summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-cns3xxx/cns3420vb.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-04ARM: cns3xxx: fix allmodconfig panic in pci driverXia Kaixu1-0/+1
The kernel panic occurs when running an allmodconfig kernel on OMAP4460. The inicall "cns3xxx_pcie_init" does not check which hardware it's running on and just tries to access to its specific registers. Now call it from .init_late callback from the two machine descriptors. Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linaro-kernel@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org
2014-03-17CNS3xxx: Fix a WARN() related to IRQ allocation.Krzysztof Hałasa1-1/+0
WARNING: at drivers/irqchip/irq-gic.c:952 gic_init_bases+0xe4/0x2b8() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated Backtrace: gic_init_bases from cns3xxx_init_irq+0x24/0x34 cns3xxx_init_irq from init_IRQ+0x24/0x2c init_IRQ from start_kernel+0x1a8/0x338 start_kernel from 0x2000806c The problem is that 64 CNS3xxx CPU interrupts, starting at 32, are allocated by the ARM platform-independent code (as requested by machine_desc->nr_irqs = 96), and then the GIC code tries to allocate them again. Tested on Gateworks Laguna board, masqueraded as CNS3420VB. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14ARM: cns3xxx: enable sparse IRQ supportArnd Bergmann1-0/+1
This trivially enables sparse IRQ on cns3xxx by moving the nr_irqs definition from mach/irqs.h into the machine descriptor. These interrupts will still get statically assigned, so nothing changes here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14ARM: cns3xxx: make mach header files localArnd Bergmann1-3/+2
The mach/cns3xxx.h and mach/pm.h header files are used only in the platform code itself, so there is no need to make them globally visible. This gets us closer to multiplatform configuration for cns3xxx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-01-14Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson1-2/+0
into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-12ARM: remove mach .handle_irq for GIC usersRob Herring1-2/+0
Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31USB: EHCI: remove ehci_port_power() routineAlan Stern1-1/+0
This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22ARM: cns3xxx: use OHCI platform driverFlorian Fainelli1-5/+13
This patch converts the cns3xxx platform to use the ohci-platform driver which is now suitable for use. A previous patch converted the cns3xxx platform to use the ehci-platform driver, and thus introduced the need to have power_{on,off} callbacks. Since both the EHCI and OHCI platform drivers use the same same power_{on,off} callbacks now, rename them to cns3xx_usb_power_{on,off} to show that they are shared. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22ARM: cns3xxx: use ehci platform driverFlorian Fainelli1-1/+43
This patch converts the cns3xxx platform to use the ehci-platform driver instead of the ehci-cns3xxx platform driver. The ehci-platform driver is provided with power_{on,off} callbacks to ensure proper block gating and USB configuration of the EHCI controller. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-05Merge branch 'restart' into for-linusRussell King1-0/+1
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: cns3xxx: use new restart hookRussell King1-0/+1
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-15ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier1-0/+2
Convert the cns3xxx platform to be using the gic_handle_irq function as its primary interrupt handler. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-08-21ARM: mach-cns3xxx: convert boot_params to atag_offsetNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds1-0/+2
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-12ARM: remove unnecessary mach/hardware.h includesRob Herring1-1/+0
Remove some includes of mach/hardware.h which are not needed. hardware.h will be removed completely for tegra and cns3xxx in follow on patch. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07ARM: cns3xxx: Add support for L2 Cache ControllerAnton Vorontsov1-0/+2
CNS3xxx SOCs have L310-compatible cache controller, so let's use it. With this patch benchmarking with 'gzip' shows that performance is doubled, and I'm still able to boot full-fledged userland over NFS (using PCIe NIC), so the support should be pretty robust. p.s. While CNS3xxx reports that it has PL310, it still needs to wait on cache line operations, so we should not select 'CACHE_PL310', which is a micro-optimization that removes these waits for v7 CPUs. Someday we'd better rename CACHE_PL310 Kconfig option into NO_CACHE_WAIT or something less ambiguous. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-11-26ARM: cns3xxx: Add architecture definition for EHCI/OHCI controllerMac Lin1-0/+54
This patch add plateform_device for EHCI and OHCI controller on CNS3XXX. Power reference count (usb_pwr_ref) is used to control enabling and disabling the single clock control for both EHCI and OHCI controller. It also removes EHCI/OHCI unused virtual address definitions. Signed-off-by: Mac Lin <mkl0301@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre1-2/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-06-08ARM: cns3xxx: Add support for AHCI controllersAnton Vorontsov1-0/+1
CNS3xxx chips have AHCI-compatible SATA controller. This patch adds the support using generic ahci_platform driver. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-06-08ARM: cns3xxx: Add support for SDHCI controllersAnton Vorontsov1-0/+3
CNS3xxx chips have SDHCI-compatible SDIO/SD/MMC controller. This patch adds the support using sdhci-cns3xxx driver. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-05-02ARM: cns3xxx: Add CNS3420 Validation Board supportAnton Vorontsov1-0/+148
This patch adds support for CNS3420VB rev 1.3 boards. With this patch CNS3420VB boards are able to boot up to the userspace, with a console available on UART0. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-02 16:23:41 +0000