summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-12-09ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'imx-fixes-5.10-5' of ↵Arnd Bergmann2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 5: - Fix a regression on SoC revision detection with ANATOP, that is introduced by commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()"). - Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is used by camera sensor now. - Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM can be accessed. * tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann5-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor1-1/+3
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pinBernd Bauer1-1/+1
Use the correct pin for the i2c scl signal else we can't access the SoM eeprom. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com> [m.felsch@pengutronix.de: Adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrpFabio Estevam1-1/+0
Since commit 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") the PAD_GPIO_6 is used for providing the camera sensor clock. Remove it from the enetgrp to fix the following IOMXU conflict: [ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c [ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22 [ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl Fixes: 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-27Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'omap-for-v5.10/fixes-rc5-signed' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-24ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHYAdam Sampson1-2/+2
The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano are configured in hardware, using resistors that are populated to pull the RTL8211E's RXDLY/TXDLY pins low or high as needed. phy-mode should be set to rgmii-id to reflect this. Previously it was set to rgmii, which used to work but now results in the delays being disabled again as a result of the bugfix in commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix, Ethernet works unreliably on one board and doesn't work at all on the other. Fixes: 061035d456c9 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board") Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20201123174739.6809-1-ats@offog.org
2020-11-22Merge tag 'efi-urgent-for-v5.10-rc3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "Forwarded EFI fixes from Ard Biesheuvel: - fix memory leak in efivarfs driver - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in Thumb2 mode - avoid leaking EFI pgd pages on allocation failure" * tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Free efi_pgd with free_pages() efivarfs: fix memory leak in efivarfs_create() efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-20ARM: dts: sun8i: v3s: fix GIC node memory rangeIcenowy Zheng1-1/+1
Currently the GIC node in V3s DTSI follows some old DT examples, and being broken. This leads a warning at boot. Fix this. Fixes: f989086ccbc6 ("ARM: dts: sunxi: add dtsi file for V3s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201120050851.4123759-1-icenowy@aosc.io
2020-11-19ARM: dts: dra76x: m_can: fix order of clocksMarc Kleine-Budde1-2/+2
According to the bosch,m_can.yaml bindings the first clock shall be the "hclk", while the second clock "cclk". This patch fixes the order accordingly. Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16Merge tag 'imx-fixes-5.10-4' of ↵Arnd Bergmann3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of ↵Arnd Bergmann11-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'stm32-dt-for-v5.10-fixes-2' of ↵Arnd Bergmann3-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"Krzysztof Kozlowski1-1/+0
This reverts commit eaf2d2f6895d676dda6c95a652b58594f2887720. The commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'imx-fixes-5.10-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-11ARM: dts: am437x-l4: fix compatible for cpsw switch dt nodeGrygorii Strashko1-1/+1
Fix compatible the new CPSW switchdev DT node to avoid probing of legacy CPSW driver which fails: [ 2.781009] cpsw 4a100000.switch: invalid resource Fixes: 7bf8f37aea82 ("ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: imx50-evk: Fix the chip select 1 IOMUXFabio Estevam1-1/+1
The SPI chip selects are represented as: cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; , which means that they are used in GPIO function instead of native SPI mode. Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-09ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOMMarek Vasut1-0/+1
The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcorMarek Vasut1-0/+4
Enable STM32 Digital Thermal Sensor driver for stm32mp15xx-dhcor SoMs. Fixes: 94cafe1b6482 ("ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Define VIO regulator supply on DHCOMMarek Vasut1-0/+1
The VIO regulator is supplied by PMIC Buck3, describe this in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2Marek Vasut1-1/+1
On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT. Fixes: 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2Marek Vasut1-7/+10
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of the STM32MP15xx, however on the production SoM this was changed to pin PG0 to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared with the button, make the button polled. Fixes: 87cabf9405cb ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-02ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet nodePablo Greco1-1/+1
Ethernet PHY on BananaPi M2 Berry provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326769-39802-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulatorPablo Greco1-5/+5
DCDC1 regulator powers many different subsystems. While some of them can work at 3.0 V, some of them can not. For example, VCC-HDMI can only work between 3.24 V and 3.36 V. According to OS images provided by the board manufacturer this regulator should be set to 3.3 V. Set DCDC1 and DCDC1SW to 3.3 V in order to fix this. Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry") Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326755-39742-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHYPablo Greco1-1/+1
The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326600-39544-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: s3: pinecube: align compatible property to other S3 boardsMatteo Scordino1-1/+1
The compatible string in the Pine64 Pinecube dts diverges from the ones used in other S3 based boards, like the LicheePi and the Elimo Impetus and Initium. Discussion on LKML decided the PineCube should align to the others. Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201030234325.5865-7-matteo.scordino@gmail.com
2020-11-02ARM: dts: imx6q-prti6q: fix PHY addressOleksij Rempel1-2/+2
Due to bug in the bootloader, the PHY has floating address and may randomly change on each PHY reset. To avoid it, the updated bootloader with the following patch[0] should be used: | ARM: protonic: disable on-die termination to fix PHY bootstrapping | | If on-die termination is enabled, the RXC pin of iMX6 will be pulled | high. Since we already have an 10K pull-down on board, the RXC level on | PHY reset will be ~800mV, which is mostly interpreted as 1. On some | reboots we get 0 instead and kernel can't detect the PHY properly. | | Since the default 0x020e07ac value is 0, it is sufficient to remove this | entry from the affected imxcfg files. | | Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from | 4 to 0. With latest bootloader update, the PHY address will be fixed to "0". [0] https://git.pengutronix.de/cgit/barebox/commit/?id=93f7dcf631edfcda19e7757b28d66017ea274b81 Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-02ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clockingAndrew Lunn1-0/+3
The ZII devel B board has two generations of Marvell Switches. The mv88e6352 supports an MDIO clock of 12MHz. However the older 88e6185 does not like 12MHz, and often fails to probe. Reduce the clock speed to 5MHz, which seems to work reliably. Cc: Chris Healy <cphealy@gmail.com> Fixes: b955387667ec ("ARM: dts: ZII: update MDIO speed and preamble") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-02arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phySergey Matyukevich1-1/+1
Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") fixed micrel phy driver adding proper support for phy modes. Adapt imx6q-udoo board phy settings : explicitly set required delay configuration using "rgmii-id". Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo") Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-28Merge tag 'stm32-dt-for-v5.10-fixes-1' of ↵Arnd Bergmann2-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 1 Highlights: ----------- -On STM32MP157 DK & ED boards: Add Vin supply description to avoid random kernel crash due to vref_ddr regulator issue. * tag 'stm32-dt-for-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board Link: https://lore.kernel.org/r/4ac236b3-b980-f653-f644-53e586570724@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-28ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx boardPascal Paillet1-0/+15
Add description for Vin power supply and for peripherals that are supplied by Vin. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-10-28ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx boardPascal Paillet1-0/+17
Add description for Vin power supply and for peripherals that are supplied by Vin. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-10-26ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Bananapi M2+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-8-wens@kernel.org
2020-10-26ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai2-2/+2
The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC") Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@kernel.org
2020-10-26ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai2-2/+2
The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org
2020-10-26ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org
2020-10-26ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Bananapi M1+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@kernel.org
2020-10-26ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Cubietruck has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Emilio López <emilio@elopez.com.ar> Reviewed-by: Emilio López <emilio@elopez.com.ar> Link: https://lore.kernel.org/r/20201024162515.30032-3-wens@kernel.org
2020-10-26ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the A31 Hummingbird has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-2-wens@kernel.org
2020-10-26Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high"Chen-Yu Tsai1-5/+0
This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. Turns out the activity and link LEDs on the RJ45 port are active low, just like on the Orange Pi PC. Revert the commit that says otherwise. Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-1-wens@kernel.org
2020-10-26ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet nodeJernej Skrabec1-1/+1
Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201025081949.783443-1-jernej.skrabec@siol.net
2020-10-26ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"Lubomir Rintel1-2/+2
This makes validation happier. Link: https://lore.kernel.org/r/20200925234805.228251-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26ARM: dts: mmp3: Add power domain for the cameraLubomir Rintel1-0/+2
The camera interfaces on MMP3 are on a separate power island that needs to be turned on for them to operate and, ideally, turned off when the cameras are not in use. This hooks the power island with the camera interfaces in the device tree. Link: https://lore.kernel.org/r/20200925234805.228251-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26Merge tag 'sunxi-fixes-for-5.9-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for an unreasonable thermal trip point on the A10 * tag 'sunxi-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun4i-a10: fix cpu_alert temperature Link: https://lore.kernel.org/r/3c95a95f-c6fa-4b34-823b-ddaa7660d274.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYPArd Biesheuvel1-0/+3
Commit db227c19e68db353 ("ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully") updated the EFI entry code to permit firmware to invoke the EFI stub loader in HYP mode, with the MMU either enabled or disabled, neither of which is permitted by the EFI spec, but which does happen in the field. In the MMU on case, we remain in HYP mode as configured by the firmware, and rely on the fact that any HVC instruction issued in this mode will be dispatched via the SVC slot in the HYP vector table. However, this slot will point to a Thumb2 symbol if the kernel is built in Thumb2 mode, and so we have to configure HSCTLR to ensure that the exception handlers are invoked in Thumb2 mode as well. Fixes: db227c19e68db353 ("ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully") Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds405-2072/+8141
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds10-8/+29
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 03:21:06 +0000