summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21ARM: dts: qcom: msm8974-klte: Add USB nodeDaniele Debernardi1-0/+25
This introduces the usb node which can be used e.g. for USB_ETH Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Link: https://lore.kernel.org/r/20200411182122.2677248-6-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-21ARM: dts: qcom: msm8974-klte: Add sdhci1 nodeDaniele Debernardi1-0/+32
This introduces the eMMC sdhci node and its pinctrl state Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Link: https://lore.kernel.org/r/20200411182122.2677248-5-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-21ARM: dts: qcom: msm8974-klte: Add gpio-keys nodesDaniele Debernardi1-0/+49
This introduces the gpio-keys nodes for volume/home keys and the associated pinctrl state. Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Link: https://lore.kernel.org/r/20200411182122.2677248-4-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-21ARM: dts: qcom: msm8974-klte: Remove inherited vreg_boost nodeDaniele Debernardi1-2/+2
The Samsung klte does not have a vreg_boost node. vreg_boost also depends on pm8941-gpio which are not present on the klte. Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20200411182122.2677248-3-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-21ARM: dts: qcom: msm8974-klte: Add pma8084 regulator nodesDaniele Debernardi1-0/+184
The pma8084 replaces the pm8841,pm8941 found in other msm8974 devices. It is used for various things including gpio keys, sdhci, usb, dsi. The voltages are pulled from the vendor source tree. Signed-off-by: Daniele Debernardi <drebrez@gmail.com> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20200411182122.2677248-2-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13ARM: dts: qcom: ipq4019: fix high resolution timerAbhishek Sahu1-0/+1
Cherry-picked from CAF QSDK repo. Original commit message: The kernel is failing in switching the timer for high resolution mode and clock source operates in 10ms resolution. The always-on property needs to be given for timer device tree node to make clock source working in 1ns resolution. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Tested-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13ARM: dts: qcom: add scm definition to ipq806xAnsuel Smith1-0/+6
Add missing scm definition for ipq806x soc Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200319224424.18473-1-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-03Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds257-1734/+6376
Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...
2020-04-03Merge branch 'arm/late' into arm/dtArnd Bergmann18-430/+1205
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ...
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds3-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-03-31Merge tag 'tty-5.7-rc1' of ↵Linus Torvalds8-353/+353
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ...
2020-03-30Merge tag 'usb-5.7-rc1' of ↵Linus Torvalds4-0/+74
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here are the big set of USB and PHY driver patches for 5.7-rc1. Nothing huge here, some new PHY drivers, loads of USB gadget fixes and updates, xhci updates, usb-serial driver updates and new device ids, and other minor things. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits) USB: cdc-acm: restore capability check order usb: cdns3: make signed 1 bit bitfields unsigned usb: gadget: fsl: remove unused variable 'driver_desc' usb: gadget: f_fs: Fix use after free issue as part of queue failure usb: typec: Correct the documentation for typec_cable_put() USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback USB: serial: option: add Wistron Neweb D19Q1 USB: serial: option: add BroadMobi BM806U USB: serial: option: add support for ASKEY WWHC050 usb: core: Add ACPI support for USB interface devices driver core: platform: Reimplement devm_platform_ioremap_resource usb: dwc2: convert to devm_platform_get_and_ioremap_resource usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource drivers: provide devm_platform_get_and_ioremap_resource() phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 ...
2020-03-29ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmiiPhilippe Schenker1-1/+1
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY too, use rgmii-id. For the now used KSZ9031 nothing will change, as rgmii-id is only implemented and supported by the KSZ9131. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27ARM: dts: ux500: Fix missing node renamesLinus Walleij4-8/+8
I renamed the dsi-nodes from dsi@ to dsi-controller@ so that the schema check would kick in, but missed to rename it in a few places. Link: https://lore.kernel.org/r/20200326222536.86441-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of ↵Arnd Bergmann4-107/+321
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop remaining legacy platform data for cpsw and edma With a non-critical clock fix for dm814x ethernet, we can update ti81xx for cpsw ethernet and edma to probe them with ti-sysc interconnect target module driver and device tree data. And we can drop the related remaining platform data for cpsw and edma. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet Link: https://lore.kernel.org/r/pull-1584575307-189595@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of ↵Arnd Bergmann14-323/+884
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. * tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (56 commits) ARM: OMAP2+: Drop legacy platform data for dra7 edma ARM: OMAP2+: Drop legacy platform data for am3 and am4 edma ARM: dts: Configure interconnect target module for dra7 tptc1 ARM: dts: Configure interconnect target module for dra7 tptc0 ARM: dts: Configure interconnect target module for dra7 tpcc ARM: dts: Configure interconnect target module for am4 tptc2 ARM: dts: Configure interconnect target module for am4 tptc1 ARM: dts: Configure interconnect target module for am4 tptc0 ARM: dts: Configure interconnect target module for am4 tpcc ARM: dts: Configure interconnect target module for am3 tptc2 ARM: dts: Configure interconnect target module for am3 tptc1 ARM: dts: Configure interconnect target module for am3 tptc0 ARM: dts: Configure interconnect target module for am3 tpcc ARM: dts: dra7: Add PRU-ICSS interconnect target-module nodes ARM: dts: AM4372: Add the PRU-ICSS interconnect target-module node ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node ARM: OMAP2+: Drop legacy platform data for am437x DSS ARM: OMAP2+: Drop legacy platform data for dra7 DSS ARM: OMAP2+: Drop legacy platform data for omap5 DSS ARM: OMAP2+: Drop legacy platform data for omap4 dss ... Link: https://lore.kernel.org/r/pull-1583858385-416921@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26arm: dts: calxeda: Group port-phys and sgpio-gpio itemsAndre Przywara1-4/+5
For proper bindings checks we need to properly group the port-phys and sgpio-gpio items, so that they match the expected number of items. Link: https://lore.kernel.org/r/20200228135106.220620-5-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26arm: dts: calxeda: Fix interrupt groupingAndre Przywara3-5/+5
Currently multiple interrupts for some devices are written as one array instead of using the DT grouping notation (<0 42 4>, <0 23 4>). This ends up in the same binary representation in the .dtb, but is semantically not equivalent. The yaml schema checks will stumble over this, so lets fix that first. I refrained from using the symbolic names for GIC_SPI/GIC_PPI and IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the original DTS files and the mainline versions, so it's just additional churn. Link: https://lore.kernel.org/r/20200228135106.220620-4-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26arm: dts: calxeda: Provide UART clockAndre Przywara1-2/+2
The PL011 UART binding requires two clocks to be named in a node. Add the second clock, which is the bus gate, that just gets enabled. Since this is a fixed clock anyway, it doesn't make any difference. Link: https://lore.kernel.org/r/20200228135106.220620-3-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26arm: dts: calxeda: Basic DT file fixesAndre Przywara2-8/+3
The .dts files for the Calxeda machines are quite old, so carry some sloppy mistakes that the DT schema checker will complain about. Fix those issues, they should not have any effect on functionality. Link: https://lore.kernel.org/r/20200228135106.220620-2-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'qcom-dts-for-5.7' of ↵Arnd Bergmann10-0/+113
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.7 This adds Bluetooth support on Nexus 5, USB on Xperia Z1 and defines gpio-ranges throughout the various gpio-controllers. * tag 'qcom-dts-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add gpio-ranges property ARM: dts: qcom: msm8974-hammerhead: add support for bluetooth ARM: dts: qcom: msm8974: add blsp2_uart10 ARM: dts: qcom: msm8974-honami: Add USB node. Link: https://lore.kernel.org/r/20200318044305.GE470201@yoga Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'socfpga_dts_update_for_v5.7_part2' of ↵Arnd Bergmann1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7, part 2 - Add ptp_ref clock to ethernet nodes for Arria10 * tag 'socfpga_dts_update_for_v5.7_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes Link: https://lore.kernel.org/r/20200325160745.793-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'at91-5.7-dt' of ↵Arnd Bergmann12-18/+151
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.7 - Enable watchdog on sam9x60 - Correct sama5d4/2 RTC compatibles - Add i2c gpio pinctrl to allow i2c recovery * tag 'at91-5.7-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: at91: sama5d2: add i2c gpio pinctrl ARM: dts: at91: sama5d4: add i2c gpio pinctrl ARM: dts: at91: sama5d3: add i2c gpio pinctrl ARM: dts: at91: sama5d4: use correct rtc compatible ARM: dts: at91: sama5d2: use correct rtc compatible ARM: dts: at91: sam9x60ek: enable watchdog node ARM: dts: at91: sam9x60: add watchdog node ARM: dts: at91: Kill off "simple-panel" compatibles Link: https://lore.kernel.org/r/20200322085931.GA208770@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'gemini-dts-v5.7' of ↵Arnd Bergmann6-12/+58
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini DTS changes for v5.7: - Rename the IDE nodes to match the YAML schema - Add a temperature zone to the DIR-685, use hard drive as sensor and cool the case using the fan. * tag 'gemini-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes Link: https://lore.kernel.org/r/CACRpkdbvgqCVuoMCHJrCZ0J+3NrwdrBnwBz+BJrSE=hqYh2j+Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'v5.6-next-dts32' of ↵Arnd Bergmann3-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt - Rename scpsys nodes to power-controller. - Add PWM node to MT7629 SoC * tag 'v5.6-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: ARM: dts: mediatek: add mt7629 pwm support ARM: dts: mediatek: rename scpsys nodes to power-controller Link: https://lore.kernel.org/r/b454c6b2-656e-2261-7688-f7f2773189cf@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'socfpga_dts_update_for_v5.7' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.7 - Increase NAND boot partition for Arria10 - Increase QSPI partition for Stratix10 and Agilex * tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: increase the QSPI reg address for Stratix10 and Agilex ARM: dts: socfpga: arria10: Increase boot partition size for NAND Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-dt-5.7' of ↵Arnd Bergmann94-988/+2233
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm DTS changes for 5.7: - New support for i.MX6/7 based PICO devices and Toradex i.MX7 based Aster boards. - Add voltage monitor device node for vf610-zii boards. - Improve UART pins macro defines for i.MX6SX SoC and switch related boards to use the new names. - Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and IOMUXC in i.MX DTS files. - Switch imx6ul-pico device tree to DRM bindings. - Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards. - Add proper rgmii PHY description for imx6dl-riotboard and imx6q-marsboard. - Add capture-subsystem device support for i.MX51. - Kill off "simple-panel" compatibles which has never been an accepted as an upstream compatible string. - Random device addition to various boards. * tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits) ARM: dts: imx6q-marsboard: properly define rgmii PHY ARM: dts: imx6dl-riotboard: properly define rgmii PHY ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2 ARM: dts: imx6: RDU2: assign video PLL as input to LDB ARM: dts: vf: toradex: SPDX tags and copyright cleanup ARM: dts: imx7: toradex: use SPDX-License-Identifier ARM: dts: imx6: toradex: use SPDX-License-Identifier ARM: dts: imx51: add capture-subsystem device ARM: dts: imx: add nvmem property for cpu0 ARM: dts: imx6qdl: Add imx6qdl-pico support ARM: dts: imx6ul-pico: Add support for the dwarf baseboard ARM: dts: imx7d-pico: Add support for the nymph baseboard ARM: dts: imx7d-pico: Add support for the dwarf baseboard ARM: dts: imx23: introduce mmc0_sck_cfg ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 ARM: dts: imx: align name for crypto node and child nodes ARM: dts: imx6qdl-gw5910: add CC1352 UART ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe ARM: dts: imx6: phycore-som: add da9062 gpio support ARM: dts: imx6: phycore-som: explicit disable pmic watchdog during suspend ... Link: https://lore.kernel.org/r/20200318051918.32579-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'uniphier-dt-v5.7' of ↵Arnd Bergmann6-32/+180
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.7 - Rename nodes to avoid dt-schema warnings - Add a generic compatible to EEPROM so that it matches OF table - Add USB controller nodes to Pro5 SoC - Fix clock and reset of SPI nodes * tag 'uniphier-dt-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: Set SCSSI clock and reset IDs for each channel ARM: dts: uniphier: Add USB3 controller nodes for Pro5 ARM: dts: uniphier: Add one more generic compatible string for I2C EEPROM ARM: dts: uniphier: rename cache controller nodes to follow json-schema ARM: dts: uniphier: rename NAND node names to follow json-schema ARM: dts: uniphier: rename aidet node names to follow json-schema ARM: dts: uniphier: change SD/eMMC node names to follow json-schema Link: https://lore.kernel.org/r/CAK7LNAQ-AOTyqpV1E_S-hksjqexHfVauwGV9rrfDvjRVnu8-UQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'v5.7-rockchip-dts32-1' of ↵Arnd Bergmann15-79/+80
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Improvements for the rk3288-vyasa board and a lot of cleanups from verifying devicetrees against new yaml bindings. * tag 'v5.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits) ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodes ARM: dts: rockchip: swap clocks and clock-names values for i2s nodes ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes ARM: dts: rockchip: swap clocks and clock-names values for spdif nodes ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during reboot ARM: dts: rockchip: remove clock-frequency from saradc node rv1108 ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reload ARM: dts: rockchip: use DMA channels for UARTs for RK3288 ARM: dts: rockchip: rk3xxx: fix L2 cache-controller nodename ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc ARM: dts: add bus to rockchip amba nodenames ARM: dts: rockchip: remove #dma-cells from dma client nodes for rv1108 ARM: dts: rockchip: fix rockchip,default-sample-phase property names ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc dt-bindings: arm: add Rockchip rk3036-evb board dt-bindings: arm: fix Rockchip Kylin board bindings ARM: dts: rockchip: add missing model properties ARM: dts: rockchip: Add vcc50_hdmi for rk3288-vyasa ARM: dts: rockchip: Fix ddc-i2c-bus for rk3288-vyasa ... Link: https://lore.kernel.org/r/7846023.TtVhTo4ACP@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'samsung-dt-5.7' of ↵Arnd Bergmann9-7/+118
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.7 1. Various fixes: - Reboot of some Odroid Exynos4412-based boards, - MMC regulators on Arndale5250, - Memory mapping on Artik5, - GPU power domain on Exynos542x boards, - LCD SPI polarity on UniversalC210, 2. Add thermal cooling of GPU on Odroid XU3/XU4 family, 3. Add dynamic-power-coefficient to Exynos5422 for energy model. * tag 'samsung-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board ARM: dts: exynos: Fix G3D power domain supply on Arndale Octa boards ARM: dts: exynos: Fix G3D power domain supply on Odroid XU3/XU4/HC1 boards ARM: dts: exynos: Fix memory on Artik5 evaluation boards ARM: dts: exynos: Make fixed regulators always-on on Arndale5250 ARM: dts: exynos: Fix MMC regulator on Arndale5250 board ARM: dts: exynos: Add dynamic-power-coefficient to Exynos5422 CPUs ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1 ARM: dts: exynos: Fix broken reboot on some Odroid U2/X2/U3 boards Link: https://lore.kernel.org/r/20200316175652.5604-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'ux500-dts-v5.7' of ↵Arnd Bergmann5-6/+588
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.7 kernel: - Fix some DSI nodes - Add GT-S7710 DTS file * tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Add devicetree for Samsung GT-S7710 ARM: dts: ux500: Fix up DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm-dt' of ↵Arnd Bergmann15-21/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.7-rc1 Minor fixes and additions for 32-bit Tegra SoC device trees. * tag 'tegra-for-5.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Update sound node clocks in device tree ARM: tegra: Add clock-cells property to PMC ARM: tegra: Remove USB 2-0 port from Jetson TK1 padctl Link: https://lore.kernel.org/r/20200313165848.2915133-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'stm32-dt-for-v5.7-1' of ↵Arnd Bergmann11-27/+769
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- - Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. It is based on stm32mp157c SoC. - Add OTG full support on stm32mp15. - Fix issues seen during yaml validation on stpmic and stmfx. - Add i2c power/wakeup support on stm32mp15. - Add card detect on sdcard on stm32mp boards * tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits) ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 ARM: dts: stm32: add USB OTG full support on stm32mp151 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board ... Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm-dt-for-v5.7-tag2' of ↵Arnd Bergmann2-0/+99
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 (take two) - LCD/touchscreen support for the iwg22d-sodimm board. * tag 'renesas-arm-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg22d-sodimm: Enable touchscreen ARM: dts: iwg22d-sodimm: Enable LCD panel Link: https://lore.kernel.org/r/20200313154304.1636-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-dt-for-5.7' of ↵Arnd Bergmann14-35/+464
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards * tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits) arm64: dts: allwinner: a64: add node for rotation core ARM: dts: sun8i: a83t: Add device node for rotation core arm64: dts: allwinner: a64: Fix display clock register range ARM: dts: sunxi: Fix DE2 clocks register range arm64: dts: allwinner: h6: orangepi: Enable HDMI arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet arm64: dts: allwinner: h6: Move ext. oscillator to board DTs arm64: dts: allwinner: Add initial support for Pine64 PinePhone dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings arm64: dts: sun50i-a64: Add i2c2 pins ARM: dts: sunxi: h3/h5: add r_pwm node arm64: allwinner: a64: enable LCD-related hardware for Pinebook ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps ARM: dts: sun8i-h3: Add thermal trip points/cooling maps arm64: dts: allwinner: h6: Fix PMU compatible arm64: dts: allwinner: h5: Fix PMU compatible ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator ARM: dts: sun5i: Add PocketBook Touch Lux 3 support dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3 ... Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.7/devicetree' of ↵Arnd Bergmann2-5/+94
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.7, please pull the following: - Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS - Nicolas moves the eMMC2 controller into its separate node in order for platform firmware to perform the necessary "dma-ranges" property patching based on the chip revision since the eMMC controller has different addressing constraints. - Florian convers a whole bunch of Broadcom boards bindings from text to YAML. * tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert Cygnus to YAML ARM: dts: bcm2711: Move emmc2 into its own bus ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/dt-signed' of ↵Arnd Bergmann3-2/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.7 merge window Few device tree changes for omaps for v5.7 to configure omap5 AESS module and to add idle_states for am335x and am437x cpuidle. * tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Add idle_states for cpuidle ARM: dts: am33xx: Add idle_states for cpuidle ARM: dts: Configure omap5 AESS Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'versatile-dts-v5.7-1' of ↵Arnd Bergmann9-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.7 series take one: - Schema validation for the top level of all ARM reference designs: Integrator, Versatile, RealView, Juno. - Clean up some node names in the trees so they pass validation fine. - Drop the old text bindings. - A top level DMA ranges patch from Rob. * tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/arm64: dts: Rename SMB bus to just bus dt-bindings: arm: Drop the non-YAML bindings dt-bindings: arm: Add Versatile Express and Juno YAML schema dt-bindings: arm: Add RealView YAML schema dt-bindings: arm: Add Versatile YAML schema dt-bindings: arm: Add Integrator YAML schema ARM: dts: RealView: Fix the name of the SoC node ARM: dts: Versatile: Use syscon as node name for IB2 ARM: dts: integratorap: Remove top level dma-ranges Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'renesas-arm-dt-for-v5.7-tag1' of ↵Arnd Bergmann20-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.7 - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: rzg1: Add reset control properties for display ARM: dts: rcar-gen2: Add reset control properties for display ARM: dts: r8a7745: Convert to new DU DT bindings ARM: dts: r7s72100: Add SPIBSC clocks ARM: dts: renesas: Group tuples in operating-points properties ARM: dts: renesas: Add missing ethernet PHY reset GPIO on Gen2 reference boards Link: https://lore.kernel.org/r/20200226110221.19288-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of ↵Arnd Bergmann2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes - interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of ↵Arnd Bergmann2-0/+2
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann7-23/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25ARM: dts: exynos: Fix regulator node aliasing on Midas-based boardsMarek Szyprowski2-3/+3
Commit d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") added a new fixed regulator ("voltage-regulator-6") to base "midas" .dtsi, but it didn't update the clients of that .dtsi, which define their own fixed regulators starting from the "voltage-regulator-6". This results in aliasing of the regulator dt nodes and breaks operation of OLED panel due to lack of power supply. Fix this by increasing the numbers in the fixed regulator names for those boards. Link: https://lore.kernel.org/r/20200316173710.3144-1-krzk@kernel.org Fixes: d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-fixes-5.6-2' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6, round 2: - Fix minimum voltage setting of vdd_arm and vdd_soc on i.MX6 phycore-som board. * tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Link: https://lore.kernel.org/r/20200316032555.GD17221@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-fixes-for-5.6-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/20200313060727.GA23962@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann3-69/+69
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-24ARM: dts: tango4: Make /serial compatible with ns16550aLubomir Rintel1-1/+1
ralink,rt2880-uart is compatible with ns16550a and all other instances of RT2880 UART nodes include it in the compatible property. Add it also here, to make the binding schema simpler. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20200320174107.29406-8-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp*: Make the serial ports compatible with xscale-uartLubomir Rintel2-8/+8
XScale serial port driver is perfectly capable of supporting this hardware. A separate compatible string is probably a historical mess. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-7-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp*: Fix serial port namesLubomir Rintel2-8/+8
A preferred node name for serial ports is "serial": mmp2-olpc-xo-1-75.dt.yaml: uart@d4030000: $nodename:0: 'uart@d4030000' does not match '^serial(@[0-9a-f,]+)*$' ... Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-6-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-10 20:49:53 +0000