summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos/common.h
AgeCommit message (Collapse)AuthorFilesLines
2013-07-24ARM: SAMSUNG: Add SAMSUNG_PM config option to select pmAmit Daniel Kachhap1-1/+0
This patch enables the selection of samsung pm related stuffs when SAMSUNG_PM config is enabled and not just when generic PM config is enabled. Power management for s3c64XX and s3c24XX is enabled by default and for other platform depends on S5P_PM. This patch also fixes the following compilation error's when compiling a platform like exynos5440 which does not select pm stuffs. arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys': linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq': linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq': linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake': linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter': linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core' linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint' linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core' make: *** [vmlinux] Error 1 Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt1-2/+3
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-19ARM: EXYNOS: Use exynos_init_io() as map_io callbackArnd Bergmann1-1/+1
Since there is no board specific mapping needed on Exynos, exynos_init_io() can be simplified and used as map_io callback for both Exynos4 and Exynos5. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove custom init_irq callbacksArnd Bergmann1-2/+0
Since both exynos4_init_irq() and exynos5_init_irq() are just calling irqchip_init(), there is no need for them to exist any more, since this is the default that is called when init_irq callback is not specified. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-25ARM: EXYNOS: Fix support of Exynos4210 rev0 SoCTomasz Figa1-0/+2
This patch extends exynos_init_time() function to handle Exynos4210 rev0 SoC, which differs in availability of system timers and needs different clocksource initialization. This makes it possible to use exynos_init_time() function as init_time callback for all Exynos-based boards, including Universal_C210, which originally had to use samsung_timer_init(). Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-07Merge tag 'multiplatform-for-linus-2' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...
2013-04-19irqchip: exynos: pass irq_base from platformArnd Bergmann1-1/+1
The platform code knows the IRQ base, while the irqchip driver should really not. This is a littly hacky because we still hardwire the IRQ base to 160 for the combiner in the DT case, when we should really use -1. Removing that line will cause a linear IRQ domain to be use, as we should. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-19irqchip: exynos: pass max combiner number to combiner_initArnd Bergmann1-1/+2
We can find out the number of combined IRQs from the device tree, but in case of ATAGS boot, the driver currently uses hardcoded values based on the SoC type. We can't do that in general for a multiplatform kernel, so let's instead pass this information from platform code directly in case of ATAGS boot. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-19clocksource: exynos_mct: remove platform header dependencyArnd Bergmann1-1/+1
For the non-DT case, the mct_init() function requires access to a couple of platform specific constants, but cannot include the header files in case we are building for multiplatform. This changes the interface to the platform so we pass all the necessary data as arguments to mct_init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org>
2013-04-19clk: exynos: prepare for multiplatformArnd Bergmann1-1/+1
The new common clock drivers for exynos are using compile time constants and soc_is_exynos* macros to provide backwards compatibility for pre-DT systems, which is not possible with multiplatform kernels. This moves all the necessary information back into platform code and removes the mach/* header inclusions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@linaro.org>
2013-04-09ARM: EXYNOS: Add support for Exynos secure firmwareTomasz Figa1-0/+2
Some Exynos-based boards contain secure firmware and must use firmware operations to set up some hardware. This patch adds firmware operations for Exynos secure firmware and a way for board code and device tree to specify that they must be used. Example of use: In board code: ...MACHINE_START(...) /* ... */ .init_early = exynos_firmware_init, /* ... */ MACHINE_END In device tree: / { /* ... */ firmware@0203F000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; /* ... */ }; Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: EXYNOS: allow legacy board support to specify xxti and xusbxti clock speedThomas Abraham1-0/+1
The clock speed of xxti and xusbxti clocks depends on the oscillator used on the board to generate these clocks. For non-dt platforms, allow the board support for those platforms to set the clock frequency of xxti and xusbxti clocks. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: EXYNOS: Migrate clock support to common clock frameworkThomas Abraham1-0/+7
Remove Samsung specific clock support in Exynos4/5 and migrate to use common clock framework. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-09ARM: EXYNOS: allow dt based discovery of mct controller using ↵Thomas Abraham1-1/+1
clocksource_of_init Add entries to __clksrc_of_table so that Exynos MCT controller is discoverable using call to clocksource_of_init. With this change, it would be appropriate to rename the function 'exynos4_timer_init' as 'mct_init' since it aptly describes this function. Additionally, the 'init_time' callback of all machine descriptors for exynos platforms that were previously set to 'exynos4_timer_init' are now set to either 'mct_init' or 'clocksource_of_init'. Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-12ARM: exynos: move exynos4210-combiner to drivers/irqchipRob Herring1-0/+3
Exynos boot is broken with commit 0529e315 (ARM: use common irqchip_init for GIC init). This commit split the irqchip initialization into 2 calls to of_irq_init. This does not work because of_irq_init requires interrupt parents to be in the match list. Rather than reverting exynos changes, make it do the proper thing by using IRQCHIP_DECLARE. This requires moving the combiner code to drivers/irqchip. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04Merge branch 'next/cleanup-header' of ↵Olof Johansson1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim: AS I commented, this makes <mach/*.h> local so that they could be removed. * 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits) ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled ARM: S3C64XX: make regs-syscon-power.h local ARM: S3C64XX: make regs-sys.h local ARM: S3C64XX: make regs-srom.h local ARM: S3C64XX: make regs-modem.h local ARM: S3C64XX: make regs-gpio-memport.h local ARM: S3C64XX: make crag6410.h local ARM: S3C24XX: remove dsc.c and make regs-dsc.h local ARM: S3C24XX: remove idle.h ARM: S3C2412: cleanup regs-s3c2412.h ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local ARM: S3C24XX: make otom-map.h local ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local ARM: S3C24XX: make h1940.h and h1940-latch.h local ARM: S3C24XX: make gta02.h local ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h ARM: SAMSUNG: cleanup mach/regs-audss.h file ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-10ARM: EXYNOS: move mach/pmu.h file into common.hKukjin Kim1-0/+20
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-17ARM: exynos: Fix warning due to missing 'inline' in stubOlof Johansson1-1/+1
In file included from arch/arm/mach-exynos/clock-exynos5.c:29:0: arch/arm/mach-exynos/common.h:28:12: warning: 'exynos_pm_late_initcall' defined but not used [-Wunused-function] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Shawn Guo <shawn.guo@linaro.org>
2012-09-14ARM: SoC: convert Exynos4 to SMP operationsMarc Zyngier1-0/+5
Convert Exynos4 to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-08ARM: exynos: use machine specific hook for late initShawn Guo1-0/+7
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14ARM: EXYNOS: add support for EXYNOS5250 SoCKukjin Kim1-0/+11
This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores. Since actually, most codes in mach-exynos/ are used commonly for EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented in mach-exynos/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14ARM: EXYNOS: to declare static for mach-exynos/common.cKukjin Kim1-17/+11
According to commit cc511b8d84d8 ("ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]"), we don't need to declare extern for exynos4_map_io(), exynos4_init_clocks(), exynos4_init_uarts(), and exynos_init(). And the exynos4210_register_clocks() and exynos4212_register_clocks depend on each SoC not ARCH_EXYNOS4. So this patch fixed above. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clockKukjin Kim1-0/+9
This patch changes prefix of the clk register from S5P_ to EXYNOS4_ for new EXYNOS SoCs such as EXYNOS5 and adds prefix exynos4_ on clk declarations. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-05ARM: 7262/1: restart: EXYNOS: use new restart hookRussell King1-0/+2
Hook these platforms restart code into the new restart hook rather than using arch_reset(). [kgene.kim@samsung.com: according to local header, updated] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-03ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]Kukjin Kim1-0/+39
This patch introduces common.[ch] which are used only in the arch/arm/mach-exynos/ directory. The common.c file merges the cpu.c, init.c, irq-combiner.c and irq-eint.c files which are used commonly on EXYNOS SoCs and the common.h file replaces with plat/exynos4.h file. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 06:25:04 +0000