summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sun6i-a31s-cs908.dts
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23ARM: dts: sunxi: Add mdio bus sub-node to GMACChen-Yu Tsai1-3/+6
The DWMAC binding never supported having the Ethernet PHY node as a direct child to the controller, nor did it support the "phy" property as a way to specify which Ethernet PHY to use. What seemed to work was simply the implementation ignoring the "phy" property and instead probing all addresses on the MDIO bus and using the first available one. The recent switch from "phy" to "phy-handle" breaks the assumptions of the implementation, and does not match what the binding requires. The binding requires that if an MDIO bus is described, it shall be a sub-node with the "snps,dwmac-mdio" compatible string. Add a device node for the MDIO bus, and move the Ethernet PHY node under it. Also fix up the #address-cells and #size-cells properties where needed. Fixes: de332de26d19 ("ARM: dts: sunxi: Switch from phy to phy-handle") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-22ARM: dts: sunxi: Switch from phy to phy-handleMaxime Ripard1-1/+1
The phy device tree property has been deprecated in favor of phy-handle, let's replace it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-28ARM: dts: sun6i: Change pinctrl nodes to avoid warningMaxime Ripard1-3/+3
All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-03-27ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h headerChen-Yu Tsai1-2/+0
All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm/boot/dts/sun?i*.* arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra empty line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-06ARM: dts: sun6i: Enable otg controller on the cs908Hans de Goede1-0/+5
The cs908 has the otg controller connected to one of the 2 usb-A receptacles it has on the front, so enable the otg controller in host-only mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-10ARM: sunxi: dt: Remove the FSF addressMaxime Ripard1-5/+0
The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard1-0/+8
Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: dts: sun6i: csq cs908 dts cleanupHans de Goede1-23/+14
Remove the unused usb1_vbus_pin_csq908 node (vbus is always on on the cs908), and sort the remaining nodes alphabetically. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard1-2/+4
The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert to device tree includesMaxime Ripard1-1/+1
Prepare the device trees to use the C preprocessor. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun6i: Add dts file for CSQ CS908 boardHans de Goede1-0/+102
The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG controller), ethernet, 3.5 mm jack with a/v out and hdmi out. Note it has no sdcard slot and therefore can only be fel booted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>