summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx7d-pico.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2022-08-21ARM: dts: imx7d-pico: indent use tabs, no spaces at start of lineMarcel Ziswiler1-5/+5
Avoid the following checkpatch warning: arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs where possible arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx7d-pico: Fix the 'tuning-step' propertyFabio Estevam1-1/+1
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the correct name of the property is 'fsl,tuning-step'. Fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Fixes: f13f571ac8a1 ("ARM: dts: imx7d-pico: Extend peripherals support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx7d-pico: Add LCD supportFabio Estevam1-0/+90
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11ARM: dts: imx: Fix the AR803X phy-modeFabio Estevam1-1/+1
Commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") exposed an issue on imx DTS files using AR8031/AR8035 PHYs. The end result is that the boards can no longer obtain an IP address via UDHCP, for example. Quoting Andrew Lunn: "The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue" To fix this problem, the phy-mode property needs to be "rgmii-id", which has the following meaning as per Documentation/devicetree/bindings/net/ethernet.txt: "RGMII with internal RX and TX delays provided by the PHY, the MAC should not add the RX or TX delays in this case)" Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with successfully restored networking. Based on the initial submission from Steve Twiss for the imx6qdl-sabresd. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Soeren Moch <smoch@web.de> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Adam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Extend peripherals supportFabio Estevam1-0/+183
This extends the peripherals supported by the imx7d-pico.dtsi. It adds: - I2C2 - Flexcan (flexcan1 and flexcan2 ports) - USDHC1 - UART (6 and 7 ports) - PWM (4 ports) - eCSPI3 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Improve WiFi regulator nameOtavio Salvador1-5/+5
There are different models of WiFi being used in the SoM and the handle name was too restrictive. This reworks it to a more generic and meaningful name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIOFabio Estevam1-0/+2
Pass the "phy-reset-gpios" property in order to describe the GPIO that performs the Ethernet PHY reset. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrlFabio Estevam1-0/+2
Pass the USBOTG1_PWR pinctrl description in the USBOTG GPIO controlled regulator. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsiFabio Estevam1-3/+108
imx7d-pico-pi board contains: - One SoM board (imx7d pico) - One base board (pi). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx7d-pico.dtsi file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Switch to SPDX identifierFabio Estevam1-41/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7d-pico: Do not harcode the memory sizeFabio Estevam1-1/+2
Currently the memory size described in dts is 2GB, which is incorrect. There are 512MB and 1GB versions of imx7d-pico boards, so remove the hardcoded memory size and let the bootloader pass the correct value to the kernel. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10Merge tag 'imx-fixes-4.20-3' into imx7d/picoShawn Guo1-1/+21
i.MX fixes for 4.20, round 3: - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct the description of the Wifi clock. - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that different boards can be covered. This fixes the ARM LDO failure seen on some customer boards.
2018-12-10ARM: dts: imx7: Fix memory node duplicationFabio Estevam1-0/+1
Boards based on imx7 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx7s.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-05ARM: dts: imx7d-pico: Describe the Wifi clockFabio Estevam1-1/+21
The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D CLKO2 output pin, so describe the pinmux and clock hierarchy in the device tree to allow the Wifi chip to be properly clocked. Managed to successfully test Wifi with such change. Used the standard nvram.txt file provided by TechNexion, which selects an external 32kHz clock for the Wifi chip by default. Fixes: 99a52450c707 ("ARM: dts: imx7d-pico: Add Wifi support") Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7d-pico-pi: Separate into cpu and baseboard dtsVanessa Maegima1-0/+309
Separate the old imx7d-pico into cpu (imx7d-pico.dtsi) and baseboard (imx7d-pico-pi.dts) dts so the same cpu dtsi can be used in different baseboards variants. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 05:35:05 +0000