summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ux500-dts-v5.2-armsoc' of ↵Olof Johansson3-11/+89
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of ↵Olof Johansson11-382/+1013
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-signed' of ↵Olof Johansson12-12/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson18-35/+477
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson12-6/+964
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson8-5/+117
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson10-16/+203
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson3-0/+62
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+15
Pull ARM fixes from Russell King: "A small number of ARM fixes - Fix function tracer and unwinder dependencies so that we don't end up building kernels that will crash - Fix ARMv7M nommu initialisation (missing register initialisation) - Fix EFI decompressor entry (ensuring barrier instructions are enabled prior to use)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled ARM: fix function graph tracer and unwinder dependencies
2019-04-25ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHYMatthias Kaehlcke1-2/+3
Add 'xo_board' as ref clock for the DSI PHY, it was previously hardcoded in the PLL 'driver' for the 28nm 8960 PHY. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-25LS1021A: dtsi: add ftm quad decoder entriesPatrick Havelange1-0/+28
Add the 4 Quadrature counters for this board. Reviewed-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-24ARM: dts: s5pv210: Fix camera clock provider on Goni boardKrzysztof Kozlowski2-5/+3
The camera driver (according also to bindings) registers a clock provider if clock-output-names property is present and later the sensors use registered clocks. The DTS for S5Pv210 Goni board was incorrectly adding a child node with clock output cells but without clock-output-names property. Although the DTS was compiling (with "/soc/camera/clock-controller: missing or empty reg/ranges property" warning), the clock provider was not registered. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210Krzysztof Kozlowski2-2/+17
The Universal C210 (Exynos4210) uses the secure interface of MDMA0, instead of regular one - non-secure MDMA1. DTS was overriding MDMA1 node address which caused DTC W=1 warning: arch/arm/boot/dts/exynos4.dtsi:707.25-716.6: Warning (simple_bus_reg): /soc/amba/mdma@12850000: simple-bus unit address format error, expected "12840000" Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250Krzysztof Kozlowski1-29/+29
The three fixed-clocks (xusbxti, xxti and xtcxo) are inputs to the Exynos3250 therefore they should not be inside the soc node. This also fixes DTC W=1 warning: arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on ↵Krzysztof Kozlowski1-2/+0
Exynos3250 xusbxti fixed-clock should not have address/size cells because it does not have any children. This also fixes DTC W=1 warning: arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski4-51/+51
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-04-23ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cacheArd Biesheuvel1-1/+15
The EFI stub is entered with the caches and MMU enabled by the firmware, and once the stub is ready to hand over to the decompressor, we clean and disable the caches. The cache clean routines use CP15 barrier instructions, which can be disabled via SCTLR. Normally, when using the provided cache handling routines to enable the caches and MMU, this bit is enabled as well. However, but since we entered the stub with the caches already enabled, this routine is not executed before we call the cache clean routines, resulting in undefined instruction exceptions if the firmware never enabled this bit. So set the bit explicitly in the EFI entry code, but do so in a way that guarantees that the resulting code can still run on v6 cores as well (which are guaranteed to have CP15 barriers enabled) Cc: <stable@vger.kernel.org> # v4.9+ Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-04-23ARM: dts: Add queue manager and NPE to the IXP4xx DTSILinus Walleij1-0/+11
The AHB queue manager and Network Processing Engines are present on all IXP4xx SoCs, so we add them to the overarching device tree include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: dts: Add some initial IXP4xx device treesLinus Walleij7-0/+338
This adds a device tree for the IXP4xx-based Linksys NSLU2 and Gateworks GW2358 which encompass the Gateworks Cambria family. These will be the first IXP4xx device tree platforms. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: dts: imx7s: Specify #io-channel-cells in ADC nodesAndrey Smirnov1-0/+2
Specify #io-channel-cells in ADC nodes. Needed to be able to reference them by phandle. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0Andrey Smirnov1-1/+1
Specify CS as GPIO_ACTIVE_LOW in spi0 to fix the following warning: m25p128@0 enforce active low on chipselect handle Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAINAndrey Smirnov1-1/+1
Mark i2c0 SCL as GPIO_OPEN_DRAIN to fix the following warning: gpio-36 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: Add support for ZII i.MX7 RPU2 boardAndrey Smirnov2-0/+942
Add support for ZII's i.MX7 based Remote Peripheral Unit 2 (RPU2) board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22ARM: dts: bugfix tqma7 soft reset issueBruno Thomsen2-11/+17
Running reboot command on the TQMa7 board would just hang infinite at the end of the system shutdown process. Handling of i.MX7 errata e10574: Watchdog: A watchdog timeout or software trigger will not reset the SOC. Moved pinctrl from common mba7 to common tqma7 dtsi as it improves readability of errata handling. Most integrators of this SoM will likely use the development board as inspiration for handling this SoC issue. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21ARM: dts: armada-38x: add interrupts for watchdogChris Packham1-0/+2
The first interrupt is for the regular watchdog timeout. Normally the RSTOUT line will trigger a reset before this interrupt fires but on systems with a non-standard reset it may still trigger. The second interrupt is for a timer1 which is used as a pre-timeout for the watchdog. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-21ARM: dts: imx53: Add Menlosystems M53 boardMarek Vasut2-0/+312
Add device tree for the Menlosystems board based on i.MX53 M53 SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21ARM: dts: imx53: Rename M53 SoM touchscreen nodeMarek Vasut1-1/+1
Rename the touchscreen node to match contemporary design. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnectVladimir Oltean2-2/+18
Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus. But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC are pointing towards the same internal PCS. Therefore nobody is controlling the internal PCS of eTSEC0. Upon initial ndo_open, the SGMII link is ok by virtue of U-boot initialization. But upon an ifdown/ifup sequence, the code path from ndo_open -> init_phy -> gfar_configure_serdes does not get executed for the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII link remains down for eTSEC0. On the LS1021A-TWR board, to signal this failure condition, the PHY driver keeps printing '803x_aneg_done: SGMII link is not ok'. Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match mdio1 device. Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-19ARM: dts: lpc32xx: use SPDX license identifierVladimir Zapolskiy1-7/+1
Replace GPLv2+ header with the SPDX identifier. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: dts: lpc32xx: add address and size cell values to SPI controller nodesVladimir Zapolskiy2-2/+8
All 4 SPI controllers on NXP LPC32xx SoC support SPI slaves discerning them by one cell address value, set it as default to avoid duplication in board device tree files. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: dts: lpc32xx: disable MAC controller by defaultVladimir Zapolskiy3-0/+3
NXP LPC3220 and LPC3230 SoCs do NOT contain a MAC controller, so, since for now there is just one dtsi file for all variants of NXP LPC32xx SoCs, it is reasonable to disable the controller by default and enable it in device tree files of particular boards. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: dts: lpc32xx: disable I2S controllers by defaultVladimir Zapolskiy1-0/+2
The I2S controllers found on NXP LPC32xx SoCs are not yet in use by any boards supported in upstream, disable the controllers by default. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-19ARM: dts: lpc32xx: change hexadecimal values to lower caseVladimir Zapolskiy1-9/+10
This is a non-functional change, all inconsistent hexadecimal values found in the file are now fixed. Taking a chance to interfere into some non-functional change I add my copyright notice for work done during the last few years. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-04-18ARM: dts: sun8i: a83t: Enable USB OTG controller on some boardsChen-Yu Tsai2-0/+24
The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-18ARM: dtsi: axp81x: add USB power supply nodeQuentin Schulz1-0/+4
The AXP813/818 has a VBUS power input. Add a device node for it, now that we support it. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> [wens@csie.org: Add commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-18ARM: tegra: Add ACTMON support on Tegra30Dmitry Osipenko1-0/+11
Add support for ACTMON on Tegra30. This is used to monitor activity from different components. Based on the collected statistics, the rate at which the external memory needs to be clocked can be derived. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: dts: Ux500: Add MCDE and Samsung displayLinus Walleij3-11/+65
This adds and updates the device tree nodes for the MCDE display controller and connects the Samsung display to the TVK1281618 user interface board (UIB) so we get nicely working graphics on this reference design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-17ARM: dts: ux500: Add Mali-400Linus Walleij1-0/+24
This adds the Mali-400 block, also known as SGA500 or the Smart Graphics Adapter, to the DBx500 DTS file. All resources and bindings are already in place so this just works. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-17ARM: dts: ape6evm: Reorder bootargsMagnus Damm1-1/+1
Reorder bootargs parameters to make the APE6EVM board bootargs match other boards from Renesas. No need to be special. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-17ARM: dts: marzen: Add rw to bootargs and use ip=dhcpMagnus Damm1-1/+1
Add rw as bootargs parameter and change from ip=on to ip=dhcp to make the Marzen board bootargs match other boards from Renesas. No need to be special. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-17ARM: dts: bockw: Reorder bootargsMagnus Damm1-1/+1
Reorder bootargs parameters to make the BockW board bootargs match other boards from Renesas. No need to be special. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-17ARM: dts: kzm9d: Add rw parameter to bootargsMagnus Damm1-1/+1
Add rw as bootargs parameter to make the KZM9D board bootargs match other boards from Renesas. No need to be special. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-17ARM: dts: sun8i: mapleboard: Remove cd-invertedMaxime Ripard1-2/+1
The cd-inverted property can also be expressed using the GPIO flags. Use the active low GPIO flag to have the same semantic without the confusion. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun5i: Reorder pinctrl nodesMaxime Ripard1-10/+10
We try to keep the PIO nodes ordered alphabetically, but this doesn't always work out. Let's fix it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun6i: i7: Remove useless propertyMaxime Ripard1-1/+0
The I7 DTS uses an spdif-out property with an "okay" value. However, that property isn't documented anywhere, and isn't used anywhere either. Remove it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO propertiesMaxime Ripard1-1/+1
While the USB PHY Device Tree mandates that the name of the ID detect pin should be usb0_id_det-gpios, a significant number of device tree use usb0_id_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Commit 2c515b0d05a9 ("ARM: sunxi: Fix the USB PHY ID detect GPIO properties") was supposed to fix this, but one fell through the cracks. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun4i: protab2: Remove stale pinctrl-names entryMaxime Ripard1-1/+0
Some nodes still have pinctrl-names entry, yet they don't have any pinctrl group anymore. Drop them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: tegra: venice2: Move PLL power supplies to XUSB pad controllerThierry Reding1-0/+5
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: nyan: Move PLL power supplies to XUSB pad controllerThierry Reding1-0/+5
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the XUSB controller to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 23:34:06 +0000