summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2016-08-01Merge tag 'armsoc-dt' of ↵Linus Torvalds384-6786/+20433
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds14-24/+59
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-31Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds4-4/+7
Pull watchdog updates from Wim Van Sebroeck: "Core: - min and max timeout improvements, WDOG_HW_RUNNING improvements, status funtionality - Add a device managed API for watchdog_register_device() New watchdog drivers: - Aspeed SoCs - Maxim PMIC MAX77620 - Amlogic Meson GXBB SoC Enhancements: - support for the r8a7796 watchdog device - support for F81866 watchdog device - support for 5th variation of Apollo Lake - support for MCP78S chipset - clean-up of softdog.c watchdog device driver - pic32-wdt and pic32-dmt fixes - Documentation/watchdog: watchdog-test improvements - several other fixes and improvements" * git://www.linux-watchdog.org/linux-watchdog: (50 commits) watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe() watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function watchdog: core: Fix error handling of watchdog_dev_init() watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe() watchdog: pic32-dmt: Remove .owner field for driver watchdog: pic32-wdt: Remove .owner field for driver watchdog: renesas-wdt: Add support for the r8a7796 wdt Documentation/watchdog: check return value for magic close watchdog: sbsa: Drop status function watchdog: Implement status function in watchdog core watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout watchdog: change watchdog_need_worker logic watchdog: add support for MCP78S chipset in nv_tco watchdog: bcm2835_wdt: remove redundant ->set_timeout callback watchdog: bcm2835_wdt: constify _ops and _info structures dt-bindings: watchdog: Add Meson GXBB Watchdog bindings watchdog: Add Meson GXBB Watchdog Driver watchdog: qcom: configure BARK time in addition to BITE time watchdog: qcom: add option for standalone watchdog not in timer block watchdog: qcom: update device tree bindings ...
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds5-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-07-30Merge tag 'clk-for-linus-4.8' of ↵Linus Torvalds1-252/+60
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The bulk of the changes are updates and fixes to existing clk provider drivers, along with a pretty standard number of new drivers. The core recieved a small number of updates as well. Core changes of note: - removed CLK_IS_ROOT flag New clk provider drivers: - Renesas r8a7796 clock pulse generator / module standby and software reset - Allwinner sun8i H3 clock controller unit - AmLogic meson8b clock controller (rewritten) - AmLogic gxbb clock controller - support for some new ICs was added by simple changes to static data tables for chips sharing the same family Driver updates of note: - the Allwinner sunxi clock driver infrastucture was rewritten to comform to the state of the art at drivers/clk/sunxi-ng. The old implementation is still supported for backwards compatibility with the DT ABI" * tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits) clk: Makefile: re-sort and clean up Revert "clk: gxbb: expose CLKID_MMC_PCLK" clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver clk: samsung: make clk-s5pv210-audss explicitly non-modular clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks clk: oxnas: Add hardware dependencies clk: imx7d: do not set parent of ethernet time/ref clocks ARM: dt: sun8i: switch the H3 to the new CCU driver clk: sunxi-ng: h3: Fix Kconfig symbol typo clk: sunxi-ng: h3: Fix audio clock divider offset clk: sunxi-ng: Add H3 clocks clk: sunxi-ng: Add N-K-M-P factor clock clk: sunxi-ng: Add N-K-M Factor clock clk: sunxi-ng: Add N-M-factor clock support clk: sunxi-ng: Add N-K-factor clock support clk: sunxi-ng: Add M-P factor clock support clk: sunxi-ng: Add divider clk: sunxi-ng: Add phase clock support clk: sunxi-ng: Add mux clock support clk: sunxi-ng: Add gate clock support ...
2016-07-29Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-5/+1
Pull ARM updates from Russell King: "Included in this update are: - Patches from Gregory Clement to fix the coherent DMA cases in our dma-mapping code. - A number of CPU errata updates and fixes. - ARM cpuidle improvements from Jisheng Zhang. - Fix from Kees for the location of _etext. - Cleanups from Masahiro Yamada to avoid duplicated messages during the kernel build, and remove CONFIG_ARCH_HAS_BARRIERS. - Remove a udelay loop limitation, allowing for faster CPUs to calibrate the delay correctly. - Cleanup some left-overs from the SW PAN implementation. - Ensure that a modified address limit is not visible to exception handlers" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits) ARM: 8586/1: cpuidle: make arm_cpuidle_suspend() a bit more efficient ARM: 8585/1: cpuidle: fix !cpuidle_ops[cpu].init case during init ARM: 8561/4: dma-mapping: Fix the coherent case when iommu is used ARM: 8561/3: dma-mapping: Don't use outer_flush_range when the L2C is coherent ARM: 8560/1: errata: Workaround errata A12 825619 / A17 852421 ARM: 8559/1: errata: Workaround erratum A12 821420 ARM: 8558/1: errata: Workaround errata A12 818325/852422 A17 852423 ARM: save and reset the address limit when entering an exception ARM: 8577/1: Fix Cortex-A15 798181 errata initialization ARM: 8584/1: floppy: avoid gcc-6 warning ARM: 8583/1: mm: fix location of _etext ARM: 8582/1: remove unused CONFIG_ARCH_HAS_BARRIERS ARM: 8306/1: loop_udelay: remove bogomips value limitation ARM: 8581/1: add missing <asm/prom.h> to arch/arm/kernel/devtree.c ARM: 8576/1: avoid duplicating "Kernel: arch/arm/boot/*Image is ready" ARM: 8556/1: on a generic DT system: do not touch l2x0 ARM: uaccess: remove put_user() code duplication ARM: 8580/1: Remove orphaned __addr_ok() definition ARM: get rid of horrible *(unsigned int *)(regs + 1) ARM: introduce svc_pt_regs structure ...
2016-07-27Merge tag 'leds_for_4.8' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings
2016-07-27Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+16
Pull EDAC updates from Borislav Petkov: "This last cycle, Thor was busy adding Arria10 eth FIFO support to the altera_edac driver along with other improvements. We have two cleanups/fixes too. Summary: - Altera Arria10 ethernet FIFO buffer support (Thor Thayer) - Minor cleanups" * tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: dts: Add Arria10 Ethernet EDAC devicetree entry EDAC, altera: Add Arria10 Ethernet EDAC support EDAC, altera: Add Arria10 ECC memory init functions Documentation: dt: socfpga: Add Arria10 Ethernet binding EDAC, altera: Drop some ifdeffery EDAC, altera: Add panic flag check to A10 IRQ EDAC, altera: Check parent status for Arria10 EDAC block EDAC, altera: Make all private data structures static EDAC: Correct channel count limit EDAC, amd64_edac: Init opstate at the proper time during init EDAC, altera: Handle Arria10 SDRAM child node EDAC, altera: Add ECC Manager IRQ controller support Documentation: dt: socfpga: Add interrupt-controller to ecc-manager
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds6-167/+176
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-26Merge tag 'regulator-v4.8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A quiet regulator API release, a few new drivers and some fixes but nothing too notable. There will also be some updates for the PWM regulator coming through the PWM tree which provide much smoother operation when taking over an already running PWM regulator after boot using some new PWM APIs. Summary: - Support for configuration of the initial suspend state from DT. - New drivers for Mediatek MT6323, Ricoh RN5T567 and X-Powers AXP809" * tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (38 commits) regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits regulator: mt6323: Constify struct regulator_ops regulator: mt6323: Fix module description regulator: mt6323: Add support for MT6323 regulator regulator: Add document for MT6323 regulator regulator: da9210: addition of device tree support regulator: act8865: Fix missing of_node_put() in act8865_pdata_from_dt() regulator: qcom_smd: Avoid overlapping linear voltage ranges regulator: s2mps11: Fix the voltage linear range for s2mps15 regulator: pwm: Fix regulator ramp delay for continuous mode regulator: da9211: add descriptions for da9212/da9214 mfd: rn5t618: Register restart handler mfd: rn5t618: Register power off callback optionally regulator: rn5t618: Add RN5T567 PMIC support mfd: rn5t618: Add Ricoh RN5T567 PMIC support ARM: dts: meson: minix-neo-x8: define PMIC as power controller regulator: tps65218: force set power-up/down strobe to 3 for dcdc3 regulator: tps65218: Enable suspend configuration regulator: tps65217: Enable suspend configuration regulator: qcom_spmi: Add support for get_mode/set_mode on switches ...
2016-07-26Merge branch 'for-4.8' of ↵Linus Torvalds2-0/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
2016-07-26Merge branch 'linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.8: API: - first part of skcipher low-level conversions - add KPP (Key-agreement Protocol Primitives) interface. Algorithms: - fix IPsec/cryptd reordering issues that affects aesni - RSA no longer does explicit leading zero removal - add SHA3 - add DH - add ECDH - improve DRBG performance by not doing CTR by hand Drivers: - add x86 AVX2 multibuffer SHA256/512 - add POWER8 optimised crc32c - add xts support to vmx - add DH support to qat - add RSA support to caam - add Layerscape support to caam - add SEC1 AEAD support to talitos - improve performance by chaining requests in marvell/cesa - add support for Araneus Alea I USB RNG - add support for Broadcom BCM5301 RNG - add support for Amlogic Meson RNG - add support Broadcom NSP SoC RNG" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits) crypto: vmx - Fix aes_p8_xts_decrypt build failure crypto: vmx - Ignore generated files crypto: vmx - Adding support for XTS crypto: vmx - Adding asm subroutines for XTS crypto: skcipher - add comment for skcipher_alg->base crypto: testmgr - Print akcipher algorithm name crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op crypto: nx - off by one bug in nx_of_update_msc() crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: scatterwalk - Inline start/map/done crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone crypto: scatterwalk - Fix test in scatterwalk_done crypto: api - Optimise away crypto_yield when hard preemption is on crypto: scatterwalk - add no-copy support to copychunks crypto: scatterwalk - Remove scatterwalk_bytes_sglen crypto: omap - Stop using crypto scatterwalk_bytes_sglen crypto: skcipher - Remove top-level givcipher interface crypto: user - Remove crypto_lookup_skcipher call crypto: cts - Convert to skcipher ...
2016-07-24Merge tag 'usb-4.8-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB driver update for 4.8-rc1. Lots of the normal stuff in here, musb, gadget, xhci, and other updates and fixes. All of the details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) cdc-acm: beautify probe() cdc-wdm: use the common CDC parser cdc-acm: cleanup error handling cdc-acm: use the common parser usbnet: move the CDC parser into USB core usb: musb: sunxi: Simplify dr_mode handling usb: musb: sunxi: make unexported symbols static usb: musb: cppi41: add dma channel tracepoints usb: musb: cppi41: move struct cppi41_dma_channel to header usb: musb: cleanup cppi_dma header usb: musb: gadget: add usb-request tracepoints usb: musb: host: add urb tracepoints usb: musb: add tracepoints to dump interrupt events usb: musb: add tracepoints for register access usb: musb: dsps: use musb register read/write wrappers instead usb: musb: switch dev_dbg to tracepoints usb: musb: add tracepoints support for debugging usb: quirks: Add no-lpm quirk for Elan phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt phy: rockhip-usb: use devm_add_action_or_reset() ...
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-23/+31
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22ARM: dts: fix STMicroelectronics compatible stringsStefan Agner5-5/+5
Replace the non-standard vendor prefix stm with st for STMicroelectronics. The drivers do not specify the vendor prefixes since the I2C Core strips them away from the DT provided compatible string. Therefore, changing existing device trees does not have any impact on device detection. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-21Merge tag 'renesas-dt-fixes-for-v4.8' of ↵Arnd Bergmann1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Fixes for v4.8" from Simon Horman: * Corrections to r8a7792 * tag 'renesas-dt-fixes-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a7792: remove ADSP clock ARM: dts: r8a7792: add PLL1 divided by 2 clock
2016-07-21Merge tag 'mvebu-dt-4.8-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann1-16/+0
Merge "mvebu dt for 4.8 (part 1)" from Gregory CLEMENT: Fix dts for the clearfog board (Armada 388 SoC based) * tag 'mvebu-dt-4.8-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-388-clearfog: remove duplicate mdio entry
2016-07-21Merge tag 'sunxi-dt-for-4.8-2-bis' of ↵Arnd Bergmann15-979/+545
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner DT changes for 4.8, take 2" from Maxime Ripard: Another set of changes for the 4.8 merge window, among which: - Reworking of the DT for the tablets based on Allwinner reference design and q8 designs to avoid duplication as much as possible - Renaming a DT merged in the first PR for consistency - Enable a few devices on some boards - New boards: Polaroid MID2407PXE03, inet86dz * tag 'sunxi-dt-for-4.8-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (21 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: sun7i: bananapi-m1-plus: red LED is power LED ARM: dts: sun7i: bananapi-m1-plus: Unify suffix for board specific labels ARM: dts: sun7i: bananapi-m1-plus: Reindent whole file using tabs ARM: dts: sun7i: lamobo-r1: Enable audio codec ARM: dts: sun7i: lamobo-r1: Fix GPIO flags in reg_ahci_5v ARM: dts: sun8i-h3: Rename sinovoip-bpi-m2-plus to bananapi-m2-plus ARM: dts: sun7i: lamobo-r1: Remove usb1 vbus regulator ...
2016-07-20Merge remote-tracking branches 'regulator/topic/qcom-spmi', ↵Mark Brown1-0/+1
'regulator/topic/rn5t618', 'regulator/topic/tps65218' and 'regulator/topic/twl' into regulator-next
2016-07-18ARM: dts: sun8i: Add dts file for inet86dz boardHans de Goede2-0/+59
The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tabletHans de Goede2-0/+51
The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dtsHans de Goede1-76/+1
This results in quite a nice cleanup for this dts file. As an added bonus this also enables backlight, regulator and full otg support. I've tested that all these works as advertised. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04Hans de Goede1-206/+1
This results in quite a nice cleanup for this dts file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supplyHans de Goede1-0/+1
Add a drivevbus-supply property so that the drivevbus regulator reports the right voltage value. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsiHans de Goede2-170/+216
Copy sun8i-q8-common.dtsi to sun8i-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Note that in this case we keep sun5i-q8-common.dtsi as it is shared between a23 / a33 q8 tablets. Also we leave the usb-wifi config in there (rather then in sun8i-reference-design-tablet.dtsi) as most sun8i tablets use sdio wifi rather then usb wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dtsHans de Goede1-159/+21
This results in a nice cleanup for this dts file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dtsHans de Goede1-177/+1
This results in quite a nice cleanup for this dts file. Note as a side-effect this also enables the on board speaker / headphones out. I've tested that this works as advertised. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: reference-design-tablet: Remove mention of q8Hans de Goede1-2/+2
Remove all mention of q8 from sun5i-reference-design-tablet.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avccHans de Goede1-0/+4
Set lradc vref to the actual avcc ldo, rather then to the fixed 3v0 regulator from common-regulators.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsiHans de Goede2-1/+1
Rename sun5i-q8-common.dtsi to sun5i-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dtsHans de Goede2-36/+36
This is a preparation patch for renaming sun5i-q8-common.dtsi to sun5i-reference-design-tablet.dtsi and sharing it between all the A13 tablet dts files. Since we only have a panel config for the 18 tablets (for now) move this to the q8 specific dts file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-18ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsiHans de Goede3-2/+2
Rename sunxi-q8-common.dtsi to sunxi-reference-design-tablet.dtsi. This is part of renaming all the sun?i-q8-common.dtsi files to sun?i-reference-design-tablet.dtsi since most of the hw-config in there is shared by all sunxi tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-17watchdog: qcom: add option for standalone watchdog not in timer blockMatthew McClintock1-1/+1
Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree binding") moved to use the watchdog as a subset timer register block. Some devices have the watchdog completely standalone with slightly different register offsets as well so let's account for the differences here. The existing "kpss-standalone" compatible string doesn't make it entirely clear exactly what the device is so rename to "kpss-wdt" to reflect watchdog timer functionality. Also update ipq4019 DTS with an SoC specific compatible. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Thomas Pedersen <twp@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-17watchdog: qcom: update device tree bindingsMatthew McClintock3-3/+6
Update the compatible string to align with driver and also add SoC specific string to DTS. CC: linux-watchdog@vger.kernel.org Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Thomas Pedersen <twp@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-15Merge tag 'at91-ab-4.8-dt3' of ↵Arnd Bergmann45-249/+238
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Merge "DT Changes for 4.8 #3" from Alexandre Belloni: - Lot of fixes for dtc warnings - Separate dtb compilation for ARMv4 and ARMv5 * tag 'at91-ab-4.8-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ARM: dts: at91: sama5d4_ma5d4evk: fix regulator names ARM: dts: at91: sama5d4_ma5d4: fix regulator names ARM: dts: at91: sama5d4_xplained: fix regulator names ARM: dts: at91: sama5d3_xplained: fix regulator name ARM: dts: at91: sama5d4ek: remove useless lcd_bus ARM: dts: at91: Fix USB endpoint nodes Documentation: dt: usb: atmel-usb: add unit-address ARM: dts: at91: Fix ADC trigger nodes Documentation: dt: iio: at91_adc: fix trigger node names
2016-07-15ARM: dts: at91: Don't build unnecessary dtbsArnd Bergmann1-2/+3
Building both ARMv4 and ARMv5 dtbs when SOC_SAM_V4_V5 is an issue for kernelci because it will then attempt to boot ARMv4 kernels on at91sam9 which doesn't work. Use CONFIG_SOC_AT91RM9200 and CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitionsAlexandre Belloni9-46/+81
Separate the definitions for the emac and the gmac in different files and include them in the final board dts that uses them. Solves: Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f0028000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/ethernet@f802c000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: at91sam9g25ek: fix isi endpoint nodeAlexandre Belloni1-0/+1
Add a reg property in the endpoint node as documented in Documentation/devicetree/bindings/media/video-interfaces.txt Solves: Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000/port/endpoint@0 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: move isi definition to at91sam9g25ekAlexandre Belloni2-33/+25
The ISI is only present on the at91sam9g25, move the definition to the at91sam9g25ek board dts to avoid warnings. Solves the following warning for other 9x5ek boards: Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: fix i2c-gpio node nameAlexandre Belloni23-27/+27
i2c-gpio doesn't need a reg property. Change the node names to i2c-gpio-x as used in other dts to remove the unit-address. Solves: Warning (unit_address_vs_reg): Node /i2c@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@2 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: vinco: fix regulator nameAlexandre Belloni1-1/+1
vcc_3v3_reg is a fixed regulator and doesn't need a reg property. Remove its unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: ariag25 : fix onewire nodeAlexandre Belloni1-1/+1
Remove the unit-address from the oneiwire node as it doesn't have a reg property. Solves: Warning (unit_address_vs_reg): Node /onewire@0 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d4_ma5d4evk: fix regulator namesAlexandre Belloni1-1/+1
vcc_mmc1_reg is a fixed regulators and doesn't need a reg property. Remove its unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@2 has a unit name, but no reg property Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d4_ma5d4: fix regulator namesAlexandre Belloni1-2/+2
vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a reg property. Remove their unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d4_xplained: fix regulator namesAlexandre Belloni1-2/+2
vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a reg property. Remove their unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d3_xplained: fix regulator nameAlexandre Belloni1-1/+1
vcc_mmc0_reg is a fixed regulator and doesn't need a reg property. Remove its unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: sama5d4ek: remove useless lcd_busAlexandre Belloni1-20/+0
lcd_bus has never been mainlined and is replaced by the atmel_hlcdc driver. Remove stale nodes. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: Fix USB endpoint nodesAlexandre Belloni6-69/+69
Endpoint nodes have a reg property. Add their mandatory unit-address. This solves: Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep0 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep1 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep2 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep3 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep4 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep5 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep6 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep7 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep8 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep9 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep10 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep11 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep12 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep13 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep14 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep15 has a reg or ranges property, but no unit name Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: Fix ADC trigger nodesAlexandre Belloni6-44/+24
The triggers don't need a reg property, remove it when prenset. Also remove the unit-address from their name. This solves: Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@3 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: r8a7792: remove ADSP clockSergei Shtylyov1-1/+1
Simon Horman told me that R8A7792 has ADSP clock based on an incorrect table in the most recent R-Car gen2 manual. But when I received that manual I discovered that this is false: R8A7792 is the only Gen 2 SoC that doesn't have ADSP at all. Accordingly remove the ADSP clock from DT for the r8a7792. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>