summaryrefslogtreecommitdiffstats
path: root/arch/arm/configs/mvebu_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12ARM: mvebu: config: Enable NAND supportEzequiel Garcia1-0/+2
Enable the pxa3xx-nand driver, which now supports the NAND controller in Armada 370/XP SoC. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-23ARM: mvebu: config: Add GPIO connected LEDs support to defconfigEzequiel Garcia1-0/+1
Almost every mvebu board has at least one LED connected to a GPIO line. Include this in the default configuration. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-03ARM: mvebu: add gpio-keys and input event support in defconfigThomas Petazzoni1-0/+2
Some Armada 370/XP boards have GPIO buttons, so it makes sense to enable gpio-keys and the input event interface in mvebu_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-14Merge tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux into ↵Olof Johansson1-2/+0
next/soc mvebu register map changes for v3.11 This series removes the hardcoded register base address for mvebu. Depends: - mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1) - mvebu/cleanup (up to tags/cleanup-3.11-3) * tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux: arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfig arm: mvebu: add another earlyprintk Kconfig option arm: mvebu: don't hardcode the physical address for mvebu-mbus arm: mvebu: don't hardcode a physical address in headsmp.S arm: mvebu: remove hardcoded static I/O mapping arm: mvebu: move cache and mvebu-mbus initialization later arm: mvebu: avoid hardcoded virtual address in coherency code arm: mvebu: remove dependency of SMP init on static I/O mapping arm: mvebu: fix length of Ethernet registers area in .dtsi arm: mvebu: fix length of SATA registers area in .dtsi arm: mvebu: mark functions of armada-370-xp.c as static ARM: mvebu: Remove init_irq declaration in machine description ARM: Orion: Remove redundant init_dma_coherent_pool_size() Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-13arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfigThomas Petazzoni1-2/+0
Now that we have two different addresses for the UART, depending on which bootloader is used, it is no longer desirable to enable earlyprintk by default in the defconfig. Users who need earlyprintk support will have to enable it explicitly, and select the right UART configuration depending on their platform. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-19arm: mvebu: update defconfig with PCI and USB supportThomas Petazzoni1-0/+3
Now that we have the necessary drivers and Device Tree informations to support PCIe on Armada 370 and Armada XP, enable the CONFIG_PCI option. Also, since the Armada 370 Mirabox has a built-in USB XHCI controller connected on the PCIe bus, enable the corresponding options as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-13ARM: mvebu: Add support for USB storage class in mvebu_defconfigEzequiel Garcia1-0/+1
Some boards can have built-in USB storage class controllers so it's better to have this option included by default. Currently this option is needed to support built-in USB MMC controller found in Globalscale Mirabox board. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-11ARM: mvebu: Add Device Bus and CFI flash memory support to defconfigEzequiel Garcia1-0/+7
This patch selects the devbus driver as part of the mvebu default config, along with the required options to detect and support CFI flash memories. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-03ARM: configs: Update mvebu defconfig for thermalEzequiel Garcia1-0/+2
The thermal management driver for Armada XP/370 has been added so we update the defconfig to reflect this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: update defconfig with ATAG support when using DTGregory CLEMENT1-0/+1
Some of the mvebu boards (mainly the development board) come with plug-in RAM modules. This patch allows to let the bootloaders which have no support for DTS to give the real amount of memory available on the board. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: mvebu: Update defconfig to select SPI flash and MTD supportEzequiel Garcia1-0/+3
The Armada XP DB-MV784MP-GP board has an SPI flash device. These options allow to access that device over MTD. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: mvebu: Update defconfig to select SPI supportEzequiel Garcia1-0/+2
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: update defconfig with local timer supportGregory CLEMENT1-1/+0
Now that we have support for local timers, enable it by default Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Update defconfig to select USB supportEzequiel Garcia1-1/+4
Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: add LEDs support to defconfig fileThomas Petazzoni1-0/+5
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to enable LED support in mvebu_defconfig. We anticipate that more platforms using Marvell EBU SoCs will have LEDs in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: enable btmrvl driver in mvebu_defconfigThomas Petazzoni1-0/+3
The Globalscale Mirabox platform, based on the Armada 370 from Marvell, has a SD8787 Wireless/Bluetooth chip connected on the SDIO interface. Now that the mvsdio has a Device Tree binding, and the necessary Device Tree informations have been added at the SoC and board level, let's enable the btmrvl driver for the Bluetooth part of the SD8787 chip. For now, the driver gets probed correctly, detects the device but apparently fails to push the firmware to the device: Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Bluetooth: FW failed to be active in time! Bluetooth: Downloading firmware failed! Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3 Bluetooth: FW failed to be active in time! Bluetooth: Downloading firmware failed! This will have to be investigated separately. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: enable mwifiex driver in mvebu_defconfigThomas Petazzoni1-0/+3
The Globalscale Mirabox platform, based on the Armada 370 from Marvell, has a SD8787 Wireless chip connected on the SDIO interface. Now that the mvsdio has a Device Tree binding, and the necessary Device Tree informations have been added at the SoC and board level, let's enable the mwifiex driver for the Wireless part of the SD8787 chip. For now, the driver gets probed correctly, detects a device and shows the network interfaces. However, scanning Wifi networks doesn't work for now, with a 'CMD_RESP: cmd 0x6 error, result=0x1' message. This will have to be investigated separately. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: enable SDIO support in mvebu_defconfigThomas Petazzoni1-0/+2
Now that the mvsdio driver has gained Device Tree support and the necessary Device Tree informations has been added for Armada 370 and Armada XP platforms, we enable the MMC subsystem and the mvsdio driver in mvebu_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Update defconfig with Marvell RTC supportGregory CLEMENT1-0/+1
The RTC class driver is already part of the mvebu_defconfig but the Marvell internal RTC not yet. Now that its support is added for mvebu let's update the config file. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Florian Fainelli <florian@openwrt.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23arm: mvebu: i2c come back in defconfigGregory CLEMENT1-0/+2
When the patch "arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver" was applied to a git tree and became the commit b24212fbfba25 it wrongly removed the i2c support. This patch reintroduce it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT1-3/+1
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-22Merge tag 'marvell-openblocks-i2c-sata-for-3.8' of ↵Jason Cooper1-0/+4
git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything Marvell SATA and I2C enabling for OpenBlocks AX3-4
2012-11-21ARM: mvebu: update defconfig with I2C and RTC supportThomas Petazzoni1-0/+4
Now that we have support for the I2C busses on Armada 370/XP, and support for the RTC on the OpenBlocks AX3-4 platform, include the necessary options in mvebu_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21Merge tag 'marvell-armadaxp-smp-for-3.8' of ↵Jason Cooper1-0/+3
git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything SMP support for Armada XP The purpose of this series is to add the SMP support for the Armada XP SoCs. Beside the SMP support itself brought by the last 3 commits, this series also adds the support for the coherency fabric unit and the power management service unit. The coherency fabric is responsible for ensuring hardware coherency between all CPUs and between CPUs and I/O masters. This unit is also available for Armada 370 and will be used in an incoming patch set for hardware I/O cache coherency. The power management service unit is responsible for powering down and waking up CPUs and other SOC units.
2012-11-21Merge tag 'marvell-net-xor-defconfig-for-3.8' of ↵Jason Cooper1-0/+7
git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything Marvell mvebu defconfig updates for 3.8 Conflicts: arch/arm/configs/mvebu_defconfig
2012-11-21arm: mvebu: Add SMP support for Armada XPGregory CLEMENT1-0/+3
This enables SMP support on the Armada XP processor. It adds the mandatory functions to support SMP such as: the SMP initialization functions in platsmp.c, the secondary CPU entry point in headsmp.S and the CPU hotplug initial support in hotplug.c. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-11-20Merge tag 'marvell-net-xor-defconfig-for-3.8' of ↵Thomas Petazzoni1-0/+7
github.com:MISL-EBU-System-SW/mainline-public into test-the-merge Marvell mvebu defconfig updates for 3.8 Conflicts: arch/arm/configs/mvebu_defconfig Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20arm: mvebu: update defconfig to include XOR driverThomas Petazzoni1-0/+2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20arm: mvebu: update defconfig to include network driverThomas Petazzoni1-0/+5
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20arm: mvebu: SATA support: mvebu_defconfig updateGregory CLEMENT1-0/+3
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-10-27ARM: mvebu: update defconfig with 3.7 changesThomas Petazzoni1-3/+7
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-22arm: mvebu: add gpio support in defconfigThomas Petazzoni1-0/+2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-07-10arm: mach-mvebu: add defconfigThomas Petazzoni1-0/+46
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Yehuda Yitschak <yehuday@marvell.com> Tested-by: Lior Amsalem <alior@marvell.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 16:31:11 +0000