summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos
AgeCommit message (Collapse)AuthorFilesLines
2013-07-24Merge tag 'samsung-fixes-1' of ↵Olof Johansson7-28/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Samsung fixes for v3.11 - fix kernel booting on exynos5440 skip pm which is not supported update regarding LPAE features - fix s3c2440 uart with adding clkdev entries - fix compilatioin for Samsung SoCs with selecting pm - update ARCH_NR_GPIO to support exynos4412 has more gpios * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabled ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZE ARM: EXYNOS: skip pm support on exynos5440 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24ARM: EXYNOS: Fix low level debug supportYadwinder Singh Brar1-26/+0
Presently, using exynos_defconfig with CONFIG_DEBUG_LL and CONFIG_EARLY_PRIN on, kernel is not booting, we are getting following: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at mm/vmalloc.c:1134! [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc1 #633 [ 0.000000] task: c052ec48 ti: c0524000 task.ti: c0524000 [ 0.000000] PC is at vm_area_add_early+0x54/0x94 [ 0.000000] LR is at add_static_vm_early+0xc/0x60 Its because exynos[4/5]_map_io() function ioremaps a single 512KB memory size for all the four uart ports which envelopes the mapping created by debug_ll_io_init(), called earlier in exynos_init_io(). This patch removes iodesc entries for UART controller for all Samsung SoC's, since now the Samsung uart driver does a ioremap during probe and any needed iomapping for earlyprintk will be handled by debug_ll_io_init(). Tested on smdk4412 and smdk5250. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: SAMSUNG: Add SAMSUNG_PM config option to select pmAmit Daniel Kachhap3-2/+2
This patch enables the selection of samsung pm related stuffs when SAMSUNG_PM config is enabled and not just when generic PM config is enabled. Power management for s3c64XX and s3c24XX is enabled by default and for other platform depends on S5P_PM. This patch also fixes the following compilation error's when compiling a platform like exynos5440 which does not select pm stuffs. arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys': linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq': linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq': linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake': linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter': linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core' linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint' linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core' make: *** [vmlinux] Error 1 Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-16ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabledThomas Abraham1-0/+1
Allow 64-bit DMA addresses if LPAE is enabled on EXYNOS5440. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-16ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZESubash Patel1-0/+5
On EXYNOS5440 there is DRAM on the 36-bit address range. Hence this patch converts the MAX_PHYSMEM_BITS macro to 36 if LPAE is enabled for the ARM architecture. The conventional section size on EXYNOS is 256M due to sparsemem. Since EXYNOS5440 has memory in multiples of 1G in 32-bit and 36-bit range, this has now been modified to 31. Signed-off-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-16ARM: EXYNOS: skip pm support on exynos5440Kukjin Kim1-0/+6
EXYNOS5440 doesn't support PM and current single image for EXYNOS will be break without this patch. Actually, SSDK5440 cannot boot without this so this should be merged during rc. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-14arm: delete __cpuinit/__CPUINIT usage from all ARM usersPaul Gortmaker2-4/+2
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is our first set of fixes from arm-soc for 3.11. - A handful of build and warning fixes from Arnd - A collection of OMAP fixes - defconfig updates to make the default configs more useful for real use (and testing) out of the box on hardware And a couple of other small fixes. Some of these have been recently applied but it's normally how we deal with fixes, with less bake time in -next needed" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) arm: multi_v7_defconfig: Tweaks for omap and sunxi arm: multi_v7_defconfig: add i.MX options and NFS root ARM: omap2: add select of TI_PRIV_EDMA ARM: exynos: select PM_GENERIC_DOMAINS only when used ARM: ixp4xx: avoid circular header dependency ARM: OMAP: omap_common_late_init may be unused ARM: sti: move DEBUG_STI_UART into alphabetical order ARM: OMAP: build mach-omap code only if needed ARM: zynq: use DT_MACHINE_START ARM: omap5: omap5 has SCU and TWD ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver ARM: OMAP2+: devices: remove duplicated include from devices.c ARM: OMAP3: igep0020: Set DSS pins in correct mux mode. ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" ARM: OMAP2+: Remove obsolete Makefile line ARM: OMAP5: Enable Cortex A15 errata 798181 ...
2013-07-12Merge tag 'omap-for-v3.11/fixes-for-merge-window' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Omap fixes and minor defconfig updates that would be good to get in before -rc1. * tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver ARM: OMAP2+: devices: remove duplicated include from devices.c ARM: OMAP3: igep0020: Set DSS pins in correct mux mode. ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" ARM: OMAP2+: Remove obsolete Makefile line ARM: OMAP5: Enable Cortex A15 errata 798181 ARM: scu: provide inline dummy functions when SCU is not present ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4 ARM: OMAP2+: timer: initialize before using oh_name Signed-off-by: Olof Johansson <olof@lixom.net> Add/move/change conflicts in arch/arm/mach-omap2/Kconfig resolved.
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2-4/+5
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-06ARM: exynos: select PM_GENERIC_DOMAINS only when usedArnd Bergmann1-1/+1
This fixes building exynos kernels with CONFIG_PM disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kukjin Kim <kgene.kim@samsung.com>
2013-07-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: "This contains the usual updates from other people (listed below) and the usual random muddle of miscellaneous ARM updates which cover some low priority bug fixes and performance improvements. I've started to put the pull request wording into the merge commits, which are: - NoMMU stuff: This includes the following series sent earlier to the list: - nommu-fixes - R7 Support - MPU support I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were discussing today until we've reached a conclusion/that's had some more review. This is rebased (and re-tested) on your devel-stable branch because otherwise there were going to be conflicts with Uwe's V7M work now that you've merged that. I've included the fix for limiting MPU to CPU_V7. - Huge page support These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250). - LPAE updates Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon. - arch_timer cleanups Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting, but have been rebased to v3.10-rc3. - mpidr linearisation (multiprocessor id register - identifies which CPU number we are in the system) This patch series that implements MPIDR linearization through a simple hashing algorithm and updates current cpu_{suspend}/{resume} code to use the newly created hash structures to retrieve context pointers. It represents a stepping stone for the implementation of power management code on forthcoming multi-cluster ARM systems. It has been tested on TC2 (dual cluster A15xA7 system), iMX6q, OMAP4 and Tegra, with processors hitting low-power states requiring warm-boot resume through the cpu_resume code path" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: 7775/1: mm: Remove do_sect_fault from LPAE code ARM: 7777/1: Avoid extra calls to the C compiler ARM: 7774/1: Fix dtb dependency to use order-only prerequisites ARM: 7770/1: remove residual ARMv2 support from decompressor ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator ARM: 7767/1: let the ASID allocator handle suspended animation ARM: 7766/1: versatile: don't mark pen as __INIT ARM: 7765/1: perf: Record the user-mode PC in the call chain. ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork ARM: kernel: implement stack pointer save array through MPIDR hashing ARM: kernel: build MPIDR hash function data structure ARM: mpu: Ensure that MPU depends on CPU_V7 ARM: mpu: protect the vectors page with an MPU region ARM: mpu: Allow enabling of the MPU via kconfig ARM: 7758/1: introduce config HAS_BANDGAP ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting ARM: 7751/1: zImage: don't overwrite ourself with a page table ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace ...
2013-07-02Merge tag 'late-for-linus' of ↵Linus Torvalds5-14/+34
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds41-8230/+41
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-29Merge branch 'devel-stable' into for-nextRussell King1-1/+1
Conflicts: arch/arm/Makefile arch/arm/include/asm/glue-proc.h
2013-06-26ARM: EXYNOS: Enable PCIe support for Exynos5440Jingoo Han1-0/+2
Enable PCIe support for Exynos5440 which has two PCIe controllers. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'remove-nondt-exynos-3' of ↵Arnd Bergmann40-8226/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: cleanup and removing dead code for only support DT for exynos - remove board file for exynos - remove legacy files which are not used anymore - decouple ARCH_EXYNOS from PLAT_S5P * tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits) ARM: EXYNOS: Remove remaining dead code after non-DT support removal ARM: EXYNOS: Remove legacy L2X0 initialization ARM: EXYNOS: Use exynos_init_io() as map_io callback ARM: EXYNOS: Remove custom init_irq callbacks ARM: EXYNOS: Remove mach/regs-usb-phy.h header thermal: exynos: Support both EXYNOS4X12 SoCs ARM: EXYNOS: Remove unused base addresses from mach/map.h header ARM: EXYNOS: Remove mach/irqs.h header ARM: EXYNOS: Select SPARSE_IRQ for Exynos ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS ARM: EXYNOS: Remove mach/regs-gpio.h header ARM: EXYNOS: Remove mach/gpio.h ARM: EXYNOS: Remove setup-i2c0.c ARM: EXYNOS: Do not select legacy Kconfig symbols any more ARM: SAMSUNG: Include most of mach/ headers conditionally ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P USB: Check for ARCH_EXYNOS separately platform: Check for ARCH_EXYNOS separately ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header ... Conflicts: arch/arm/mach-exynos/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: EXYNOS: extend soft-reset support for EXYNOS5420Chander Kashyap1-7/+4
Extend the soft reset support for EXYNOS5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420Chander Kashyap1-0/+2
The location at which the boot address is specified for secondary CPUs of EXYNOS5420 is SYSRAM base + 4. Update the cpu_boot_reg function accordingly. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: use four additional chipid bits to identify EXYNOS familyChander Kashyap1-4/+3
Use chipid[27:20] bits to identify the EXYNOS family while setting up the serial port during the uncompression setup. This uses four additional bits of chipid to identify the EXYNOS family since this is required for identifying EXYNOS5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Add support for EXYNOS5420 SoCChander Kashyap3-0/+18
EXYNOS5420 is new SoC in Samsung's Exynos5 SoC series. Add initial support for this new SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: list the CPU nodes for EXYNOS5250Chander Kashyap1-3/+7
Instead of having to specify the number for CPUs in EXYNOS5250 in platsmp.c file, let the number of CPUs be determined by having this information listed in EXYNOS5250 device tree file. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: call scu_enable() only in case of cortex-A9 processorLeela Krishna Amudala1-1/+1
This patch reads the cpuid part number and if it matches with cortex-A9, calls scu_enable() Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip levelDoug Anderson1-3/+6
Previously if you had MACH_EXYNOS5_DT but not MACH_EXYNOS4_DT you'd be missing the pincontrol definitions. Move PINCTRL selects to the arch level since we should be enabling the code for all exynos variants. Update the PINCTRL descriptions to indicate that PINCTRL_EXYNOS is not for exynos5440. Also add basic dependencies for the PINCTRL_EXYNOS kernel config. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Enable XHCI support on exynos5Vivek Gautam1-0/+1
This patch enables support for XHCI on exynos5 series of SOCs, to support host side USB 3.0 support. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: SAMSUNG: Consolidate uncompress subroutineTushar Behera1-3/+0
For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove remaining dead code after non-DT support removalArnd Bergmann3-26/+2
This patch removes remaining small bits of unused code that was left after removing non-DT support. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove legacy L2X0 initializationArnd Bergmann1-44/+4
Since Exynos is now supporting only DT-based boot, the old L2X0 initialization code is not needed anymore, so exynos4_l2x0_cache_init() can be greatly simplified. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Use exynos_init_io() as map_io callbackArnd Bergmann4-17/+4
Since there is no board specific mapping needed on Exynos, exynos_init_io() can be simplified and used as map_io callback for both Exynos4 and Exynos5. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove custom init_irq callbacksArnd Bergmann4-14/+0
Since both exynos4_init_irq() and exynos5_init_irq() are just calling irqchip_init(), there is no need for them to exist any more, since this is the default that is called when init_irq callback is not specified. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/regs-usb-phy.h headerTomasz Figa1-74/+0
This patch removes mach/regs-usb-phy.h header, which is not used anywhere in the kernel. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove unused base addresses from mach/map.h headerTomasz Figa1-214/+0
This patch removes all the unused base addresses from mach/map.h header, leaving only addresses of IPs that currently use static IO mapping or need the address hardcoded, like low level debug UART. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/irqs.h headerTomasz Figa1-476/+0
Since Exynos now uses CONFIG_SPARSE_IRQ and all remaining users of this header has been fixed, we can safely remove it. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Select SPARSE_IRQ for ExynosTomasz Figa1-0/+1
This patch adds selection of CONFIG_SPARSE_IRQ for ARCH_EXYNOS, since it is required by multiplatform and allows to remove the legacy mach/irqs.h header. To make this possible, a dummy IRQ_EINT_BIT macro is added to pm-core.h header to allow plat-samsung/pm.c compile. This macro is irrelevant for Exynos and will be removed after reworking Samsung pm code for multiplatform compatibility. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/regs-gpio.h headerTomasz Figa3-42/+0
Contents of this header are not used any more and can be safely removed. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/gpio.hTomasz Figa1-289/+0
This patch removes mach/gpio.h header that is not required any more on Exynos. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove setup-i2c0.cTomasz Figa2-23/+0
Now since SAMSUNG_ATAGS is no longer selected for ARCH_EXYNOS, we can safely remove the remaining setup code. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5PTomasz Figa1-0/+1
After removing support for ATAGS based boot on Exynos, there is not much that can be shared between Exynos and other S5P platforms. This patch makes Exynos a standalone Samsung platform, not using PLAT_S5P. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h headerTomasz Figa1-0/+4
This patch adds several compatibility definitions that are not relevant for Exynos, but are required by Samsung PM core. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy power domain registration codeTomasz Figa1-93/+1
This patch removes static definitions of power domains and code responsible for registering them and adding devices to them, since only DT based boot is now supported on Exynos. Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove check for device tree presenceTomasz Figa1-12/+10
This patch makes the firmware setup code assume presence of DT, since it is now the only way of booting supported for Exynos. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy mapping of chip ID blockTomasz Figa1-13/+1
This patch removes static mapping of chip ID block that was used when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove platform device initializationTomasz Figa1-37/+0
This patch removes legacy platform device initialization code that was used to set names and other parameters of static platform devices when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy timer initialization codeTomasz Figa1-37/+2
This patch removes legacy timer initialization code that was used to set up system timers when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy interrupt initialization codeTomasz Figa1-29/+1
This patch removes legacy IRQ initialization code that was used to set up interrupt handling when booting with ATAGS, which is not supported any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy dev- and setup- filesTomasz Figa17-1026/+0
This patch removes now unused files containing old device and GPIO setup code that was needed for ATAGS based boot, which is not supported on Exynos any more. The only exception is setup-i2c0.c that will be removed later, since it has dependencies in plat-samsung/ directory. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy UART initialization codeTomasz Figa1-17/+0
This patch removes legacy UART initialization code that was used to set up UART platform devices when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy EINT initialization codeTomasz Figa1-307/+0
This patch removes legacy EINT initialization code that was used to handle external interrupts when booting with ATAGS, which is not supported any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Remove legacy PMU initialization codeTomasz Figa1-27/+0
This patch removes legacy PMU initialization code that was used to set up PMU when booting with ATAGS, which is not supported any more. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-15ARM: EXYNOS: Make ARCH_EXYNOS select USE_OFTomasz Figa1-2/+0
Since EXYNOS is now DT-only, it always requires USE_OF option to be selected. This patch moves USE_OF selection from entries of DT board files to ARCH_EXYNOS. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 08:53:16 +0000