Age | Commit message (Collapse) | Author | Files | Lines |
|
The chromebook .dtsi file contains common settings for veyron
Chromebooks with eDP displays. Some veyron devices with a display
aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
display related bits from the chromebook .dtsi into a separate file
to avoid redundant DT settings.
The new file is included from the chromebook .dtsi and can be
included by non-Chromebook devices with a display.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Let's document the display timings that most veyron chromebooks (like
jaq, jerry, mighty, speedy) have been using out in the field. This
uses the standard blankings but a slightly slower clock rate, thus
getting a refresh rate 58.3 Hz.
NOTE: this won't really do anything except cause DRM to properly
report the refresh rate since vop_crtc_mode_fixup() was rounding the
pixel clock to 74.25 MHz anyway. Apparently the adjusted rate isn't
exposed to userspace so it's important that the rate we're trying to
achieve is mostly right.
For the downstream kernel change related to this see See
https://crrev.com/c/324558.
NOTE: minnie uses a different panel will be fixed up in a future
patch, so for now we'll just delete the panel timings there.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This is the other half of the hacky solution from commit f497ab6b4bb8
("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on
veyron"). Specifically the LPM driver that the Broadcom Bluetooth
expects to have (but is missing in mainline) has two halves of the
equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was
handled in the previous commit) is the one that lets the Bluetooth
wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth
that it's OK to go into a low power mode. That means we were burning
a bit of extra power in S3 without this patch. Measurements are a bit
noisy, but it appears to be a few mA worth of difference.
NOTE: Though these pins don't do much on systems with Marvell
Bluetooth, downstream kernels set it on all veyron boards so we'll do
the same.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
With a single device DT overrides can become messy, especially when
keys are added or removed. Multiple devices also allow to
enable/disable wakeup per key/group.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[used actual switch+event constants in new lid-switch entry]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As per my comments when the device tree for rk3288-veyron-chromebook
first landed:
> Technically I think vcc33_ccd can be off since we have
> 'needs-reset-on-resume' down in the EHCI port (this regulator is for
> the USB webcam that's connected to the EHCI port).
>
> ...but leaving it on for now seems fine until we get suspend/resume
> more solid.
It's probably about time to do it right.
[1] https://lore.kernel.org/linux-arm-kernel/CAD=FV=U37Yx8Mqk75_x05zxonvdc3qRMhqp8TyTDPWGHqSuRqg@mail.gmail.com/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Even though upstream Linux doesn't yet go into deep enough suspend to
get DDR into self refresh, there is no harm in setting these pins up.
They'll only actually do something if we go into a deeper suspend but
leaving them configed always is fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.
Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.
Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:
/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g
Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Fix for a new warning from dtc in graph node unit addresses.
* tag 'v4.18-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix graph node unit address error from dtc
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers.
All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only)
claim to be GPL and X11 while the actual license text is MIT. Use the
MIT SPDX tag for them.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The updated dtc emits a warning for the edp-panel of two rk3288 boards:
Warning (graph_endpoint): /dp@ff970000/ports/port@1/endpoint: graph node unit address error, expected "0"
Fix this by adding the necessary @0 to the endpoint node.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
For veyron the binding should provide both PWM timings, the delay between
you enable the PWM and set the enable signal, and the delay between you
disable the PWM signal and clear the enable signal. Update the binding
accordingly, in this case the panels connected to the veyron boards have
a symmetric power sequence, hence the same value is used.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This was used out-of-tree as a hack for resolving issues where some
systems expect the backlight to turn on automatically at boot, while
others expect to manage the backlight status via a DRM/panel driver.
Those issues have since been fixed upstream in pwm_bl.c without device
tree hacks, and so this un-documented property should no longer be
useful.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use macros to describe gpios will make the dts easier to
read and write.
All the modifications done with sed:
sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
Tested with:
for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[also adapted the gpio interrupts]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add analog-audio functionality for Veyron devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
After hooking up panel and backlight informations, enable the
edp on veyron chromebooks now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
|
|
Many Veyron chromebooks share the same panel type, so define the core
settings for all of them and allow the few runaways to override it later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
|
|
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup and in one instance a
value "0" is assigned probably assuming it won't be enabled as a wakeup
source. Since the presence of the boolean property indicates it is
enabled, value of "0" have no value.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This adds the shared devicetree files for the Veyron device family.
They are split, as not all veyron devices are chromebooks and
not all contain a sd-card slot.
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
|