summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2018-12-11Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dtOlof Johansson12-24/+1027
This device-tree pxa update brings : - various fixes from Daniel (W=12 issues mainly) - support for the first pxa3xx devicetree pxa board * tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux: ARM: dts: pxa3xx: Add Raumfeld DTS files ARM: dts: pxa: clean up USB controller nodes ARM: dts: pxa3xx: clean up pxa3xx clock controller node name ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus ARM: dts: pxa2xx: fix hwuart memory range ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus ARM: dts: pxa3xx: add gcu node Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-11ARM: dts: Add missing ranges for dra7 mcasp l3 portsTony Lindgren1-26/+66
We need to add mcasp l3 port ranges for mcasp to use a correct l3 data port address for dma. And we're also missing the optional clocks that we have tagged with HWMOD_OPT_CLKS_NEEDED in omap_hwmod_7xx_data.c. Note that for reading the module revision register HWMOD_OPT_CLKS_NEEDED do not seem to be needed. So they could be probably directly managed only by the mcasp driver, and then we could leave them out for the interconnect target module. Fixes: 4ed0dfe3cf39 ("ARM: dts: dra7: Move l4 child devices to probe them with ti-sysc") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-11ARM: dts: Fix ranges for am335x epwmssTony Lindgren5-25/+19
Looks like I missed the ranges for am335x epwmss. Let's set it up the same way as for am437x and dra7. Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-11ARM: dts: uniphier: add MIO DMAC nodesMasahiro Yamada3-0/+44
Add MIO-DMAC (Media IO DMA Controller) nodes, and use them as the DMA engine of SD/eMMC controllers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-10ARM: dts: Fix hsi gdd range for omap4Tony Lindgren1-2/+2
While reviewing the missing mcasp ranges I noticed omap4 hsi range for gdd is wrong so let's fix it. I'm not aware of any omap4 devices in mainline kernel though that use hsi though. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-10ARM: dts: imx: add imx7ulp evk supportA.s. Dong2-0/+79
The NXP i.MX 7ULP Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MX 7ULP, which features NXP's advanced implementation of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D Graphics Processing Units (GPUs). The EVK enables HDMI output for simple out-of-the-box to bring up but allows reconfiguration for MIPI displays. The EVK is designed as a System-On-Module(SOM) board that connects to an associated baseboard. The SOM provides 1 GB LPDDR3, 8 MB Quad SPI flash, Micro SD 3.0 card socket, WiFi/ Bluetooth capability, USB 2.0 OTG with Type C connector and an NXP PF1550 power management IC (PMIC). The baseboard provides additional capabilities including a full SD/MMC 3.0 card socket, audio codec, multiple sensors, an HDMI connector, and an alternate MIPI display connector. Additionally, the EVK facilitates software development with the ultimate goal of faster time to market through the support of both Linux OS and AndroidTM rich operating systems, as well as FreeRTOS. This patch aims to support the preliminary booting up features as follows: GPIO LPUART FEC SD/MMC See more board details: https://www.nxp.com/products/processors-and-microcontrollers/ arm-based-processors-and-mcus/i.mx-applications-processors/ i.mx-7-processors/evaluation-kit-for-the-i.mx-7ulp-applications -processor:MCIMX7ULP-EVK Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx: add common imx7ulp dtsi supportA.s. Dong1-0/+346
The i.MX 7ULP family of processors features NXP's advanced implementation of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D Graphics Processing Units (GPUs). This patch aims to add the initial support including: 1) CLK 2) GPIO PTC, PTD, PTE, PTF 3) uSDHC 1/2 4) LPUART 4/5/6/7 5) LPI2C 6/7 Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variantFabio Estevam2-0/+106
The imx7d-pico-hobbit contains a imx7d-pico SoM and a hobbit baseboard. Add support for it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico-pi: Extend peripherals supportFabio Estevam1-0/+56
This adds following peripherals for the imx7d-pico-pi as: - LED - Touchscreen - GPIO Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Extend peripherals supportFabio Estevam1-0/+183
This extends the peripherals supported by the imx7d-pico.dtsi. It adds: - I2C2 - Flexcan (flexcan1 and flexcan2 ports) - USDHC1 - UART (6 and 7 ports) - PWM (4 ports) - eCSPI3 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Improve WiFi regulator nameOtavio Salvador1-5/+5
There are different models of WiFi being used in the SoM and the handle name was too restrictive. This reworks it to a more generic and meaningful name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIOFabio Estevam1-0/+2
Pass the "phy-reset-gpios" property in order to describe the GPIO that performs the Ethernet PHY reset. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrlFabio Estevam1-0/+2
Pass the USBOTG1_PWR pinctrl description in the USBOTG GPIO controlled regulator. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsiFabio Estevam2-114/+113
imx7d-pico-pi board contains: - One SoM board (imx7d pico) - One base board (pi). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx7d-pico.dtsi file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Switch to SPDX identifierFabio Estevam2-82/+6
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Do not harcode the memory sizeFabio Estevam1-1/+2
Currently the memory size described in dts is 2GB, which is incorrect. There are 512MB and 1GB versions of imx7d-pico boards, so remove the hardcoded memory size and let the bootloader pass the correct value to the kernel. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10Merge tag 'imx-fixes-4.20-3' into imx7d/picoShawn Guo7-14/+38
i.MX fixes for 4.20, round 3: - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct the description of the Wifi clock. - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that different boards can be covered. This fixes the ARM LDO failure seen on some customer boards.
2018-12-10ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1Andrey Smirnov1-4/+13
TPA6130A2 SD pin on RDU1 is not really controlled by SoC and instead is only meant to notify the system that audio was "muted" by external actors. To accommodate that, drop "power-gpio" property of hpa1 node as well as specify a name for that GPIO so that userspace can access it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Remove extra space between node name and braceLeonard Crestez1-1/+1
Fixes: 7d1cd2978664 ("ARM: dts: imx6ul: add gpmi support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulatorsFabio Estevam1-4/+4
Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled regulator improves the readability, so use it instead of the hardcoded number. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: add flexcan supportDong Aisheng3-2/+55
Add flexcan support for i.MX6UL board. Change the place of CAN node delete due to i.MX6ULZ include i.MX6UL dts but not support flexcan. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx5: add gpu nodesJonathan Marek2-0/+20
This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now supported by the freedreno driver. The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm driver to identify the smaller 128KiB GMEM size. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add accelerometer sensor supportAnson Huang1-0/+15
Add accelerometer sensor mma8451 support on i2c1 bus. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add magnetometer sensor supportAnson Huang1-0/+15
Add magnetometer sensor mag3110 support on i2c3 bus. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add light sensor supportAnson Huang1-0/+33
Add isl29023 light sensor support on i2c3 bus, the light sensor's power is controlled by a fixed regulator, since the isl29023 driver and most of other sensors on same board like mag3110 and mma8451 do NOT support regulator operation currently, they are all controlled by this regulator, so this patch also adds the fixed regulator support and make it always on. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"Fabio Estevam1-46/+36
It is not recommended to place regulators inside "simple-bus", so move them out to make it cleaner the addition of new regulators. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi73-2/+72
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6dl-mamoj: Add a memory nodeFabio Estevam1-0/+6
Add a memory node, with an empty memory size, which will be filled by the bootloader. This is done in preparation for removing the memory node from imx6qdl.dtsi. Reported-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx53-voipac-dmm-668: Fix memory node duplicationFabio Estevam1-6/+2
imx53-voipac-dmm-668 has two memory nodes, but the correct representation would be to use a single one with two reg entries - one for each RAM chip select, so fix it accordingly. Reported-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: vf610-zii-scu4-aib: Add HI8435 supportFabio Estevam1-0/+14
On the vf610-zii-scu4-aib board there is a hi8435 (32-channel discrete-to-digital SPI sensor device) in the DSPI0 bus. Add support for it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 busAnson Huang1-0/+16
Add egalax touch screen support on i2c2 bus, it is connected to LVDS0, while the existing one on i2c3 bus is connected to LVDS1. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7s: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variantFabio Estevam3-32/+98
The imx6ul-pico-pi contains a imx6ul-pico SoM and a pi baseboard: https://www.technexion.com/products/pico-baseboards/detail/PICO-PI Add support for it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Extend peripherals supportFabio Estevam1-0/+30
This adds following peripherals support: - ADC - GPIO LED - GPIOs Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Make the child led nodes standardFabio Estevam1-2/+2
Use the same child led node and label name as used in the imx7d-pico-hobbit board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Move SoM related part to imx6ul-pico.dtsiFabio Estevam2-461/+511
imx6ul-pico-hobbit board contains: - One SoM board (imx6ul pico) - One base board (hobbit). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx6ul-pico.dtsi file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Switch to SPDX identifierFabio Estevam1-45/+7
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ls1021a: add qdma device tree nodesPeng Ma1-0/+20
add the qDMA device tree nodes for LS1021A devices. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: vf: Fix memory node duplicationFabio Estevam11-2/+9
Boards based on vf500/vf600 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the vf500.dtsi/vf610m4.dtsi files. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7: Correct mask for GIC PPI interruptsFabio Estevam2-5/+26
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX7S contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Likewise, i.MX7D contains two Cortex-A7 cores, so it should use "GIC_CPU_MASK_SIMPLE(2)" instead. Tested on a imx7s-warp. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Correct mask for GIC PPI interruptsFabio Estevam1-5/+5
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Tested on a imx6ul-evk. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx53: Switch to SPDX identifierFabio Estevam1-11/+4
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx50: Switch to SPDX identifierFabio Estevam1-12/+5
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabreauto: add flexcan supportAisheng Dong1-0/+47
The flexcan1 is pin conflict with fec. User would make flexcan1 enabled with fec disabled to use CAN. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx-sabreauto: add flexcan supportAisheng Dong1-0/+57
The CAN transceiver on MX6SX Sabreauto board seems in sleep mode by default after power up the board. User has to press the wakeup key on ARD baseboard before using the transceiver, or it may not work properly when power up the board at the first time(warm reset does not have such issue). This patch operates the wake pin too besides stby/en pins by chaining them together in regulator mode. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx-sdb: add flexcan supportAisheng Dong3-0/+59
CAN transceiver is different on RevA and RevB board. It's active high on RevA while active low on Rev B. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ls1021a: add nodes for PWMsPatrick Havelange1-0/+96
The LS1021A has 8 possible PWMs, so adding them (disabled by default) Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:41:56 +0000