summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-dove
AgeCommit message (Collapse)AuthorFilesLines
2020-03-13arm: mach-dove: Mark dove_io_desc as __maybe_unusedVincenzo Frascino1-1/+1
Without this, we get the warnings below when CONFIG_MMU is disabled: linux/arch/arm/mach-dove/common.c:51:24: warning: ‘dove_io_desc’ defined but not used [-Wunused-variable] static struct map_desc dove_io_desc[] __initdata = { ^~~~~~~~~~~~ Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-08-14ARM: orion/mvebu: unify debug-ll virtual addressesArnd Bergmann1-5/+5
In a multiplatform configuration, enabling DEBUG_LL breaks booting on all platforms with incompatible settings. In case of the Marvell platforms of the Orion/MVEBU family, the physical addresses are all the same, we just map them at different virtual addresses, which makes it impossible to run a kernel with DEBUG_LL enabled on a combination of the merged mvebu and the legacy boardfile based platforms. This is easily solved by using the same virtual address everywhere. I picked the address that is already used by mach-mvebu for UART0: 0xfec12000. All these platforms have a 1MB region with their internal registers, almost always at physical address 0xf1000000, so I'm updating the iotable for that entry. In case of mach-dove, this is slightly trickier, as the existing mapping is 8MB and a second 8MB mapping is already at the 0xfec00000 address. I have verified from the datasheet that the last 7MB of the physical mapping are "reserved" and nothing in Linux tries to use it either. I'm putting this 1MB mapping at the same address as the others, and the second 8MB register area immediately before that. Link: https://lore.kernel.org/r/20190731195713.3150463-14-arnd@arndb.de Link: https://lore.kernel.org/linux-arm-kernel/87si3eb1z8.fsf@free-electrons.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14ARM: dove: clean up mach/*.h headersArnd Bergmann12-44/+17
This is a simple move of all header files that are no longer included by anything else from the include/mach directory to the platform directory itself as preparation for multiplatform support. The mach/uncompress.h headers are left in place for now, and are mildly modified to be independent of the other headers. They will be removed entirely when ARCH_MULTIPLATFORM gets enabled and they become obsolete. Rather than updating the path names inside of the comments of each header, I delete those comments to avoid having to update them again, should they get moved or copied another time. Link: https://lore.kernel.org/r/20190731195713.3150463-13-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon1-1/+1
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-06-28ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi1-5/+12
The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert ARM bios32 code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in warning fix from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20170621215323.3921382-1-arnd@arndb.de] [bhelgaas: set bridge->ops for mv78xx0] [bhelgaas: fold in fixes from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>: http://lkml.kernel.org/r/20170701135457.GB8977@red-moon] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch>
2016-04-27ARM: dove: Remove CLK_IS_ROOTStephen Boyd1-2/+1
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-25ARM: orion: only select I2C_BOARDINFO when using I2CArnd Bergmann1-1/+1
If we select I2C_BOARDINFO and I2C is disabled, we get a harmless Kconfig warning: warning: (MACH_DOVE_DB && MACH_DB88F5281 && MACH_RD88F5182 && MACH_RD88F5182_DT && MACH_KUROBOX_PRO && MACH_DNS323 && MACH_LINKSTATION_PRO && MACH_LINKSTATION_LSCHL && MACH_LINKSTATION_LS_HGL && MACH_NET2BIG) selects I2C_BOARDINFO which has unmet direct dependencies (I2C) Making the select itself conditional avoids the warning and makes the kernel slightly smaller as the compiler will be able to drop the unused board info. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-08ARM: dove: convert legacy dove to PMU supportRussell King3-102/+32
Since Dove has non-DT support for various facilities in the PMU, convert the legacy support to use the new PMU driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: use SPARSE_IRQ everywhereArnd Bergmann6-3/+7
As a preparation for multiplatform support, this moves all the code using plat-orion over to use sparse irq support, which is enabled implicitly for multiplatform. In particular, the hardcoded NR_IRQS macro gets replaced with a machine specific one that is set in the machine descriptor in order to set up a static mapping for all legacy interrupts. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: always use MULTI_IRQ_HANDLERArnd Bergmann2-44/+1
As a preparation for multiplatform support, this enables the MULTI_IRQ_HANDLER code unconditionally on dove and orion5x, and introduces the respective code on mv78xx0, which did not have it so far. The classic entry-macro.S files are removed as they are now obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07ARM: orion: move watchdog setup to mach-orion5xArnd Bergmann1-0/+17
The watchdog device node is created in plat-orion/common.c but depends on the bridge address that is platform specific, so as a preparation for orion multiplatform support, we move it out of the common code into orion5x and dove. At the moment, dove does not use the watchdog, so I'm marking the function as __maybe_unused for the moment. The compiler will be able to compile out the device definition this way, and we can easily add it later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-3/+3
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-05Merge branch 'queue/irq/arm' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next/cleanup Merge "ARM: Interrupt cleanups and API change preparation" from Thomas Gleixner: The following patch series contains the following changes: - Consolidation of chained interrupt handler setup/removal - Switch to functions which avoid a redundant interrupt descriptor lookup - Preparation of interrupt flow handlers for the 'irq' argument removal * 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal ARM/pxa: Prepare balloon3_irq_handler for irq argument removal ARM/pxa: Prepare *_irq_handler for irq argument removal ARM/dove: Prepare pmu_irq_handler for irq argument removal ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal ARM/locomo: Prepare locomo_handler for irq argument removal ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc ARM/LPC32xx: Use irq_set_handler_locked() ARM/irq: Use access helper irq_data_get_affinity_mask() ARM/locomo: Consolidate chained IRQ handler install/remove ARM/orion: Consolidate chained IRQ handler install/remove Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: kill off set_irq_flags usageRob Herring1-1/+1
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-13ARM/dove: Prepare pmu_irq_handler for irq argument removalThomas Gleixner1-1/+2
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Russell King <linux+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
2015-06-24ARM: dove: fix legacy dove IRQ numbersRussell King2-63/+63
v3.18 changed handle_IRQ() to call __handle_domain_irq(), which now rejects attempts to deliver IRQ0. Since IRQ 0 is used as the timer interrupt (just like the PIT on x86), this causes boot to fail as the bogomips calibration never completes. Fix this by shuffling all interrupts up by one. Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-19PCI: Cleanup control flowBjorn Helgaas1-8/+4
Return errors immediately so the straightline path is the normal, no-error path. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-26ARM: orion: switch to a per-platform handle_irq() functionThomas Petazzoni1-0/+36
Moving to the Device Tree implies having CONFIG_MULTI_IRQ_HANDLER enabled, even for non-DT platforms (if we want both DT and non-DT platforms to be supported in a single kernel). However, the common CONFIG_MULTI_IRQ_HANDLER handler for non-DT platforms in plat-orion/irq.c doesn't match the needs of Orion5x. Also, it doesn't make much sense for orion_irq_init() to register the multi-IRQ handler: orion_irq_init() is called once for each IRQ cause/mask tuple, while the multi-IRQ handler only needs to be registered once. To solve this problem, we move the multi-IRQ handle in per-platform code: mach-kirkwood/irq.c and mach-dove/irq.c. The Orion5x variant will be introduced in a followup commit. Of course, this code will ultimately be completely removed once all boards are converted to the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-23-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds3-56/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-03-04ARM: mvebu: move DT Dove to MVEBUSebastian Hesselbarth3-56/+0
With all the DT support preparation done, we are able to move Dove to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot for a while before removal. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22watchdog: orion: Make RSTOUT register a separate resourceEzequiel Garcia1-0/+1
In order to support other SoC, it's required to distinguish the 'control' timer register, from the 'rstout' register that enables system reset on watchdog expiration. To prevent a compatibility break, this commit adds a fallback to a hardcoded RSTOUT address. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Tested-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-18Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-9/+0
next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König1-9/+0
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-11-24ARM: Dove: Fix compiler warnings with C=1 buildsAndrew Lunn1-12/+3
Add missing static keywords. Remove the unused function dove_crypto_init(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-11Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-38/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. In this case it's involved: - Some Davinci driver updates that has required corresponding platform code changes (gpio mostly) - CCI bindings and a few driver updates - Marvell mvebu patches for PCI MSI support (could have gone through the PCI tree for this release, but they were acked by Bjorn for 3.12 so we kept them through arm-soc). - Marvell dove switch-over to DT-based PCIe configuration - Misc updates for Samsung platform dmaengine drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller ARM: S3C24XX: Fix possible dma selection warning PCI: mvebu: make local functions static PCI: mvebu: add I/O access wrappers PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug ARM: mvebu: fix gated clock documentation ARM: dove: remove legacy pcie and clock init ARM: dove: switch to DT probed mbus address windows ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 dmaengine: add driver for Samsung s3c24xx SoCs ARM: S3C24XX: number the dma clocks PCI: mvebu: add support for Marvell Dove SoCs PCI: mvebu: add support for reset on GPIO PCI: mvebu: remove subsys_initcall PCI: mvebu: increment nports only for registered ports PCI: mvebu: move clock enable before register access PCI: mvebu: add support for MSI irqchip: armada-370-xp: implement MSI support ...
2013-10-08ARM: dove: remove legacy pcie and clock initSebastian Hesselbarth1-29/+0
With DT support for PCIe controllers on Dove, we can now remove the legacy pcie init and the last remaining clock workaround for its clocks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-08ARM: dove: switch to DT probed mbus address windowsSebastian Hesselbarth1-9/+1
With proper mbus ranges and all internal nodes moved over, we can now switch from static address window allocation to DT probed allocation. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-29ARM: dove: remove custom .init_time hookSebastian Hesselbarth1-11/+0
With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. While at it, also remove some obsolete includes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds3-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds1-23/+45
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-06Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC low-priority fixes from Olof Johansson: "This branch contains a handful of fixes for various platforms that weren't serious enough to be included in late 3.11-rc releases. Most of them are for minor cleanups and cosmetic fixes. There's also a bit of code removal here, one board file removal for clps711x, and removal of some legacy device creation on OMAP2+" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start' ARM: OMAP2: remove useless variable 'ret' ARM: OMAP: dma: fix error return code in omap_system_dma_probe() ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards ARM: OMAP2: Use a consistent AM33XX SoC option description ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC ARM: clps711x: edb7211: Remove extra iotable_init() call ARM: clps711x: autcpu12: Remove incorrect config checking ARM: clps711x: Drop fortunet board support ARM: clps711x: Remove the special name for the syscon driver ARM: dts: Fix memory node in skeleton64.dtsi ARM: Keystone: Convert device tree file to use IRQ defines ARM: keystone: use #include to include skeleton.dtsi ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc() ARM: Keystone: No need to preserve r12 across smc call ARM: keystone: remove redundant smp_init_cpus definition ARM: keystone: drop useless HAVE_SCHED_CLOCK ARM: dove: fix missing __init section of dove_mpp_gpio_mode ARM: shmobile: armadillo800eva-reference: fix compiler warning ...
2013-09-05Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-19/+0
Pull ARM updates from Russell King: "This set includes adding support for Neon acceleration of RAID6 XOR code from Ard Biesheuvel, cache flushing and barrier updates from Will Deacon, and a cleanup to the ARM debug code which reduces the amount of code by about 500 lines. A few other cleanups, such as constifying the machine descriptors which already shouldn't be written to, cleaning up the printing of the L2 cache size" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits) ARM: 7826/1: debug: support debug ll on hisilicon soc ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines ARM: 7827/1: highbank: fix debug uart virtual address for LPAE ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022 ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port ARM: debug: move SPEAr debug to generic PL01x code ARM: debug: move davinci debug to generic 8250 code ARM: debug: move keystone debug to generic 8250 code ARM: debug: remove DEBUG_ROCKCHIP_UART ARM: debug: provide generic option choices for 8250 and PL01x ports ARM: debug: move PL01X debug include into arch/arm/include/debug/ ARM: debug: provide PL01x debug uart phys/virt address configuration options ARM: debug: add support for word accesses to debug/8250.S ARM: debug: move 8250 debug include into arch/arm/include/debug/ ARM: debug: provide 8250 debug uart phys/virt address configuration options ARM: debug: provide 8250 debug uart register shift configuration option ARM: debug: provide 8250 debug uart flow control configuration option ...
2013-08-25ARM: debug: move 8250 debug include into arch/arm/include/debug/Russell King1-8/+0
Now that the 8250 debug include can stand alone without requiring platforms to provide any macros, move it into the debug directory so it can be directly included. This allows us to get rid of a lot of debug-macros include files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: debug: provide 8250 debug uart phys/virt address configuration optionsRussell King1-10/+0
Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: debug: provide 8250 debug uart register shift configuration optionRussell King1-1/+0
Move the definition of the UART register shift out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-06ARM: dove: Move to ID based window creationThomas Petazzoni1-23/+45
With the introduction of the ID based MBus API, it's better to switch to use it instead of the current name based scheme. This will allow to deprecate the name based API, once every user is removed. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-05ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma driversRussell King1-2/+2
These really should be a single driver because they're fully integrated in hardware. Make them so. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25ARM: dove: convert to DT irqchip and clocksourceSebastian Hesselbarth3-9/+20
With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Dove boards. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25ARM: dove: remove legacy mv643xx_eth setupSebastian Hesselbarth1-9/+0
With DT support for mv643xx_eth we do not need legacy platform_data based setup for DT enabled boards anymore. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-25ARM: dove: fix missing __init section of dove_mpp_gpio_modeSebastian Hesselbarth1-1/+1
Legacy dove_mpp_gpio_mode calls orion_gpio_set_valid which is in __init section. Offending function is not, so this causes a section mismatch. To fix the mismatch, also move dove_mpp_gpio_mode to __init section. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-11Watchdog: allow orion_wdt to be built for DoveRussell King1-0/+1
The watchdog infrastructure in Dove is no different from that in Orion5x or Kirkwood, so let's enable it for Dove. The only things missing are a few register settings in Dove's bridge-regs.h. Rather than duplicating the same register bit masks for the RSTOUTn_MASK and BRIDGE_CAUSE registers, move the definitions into the watchdog driver itself. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2-2/+4
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-29ARM: dove: move DT boards to SoC-centric clock initSebastian Hesselbarth3-5/+2
SoC centric clock init for Dove can be used by calling of_clk_init. Use it and get rid of mvebu_clocks_init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15arm: mach-dove: convert to use mvebu-mbus driverThomas Petazzoni6-129/+46
This commit migrates the mach-dove platforms to use the mvebu-mbus driver and therefore removes the Dove-specific addr-map code. The dove_init_early() function now initializes the mvebu-mbus driver by calling mvebu_mbus_init(). The address decoding windows are now registered in the dove_setup_cpu_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Dove has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28Merge tag 'late-mvebu-rebased' of ↵Linus Torvalds4-86/+102
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC mvebu platform changes from Olof Johansson: "This series contains changes for the Marvell EBU platforms (mvebu, orion, kirkwood, dove) that were not part of the first set of pull requests because of dependencies on the MMC tree, and being submitted a little late. Notable changes are: - More devices get moved out of board files into device tree descriptions. The remaining devices listed in there have patches that will get sent for 3.10, after which we can remove a lot of the board files entirely. We are doing the pinctrl and mmc drivers here, ethernet and PCI still remain. - SMP support for mvebu is improved with support for the local interrupt controller. - The Guruplug board file gets replaced with a DT description. Unfortunately, the dependency on the MMC tree turned out to be a much larger problem than expected, when the MMC maintainer rebased the patches in his tree that all of the patches in this branch are based on, which caused merge conflicts between the new and old versions of those patches. To work around the merge conflicts, this branch rebases all patches on top of the respective MMC patches that did get merged into 3.9. The patches are all identical to the versions that were part of linux-next, but have a new commit date." * tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits) arm: mvebu: enable the SD card slot on Armada 370 Reference Design board ARM: kirkwood: topkick: init mvsdio via DT ARM: kirkwood: nsa310: convert to pinctrl ARM: Kirkwood: topkick: Enable i2c bus. ARM: kirkwood: topkick: convert to pinctrl ARM: dove: convert serial DT nodes to clocks property arm: mvebu: Add SPI flash on Armada 370 DB board arm: mvebu: Add SPI flash on Armada XP-DB board arm: mvebu: Add SPI flash on Armada XP-GP board arm: mvebu: Add support for SPI controller in Armada 370/XP clocksource: update and move armada-370-xp-timer documentation to timer directory arm: mvebu: update DT to support local timers ARM: Dove: convert usb host controller to DT arm: mvebu: Enable USB controllers on Armada 370/XP boards arm: mvebu: Add support for USB host controllers in Armada 370/XP arm: mvebu: add button for OpenBlocks AX3-4 ARM: Kirkwood: Convert NS2 to gpio-poweroff. ARM: Kirkwood: Convert NSA310 I2C to device tree ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver ARM: Kirkwood: Convert NSA310 to DT based regulators. ...
2013-02-28ARM: Dove: convert usb host controller to DTSebastian Hesselbarth1-10/+0
With DT support for orion-ehci also convert Dove to it and remove the legacy calls and clock aliases. This patch is based on "ARM: Dove: split legacy and DT setup" applied to mvebu/boards recently. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>