summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-2/+41
Pull ARM SoC bug fixes from Arnd Bergmann: "Things are calming down for arm-soc as well. This set of bug fixes is dominated in size by the at91 platform bug fixes. Some of them were meant to go through the framebuffer tree during the merge window, but since the framebuffer maintainer could not be reached, I offered to take them here. The other notable at91 change is the addition of pinctrl definitions to fix the NAND controller. The rest are mostly simple regression fixes: - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's renaming of the Kconfig symbol. You will get a trivial merge conflict here, we still want to remove it. - missing bits for clocks on imx and s5pv210 - missing header inclusions in mmp and shmobile - typos in s5pv210 camera and vt8500 clock support code and three trivial fixes for pre-3.8 bugs: - an old bogus build warning in the joystick driver - a misleading Kconfig description - a NULL pointer check on davinci" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: fix CONFIG_VIRT_TO_BUS handling ARM: i.MX35: enable MAX clock ARM: Scorpion is a v7 architecture, not v6 ARM: mmp: add platform_device head file in gplugd input/joystick: use get_cycles on ARM [media] s5p-fimc: fix s5pv210 build clk: vt8500: Fix "fix device clock divisor calculations" ARM: i.MX25: Fix DT compilation ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: fix LCD-wiring mode atmel_lcdfb: fix 16-bpp modes on older SOCs ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 ARM: shmobile: marzen: Include mmc/host.h ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries
2013-03-15Merge tag 'mfd-fixes-3.9-1' of ↵Linus Torvalds4-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.9. With this one we have: - An ab8500 build failure fix. - An ab8500 device tree parsing fix. - A fix for twl4030_madc remove routine to work properly (when built-in). - A fix for properly registering palmas interrupt handler. - A fix for omap-usb init routine to actually write into the hostconfig register. - A couple of warning fixes for ab8500-gpadc and tps65912" * tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: twl4030-madc: Remove __exit_p annotation mfd: ab8500: Kill "reg" property from binding mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO mfd: wm831x: Don't forward declare enum wm831x_auxadc mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource() mfd: tps65912: Declare and use tps65912_irq_exit() mfd: palmas: Provide irq flags through DT/platform data mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error mfd: omap-usb-host: Actually update hostconfig
2013-03-14Merge branch 'v3.9-samsung-fixes-1' of ↵Arnd Bergmann2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: * 'v3.9-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann1-2/+26
From Nicolas Ferre <nicolas.ferre@atmel.com>: Two patches for Device Tree on at91sam9x5/NAND. Two more for fixing PM suspend/resume IRQ on AIC5 and GPIO used with pinctrl. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments Includes an update to -rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-13ARM: at91: dt: at91sam9x5: complete NAND pinctrlRichard Genoud1-2/+26
There was only chip enable and readdy/busy pins for the nand controller. This add the rest of the pins. pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-13ARM: at91: dt: at91sam9x5: correct NAND pins commentsRichard Genoud1-2/+2
Comments on NAND pins where inverted. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-12mfd: ab8500: Kill "reg" property from bindingArnd Bergmann4-5/+4
The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-11Arm: socfpga: pl330: Add #dma-cells for generic dma binding supportPadmavathi Venna1-0/+3
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11Merge tag 'mvebu_fixes_for_v3.9' of ↵Arnd Bergmann22-26/+21
git://git.infradead.org/users/jcooper/linux into fixes mvebu fixes for v3.9 from Jason Cooper <jason@lakedaemon.net>: The first four patches: 89c58c1 rtc: rtc-mv: Add support for clk to avoid lockups de88747 gpio: mvebu: Add clk support to prevent lockup 7bf5b40 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels 93fff4c ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency are Cc'd to stable since they were held over from the previous merge window. The rest are a small collection of fixes and a couple of devicetree conversion catchups. * tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux: arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-08arm: mach-orion5x: fix typo in compatible string of a .dts fileThomas Petazzoni1-1/+1
The orion5x-lacie-ethernet-disk-mini-v2.dts file was using "marvell-orion5x-88f5182" as a compatible string, while it should have been "marvell,orion5x-88f5182". Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08arm: mvebu: fix address-cells in mpic DT nodeThomas Petazzoni1-1/+0
There is no need to have a #address-cells property in the MPIC Device Tree node, and more than that, having it confuses the of_irq_map_raw() logic, which will be used by the Marvell PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08arm: mvebu: Reduce reg-io-width with UARTsHeikki Krogerus2-4/+4
Setting the reg-io-width to 1 byte represents more accurate description of the HW. This will fix an issue where UART driver causes kernel panic during bootup. Gregory CLEMENT traced the issue to autoconfig() in 8250.c, where the existence of FIFO is checked from UART_IIR register. The register is now read as 32-bit value as the reg-io-width is set to 4-bytes. The retuned value seems to contain bogus data for bits 31:8, causing the issue. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08ARM: Dove: add RTC device nodeJean-Francois Moine1-0/+5
The commit: 48be9ac ARM: Dove: split legacy and DT setup removed the RTC initialization. This patch re-enables the RTC via the DT. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08arm: mvebu: enable the USB ports on Armada 370 Reference Design boardFlorian Fainelli1-0/+8
This patch modifies the Armada 370 Reference Design DTS file to enable support for the two USB ports found on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08rtc: rtc-mv: Add support for clk to avoid lockupsAndrew Lunn1-0/+1
The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08gpio: mvebu: Add clk support to prevent lockupAndrew Lunn1-0/+2
The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper17-20/+0
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-07ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330Padmavathi Venna2-0/+15
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on samsung exynos platforms. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-04Merge tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-2/+1
into fixes From Shawn Guo: The imx fixes for 3.9: - move early resume code out of .data section to fix allyesconfig failure since c08e20d (arm: Add v7_invalidate_l1 to cache-v7.S) gets merged - Fix incorrect DISP1_DAT_21 number in imx53-mba53 disp1-grp1 * tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1 ARM: mach-imx: move early resume code out of the .data section Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04ARM: Tegra: Add clock entry for smp_twd clockPrashant Gaikwad2-0/+2
As DT support for clocks and smp_twd is enabled, add clock entry for smp_twd clock to DT. This fixes the following error while booting the kernel: smp_twd: clock not found -2 Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: include kernel log spew that this fixes] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04ARM: bcm2835: fix I2C module clock rateStephen Warren1-1/+1
BCM2835-ARM-Peripherals.pdf states that the I2C module's input clock is nominally 150MHz, and that value is currently reflected in bcm2835.dtsi. However, practical measurements show that the rate is actually 250MHz, and this agrees with various downstream kernels. Switch the I2C clock's frequency to 250MHz so that the generated bus clock rate is accurate. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1Shawn Guo1-2/+1
According to fsl,imx53-pinctrl.txt, the pin number of DISP1_DAT_21 should be 545, while 543 is IPU_CSI0_D_3. Along with the change, one duplication of DISP1_DAT_0 in disp1-grp1 is removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-28Merge tag 'late-mvebu-rebased' of ↵Linus Torvalds24-10/+922
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC mvebu platform changes from Olof Johansson: "This series contains changes for the Marvell EBU platforms (mvebu, orion, kirkwood, dove) that were not part of the first set of pull requests because of dependencies on the MMC tree, and being submitted a little late. Notable changes are: - More devices get moved out of board files into device tree descriptions. The remaining devices listed in there have patches that will get sent for 3.10, after which we can remove a lot of the board files entirely. We are doing the pinctrl and mmc drivers here, ethernet and PCI still remain. - SMP support for mvebu is improved with support for the local interrupt controller. - The Guruplug board file gets replaced with a DT description. Unfortunately, the dependency on the MMC tree turned out to be a much larger problem than expected, when the MMC maintainer rebased the patches in his tree that all of the patches in this branch are based on, which caused merge conflicts between the new and old versions of those patches. To work around the merge conflicts, this branch rebases all patches on top of the respective MMC patches that did get merged into 3.9. The patches are all identical to the versions that were part of linux-next, but have a new commit date." * tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits) arm: mvebu: enable the SD card slot on Armada 370 Reference Design board ARM: kirkwood: topkick: init mvsdio via DT ARM: kirkwood: nsa310: convert to pinctrl ARM: Kirkwood: topkick: Enable i2c bus. ARM: kirkwood: topkick: convert to pinctrl ARM: dove: convert serial DT nodes to clocks property arm: mvebu: Add SPI flash on Armada 370 DB board arm: mvebu: Add SPI flash on Armada XP-DB board arm: mvebu: Add SPI flash on Armada XP-GP board arm: mvebu: Add support for SPI controller in Armada 370/XP clocksource: update and move armada-370-xp-timer documentation to timer directory arm: mvebu: update DT to support local timers ARM: Dove: convert usb host controller to DT arm: mvebu: Enable USB controllers on Armada 370/XP boards arm: mvebu: Add support for USB host controllers in Armada 370/XP arm: mvebu: add button for OpenBlocks AX3-4 ARM: Kirkwood: Convert NS2 to gpio-poweroff. ARM: Kirkwood: Convert NSA310 I2C to device tree ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver ARM: Kirkwood: Convert NSA310 to DT based regulators. ...
2013-02-28Merge tag 'late-omap' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late OMAP changes from Olof Johansson: "This branch contains changes for OMAP that came in late during the release staging, close to when the merge window opened. It contains, among other things: - OMAP PM fixes and some patches for audio device integration - OMAP clock fixes related to common clock conversion - A set of patches cleaning up WFI entry and blocking. - A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc) - A set of smaller fixes and cleanups around AM33xx restart and revision detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)" * tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: omap2: include linux/errno.h in hwmod_reset ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default ARM: OMAP4: hwmod data: Enable AESS hwmod device ARM: OMAP4: hwmod data: Update AESS data with memory bank area ARM: OMAP4+: AESS: enable internal auto-gating during initial setup ASoC: TI AESS: add autogating-enable function, callable from architecture code ARM: OMAP2+: hwmod: add enable_preprogram hook ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init() ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 ARM: OMAP2+: AM33XX: Update the hardreset API ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files ...
2013-02-28Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds24-1878/+2426
Pull ARM SoC i.MX DT changes from Olof Johansson: "This branch contains of devicetree changes for the Freescale i.MX platform. The base patch of the branch changes the format of the dts files to a slightly different format that makes it easier to do derivative board definitions, but it also introduces a lot of churn in the process since every line of the file is touched. On top of that are a handful of the regular changes; enabling more boards as DT-based instead of legacy board files (mx25pdk), enabling another driver for devicetree and thus adding bindings (onewire), etc. I'm not happy about the churn, and will likely not take it for other platforms in the future." * tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: dts: add dtsi for imx6q and imx6dl ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi ARM: dts: i.MX6: Add regulator delay support ARM: dts: Add device tree entry for onewire master on i.MX53 ARM: i.MX53: Add clocks for i.mx53 onewire master. W1: Add device tree support to MXC onewire master. ARM: imx: enable imx6q-cpufreq support ARM: dts: Add apf51 basic support ARM i.MX6: change mxs usbphy clock usage ARM: dts: imx6q: Remove silicon version from SDMA firmware ARM i.MX53: dts: add oftree for MBa53 baseboard ARM i.MX53: add dts for the TQ tqma53 module ARM: dts: imx53: pinctrl update ARM i.MX51 babbage: Add keypad support ARM: dts: imx: Add imx51 KPP entry ARM: dts: imx25-karo-tx25: Put status entry in the end ARM: mx25pdk: Add device tree support ARM: dts: imx: use nodes label in board dts ARM: dts: add missing imx dtb targets ARM: boot: dts: Add an entry for imx27-pdk.dtb ...
2013-02-28arm: mvebu: enable the SD card slot on Armada 370 Reference Design boardFlorian Fainelli1-0/+7
The Armada 370 Reference Design board has one SD card slot, directly connected to the SDIO IP of the SoC, so we enable this IP. there are no GPIOs for card-detect and write-protect so we do not specify any. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: kirkwood: topkick: init mvsdio via DTJason Cooper1-0/+7
Signed-off-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch>
2013-02-28ARM: kirkwood: nsa310: convert to pinctrlJason Cooper1-0/+99
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: topkick: Enable i2c bus.Andrew Lunn1-1/+6
Add a DT node for I2C and pinctrl hog for the pins. There appears to be an i2c bus on topkick with a device on it: i2cdetect 0 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0. I will probe address range 0x03-0x77. Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: kirkwood: topkick: convert to pinctrlJason Cooper1-0/+90
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: dove: convert serial DT nodes to clocks propertySebastian Hesselbarth1-4/+4
of_serial now has support for using clocks property and we have a DT clock provider. This patch replaces the hard coded clock-frequency property with a clocks phandle to tclk. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add SPI flash on Armada 370 DB boardGregory CLEMENT1-0/+12
This patch add support for the SPI flash MX25l25635E which is present on the Armada 370 DB board. This flash stores the bootloader and its environment. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add SPI flash on Armada XP-DB boardGregory CLEMENT1-0/+12
This patch add support for the SPI flash M25P64 which is present on the Armada XP DB board. This flash stores the bootloader and its environment. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add SPI flash on Armada XP-GP boardEzequiel Garcia1-0/+12
This patch adds an SPI master device node for Armada XP-GP board. This master node is an SPI flash controller 'n25q128a13'. Since there is no 'partitions' node declared, one full sized partition named as the device will be created. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Tested-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add support for SPI controller in Armada 370/XPEzequiel Garcia1-0/+21
The Armada 370 and Armada XP SoC has an SPI controller. This patch adds support for this controller in Armada 370 and Armada XP SoC common device tree files. Note that the Armada XP SPI register length is 0x50 bytes, while Armada 370 SPI register length is 0x28 bytes, so we choose the smaller of the two. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: update DT to support local timersGregory CLEMENT1-2/+3
Now that the time-armada-370-xp support local timers, updated the device tree to take it into account. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Dove: convert usb host controller to DTSebastian Hesselbarth1-0/+16
With DT support for orion-ehci also convert Dove to it and remove the legacy calls and clock aliases. This patch is based on "ARM: Dove: split legacy and DT setup" applied to mvebu/boards recently. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Enable USB controllers on Armada 370/XP boardsEzequiel Garcia4-0/+34
This patch activates every USB port provided by each SoC. Except for Armada XP Openblocks AX3-4 board, where we enable only the first two USB ports until we have more information on the third one usage. Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add support for USB host controllers in Armada 370/XPEzequiel Garcia3-0/+41
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller. This patch adds support for this controller in Armada 370 and Armada XP SoC common device tree files. Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: add button for OpenBlocks AX3-4Thomas Petazzoni1-0/+12
The OpenBlocks AX3-4 board has one software-controlled button on the front side, labeled "INIT", so we add minimal support for this button in the kernel. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert NS2 to gpio-poweroff.Andrew Lunn1-0/+6
Remove C code and add a Device Tree node in its place. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert NSA310 I2C to device treeAndrew Lunn1-0/+5
Add a sub-node into the I2C node to represent the adt7476 device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driverAndrew Lunn1-0/+5
Remove the C code and add a Device Tree node for gpio-poweroff. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert NSA310 to DT based regulators.Andrew Lunn1-0/+17
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Dove: add fixed regulator for CuBox USB powerSebastian Hesselbarth1-1/+24
CuBox needs to enable USB power on a gpio pin. Add a fixed regulator to always enable usb power on boot. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Dove: move CuBox led pinctrl to gpio-leds nodeSebastian Hesselbarth1-1/+4
gpio-leds has support for pinctrl allocation, make use of it. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert openblocks A6 board to pinctrlNobuhiro Iwamatsu1-0/+116
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Add pinctrl of NAND to 88f6282Nobuhiro Iwamatsu1-0/+6
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282Nobuhiro Iwamatsu1-0/+6
The 88f6282 has one more TWSI(TWSI1). This add the information to enable pinctl of TWSI1. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: kirkwood: add pinmux option for the SDIO interface on 88F6282Thomas Petazzoni1-0/+5
This commit adds a pinmux option, pmx_sdio, to enable the muxing of the SDIO interface on the 88F6282 SoC from Marvell. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 12:47:24 +0000