summaryrefslogtreecommitdiffstats
path: root/arch/arm/common
AgeCommit message (Collapse)AuthorFilesLines
2011-11-26ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculationWill Deacon1-5/+8
Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7176/1: cpu_pm: register GIC PM notifier only onceMarc Zyngier1-1/+2
When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Colin Cross <ccross@android.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-21ARM: 7165/2: PL330: Fix typo in _prepare_ccr()Javi Merino1-2/+2
scctl should be shifted by CC_SRCCTRL_SHFT and dcctl by CC_DSTCCTRL_SHFT, not the other way round. Reference: <1320244259-10496-4-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-21ARM: 7163/2: PL330: Only register usable channelsJavi Merino1-1/+7
When the manager is running non-secure, the only channels that can issue interrupts are the ones that have a 1 in their corresponding bit in Configuration Register 3. The other ones will generate an abort when trying to signal the end of the transaction so they are useless in non-secure mode. Reference: <1320244259-10496-2-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-01Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2-63/+126
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-10-31arm: Add export.h to ARM specific files as required.Paul Gortmaker2-0/+2
These files all make use of one of the EXPORT_SYMBOL variants or the THIS_MODULE macro. So they will need <linux/export.h> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01ARM: gic: use module.h instead of export.hArnd Bergmann1-1/+1
The module.h cleanup series is not merged at this point, so use the older header file for now, to make it build either way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'dt/gic' into next/dtArnd Bergmann2-46/+329
Conflicts: arch/arm/include/asm/localtimer.h arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-omap2/board-generic.c
2011-10-31ARM: gic: fix irq_alloc_descs handling for sparse irqRob Herring1-4/+11
Commit "ARM: gic: add irq_domain support" (b49b6ff) breaks SPARSE_IRQ on platforms with GIC. When SPARSE_IRQ is enabled, all NR_IRQS or mach_desc->nr_irqs will be allocated by arch_probe_nr_irqs(). This caused irq_alloc_descs to allocate irq_descs after the pre-allocated space. Make irq_alloc_descs search for an exact irq range and assume it has been pre-allocated on failure. For DT probing dynamic allocation is used. DT enabled platforms should set their nr_irqs to NR_IRQ_LEGACY and have all irq_chips allocate their irq_descs with irq_alloc_descs if SPARSE_IRQ is enabled. gic_init irq_start param is changed to be signed with negative meaning do dynamic Linux irq assigment. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-31ARM: gic: add OF based initializationRob Herring1-0/+61
This adds ARM gic interrupt controller initialization using device tree data. The initialization function is intended to be called by of_irq_init function like this: const static struct of_device_id irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; static void __init init_irqs(void) { of_irq_init(irq_match); } Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31ARM: gic: add irq_domain supportRob Herring2-62/+57
Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds1-11/+220
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-27Merge branch 'clk' of ↵Linus Torvalds2-1/+17
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds1-1/+1
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-26Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock() lockdep: Comment all warnings lib: atomic64: Change the type of local lock to raw_spinlock_t locking, lib/atomic64: Annotate atomic64_lock::lock as raw locking, x86, iommu: Annotate qi->q_lock as raw locking, x86, iommu: Annotate irq_2_ir_lock as raw locking, x86, iommu: Annotate iommu->register_lock as raw locking, dma, ipu: Annotate bank_lock as raw locking, ARM: Annotate low level hw locks as raw locking, drivers/dca: Annotate dca_lock as raw locking, powerpc: Annotate uic->lock as raw locking, x86: mce: Annotate cmci_discover_lock as raw locking, ACPI: Annotate c3_lock as raw locking, oprofile: Annotate oprofilefs lock as raw locking, video: Annotate vga console lock as raw locking, latencytop: Annotate latency_lock as raw locking, timer_stats: Annotate table_lock as raw locking, rwsem: Annotate inner lock as raw locking, semaphores: Annotate inner lock as raw locking, sched: Annotate thread_group_cputimer as raw ... Fix up conflicts in kernel/posix-cpu-timers.c manually: making cputimer->cputime a raw lock conflicted with the ABBA fix in commit bcd5cff7216f ("cputimer: Cure lock inversion").
2011-10-25Merge branch 'misc' into for-linusRussell King1-1/+1
Conflicts: arch/arm/mach-integrator/integrator_ap.c
2011-10-25Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', ↵Russell King2-4/+16
'p2v', 'pgt' (early part) and 'smp' into for-linus
2011-10-23Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King1-14/+46
git://github.com/mzyngier/arm-platforms into devel-stable
2011-10-23ARM: gic, local timers: use the request_percpu_irq() interfaceMarc Zyngier1-52/+0
This patch remove the hardcoded link between local timers and PPIs, and convert the PPI users (TWD, MCT and MSM timers) to the new *_percpu_irq interface. Also some collateral cleanup (local_timer_ack() is gone, and the interrupt handler is strictly private to each driver). PPIs are now useable for more than just the local timers. Additional testing by David Brown (msm8250 and msm8660) and Shawn Guo (imx6q). Cc: David Brown <davidb@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23ARM: gic: consolidate PPI handlingMarc Zyngier1-1/+74
PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-22ARM: 7136/1: pl330: Fix a race conditionJavi Merino1-1/+1
If two requests have been submitted and one of them is running, if you call pl330_chan_ctrl(ch_id, PL330_OP_START), there's a window of time between the spin_lock_irqsave() and the _state() check in which the running transaction may finish. In that case, we don't receive the interrupt (because they are disabled), but _start() sees that the DMA is stopped, so it starts it. The problem is that it sends the transaction that has just finished again, because pl330_update() hasn't mark it as done yet. This patch fixes this race condition by not calling _start() if the DMA is already executing transactions. When interrupts are reenabled, pl330_update() will call _start(). Reference: <1317892206-3600-1-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7061/1: gic: convert logical CPU numbers into physical numbersWill Deacon1-3/+14
The GIC driver must convert logical CPU numbers passed in from Linux into physical CPU numbers that are understood by the hardware. This patch uses the new cpu_logical_map macro for performing the conversion inside the GIC driver. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-15ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUSZoltan Devai1-1/+0
This is unneeded and causes an abort on the SPMP8000 platform. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zoltan Devai <zoss@devai.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: common/vic: use proper __iomem annotationsArnd Bergmann1-1/+2
In vic_init, we pass addr into readl, so it needs to be a pointer, not a u32 address. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-27clk: timer-sp: convert to clk_prepare()/clk_unprepare()Russell King1-0/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27clk: sa1111: convert to clk_prepare()/clk_unprepare()Russell King1-1/+8
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23ARM: gic: Allow gic arch extensions to provide irqchip flagsColin Cross1-0/+1
Tegra can benefit from the IRQCHIP_MASK_ON_SUSPEND flag, allow it to be passed to the gic irq chip. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23ARM: gic: Use cpu pm notifiers to save gic stateColin Cross1-0/+187
When the cpu is powered down in a low power mode, the gic cpu interface may be reset, and when the cpu cluster is powered down, the gic distributor may also be reset. This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save and restore the gic cpu interface registers, and the CPU_CLUSTER_PM_ENTER and CPU_CLUSTER_PM_EXIT notifiers to save and restore the gic distributor registers. Original-author: Gary King <gking@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-13locking, ARM: Annotate low level hw locks as rawThomas Gleixner1-13/+13
Annotate the low level hardware locks which must not be preempted. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King1-1/+1
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-29Merge branch 'linux-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds1-6/+0
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-22Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', ↵Russell King4-152/+124
'mmci', 'suspend' and 'vfp' into for-next
2011-07-22PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.Ralf Baechle1-1/+1
Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-21ARM: GIC: avoid routing interrupts to offline CPUsRussell King1-3/+3
The irq_set_affinity() method can be called with masks which include offline CPUs. This allows offline CPUs to have interrupts routed to them by writing to /proc/irq/*/smp_affinity after hotplug has taken a CPU offline. Fix this by ensuring that we select a target CPU present in both the required affinity and the online CPU mask. Ensure that we return IRQ_SET_MASK_OK (which happens to be 0) on success to ensure generic code copies the new mask into the irq_data structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-21ARM: CPU hotplug: fix abuse of irqdesc->nodeRussell King1-1/+0
irqdesc's node member is supposed to mark the numa node number for the interrupt. Our use of it is non-standard. Remove this, replacing the functionality with a test of the affinity mask. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-20ARM: GIC: move gic_chip_data structure declaration to headerChanghwan Youn1-6/+0
Since Samsung EXYNOS4210 cannot support register banking in GIC, so needs to update CPU interface base address. The 'gic_chip_data' is used for it, this patch moves gic_chip_data structure declaraton to arch/arm/include/asm/hardware/gic.h to use it. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-11Merge branch 'master' into for-nextJiri Kosina1-1/+1
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-04ARM: dmabounce: no need to check dev->bus type in needs_bounce functionRussell King1-2/+1
As the needs_bounce function is passed at DMA bounce register time, we already know what the device bus type is, so we don't need to check it each time the needs_bounce function is called. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-04ARM: dmabounce: get rid of dma_needs_bounce global functionRussell King3-40/+45
Pass the device type specific needs_bounce function in at dmabounce register time, avoiding the need for a platform specific global function to do this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: correct unmap_single dev_dbgRussell King1-2/+2
DMA addresses should not be casted to void * for printing. Fix that to be consistent with the rest of the file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: check pointer against NULL not 0Russell King1-1/+1
Pointers should be checked against NULL rather than 0, otherwise we get sparse warnings. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: remove useless pr_errRussell King1-4/+1
We already check that dev != NULL, so this won't be reached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: move decision for bouncing into __dma_map_page()Russell King1-66/+58
Move the decision whether to bounce into __dma_map_page(), before the check for high pages. This avoids triggering the high page check for devices which aren't using dmabounce. Fix the unmap path to cope too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: separate out decision to bounceRussell King1-18/+28
Move the decision to perform DMA bouncing out of map_single() into its own stand-alone function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: avoid needless valid_dma_direction() checkRussell King1-2/+0
This check is done at the DMA API level, so there's no point repeating it here. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dma-mapping: define dma_(un)?map_single in terms of dma_(un)?map_pageRussell King1-28/+0
Use dma_map_page()/dma_unmap_page() internals to handle dma_map_single() and dma_unmap_single(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-03ARM: dmabounce: fix map_single() error return valueRussell King1-1/+1
When map_single() is unable to obtain a safe buffer, we must return the dma_addr_t error value, which is ~0 rather than 0. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 22:31:29 +0000