Age | Commit message (Collapse) | Author | Files | Lines |
|
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:
arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds:
'blue', 'green', 'sleep'
do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix these errors with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.
Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.
Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:
/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g
Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers.
All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only)
claim to be GPL and X11 while the actual license text is MIT. Use the
MIT SPDX tag for them.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The CLK_O_SEL default is synchronous to XI input clock, which is 25 MHz.
Set CLK_O_SEL to channel A transmit clock so we have 125 MHz on CLK_OUT.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner:
For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
like the Rock2 getting its otg port, recovery and power keys enabled.
The vyasa board gained an enabled emmc node and the phyCORE boards
got UHS speeds in their sd card and a fixed sd-card power supply.
Finally the veyron boards dropped a nonstandard and unused property.
* tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square
ARM: dts: rockchip: add recovery button for Rock2 Square
ARM: dts: rockchip: add power key for Rock2 Square
ARM: dts: rockchip: Add eMMC node for rk3288-vyasa
ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK
ARM: dts: rockchip: Fix supply node for card's power on phycore som
ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node
ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'
|
|
Rockchip recommends to run the CPU cores only with operations points of
1.6 GHz or lower.
Removed the cpu0 node with too high operation points and use the default
values instead.
Fixes: 903d31e34628 ("ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The phyCORE-RK3288 RDK could enable SD3.0 card but need vdd_io_sd to
support the voltage range from 1.8V to 3.3V.
And we have also to add relevant UHS modes to the sdmmc node.
Let's also turn off the vdd_io_sd regulator in suspend state.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In order to be able to use more than 4GB of RAM when the LPAE is
activated, the dts must be converted in 64 bits.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We deprecated the "num-slots" property now and plan to get
rid of it finally. Just move a step to cleanup it from DT.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
The module can be connected to different carrier boards.
It can be also equipped with different RAM, SPI flash and eMMC variants.
The Rapid Development Kit option is using the following setup:
- 1 GB DDR3 RAM (2 Banks)
- 1x 4 KB EEPROM
- DP83867 Gigabit Ethernet PHY
- 16 MB SPI Flash
- 4 GB eMMC Flash
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|