert GPC to stacked domainsMarc Zyngier1-1/+0
IMX6 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the fact that the GPC block is actually the first interrupt controller in the chain, kernels with this patch applied wont have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-11ARM: imx: fix struct clk pointer comparingShawn Guo1-2/+3
Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-01-20ARM i.MX6q: unmap memory mapped at imx6q_opp_check_speed_grading()Sebastian Andrzej Siewior1-1/+1
imx6q_opp_check_speed_grading() remaps memory to the base variable and never unmaps it. I can't see how this can be of any use later so here I unmap it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-22ARM: imx: clean up machine mxc_arch_reset_init_dt reset initJingchang Lu1-3/+0
System restart mechanism has been changed with the introduction of "kernel restart handler call chain support". The imx2 watchdog based restart handler has been moved to the driver, and these restart can be removed from the machine layer. This patch cleans up the device tree version machine reset init with mxc_arch_reset_init_dt and removes corresponding .restart handler, for the .init_machine that can be handled by system default after removing the mxc_arch_reset_init_dt, the .init_machine is also removed. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-07-18ARM: imx: mark .dt_compat as constShawn Guo1-1/+1
Otherwise GCC will mark the .init.rodata section R/W, which causes a compile error once we add other real R/O data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: mx6: Only check for 1.2GHz for mx6quadFabio Estevam1-1/+1
It is only the mx6quad variant that can run up to 1.2GHz, so add the check accordingly. This avoids getting the following warning on a mx6solo: failed to disable 1.2 GHz OPP Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-03-05ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priorityPhilipp Zabel1-0/+34
This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity. Some boards like the SabreLite and SabreSD seem to set this in the DCD already, but the documented register reset values do not contain the necessary settings. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add speed grading check for i.mx6 socAnson Huang1-3/+23
The fuse map of speed_grading[1:0] defines the max speed of ARM, see below the definition: 2b'11: 1200000000Hz; 2b'10: 996000000Hz; 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. 2b'00: 792000000Hz; Need to remove all illegal setpoints according to fuse map. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx6q: support ptp and rmii clock from padShawn Guo1-1/+35
On imx6qdl, the ENET RMII and PTP clock can come from either internal ANATOP/CCM or external clock source through pad GPIO_16. But in case of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared. The patch adds the support for systems that use an external clock source and distinguishes above two cases by checking if the PTP clock specified in device tree is the one coming from the internal ANATOP/CCM. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add suspend in ocram support for i.mx6qAnson Huang1-1/+1
When system enter suspend, we can set the DDR IO to high-Z state to save DDR IOs' power consumption, this operation can save many power(from ~26mA@1.5V to ~15mA@1.5V, measured on i.MX6Q SabreSD board, R25) of DDR IOs. To achieve that, we need to copy the suspend code to ocram and run the low level hardware related code(set DDR IOs to high-Z state) in ocram. If there is no ocram space available, then system will still do suspend in external DDR, hence no DDR IOs will be set to high-Z. The OCRAM usage layout is as below, ocram suspend region(4K currently): ======================== high address ====================== . . . ^ ^ ^ imx6_suspend code PM_INFO structure(imx6_cpu_pm_info) ======================== low address ======================= Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-28Merge branch 'cubox-i-init' into for-linusRussell King1-0/+35
2014-01-27ARM: imx: initial SolidRun HummingBoard supportRussell King1-0/+35
Add support for the SolidRun HummingBoard. This commit adds support for the following interfaces on this board: - Consumer Ir receiver - S/PDIF output - Both USB interfaces - Gigabit Ethernet using AR8035 - UART port Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-31ARM: imx: use __initconst for const init definitionShawn Guo1-1/+1
0-DAY kernel build testing backend reports the following. scripts/checkpatch.pl 0001-ARM-imx-add-support-code-for-IMX50-based-machines.patch # many are suggestions rather than must-fix ERROR: Use of const init definition must use __initconst #80: arch/arm/mach-imx/mach-imx50.c:26: +static const char *imx50_dt_board_compat[] __initdata = { While at it, fix the error globally for IMX platform. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-09ARM: imx: add PCI fixup for PEX860X on Gateworks boardTim Harvey1-0/+30
The PEX860X has GPIO's which are used for PCI Reset lines on the Gateworks Ventana boards. The GPIO's need to be set as output level high so as to allow the PCIe devices to come out of reset. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-10-25PM / OPP: rename header to linux/pm_opp.hNishanth Menon1-1/+1
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp.h to pm_opp.h Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25PM / OPP: rename functions to dev_pm_opp*Nishanth Menon1-1/+1
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp_* accessors in OPP library with dev_pm_opp_* equivalent. Affected functions are: opp_get_voltage opp_get_freq opp_get_opp_count opp_find_freq_exact opp_find_freq_floor opp_find_freq_ceil opp_add opp_enable opp_disable opp_get_notifier opp_init_cpufreq_table opp_free_cpufreq_table Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-21ARM: imx: replace imx6q_restart() with mxc_restart()Shawn Guo1-32/+3
The imx6q_restart() works fine with normal reboot but will run into problem with emergency reboot like sysrq-b. In that case, of_iomap() gets called from interrupt context and hence triggers the BUG_ON in __get_vm_area_node(). Actually, since commit c1e31d1 (ARM: imx: create mxc_arch_reset_init_dt() for DT boot), imx6q/dl should try to use mxc_restart() by calling mxc_arch_reset_init_dt() beforehand, where things like of_iomap() can be done. The patch updates mxc_restart() a little bit to get it work for imx6q/dl and kill imx6q_restart() completely. Reported-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21ARM: imx6: report soc info via soc deviceShawn Guo1-1/+7
The patch enables soc bus infrastructure and adds a function imx_soc_device_init() to report soc info via soc device interface for imx6qdl and imx6sl. With the support, user space can get soc related info by looking at sysfs like below. $ cat /sys/devices/soc0/machine Freescale i.MX6 Quad SABRE Smart Device Board $ cat /sys/devices/soc0/family Freescale i.MX $ cat /sys/devices/soc0/soc_id i.MX6Q $ cat /sys/devices/soc0/revision 1.2 Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21ARM: imx: add a common function to initialize revision from anatopShawn Guo1-24/+1
The patch creates a common function imx_init_revision_from_anatop() by merging imx6q_init_revision() and imx_anatop_get_digprog(), so that any SoC that encodes revision info in anatop can use it to initialize revision. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21ARM: imx6q: use common soc revision helpersShawn Guo1-9/+4
It calls imx_set_soc_revision() to set up soc revision in imx6q_init_revision(), and replaces all the occurrences of imx6q_revision() with common helper imx_get_soc_revision(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21Merge remote-tracking branch 'shesselba/clk-of-init-v2_for-3.13' into imx/socShawn Guo1-11/+3
2013-09-29ARM: imx: remove custom .init_time hookSebastian Hesselbarth1-11/+3
With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-19cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 deviceSudeep KarkadaNagesha1-2/+7
Commit cdc58d602d2e657602a90c190cbf745886c95977 "cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes" assumed the pdev->dev is set to cpu0 device in the platform code. But it actually points to the virtual cpufreq-cpu0 platform device which is not present in the device tree. Most of the information needed by cpufreq is stored in cpu0 DT node. So cpu_dev must point to cpu0 device. This patch fixes the wrong assignment to cpu_dev. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds1-111/+60
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-08-22ARM: imx6q: remove board specific CLKO setupShawn Guo1-69/+0
The CLKO is widely used by imx6q board designs to clock audio codec. Since most codecs accept 24 MHz frequency, let's initially set up CLKO with OSC24M (cko <-- cko2 <-- osc). Then those board specific CLKO setup for audio codec can be removed. The board dts files also need an update on cko reference in codec node. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22phy: micrel: Add definitions for common Micrel PHY registersDinh Nguyen1-5/+8
Add defines for common Micrel PHY setups so that other platforms can use them. Update imx61 and sama5 hardware to use the micrel_phy.h PHY defines. Also add support for the KSZ9021RLRN PHY. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: David S. Miller <davem@davemloft.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx: Move anatop related from board file to anatop driverPeter Chen1-5/+0
Move anatop related (For USB) from board file to anatop driver Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-21cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodesSudeep KarkadaNagesha1-2/+1
Now that the cpu device registration initialises the of_node(if available) appropriately for all the cpus, parsing here is redundant. This patch removes all DT parsing and uses cpu->of_node instead. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-08-16ARM: imx: let L2 initialization be a common functionShawn Guo1-36/+1
Move imx6q L2 initialization function imx6q_init_l2cache() into system.c, and rename it imx_init_l2cache(), so that other platforms other than imx6q can also use the function. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2013-08-16ARM i.MX6Q: Use ENET_CLK_SEL defines in imx6q_1588_initPhilipp Zabel1-1/+4
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: i.MX6: add ethernet phy fixup for KSZ9031Sascha Hauer1-0/+23
The KSZ9031 is used on the i.MX6 based Data Modul eDM-QMX6 board. It needs the same fixup to the rx/tx delays as other i.MX6 boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: i.MX6: add ethernet phy fixup for AR8031Sascha Hauer1-0/+27
The AR8031 is used on the i.MX6 based sabreSD, sabreauto and wandboard. All need the same fixup, so add it for all i.MX6. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: i.MX6: call ksz9021 phy fixup for all i.MX6 boardsSascha Hauer1-4/+6
In current U-Boot the sabrelite, nitrogen6x and titanium all need the same fixup for the ksz9021 phy. Instead of limiting the fixup to a single board apply them for all. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt1-1/+2
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-17ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresdNicolin Chen1-0/+42
WM8962 needs 24MHz clock for its MCLK, so choose PLL4 as the parent of clko1. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx6: use common of_clk_init() call to initialize clocksShawn Guo1-1/+2
Instead of explicitly calling clock initialization functions, we can declare the functions with CLK_OF_DECLARE() and then call common of_clk_init() to have them invoked properly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: i.MX6: add i.MX6 specific L2 cache configurationDirk Behme1-1/+35
To improve the performance and power consumption add an i.MX6 specific L2 cache initialization. This configuration is taken from Freescale's kernel patch "ENGR00153601 [MX6]Adjust L2 cache parameter" [1] with two additional improvements: a) The L2X0_POWER_CTRL has only the two bits we set. So no need to read the register before. Remove the register read done in Freescale's patch. b) In the L2X0_PREFETCH_CTRL register, besides the double linefill (bit[30]), additionally enable the instruction and data prefetch (bit[29-28]). Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [1] http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_12.09.01&id=814656410b40c67a10b25300e51b0477b2bb96d1
2013-05-07Merge tag 'soc-for-linus-3' of ↵Linus Torvalds1-49/+25
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-12Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-49/+25
into next/soc2 From Shawn Guo: The imx soc changes for 3.10: * Enable anatop, well bisa and RBC for suspend to optimize the power consumption a little bit * Clock changes for TVE, LDB, PATA, SRTC support * Add System Reset Controller (SRC) support for imx5 and imx6 * Add initial imx6dl support based on imx6q code * Kconfig for cpufreq-cpu0, defconfig updates and few other changes * tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (275 commits) ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ARM: i.MX53 Add the cko1, cko2 clock outputs. staging: drm/imx: Use SRC to reset IPU ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC) ARM: imx: do not use regmap_read for ANADIG_DIGPROG ARM i.MX6q: set the LDB serial clock parent to the video PLL ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1 ARM i.MX6q: fix ldb di divider and selector clocks ARM i.MX53: fix ldb di divider and selector clocks ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags ... Signed-off-by: Olof Johansson <olof@lixom.net> Trivial change/change conflict in arch/arm/mach-imx/mach-imx6q.c resolved.
2013-04-12ARM: imx: add initial imx6dl supportShawn Guo1-9/+21
The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly compatible with i.MX6 Quad/Dual. And that's why we choose to support it using imx6q code with cpu_is_imx6dl() check when necessary. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12ARM: imx: do not use regmap_read for ANADIG_DIGPROGShawn Guo1-1/+1
Function imx_anatop_get_digprog() that reads register ANADIG_DIGPROG is called to identify silicon version. Users might query silicon version earlier than regmap subsystem is ready. For example, imx6q clock driver query revision in mx6q_clocks_init(), where regmap is not initialized yet. Change imx_anatop_get_digprog() to map anatop block and read ANADIG_DIGPROG in the native way, so that the function can work at very early stage. While at it, let's move imx_print_silicon_rev() back to imx6q_timer_init() to have the message show up a little earlier. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12ARM i.MX6q: export imx6q_revisionPhilipp Zabel1-1/+1
So it can be used in clk-imx6q.c for revision dependent clock tree setup. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12ARM: imx: enable anatop suspend/resumeAnson Huang1-42/+6
Anatop module have sereval configurations for user to reduce the power consumption in suspend, provide suspend/resume interface for further use and enable fet_odrive to reduce CORE LDO leakage during suspend. As we have a common anatop file, remove all the operations of anatop module in other files, use anatop interfaces to do that. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01ARM: mach-imx: mach-imx6q: Fix sparse warningsFabio Estevam1-2/+2
Fix the following sparse warnings: arch/arm/mach-imx/mach-imx6q.c:60:6: warning: symbol 'imx6q_restart' was not declared. Should it be static? arch/arm/mach-imx/mach-imx6q.c:223:24: warning: symbol 'imx6q_cpufreq_pdev' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11ARM: smp_twd: convert to use CLKSRC_OF initRob Herring1-3/+2
Now that we have OF based init with CLKSRC_OF, convert smp_twd init function to use it and covert all callers of twd_local_timer_of_register. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-omap@vger.kernel.org Cc: spear-devel@list.st.com Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-28Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+65
Pull ARM SoC i.MX DT changes from Olof Johansson: "This branch contains of devicetree changes for the Freescale i.MX platform. The base patch of the branch changes the format of the dts files to a slightly different format that makes it easier to do derivative board definitions, but it also introduces a lot of churn in the process since every line of the file is touched. On top of that are a handful of the regular changes; enabling more boards as DT-based instead of legacy board files (mx25pdk), enabling another driver for devicetree and thus adding bindings (onewire), etc. I'm not happy about the churn, and will likely not take it for other platforms in the future." * tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: dts: add dtsi for imx6q and imx6dl ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi ARM: dts: i.MX6: Add regulator delay support ARM: dts: Add device tree entry for onewire master on i.MX53 ARM: i.MX53: Add clocks for i.mx53 onewire master. W1: Add device tree support to MXC onewire master. ARM: imx: enable imx6q-cpufreq support ARM: dts: Add apf51 basic support ARM i.MX6: change mxs usbphy clock usage ARM: dts: imx6q: Remove silicon version from SDMA firmware ARM i.MX53: dts: add oftree for MBa53 baseboard ARM i.MX53: add dts for the TQ tqma53 module ARM: dts: imx53: pinctrl update ARM i.MX51 babbage: Add keypad support ARM: dts: imx: Add imx51 KPP entry ARM: dts: imx25-karo-tx25: Put status entry in the end ARM: mx25pdk: Add device tree support ARM: dts: imx: use nodes label in board dts ARM: dts: add missing imx dtb targets ARM: boot: dts: Add an entry for imx27-pdk.dtb ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 23:54:10 +0000