| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual updates to arm/arm64 defconfig files, enabling
newly added drivers and addressing changes to Kconfig files"
* tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: enable Qualcomm IPA and RMNet modules
arm64: defconfig: Add LEDS_TRIGGER_TIMER
arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs
arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc
arm64: defconfig: Remove QCOM_GLINK_SSR
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
arm64: defconfig: enable meson gx audio as module
arm64: defconfig: Enable SM8250 GCC driver
ARM: defconfig: u8500: Enable new drivers for ux500
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
arm64: configs: Enable sun50i cpufreq nvmem
ARM: shmobile: defconfig: Refresh for v5.7-rc1
ARM: defconfig: u8500: Enable new drivers for samsung-golden
ARM: configs: sunxi: Add sun8i analog codec
arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers
ARM: configs: at91: sama5: enable MCP16502 regulator
ARM: configs: at91: sama5: enable SAMA5D2_PIOBU
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
|
|
Rename the Kconfig variable to clarify the scope.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-11-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As these boards have no more users nor testers, and patching them has
become a burden, be that because of the PCI part or the MTD NAND
support, let's remove them.
The cm-x300 will for now remain and represent Compulab boards at its
best in the PXA department.
Link: https://lore.kernel.org/r/20200521185140.27276-1-robert.jarzmik@free.fr
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.8
- Add PIOBU and MCP16502 regulator to sama5 defconfig
* tag 'at91-5.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: sama5: enable MCP16502 regulator
ARM: configs: at91: sama5: enable SAMA5D2_PIOBU
Link: https://lore.kernel.org/r/20200518213254.GA26598@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8 (take two)
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
* tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
Link: https://lore.kernel.org/r/20200515100547.14671-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.8
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
* tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers
Link: https://lore.kernel.org/r/20200512122922.5700-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
* tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable fixed-regulator
Link: https://lore.kernel.org/r/20200511210522.28243-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8
- Refresh shmobile_defconfig for v5.7-rc1.
* tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.7-rc1
Link: https://lore.kernel.org/r/20200430084849.1457-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/defconfig
Ux500 defconfig changes for functionality merged in the
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
* tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: defconfig: u8500: Enable new drivers for ux500
ARM: defconfig: u8500: Enable new drivers for samsung-golden
Link: https://lore.kernel.org/r/CACRpkdaxT8dc=mhAd51+KtQ0K4Uj5tttt36bYJLqP_hNfWXP8w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are new drivers for functionality of that family
(RTC and ADC), so enable them, since they are used by
various i.MX6 boards.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable recently added r8a7742 (RZ/G1H) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1588197415-13747-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable recently added r8a7742 (RZ/G1H) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1588197415-13747-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The new device tree for samsung-skomer and the HREF520
devicetree enables some additional drivers that are not yet
selected in the u8500_defconfig:
- The GPIO-based I2C bus master driver for some peripherals
that do not use the I2C hardware master.
- The Novatek NT35510 driver for the Skomer panel.
- The Sony ACX424AKP driver for the HREF520 panel.
- The GPIO-based backlight driver for Skomer.
- The BMA180 driver for the BMA254 accelerometer found in the
Skomer.
- The new GP2AP002 driver for the GP2AP002S00F proximimty sensor
found in the Skomer and Golden devices.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the defconfig for Renesas ARM boards:
- Enable CONFIG_DRM_DISPLAY_CONNECTOR (for HDMI, VGA, and composite
display connectors on various R-Car H1, Gen2, and RZ/G1 boards,
since commit 0c275c30176b2e78 ("drm/bridge: Add bridge driver for
display connectors")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200415124923.2510-1-geert+renesas@glider.be
|
|
Most CEC platform drivers are using VIDEO_*_CEC pattern, some with
an _HDMI extension too.
Well, they're not related to V4L2 support, and we don't really
need those big config names. So drop VIDEO_* from them, remove
_HDMI (if present) and move CEC to the start.
This way, all platform driver options are now CEC_<driver>.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The new device tree for samsung-golden depends on some additional
drivers that are not selected in the u8500 defconfig yet:
- Bluetooth: hci_bcm
- WiFi: brcmfmac
- Touchscreen: atmel_mxt_ts
- Vibrator: gpio-vibra
- Sensors: inv_mpu6050 (IMU)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On my orange pi PC, I got lot of "sun4i-codec 1c22c00.codec: Failed to register our card".
This was due to a missing component: the sun8i analog codec.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Enables fixed regulator in bcm2835_defconfig
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Driver is built as a module.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Link: https://lore.kernel.org/r/20200325102223.24827-2-eugen.hristev@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Driver is enabled as a module.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Link: https://lore.kernel.org/r/20200325102223.24827-1-eugen.hristev@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
MAC80211/CFG80211 framework requires loading regulatory.db from
/lib/firmware directory, so it makes very little sense to have it
built-in. Change it to be built as modules to let it properly load the
needed firmware/db files. As a side effect of this change, the size of
the compressed modules on SquashFS increased significantly from 27MiB
to 38MiB, so increase the size of BLK_DEV_RAM to allow the modules to
fit into it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Enable serial bus and BCM HCIUART Bluetooth drivers available on the
Exynos3250-based Rinato board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"As usual, tons of new drivers and other options got merged and are now
enabled in the defconfig files, usually as loadable modules"
* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
|
|
This regulator is now used to control the SD card's power supply on the
Raspberry Pi 4.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200326134458.13992-1-nsaenzjulienne@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
PM changes for am335x and am437x for v5.7 merge window
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
* tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE
soc: ti: pm33xx: Add base cpuidle support
ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/config
AT91 defconfig for 5.7
- Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60
* tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable sama5d4 compatible watchdog
Link: https://lore.kernel.org/r/20200322085711.GA208700@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/config
Defconfig changes for omaps for v5.7 merge window
We want to enable some more features for omap2plus_defconfig to make it
more usable:
- Enable scururity for ext4 so setcap works
- Enable simple-pm-bus so it can be later on be configured in the dts
files as needed
- Enable zram as loadable modules as we do have devices using it
- Enable more devices for droid4 for 1-wire battery eeprom and isl29028
proximity sensor
- Enable mcpdm clocks from the PMIC as loadable modules
- Enable ina2xx_adc as loadable module
- And finally let's also omap2plus_deconfig for moved and dropped options
* tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
ARM: omap2plus_defconfig: Enable ext4 security for setcap
Link: https://lore.kernel.org/r/pull-1584575344-983293@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM defconfig updates for v5.7
Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig,
for usage on the 8974 devices.
* tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: Enable QRTR
ARM: qcom_defconfig: add Broadcom bluetooth options
Link: https://lore.kernel.org/r/20200318043931.GC470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/config
Samsung defconfig changes for v5.7
1. Enable Energy Model and Multi-core scheduler because they fit common
use of Exynos SoCs - mobile devices,
2. Enable more drivers for GalaxyS3/Trats2.
* tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2
ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL
ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size
Link: https://lore.kernel.org/r/20200316175652.5604-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/config
ARM: tegra: Default configuration changes for v5.7-rc1
These patches enable the new, unified CPU idle driver for Tegra20,
Tegra30 and Tegra114.
* tag 'tegra-for-5.7-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable Tegra cpuidle driver in tegra_defconfig
ARM: multi_v7_defconfig: Enable Tegra cpuidle driver
Link: https://lore.kernel.org/r/20200313165848.2915133-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/config
This pull request contains Broadcom ARM-based SoCs defconfig changes for
v5.7, please pull the following:
- Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and
GPIO regulator support in bcm2835_defconfig
* tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: add support for Raspberry Pi4
Link: https://lore.kernel.org/r/20200311212012.9418-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Only one platform is building KVM by default. How crazy! Remove
it whilst nobody is watching.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
Looks like CONFIG_MTD_M25P80 no longer exists and the others just
move around the existing options. This makes it easier to create
patches against omap2plus_defconfig.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Some devices have ina2xx_adc on i2c for measuring power consumption
and can nowadays just read the output via IIO.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The McPDM module is only usable on hardware where it's module clock
is wired to the PMIC. Let's enable the optional PMIC module clocks
for this so boards can use McPDM.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Enable more droid4 devices as loadable modules:
- We have an isl29028 proximity sensor
- Battery has an EEPROM that can be read with w1_ds250x
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Enable zram as loadable modules. This allows mounting some part of
memory as swap on low memory devices.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can use simple-pm-bus instead of simple-bus, let's enable it to allow
configuring it in dts files for using things like genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and
it is now a proper platform driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and
it is now a proper platform driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
