summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-5/+5
Pull ARM updates from Russell King: - replace setup_irq() with request_irq() for ebsa110, footbridge, rpc - fix clang assembly error in kexec code - remove .fixup section in boot stub - decompressor / EFI cache flushing updates * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8966/1: rpc: replace setup_irq() by request_irq() ARM: 8965/2: footbridge: replace setup_irq() by request_irq() ARM: 8964/1: ebsa110: replace setup_irq() by request_irq() ARM: 8962/1: kexec: drop invalid assembly argument ARM: decompressor: switch to by-VA cache maintenance for v7 cores ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance ARM: decompressor: factor out routine to obtain the inflated image size ARM: 8959/1: Remove unused .fixup section in boot stub ARM: allow unwinder to unwind recursive functions
2020-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-68/+8
Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...
2020-03-30Merge tag 'smp-core-2020-03-30' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
2020-03-25ARM: Use reboot_cpu instead of hardcoding it to 0Qais Yousef1-1/+1
Use `reboot_cpu` variable instead of hardcoding 0 as the reboot cpu in machine_shutdown(). Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@armlinux.org.uk> Link: https://lkml.kernel.org/r/20200323135110.30522-6-qais.yousef@arm.com
2020-03-25ARM: Don't use disable_nonboot_cpus()Qais Yousef1-2/+2
disable_nonboot_cpus() is not safe to use when doing machine_down(), because it relies on freeze_secondary_cpus() which in turn is a suspend/resume related freeze and could abort if the logic detects any pending activities that can prevent finishing the offlining process. Beside disable_nonboot_cpus() is dependent on CONFIG_PM_SLEEP_SMP which is an othogonal config to rely on to ensure this function works correctly. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@armlinux.org.uk> Link: https://lkml.kernel.org/r/20200323135110.30522-5-qais.yousef@arm.com
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24arm: Remove the ability to set HYP vectors outside of the decompressorMarc Zyngier1-31/+8
Although we have to bounce between HYP and SVC to decompress and relocate the kernel, we don't need to be able to use it in the kernel itself. So let's drop the functionnality. Since the vectors are never changed, there is no need to reset them either, and nobody calls that stub anyway. The last function (SOFT_RESTART) is still present in order to support kexec. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-03-24arm: Remove HYP/Stage-2 page-table supportMarc Zyngier3-26/+0
Remove all traces of Stage-2 and HYP page table support. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
2020-03-24arm: Remove 32bit KVM host supportMarc Zyngier1-11/+0
That's it. Remove all references to KVM itself, and document that although it is no more, the ABI between SVC and HYP still exists. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@arm.com>
2020-03-16Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+2
Pull ARM fixes from Russell King: - allow use of ARMv8 arch timer in 32-bit VDSO - rename missed .fixup section - fix kbuild issue with stack protector GCC plugin * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin ARM: 8958/1: rename missed uaccess .fixup section ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()
2020-03-12ARM: 8962/1: kexec: drop invalid assembly argumentStefan Agner1-4/+4
The tst menomic has only a single #<const> argument in Thumb mode. There is an ARM variant which allows to write #<const> as #<byte>, #<rot> which probably is where the current syntax comes from. It seems that binutils does not care about the additional parameter. Clang however complains in Thumb2 mode: arch/arm/kernel/relocate_kernel.S:28:12: error: too many operands for instruction tst r3,#1,0 ^ Drop the unnecessary parameter. This fixes building this file in Thumb2 mode with the Clang integrated assembler. Link: https://github.com/ClangBuiltLinux/linux/issues/770 Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-02-21ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()Florian Fainelli1-0/+2
It is possible for a system with an ARMv8 timer to run a 32-bit kernel. When this happens we will unconditionally have the vDSO code remove the __vdso_gettimeofday and __vdso_clock_gettime symbols because cntvct_functional() returns false since it does not match that compatibility string. Fixes: ecf99a439105 ("ARM: 8331/1: VDSO initialization, mapping, and synchronization") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-02-21ARM: allow unwinder to unwind recursive functionsRussell King1-1/+1
Allow the unwinder to unwind recursive functions if the stack makes progress, even if the PC is the same. This allows tracing through recursive __switchdev_handle_port_attr_set() and similar. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-02-11arm/patch: Fix !MMU compilePeter Zijlstra1-10/+9
Now that patch.o is unconditionally selected for ftrace, it can also get compiled for !MMU kernels. These (obviously) lack {set,clear}_fixmap() support. Also remove the superfluous __acquire/__release nonsense. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-11arm/ftrace: Fix BE text pokingPeter Zijlstra1-5/+2
The __patch_text() function already applies __opcode_to_mem_*(), so when __opcode_to_mem_*() is not the identity (BE*), it is applied twice, wrecking the instruction. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-2/+6
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-4/+4
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-28Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2-10/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Ftrace is one of the last W^X violators (after this only KLP is left). These patches move it over to the generic text_poke() interface and thereby get rid of this oddity. This requires a surprising amount of surgery, by Peter Zijlstra. - x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to count certain types of events that have a special, quirky hw ABI (by Kim Phillips) - kprobes fixes by Masami Hiramatsu Lots of tooling updates as well, the following subcommands were updated: annotate/report/top, c2c, clang, record, report/top TUI, sched timehist, tests; plus updates were done to the gtk ui, libperf, headers and the parser" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) perf/x86/amd: Add support for Large Increment per Cycle Events perf/x86/amd: Constrain Large Increment per Cycle events perf/x86/intel/rapl: Add Comet Lake support tracing: Initialize ret in syscall_enter_define_fields() perf header: Use last modification time for timestamp perf c2c: Fix return type for histogram sorting comparision functions perf beauty sockaddr: Fix augmented syscall format warning perf/ui/gtk: Fix gtk2 build perf ui gtk: Add missing zalloc object perf tools: Use %define api.pure full instead of %pure-parser libperf: Setup initial evlist::all_cpus value perf report: Fix no libunwind compiled warning break s390 issue perf tools: Support --prefix/--prefix-strip perf report: Clarify in help that --children is default tools build: Fix test-clang.cpp with Clang 8+ perf clang: Fix build with Clang 9 kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic tools lib: Fix builds when glibc contains strlcpy() perf report/top: Make 'e' visible in the help and make it toggle showing callchains perf report/top: Do not offer annotation for symbols without samples ...
2020-01-25Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-4/+3
Pull ARM fixes from Russell King: - fix ftrace relocation type filtering - relax arch timer version check * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8955/1: virt: Relax arch timer version check during early boot ARM: 8950/1: ftrace/recordmcount: filter relocation types
2020-01-25ARM: 8948/1: Prevent OOB access in stacktraceVincent Whitchurch2-2/+6
The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-22ARM: 8955/1: virt: Relax arch timer version check during early bootVladimir Murzin1-4/+3
Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to have values other than 0 or 1 while still preserving backward compatibility. At the moment, Linux is quite strict in the way it handles this field at early boot and will not configure arch timer if it doesn't find the value 1. Since here use ubfx for arch timer version extraction (hyb-stub build with -march=armv7-a, so it is safe) To help backports (even though the code was correct at the time of writing) Fixes: 8ec58be9f3ff ("ARM: virt: arch_timers: enable access to physical timers") Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-20Merge tag 'v5.5-rc7' into perf/core, to pick up fixesIngo Molnar1-3/+3
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-14arch/arm/setup: Drop dummy_con initializationArvind Sankar1-2/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-6-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-07arm: Implement copy_thread_tlsAmanieu d'Antras1-3/+3
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-4-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar2-5/+9
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflictsIngo Molnar14-100/+37
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08sched/rt, ARM: Use CONFIG_PREEMPTIONThomas Gleixner2-2/+4
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code, cache over to use CONFIG_PREEMPTION and add output in show_stack() for PREEMPT_RT. [bigeasy: +traps.c] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20191015191821.11479-2-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-5/+9
Pull ARM fixes from Russell King: - fix CPU topology setup for SCHED_MC case - fix VDSO regression * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
2019-12-06ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MCDietmar Eggemann2-5/+9
Commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") changed cpu_coregroup_mask() from the ARM32 specific implementation in arch/arm/include/asm/topology.h to the one shared with ARM64 and RISCV in drivers/base/arch_topology.c. Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug: ERROR: groups don't span domain->span It happens to CPUs of the cluster of the CPU which gets hot-plugged out on scheduler domain MC. Turns out that the shared cpu_coregroup_mask() requires that the hot-plugged CPU is removed from the core_sibling mask via remove_cpu_topology(). Otherwise the 'is core_sibling subset of cpumask_of_node()' doesn't work. In this case the task scheduler has to deal with cpumask_of_node instead of core_sibling which is wrong on scheduler domain MC. e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4 ^ should be: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4 Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the topology masks in case of a CPU hotplug out operation. At the same time tweak store_cpu_topology() slightly so it will call update_siblings_masks() in case of CPU hotplug in operation via secondary_start_kernel()->smp_store_cpu_info(). This aligns the ARM32 implementation with the ARM64 one. Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is necessary since some Arm32 defconfigs (aspeed_g5_defconfig, milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit # CONFIG_ARM_CPU_TOPOLOGY is not set w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-30Merge tag 'seccomp-v5.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "Mostly this is implementing the new flag SECCOMP_USER_NOTIF_FLAG_CONTINUE, but there are cleanups as well. - implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner) - fixes to selftests (Christian Brauner) - remove secure_computing() argument (Christian Brauner)" * tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test seccomp: simplify secure_computing() seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: avoid overflow in implicit constant conversion
2019-11-30Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds12-94/+27
Pull ARM updates from Russell King: - improve ARM implementation of pfn_valid() - various sparse fixes - spelling fixes - add further ARMv8 debug architecture versions - clang fix for decompressor - update to generic vDSO - remove Brahma-B53 from spectre hardening - initialise broadcast hrtimer device - use correct nm executable in decompressor - remove old mcount et.al. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (26 commits) ARM: 8940/1: ftrace: remove mcount(),ftrace_caller_old() and ftrace_call_old() ARM: 8939/1: kbuild: use correct nm executable ARM: 8938/1: kernel: initialize broadcast hrtimer based clock event device ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening ARM: 8933/1: replace Sun/Solaris style flag on section directive ARM: 8932/1: Add clock_gettime64 entry point ARM: 8931/1: Add clock_getres entry point ARM: 8930/1: Add support for generic vDSO ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand ARM: 8927/1: ARM/hw_breakpoint: add more ARMv8 debug architecture versions support ARM: 8918/2: only build return_address() if needed ARM: 8928/1: ARM_ERRATA_775420: Spelling s/date/data/ ARM: 8925/1: tcm: include <asm/tcm.h> for missing declarations ARM: 8924/1: tcm: make dtcm_end and itcm_end static ARM: 8923/1: mm: include <asm/vga.h> for vga_base ARM: 8922/1: parse_dt_topology() rate is pointer to __be32 ARM: 8920/1: share get_signal_page from signal.c to process.c ARM: 8919/1: make unexported functions static ARM: 8917/1: mm: include <asm/set_memory.h> ARM: 8916/1: mm: make set_section_perms() static ...
2019-11-27arm/ftrace: Use __patch_text()Peter Zijlstra2-10/+4
Instead of flipping text protection, use the patch_text infrastructure that uses a fixmap alias where required. This removes the last user of set_all_modules_text_*(). Tested-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: ard.biesheuvel@linaro.org Cc: james.morse@arm.com Cc: rabin@rab.in Link: https://lkml.kernel.org/r/20191113092636.GG4131@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-26Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...
2019-11-16ARM: 8938/1: kernel: initialize broadcast hrtimer based clock event deviceBenjamin Gaignard1-0/+2
On platforms implementing CPU power management, the CPUidle subsystem can allow CPUs to enter idle states where local timers logic is lost on power down. To keep the software timers functional the kernel relies on an always-on broadcast timer to be present in the platform to relay the interrupt signalling the timer expiries. For platforms implementing CPU core gating that do not implement an always-on HW timer or implement it in a broken way, this patch adds code to initialize the kernel hrtimer based clock event device upon boot (which can be chosen as tick broadcast device by the kernel). It relies on a dynamically chosen CPU to be always powered-up. This CPU then relays the timer interrupt to CPUs in deep-idle states through its HW local timer device. Having a CPU always-on has implications on power management platform capabilities and makes CPUidle suboptimal, since at least a CPU is kept always in a shallow idle state by the kernel to relay timer interrupts, but at least leaves the kernel with a functional system with some working power management capabilities. The hrtimer based clock event device is unconditionally registered, but has the lowest possible rating such that any broadcast-capable HW clock event device present will be chosen in preference as the tick broadcast device. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-15ARM: 8930/1: Add support for generic vDSOVincenzo Frascino1-83/+4
The arm vDSO library requires some adaptations to take advantage of the newly introduced generic vDSO library. Introduce the following changes: - Modification vdso.c to be compliant with the common vdso datapage - Use of lib/vdso for gettimeofday - Implementation of elf note Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-15ARM: 8927/1: ARM/hw_breakpoint: add more ARMv8 debug architecture versions ↵Candle Sun1-0/+3
support When ARMv8 cores are used in AArch32 mode, arch_hw_breakpoint_init() in arch/arm/kernel/hw_breakpoint.c will be used. From ARMv8 specification, v8 debug architecture versions defined: * 0110 ARMv8, v8 Debug architecture. * 0111 ARMv8.1, v8 Debug architecture, with Virtualization Host Extensions. * 1000 ARMv8.2, v8.2 Debug architecture. * 1001 ARMv8.4, v8.4 Debug architecture. So missing ARMv8.1/ARMv8.2/ARMv8.4 cases will cause enable_monitor_mode() returns -ENODEV,and eventually arch_hw_breakpoint_init() will fail. Signed-off-by: Candle Sun <candle.sun@unisoc.com> Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-15ARM: 8918/2: only build return_address() if neededBen Dooks2-5/+5
The system currently warns if the config conditions for building return_address in arch/arm/kernel/return_address.c are not met, leaving just an EXPORT_SYMBOL_GPL(return_address) of a function defined to be 'static linline'. This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h"). Since we're not going to build anything other than an exported symbol for something that is already being defined to be an inline-able return of NULL, just avoid building the code to remove the following warning: Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h") Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-04vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATAKees Cook2-2/+2
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-14-keescook@chromium.org
2019-11-04vmlinux.lds.h: Move NOTES into RO_DATAKees Cook2-4/+0
The .notes section should be non-executable read-only data. As such, move it to the RO_DATA macro instead of being per-architecture defined. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # s390 Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-11-keescook@chromium.org
2019-10-31ARM: 8925/1: tcm: include <asm/tcm.h> for missing declarationsBen Dooks1-0/+1
The arch/arm/kernel/tcm.c should include <asm/tcm.h> for declarations of tcm_alloc, tcm_free and other functions. Fixes the following sparse warnings: arch/arm/kernel/tcm.c:74:6: warning: symbol 'tcm_alloc' was not declared. Should it be static? arch/arm/kernel/tcm.c:92:6: warning: symbol 'tcm_free' was not declared. Should it be static? arch/arm/kernel/tcm.c:98:6: warning: symbol 'tcm_dtcm_present' was not declared. Should it be static? arch/arm/kernel/tcm.c:104:6: warning: symbol 'tcm_itcm_present' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-31ARM: 8924/1: tcm: make dtcm_end and itcm_end staticBen Dooks1-2/+2
The dtcm_end and itcm_end are not exported or used elsewhere, so make them static to remove the following sparse warnign: arch/arm/kernel/tcm.c:33:5: warning: symbol 'dtcm_end' was not declared. Should it be static? arch/arm/kernel/tcm.c:34:5: warning: symbol 'itcm_end' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-31ARM: 8922/1: parse_dt_topology() rate is pointer to __be32Ben Dooks (Codethink)1-1/+1
The rate pointer in parse_dt_topology is a pointer to a __be32, not a u32. This fixes the following sparse warning: arch/arm/kernel/topology.c:128:43: warning: incorrect type in argument 1 (different base types) arch/arm/kernel/topology.c:128:43: expected restricted __be32 const [usertype] *p arch/arm/kernel/topology.c:128:43: got unsigned int const [usertype] *[assigned] rate Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-31ARM: 8920/1: share get_signal_page from signal.c to process.cBen Dooks (Codethink)2-0/+4
The get_signal_page() function is defined in signal.c and used in process.c but there is no shared definition. Add one in signal.h to silence the following warning: arch/arm/kernel/signal.c:683:13: warning: symbol 'get_signal_page' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-31ARM: 8919/1: make unexported functions staticBen Dooks (Codethink)1-3/+3
The psci_cpu_{disable,die,kill} functions are not exported, so make them static to avoid the following warnings: arch/arm/kernel/psci_smp.c:54:5: warning: symbol 'psci_cpu_disable' was not declared. Should it be static? arch/arm/kernel/psci_smp.c:67:6: warning: symbol 'psci_cpu_die' was not declared. Should it be static? arch/arm/kernel/psci_smp.c:79:5: warning: symbol 'psci_cpu_kill' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-27ARM: 8913/1: arch_timer: include <asm/arch_timer.h>Ben Dooks1-0/+1
The arch_timer_arch_init is defined in <asm/arch_timer.h> so include that to fix the following sparse error: arch/arm/kernel/arch_timer.c:31:12: warning: symbol 'arch_timer_arch_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-27ARM: 8910/1: fix missing declartion of module_frob_arch_sectionsBen Dooks1-0/+1
The module_frob_arch_sections function is missing the header declaration which is in <linux/moduleloader.h> so include that to fix the following sparse warning: arch/arm/kernel/module-plts.c:188:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-2/+5
:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 12:06:15 +0000