summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-neuros-osd2.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-17Merge tag 'davinci-for-v3.10/board-2-v2' of ↵Olof Johansson1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards From Sekhar Nori: v3.10 board updates for DaVinci This set of patches enables remoteproc support on DA850 EVM and fixes some sparse warnings for the same board. * tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash1-1/+0
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-02ARM: davinci: use is IS_ENABLED macroLad, Prabhakar1-13/+2
This patches replaces #if defined() by IS_ENABLED macro, which provides better readability. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-24ARM: davinci: convert platform code to use clk_prepare/clk_unpreparem-karicheri2@ti.com1-1/+1
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann1-4/+4
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-08-10ARM: davinci: remove broken ntosd2_init_i2cArnd Bergmann1-39/+0
ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to be populated with at least one member. gcc correctly warns about the out-of-bounds access here. Since this can not possibly work, it's better to disable i2c support entirely on this board. Without this patch, building davinci_all_defconfig results in: arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init': arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Andrey Porodko <panda@chelcom.ru>
2012-05-05ARM: davinci: use machine specific hook for late initShawn Guo1-0/+1
Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com>
2012-02-27Merge branch 'davinci/cleanups' into next/cleanupArnd Bergmann1-1/+2
* davinci/cleanups: ARM: davinci: add back dummy header files ARM: davinci: dm644x: don't force vpfe registeration on all boards ARM: davinci: dm644x: fix inconsistent variable naming ARM: davinci: dm644x: improve readability using macro ARM: davinci: streamline sysmod access ARM: davinci: create new common platform header for davinci ARM: davinci: dm646x: move private definitions to C file ARM: davinci: dm365: move private definitions to C file ARM: davinci: dm644x: move private definitions to C file Conflicts: arch/arm/mach-davinci/board-dm644x-evm.c arch/arm/mach-davinci/board-neuros-osd2.c arch/arm/mach-davinci/board-sffsdr.c
2012-02-25ARM: davinci: create new common platform header for davinciManjunath Hadli1-1/+2
Remove individual platform header files for dm365, dm355, dm644x and dm646x and consolidate it into a single and common header file davinci.h placed in arch/arm/mach-davinci. This reduces the pollution in the include/mach and is consistent with Russell's suggestions as part of his "pet peaves" mail. (See #4 in: http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/071516.html) While at it, fix the forward declaration of spi_board_info, and include the right header file instead. The further patches in the series take advantage of this consolidation for easy implementation of IO_ADDRESS elimination. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> [nsekhar@ti.com: make davinci.h the first local include file, fix forward declaration of spi_board_info and add back Deep Root Systems, LLC copyright] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-27ARM: davinci: update mdio bus nameSekhar Nori1-1/+1
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-05ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori1-0/+1
Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-1/+1
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris1-1/+1
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris1-1/+1
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-08-21ARM: mach-davinci: convert boot_params to atag_offsetNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-18ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre1-0/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman1-5/+2
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre1-2/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-09-24davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy1-5/+2
This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy1-6/+1
This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06DaVinci: move IDE platform device to its proper placeSergei Shtylyov1-32/+2
The IDE platform device is registered in three different places (2 board files for DM644x and in dm646x.c for DM646x) while both the IDE base address and the IDE IRQ are the same for both SoCs -- therefore, the proper place for the IDE platform seems to be in devices.c. Merge the IDE platform data and registration code and create davinci_init_ide() in place of dm646x_init_ide()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06DaVinci: move AEMIF #define's to the proper headersSergei Shtylyov1-7/+4
Currently each DaVinci board file #define's its own version of the EMIFA base addresses (all named DAVINCI_ASYNC_EMIF_*_BASE), which leads to duplication. Move these #define's to the SoC specific headers, changing their prefixes from 'DAVINCI' to the 'DM355', 'DM644X', and 'DM646X' since all these base addresses are SoC specific... And while at it, rename DM646X_ASYNC_EMIF_DATA_CE0_BASE to DM646X_ASYNC_EMIF_CS2_SPACE_BASE in order to match the DM646x datasheet. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06davinci: misc cleanups from sparseKevin Hilman1-1/+1
- Convert data/functions to static - include headers for missing declarations - pointer cleanups: struct foo *__iomem f --> struct foo __iomem *f; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25davinci: Initial support for Neuros OSD2 platform.Andrey Porodko1-0/+323
The Neuros OSD 2.0 is the hardware component of the Neuros Open Internet Television Platform. Hardware is very close to Ti DM644X-EVM board. It has: DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. Additionaly realtime clock, IR remote control receiver, IR Blaster based on MSP430 (firmware although is different from used in DM644X-EVM), internal ATA-6 3.5” HDD drive with PATA interface, two muxed red-green leds. For more information please refer to http://wiki.neurostechnology.com/index.php/OSD_2.0_HD Signed-off-by: Andrey Porodko <panda@chelcom.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-18 06:03:09 +0000