| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Feed untrusted RNGs into /dev/random
- Allow HWRNG sleeping to be more interruptible
- Create lib/utils module
- Setting private keys no longer required for akcipher
- Remove tcrypt mode=1000
- Reorganised Kconfig entries
Algorithms:
- Load x86/sha512 based on CPU features
- Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
Drivers:
- Add HACE crypto driver aspeed"
* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: aspeed - Remove redundant dev_err call
crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
crypto: aead - Remove unused inline functions from aead
crypto: bcm - Simplify obtain the name for cipher
crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
hwrng: core - start hwrng kthread also for untrusted sources
crypto: zip - remove the unneeded result variable
crypto: qat - add limit to linked list parsing
crypto: octeontx2 - Remove the unneeded result variable
crypto: ccp - Remove the unneeded result variable
crypto: aspeed - Fix check for platform_get_irq() errors
crypto: virtio - fix memory-leak
crypto: cavium - prevent integer overflow loading firmware
crypto: marvell/octeontx - prevent integer overflows
crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
crypto: hisilicon/qm - fix the qos value initialization
crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
crypto: tcrypt - add async speed test for aria cipher
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
crypto: aria - prepare generic module for optimized implementations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Fix 'mfd_of_node_list' OF node entry resource leak
New Drivers:
- Add support for Ocelot VSC7512 Networking Chip
- Add support for MediaTek MT6370 subPMIC
- Add support for Richtek RT5120 (I2C) PMIC
New Device Support:
- Add support for Rockchip RV1126 and RK3588 to Syscon
- Add support for Rockchip RK817 Battery Charger to RK808
- Add support for Silergy SY7636a Voltage Regulator to Simple MFD
- Add support for Qualcomm PMP8074 PMIC to QCOM SPMI
- Add support for Secure Update to Intel M10 BMC
New Functionality:
- Provide SSP type to Intel's LPSS (PCI) SPI driver
Fix-ups:
- Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon
- Unify / simplify; intel_soc_pmic_crc
- Trivial reordering / spelling, etc; Makefile, twl-core
- Convert to managed resources; intel_soc_pmic_crc
- Use appropriate APIs; intel_soc_pmic_crc
- strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core
- GPIOD conversion; htc-i2cpld, stmpe
- Add missing header file includes; twl4030-irq
- DT goodies; stmpe, mediatek,mt6370, x-powers,axp152,
aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon,
qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063
Bug Fixes:
- Properly check return values; sm501, htc-i2cpld
- Repair Two-Wire Bus Mode; da9062-core
- Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788,
lp8788-irq"
* tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: syscon: Remove repetition of the regmap_get_val_endian()
mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE
power: supply: Add charger driver for Rockchip RK817
dt-bindings: mfd: mt6370: Fix the indentation in the example
mfd: da9061: Fix Failed to set Two-Wire Bus Mode.
mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()
dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018
mfd: sm501: Add check for platform_driver_register()
dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186
mfd: twl4030: Add missed linux/device.h header
dt-bindings: mfd: dlg,da9063: Add missing regulator patterns
dt-bindings: mfd: sprd: Add bindings for ums512 global registers
mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc
dt-bindings: mfd: syscon: Add rk3588 QoS register compatible
mfd: stmpe: Switch to using gpiod API
mfd: qcom-spmi-pmic: Add pm7250b compatible
dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver
mfd: intel-m10-bmc: Add d5005 bmc secure update driver
dt-bindings: mfd: syscon: Drop ref from reg-io-width
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The main changes this time are for the organization of the Kconfig
files, introducing per-vendor top-level options on arm64 to match
those on arm32, and making the platform selection on arm32 more
uniform, in particular for the remaining StrongARM platforms that
still have a couple of special cases compared to the more recent ones.
I also did a cleanup of the old Footbridge platform, which was the
last holdout for the phys_to_dma()/dma_to_phys() interface that is now
completely gone from arm32, completing work started by Christoph
Hellwig"
* tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: aspeed: Kconfig: Fix indentation
ARM: Drop CMDLINE_* dependency on ATAGS
ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORM
ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h
pxa: Drop if with an always false condition
ARM: orion: fix include path
ARM: shmobile: Drop selecting SOC_BUS
arm64: renesas: Drop selecting SOC_BUS
ARM: disallow PCI with MMU=n again
ARM: footbridge: remove custom DMA address handling
MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
ARM: footbridge: move isa-dma support into footbridge
ARM: footbridge: remove leftover from personal-server
ARM: footbridge: remove addin mode
arm64: Kconfig.platforms: Group NXP platforms together
arm64: Kconfig.platforms: Re-organized Broadcom menu
ARM: make ARCH_MULTIPLATFORM user-visible
ARM: fix XIP_KERNEL dependencies
ARM: Kconfig: clean up platform selection
ARM: simplify machdirs/platdirs handling
...
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the
most updates, which corresponds to their dominance in the mobile phone
and embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial and
automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels, as
they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt.
Mitchell
- Three new machines based on Rockchips RK3399 and RK3566: Anberic
RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family: SAMA5D3-EDS
and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs"
* tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits)
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
|
Adding the #address-cells/#size-cells properties without also
adding the other required properties for PCI nodes causes new
build warnings from dtc that now show up everywhere, rather than
just while verifying the yaml bindings:
arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Revert it for now.
Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
* tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
"Most of the collected changes here are fixes across the tree for
various hardening features (details noted below).
The most notable new feature here is the addition of the memcpy()
overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
on the path to killing the common class of "trivially detectable"
buffer overflow conditions (i.e. on arrays with sizes known at compile
time) that have resulted in many exploitable vulnerabilities over the
years (e.g. BleedingTooth).
This feature is expected to still have some undiscovered false
positives. It's been in -next for a full development cycle and all the
reported false positives have been fixed in their respective trees.
All the known-bad code patterns we could find with Coccinelle are also
either fixed in their respective trees or in flight.
The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN
for cross-field memcpy()") for the feature has extensive details, but
I'll repeat here that this is a warning _only_, and is not intended to
actually block overflows (yet). The many patches fixing array sizes
and struct members have been landing for several years now, and we're
finally able to turn this on to find any remaining stragglers.
Summary:
Various fixes across several hardening areas:
- loadpin: Fix verity target enforcement (Matthias Kaehlcke).
- zero-call-used-regs: Add missing clobbers in paravirt (Bill
Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van
Assche).
- Clang: Adjust compiler flag detection for various Clang changes
(Sami Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning"
* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
sparc: Unbreak the build
x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
x86/paravirt: clean up typos and grammaros
fortify: Convert to struct vs member helpers
fortify: Explicitly check bounds are compile-time constants
x86/entry: Work around Clang __bdos() bug
ARM: decompressor: Include .data.rel.ro.local
fortify: Adjust KUnit test for modular build
sh: machvec: Use char[] for section boundaries
kunit/memcpy: Avoid pathological compile-time string size
lib: Improve the is_signed_type() kunit test
LoadPin: Require file with verity root digests to have a header
dm: verity-loadpin: Only trust verity targets with enforcement
LoadPin: Fix Kconfig doc about format of file with verity digests
um: Enable FORTIFY_SOURCE
lkdtm: Update tests for memcpy() run-time warnings
fortify: Add run-time WARN for cross-field memcpy()
fortify: Use SIZE_MAX instead of (size_t)-1
...
|
|
Pull ARM fixes from Russell King:
"Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9243/1: riscpc: Unbreak the build
|
|
Drop second "pins" suffix from pin configuration/mux nodes.
Link: https://lore.kernel.org/r/20220926125824.477920-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Updates from Kunihiko Hayashi via email:
"Update devicetree sources for UniPhier armv8 SoCs to remove dtschema
warnings, add support existing features that haven't yet been
described, and replace constants with macros."
* uniphier/dt:
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
ARM: dts: uniphier: Rename pvtctl node to thermal-sensor
|
|
PXs3 reference board can change each USB port 0 and 1 to device mode
with jumpers. Prepare devicetree sources for USB port 0 and 1.
This specifies dr_mode, pinctrl, and some quirks and removes nodes for
unused phys and vbus-supply properties.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The generic platform driver pcie-designware-plat.c doesn't work for
UniPhier PCIe endpoint controller, because the controller has some
necessary initialization sequence for the controller-specific logic.
Currently the controller doesn't use "snps,dw-pcie-ep" compatible,
so this is no longer needed. Remove the compatible string from the
pcie-ep node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
uniphier-support-card
The dtschema warning:
uniphier-ld11-ref.dt.yaml: system-bus@58c00000: 'interrupt-parent' does not
match any of the regexes: '^.*@[1-5],[1-9a-f][0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-9-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add ahci core controller and glue layer nodes including reset-controller
and sata-phy.
This supports for PXs2 and the boards without PXs2 vodka board that
doesn't implement any SATA connectors.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue
layer includes reset and phy, and the clock node is used for handling ahci
clocks on SoC-glue.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-7-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use human-readable definitions for GIC interrupt type and flag, instead of
hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-6-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.
uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-5-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This "usb-glue" stands for an external controller associated with USB core,
however, this is not common. So rename to "usb-controller".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-4-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Actual phy nodes are each child node. The parent node should be
usb-controller node as a representation of the phy integration.
This applies to the devicetree for Pro4 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-3-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The pvtctl node belongs to thermal-sensor, so the node name should be
renamed to thermal-sensor.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-2-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A check for CONFIG_DEBUG_LL_SER3 was added in v2.5.43. But the related
symbol DEBUG_LL_SER3 was already removed in v2.5.8. This check has
always evaluated to false. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 6.1
- New machines
* AMD's DaytonaX AST2600 BMC, for the amd64 server
* Ampre's Mt. Mitchell AST2600 BMC, for the AmpereOne arm64 server
- Fixes and updates for bletchley, mtjade, yosemitev2 and the ast2600-evb
* tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb-a1: Add compatible
ARM: dts: aspeed: ast2600evb: Fix compatible string
ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
ARM: dts: aspeed-g6: Enable more UART controllers
ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver
ARM: dts: aspeed: Add AMD DaytonaX BMC
dt-bindings: arm: aspeed: document AMD DaytonaX
ARM: dts: aspeed: Yosemite V2: Enable OCP debug card
ARM: dts: aspeed: mtjade: Remove gpio-keys entries
ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles
ARM: dts: aspeed: bletchley: Remove hdc1080 node
ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
ARM: dts: aspeed: ast2600-evb: Update I2C devices
Link: https://lore.kernel.org/r/CACPK8Xepnci+f+7Pi1jtXod8Jmt+OnJYfDRENjiP-xDBQwFCVg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
We also need to patch relevant DTS files, as the original code relied on
the fact that of_get_named_gpio_flags() would fetch any data encoded in
GPIO flags, even if it does not reflect valid flags for a GPIO.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YxeS1BK2OBH1P/kO@google.com
|
|
The AST2600 EVB A1 is an AST2600 EVB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The AST2600 EVB is not an A1.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Now that the pinctrl definitions of the ast2600 SoC have been fixed,
see commit 925fbe1f7eb6 ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI
function/group"), it is safe to activate QSPI on the ast2600 evb.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Setup the configuration of UART6, UART7, UART8, and UART9 in
aspeed-g6.dtsi.
Signed-off-by: Ken Chen <j220584470k@gmail.com>
Link: https://lore.kernel.org/r/20220805090957.470434-1-j220584470k@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Removed NIC EEPROM driver IPMB-12 channel and enabled it as
generic i2c EEPROM.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
|
|
A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.
The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:
drm_gem_cma_create()
dma_alloc_attrs()
dma_alloc_from_dev_coherent()
__dma_alloc_from_coherent()
dma_get_device_base()
phys_to_dma()
translate_phys_to_dma()
phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.
There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.
Solution:
- Fix the LB (logic bus) ranges to be 1-to-1 like they should
have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.
This makes the DMA ranges work right and makes the PL110
framebuffer work again.
Fixes: af6f23b88e95 ("ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220926073311.1610568-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 6.1 (part 1)
Add definitions for PCIe legacy INTx interrupts for dts using
pci-mvebu.c controller driver.
Add gpio-ranges for pin muxing for Armada 38x
Add audio support for Armada 38x
Turris-omnia (Armada 385 based) fix a pin name
lsxl (kirkwood based)
- Fix fix serial line
- Remove first ethernet port
* tag 'mvebu-dt-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: (22 commits)
ARM: dts: turris-omnia: Add label for wan port
ARM: dts: turris-omnia: Define S/PDIF audio card
ARM: mvebu: Add spdif-pins mpp pins for Armada 38x
ARM: mvebu: add audio support to Armada 385 DB
ARM: mvebu: add audio I2S controller to Armada 38x Device Tree
ARM: dts: armada-38x: Add gpio-ranges for pin muxing
ARM: dts: dove: Add definitions for PCIe error interrupts
ARM: dts: kirkwood: Add definitions for PCIe error interrupts
ARM: dts: armada-39x.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-380.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-375.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-xp-mv78460.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-xp-mv78260.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-xp-mv78230.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-xp-98dx3236.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: armada-370.dtsi: Add definitions for PCIe legacy INTx interrupts
ARM: dts: dove: Add definitions for PCIe legacy INTx interrupts
ARM: dts: kirkwood: Add definitions for PCIe legacy INTx interrupts
ARM: dts: kirkwood: lsxl: remove first ethernet port
ARM: dts: kirkwood: lsxl: fix serial line
...
Link: https://lore.kernel.org/r/87edw2xfle.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
* tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
ARM: dts: am335x-baltos: add GPIO names for ir2110 device
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
ARM: dts: am335x-baltos: change nand-xfer-type
Link: https://lore.kernel.org/r/pull-1663587735-853102@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Device tree label property should contain label from the box/stick.
Labels for other ports are already specified in DT but wan is missing.
So add missing label for wan port.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF
output mode. So define S/PDIF audio output card for this pin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp
pins section for it. It is needed for boards without i2s.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This commit adds the necessary Device Tree information to enable
audio support on the Armada 385 DB platform. In details it:
* Instantiates the CS42L51 audio codec on the I2C0 bus
* Adds simple-card DT binding for audio on Armada 385 DB
* Adds description for both analog I2S and S/PDIF I/O
* Disabled by default
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Star_Automation <star@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This commit adds the description of the I2S controller to the Marvell
Armada 38x SoC's Device Tree, as well as its pin configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
[pali: Fix i2s-pins name]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The DT parser is dependent on the PCI device being tagged as
device_type = "pci" in order to parse memory ranges properly.
Fix this up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v6.1 (take two)
- Merge Renesas ARM/ARM64 maintainers entries,
- CAN support for the RZ/N1 SoC and the RZN1D-DB development board,
- Watchdog, pin control, I2C (EEPROM), GPIO (LEDS/switches), and
Ethernet support for the R-Car V4H SoC and the White Hawk
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (26 commits)
arm64: dts: renesas: Adjust whitespace around '{'
arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS
arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2
ARM: dts: renesas: Fix USB PHY device and child node names
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
arm64: dts: renesas: white-hawk-cpu: Add missing bootargs
arm64: dts: renesas: spider-cpu: Add missing bootargs
arm64: dts: renesas: spider: Move aliases and chosen
arm64: dts: renesas: white-hawk-cpu: Add Ethernet support
arm64: dts: renesas: white-hawk: Move aliases and chosen
arm64: dts: renesas: r8a779g0: Add RAVB nodes
arm64: dts: renesas: white-hawk-cpu: Add push switches
arm64: dts: renesas: white-hawk-cpu: Add GP LEDs
arm64: dts: renesas: r8a779g0: Add GPIO nodes
arm64: dts: renesas: white-hawk: Add Ethernet sub-board
arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board
arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs
arm64: dts: renesas: r8a779g0: Add I2C nodes
arm64: dts: renesas: white-hawk-cpu: Add serial port pin control
arm64: dts: renesas: r8a779g0: Add pinctrl device node
...
Link: https://lore.kernel.org/r/cover.1663588776.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
