summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-06-14ARM: dts: at91: ksz9477_evb: fix port/phy validationOleksij Rempel1-0/+5
Latest drivers version requires phy-mode to be set. Otherwise we will use "NA" mode and the switch driver will invalidate this port mode. Fixes: 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds2-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-02Merge tag 'arm-late-5.19' of ↵Linus Torvalds32-86/+688
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ...
2022-05-30Merge tag 'socfpga_dts_updates_for_v5.19' of ↵Arnd Bergmann4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late SoCFPGA dts updates for v5.19 - dtschema fix SPI NOR node - correct dt-bindings doc for Altera gpio driver - add support for n6000 Agilex platform and dt-bindings documentation * tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: intel: add device tree for n6000 dt-bindings: intel: add binding for Intel n6000 dt-bindings: soc: add bindings for Intel HPS Copy Engine dt-bindings: gpio: altera: correct interrupt-cells ARM: dts: socfpga: align SPI NOR node name with dtschema Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-30Merge tag 'aspeed-5.19-devicetree' of ↵Arnd Bergmann9-55/+431
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late ASPEED device tree updates for 5.19 - New machine: * Nuvia's DC-SCM BMC - Enable AST2600 GFX, the BMC-driven graphics device - Add a bunch of devices for the AST2600 EVB - Updates to the AST2600 Bletchley machine - Backwards compatible changes to support the new spi-mem based SPI NOR driver * tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: ast2600-evb: Enable GFX device ARM: dts: aspeed: Add GFX node to AST2600 ARM: dts: aspeed: ast2600-evb: Enable virtual hub ARM: dts: aspeed: ast2600-evb: Enable video engine ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO ARM: dts: aspeed: Add Nuvia DC-SCM BMC ARM: dts: aspeed: bletchley: add sample averaging for ADM1278 ARM: dts: aspeed: bletchley: add eeprom node on each sled ARM: dts: aspeed: bletchley: add pca9536 node on each sled ARM: dts: aspeed: bletchley: update gpio0 line names ARM: dts: aspeed: bletchley: Enable mdio0 bus ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc ARM: dts: aspeed: bletchley: enable ehci0 device node ARM: dts: aspeed: Add USB2.0 device controller node ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes ARM: dts: aspeed: Enable Dual SPI RX transfers ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1 Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge tag 'v5.19-rockchip-dts32-2' of ↵Arnd Bergmann6-20/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late Amba and clock fixes to conform better to actual dt-bindings. * tag 'v5.19-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 Link: https://lore.kernel.org/r/4798587.jE0xQCEvom@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: dts: rockchip: add clocks property to cru node rk3228Johan Jonker1-0/+2
Add clocks and clock-names to the rk3228 cru node, because the device has to have at least one input clock. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: rockchip: add clocks property to cru node rk3036Johan Jonker1-0/+2
Add clocks and clock-names to the rk3036 cru node, because the device has to have at least one input clock. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220330114847.18633-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188Johan Jonker2-2/+4
Add clocks property to rk3066a/rk3188 cru node to fix warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220329111323.3569-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: rockchip: add clocks property to cru node rk3288Johan Jonker1-0/+2
Add clocks property to rk3288 cru node to fix warnings like: 'clocks' is a dependency of 'assigned-clocks'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220329113657.4567-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: rockchip: Remove "amba" bus nodes from rv1108Johan Jonker1-18/+11
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful purpose, and certainly bear no relation at all to the actual underlying interconnect topology. They appear to be cargo-cult copying from a design misstep in the very early days of FDT adoption on ARM, which was righted with the "arm,primecell" compatible, and the last trace of the idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus""). As such, they can simply be removed and the DMA-330 nodes fitted into the normal sort order. The node names should be generic, so rename it to "dma-controller". Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220330131608.30040-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: rockchip: add clocks property to cru node rv1108Johan Jonker1-0/+2
Add clocks and clock-names to the rv1108 cru node, because the device has to have at least one input clock. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220330131608.30040-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27ARM: dts: da850: use new 'dma-channels' propertyKrzysztof Kozlowski1-0/+2
The '#dma-channels' property was deprecated in favor of one defined by generic dma-common DT bindings. Add new property while keeping old one for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: dts: pxa: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski4-3/+14
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge tag 'at91-dt-5.19-2' of ↵Arnd Bergmann6-3/+58
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late AT91 DT #2 for 5.19: - at91: more DT compliance updates for RTC and RTT nodes - at91: sama7g5: add microphone support * tag 'at91-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: add node for PDMC0 ARM: dts: at91: sama7g5: add nodes for PDMC ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs ARM: dts: at91: Add the required 'atmel, rtt-rtc-time-reg' property Link: https://lore.kernel.org/r/20220517153252.92393-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge branch 'hpe/gxp-soc' into arm/lateArnd Bergmann3-0/+155
Patch series from Nick Hawkins: "The GXP is the HPE BMC SoC that is used in the majority of HPE current generation servers. Traditionally the asic will last multiple generations of server before being replaced. Info about SoC: HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC features at HPE. It supports ARMv7 architecture based on the Cortex A9 core. It is capable of using an AXI bus to which a memory controller is attached. It has multiple SPI interfaces to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple i2c engines to drive connectivity with a host infrastructure. The initial patches enable the watchdog and timer enabling the host to be able to boot." * hpe/gxp-soc: MAINTAINERS: Introduce HPE GXP Architecture ARM: dts: Introduce HPE GXP Device tree dt-bindings: arm: hpe: add GXP Support dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog clocksource/drivers/timer-gxp: Add HPE GXP Timer watchdog: hpe-wdt: Introduce HPE GXP Watchdog ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH ARM: hpe: Introduce the HPE GXP architecture Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-26Merge tag 'kbuild-v5.19' of ↵Linus Torvalds1-21/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config - Support W=e as a shorthand for KCFLAGS=-Werror - Fix CONFIG_IKHEADERS build to support toybox cpio - Add scripts/dummy-tools/pahole to ease distro packagers' life - Suppress false-positive warnings from checksyscalls.sh for W=2 build - Factor out the common code of arch/*/boot/install.sh into scripts/install.sh - Support 'kernel-install' tool in scripts/prune-kernel - Refactor module-versioning to link the symbol versions at the final link of vmlinux and modules - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in an arch-agnostic way - Refactor modpost, Makefiles * tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits) genksyms: adjust the output format to modpost kbuild: stop merging *.symversions kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS modpost: extract symbol versions from *.cmd files modpost: add sym_find_with_module() helper modpost: change the license of EXPORT_SYMBOL to bool type modpost: remove left-over cross_compile declaration kbuild: record symbol versions in *.cmd files kbuild: generate a list of objects in vmlinux modpost: move *.mod.c generation to write_mod_c_files() modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header scripts/prune-kernel: Use kernel-install if available kbuild: factor out the common installation code into scripts/install.sh modpost: split new_symbol() to symbol allocation and hash table addition modpost: make sym_add_exported() always allocate a new symbol modpost: make multiple export error modpost: dump Module.symvers in the same order of modules.order modpost: traverse the namespace_list in order modpost: use doubly linked list for dump_lists modpost: traverse unresolved symbols in order ...
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds2-0/+90
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-26Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds341-8413/+17779
Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ...
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-6/+18
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable GFX deviceJoel Stanley1-0/+12
Enable the GFX device with a framebuffer memory region. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-3-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add GFX node to AST2600Joel Stanley1-0/+11
The GFX device is present in the AST2600 SoC. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-2-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable virtual hubHoward Chiu1-0/+5
Enable Aspeed VHub for HID emulation Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23155E8A6193118544A7DBF3E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable video engineHoward Chiu1-0/+18
Enable video engine and reserve memory for it. Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23159B914BF7EF937FEDD2B5E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIOBrandon Wyman2-2/+2
The IBM Everest and Rainier systems have a GPIO line that goes to the power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync input history. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220421213638.1151193-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add Nuvia DC-SCM BMCGraeme Gregory2-0/+191
Add initial version of device tree for Nuvia DC-SCM BMC which is equipped with Aspeed AST2600 BMC SoC. Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add sample averaging for ADM1278Potin Lai1-0/+2
set number of sample averaging to 128 for both PWR_AVG and VI_AVG Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add eeprom node on each sledPotin Lai1-0/+30
Add eeprom (24c26) on each sled for storing sled fru information. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add pca9536 node on each sledPotin Lai1-0/+66
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41. P0: SLEDX_SWD_MUX P1: SLEDX_XRES_SWD_N P2: SLEDX_CLKREQ_N P3: SLEDX_PCIE_PWR_EN Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: update gpio0 line namesPotin Lai1-15/+27
Update GPIO line names based on DVT schematic Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: Enable mdio0 busPotin Lai1-0/+5
Enable mdio0 bus based on DVT schematic. TODO: Add Marvell 88E6191 Switch Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smcPotin Lai1-20/+13
Due to DVT schematic has stable spi signal, switch back to aspeed-smc driver for improving performance. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: enable ehci0 device nodePotin Lai1-0/+4
Enable ehci0 node for USB2 host feature Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add USB2.0 device controller nodeNeal Liu1-0/+10
Add USB2.0 device controller(udc) node to device tree for AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220518062043.1075360-3-neal_liu@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed-g4: Set spi-max-frequency for all flashesTao Ren1-0/+4
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC controller to ensure the clock frequency is calculated correctly. Suggested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Enable Dual SPI RX transfersCédric Le Goater3-0/+21
All these controllers support at least Dual SPI. Update the DTs. Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllersCédric Le Goater3-16/+8
This is compatible with the current driver and addresses issues when running 'make dt_binding_check'. Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1Howard Chiu1-2/+2
Since mac0/1 and mac2/3 are physically located on different die, they have different properties by nature, which is mac0/1 has smaller delay step. The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid' which enables the RX interface delay from the PHY chip. Refer page 45 of SDK User Guide v08.00 https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB") Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23152A548AAE81140B57DD69E6E09@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-18ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9Josua Mayer1-0/+10
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300, add an entry for it next to the original. As Russell King pointed out, additional phy nodes cause warnings like: mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing To avoid this the new node has its status set to disabled. U-Boot will be modified to enable the appropriate phy node after probing. The existing ar8035 nodes have to stay enabled by default to avoid breaking existing systems when they update Linux only. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18ARM: dts: Introduce HPE GXP Device treeNick Hawkins3-0/+155
The HPE SoC is new to linux. A basic device tree layout with minimum required for linux to boot including a timer and watchdog support has been created. The dts file is empty at this point but will be updated in subsequent updates as board specific features are enabled. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-05-17ARM: dts: at91: sama7g5ek: add node for PDMC0Codrin Ciubotariu1-1/+20
SAMA7G5-EK has 4 PDM microphones connected to PDMC0. PDMC0 pinmux is in conflict with gmac1, gmac1 being enabled by default. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/all/20220307122202.2251639-6-codrin.ciubotariu@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-17ARM: dts: at91: sama7g5: add nodes for PDMCCodrin Ciubotariu1-0/+24
Microchip's SAMA7G5 embeds two PDMCs. The PDMCs can be used to connect 2x4 PDM microphones. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/all/20220307122202.2251639-5-codrin.ciubotariu@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-17ARM: dts: at91: Use the generic "rtc" node name for the rtt IPsSergiu Moga2-2/+2
As the DT specification recommends, the node names should be of a generic nature. Thus, the most appropriate generic node name for the at91 rtt IPs is the "rtc" node name. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/all/20220304161159.147784-3-sergiu.moga@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-17ARM: dts: at91: Add the required 'atmel, rtt-rtc-time-reg' propertySergiu Moga3-0/+12
Add the required 'atmel,rtt-rtc-time-reg' property to the "rtt" nodes of the board files that were missing it. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/all/20220304161159.147784-2-sergiu.moga@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-13Merge tag 'v5.18-next-dts32' of ↵Arnd Bergmann2-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt Delete no longer needed properties of MediaTek Larbs for MT2701. * tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: Get rid of mediatek, larb for MM nodes Link: https://lore.kernel.org/r/b4383f23-0adc-b9de-a1d9-abd1c2f82b27@gmail.com This concludes a cleanup that was started back in 2019, with an incompatible DT binding change. Kernels before 5.18 can no longer use the updated dtb from 5.19, and the drivers no longer parse the old properties, which breaks compatibility with older dtb files. Link: https://lore.kernel.org/lkml/1546318276-18993-2-git-send-email-yong.wu@mediatek.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13Merge tag 'at91-dt-5.19' of ↵Arnd Bergmann15-15/+686
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 & LAN966 DT #1 for 5.19: - at91: DT compliance updates to gic and dataflash nodes - lan966: addition to many basic nodes for various peripherals - lan966: Kontron KSwitch D10: support for this new board and its network switch * tag 'at91-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash Link: https://lore.kernel.org/r/20220513162338.87717-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13Merge tag 'mvebu-dt-5.19-1' of ↵Arnd Bergmann1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.19 (part 1) Add the crypto module atsha204a node for the turis omnia (Armada 385 bases) * tag 'mvebu-dt-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: Add atsha204a node Link: https://lore.kernel.org/r/87lev5r2rg.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13ARM: dts: kswitch-d10: enable networkingMichael Walle3-0/+139
Enable all the necessary network related nodes, wire the pinctrl configurations, add the PHYs and connect them to the corresponding network ports. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220502224127.2604333-14-michael@walle.cc Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-13ARM: dts: lan966x: add switch nodeMichael Walle1-0/+62
Add the switch node and its 8 children ports. All are disabled by default. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220502224127.2604333-13-michael@walle.cc Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-13ARM: dts: lan966x: add serdes nodeMichael Walle1-0/+8
Add the SerDes node. On the LAN966x SoC these SerDes are used to connect network PHYs. By default, that node is disabled. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220502224127.2604333-12-michael@walle.cc Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 13:54:17 +0000