summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6dl.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-09-05ARM: dts: imx6qdl: move iomuxc compatible assignment out of root nodeMarco Felsch1-4/+4
The common imx6qdl.dtsi already defines the iomuxc phandle. Make use of it in the imx6dl.dtsi and imx6q.dtsi. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx: add nvmem property for cpu0Peng Fan1-0/+2
Add nvmem related property for cpu0, then nvmem API could be used to read cpu speed grading to avoid directly read OCOTP registers mapped which could not handle defer probe. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: Make iomuxc node name genericAnson Huang1-1/+1
Node name should be generic, use "pinctrl" instead of "iomuxc" for all i.MX6/7 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: use generic name busPeng Fan1-2/+2
Per devicetree specification, generic names are recommended to be used, such as bus. i.MX AIPS is a AHB - IP bridge bus, so we could use bus as node name. Script: sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/vf*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/vf*.dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl: Add missing cooling device properties for CPUsAnson Huang1-0/+1
The cooling device properties "#cooling-cells" should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx: Add an cpu0 label for imx6dl devicesJan Tuerk1-1/+1
Adding the label cpu0 allows the adjustment of cpu-parameters by reference in overlaying dtsi files in the same way as it is possible for imx6q devices. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-03ARM: dts: imx: Add missing OPP properties for CPUsViresh Kumar1-0/+23
The OPP properties, like "operating-points", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can create an OPP table. Add such missing properties. Fix other missing properties (like clocks, supply, clock latency) as well to make it all work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-28ARM: dts: imx: add cooling-cells for cpufreq cooling deviceAnson Huang1-0/+1
Add #cooling-cells for i.MX6/7 SoCs for cpufreq cooling device usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: Switch to SPDX identifierFabio Estevam1-9/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6dl: remove 'lcdif' nodeLothar Waßmann1-5/+0
According to the "i.MX 6Solo/6DualLite Applications Processor Reference Manual" Rev. 3, 09/2017 there is no LCDIF unit on the i.MX6DL. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-24ARM: dts: imx6: remove GPU subsystem nodesLucas Stach1-5/+0
They aren't needed by the etnaviv driver anymore and have been removed from the binding. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6dl: Remove unneeded label and unit addressFabio Estevam1-2/+2
Remove unneeded label and unit address in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux@34 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux@34 has a unit name, but no Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6dl: Pass the reg properties for mipi nodesFabio Estevam1-0/+8
Pass the reg properties for mipi nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@1/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@1/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@2/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@2/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@3/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@3/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@4/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@4/endpoint@1 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-8/+8
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-14ARM: dts: imx6qdl: add capture-subsystem deviceSteve Longerbeam1-0/+5
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-14ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connectionsPhilipp Zabel1-0/+174
This patch adds the device tree graph connecting the input multiplexers to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU multiplexers are added as children of the iomuxc-gpr syscon device node. On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2 CSI1 allow to select between CSI0/1 parallel input pads and the MIPI CSI-2 virtual channels 0/3. On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1 CSI1 allow to select between CSI0/1 parallel input pads and any of the four MIPI CSI-2 virtual channels. Changes from Steve Longerbeam: - Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu) - Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..." to "mipi_vcX...". - Added input endpoint anchors to the video muxes for the connections from parallel sensors. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-14ARM: dts: imx6qdl: add multiplexer controlsPhilipp Zabel1-0/+10
The IOMUXC General Purpose Register space contains various bitfields that control video bus multiplexers. Describe them using a mmio-mux node. The placement of the IPU CSI video mux controls differs between i.MX6D/Q and i.MX6S/DL. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-23ARM: dts: imx6dl: fix GPIO4 rangeSébastien Szymanski1-1/+1
GPIO4_11 is on pin 152(MX6DL_PAD_KEY_ROW2) and not on pin 151(MX6DL_PAD_KEY_ROW1). I found the error while booting a mainline kernel on APF6S SoM and noticed the following message: [ 2.609337] imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_KEY_ROW1 already requested by 20a8000.gpio:105; cannot claim for 20a8000.gpio:107 [ 2.621884] imx6dl-pinctrl 20e0000.iomuxc: pin-151 (20a8000.gpio:107) status -22 [ 2.629303] spi_imx 2008000.ecspi: Can't get CS GPIO 107 With this patch, the message is gone and spi_imx driver probes correctly. Fixes: bb728d662bed ("ARM: dts: add gpio-ranges property to iMX GPIO controllers") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-09ARM: dts: add gpio-ranges property to iMX GPIO controllersVladimir Zapolskiy1-0/+53
To establish a connection between GPIO controllers and pin multiplexor controller add gpio-ranges properties to all GPIO controllers found on iMX50, iMX6Q/D, iMX6DL/S, iMX6SL, iMX6SX, iMX6UL and iMX7D/S SoCs. The change was done after human parsing of output from % gawk -n '{ sub(/.*__/, ""); if ($1 ~ "^GPIO") print $1, $2/4}' imxXX-pinfunc.h | sort -n Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-26ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operationFabio Estevam1-1/+1
Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015): http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf states the following: "LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation up to 396 MHz." So fix the entry by adding the 25mV margin value as done in the other entries of the table, which results in 1.15V for 396MHz operation. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6: add Vivante GPU nodesLucas Stach1-0/+5
This adds the device nodes for 2D, 3D and VG GPU cores. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6dl: Fix gpt compatibles, remove imx6q-gptMarkus Pargmann1-1/+1
imx6qdl.dtsi uses compatibles "fsl,imx6q-gpt", "fsl,imx31-gpt". imx6dl.dtsi uses compatibles "fsl,imx6dl-gpt", "fsl,imx6q-gpt" since commit 4e415ed8143f (ARM: dts: imx6dl: add imx6dl gpt specific compatible string) If imx6dl would be compatible with imx6q-gpt it would also have to be compatible with imx31-gpt which is currently missing. Based on the above mentioned patch I assume imx6q-gpt and imx6dl-gpt are not compatible. So imx6q-gpt should be removed as compatible. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-06-03ARM: dts: imx6dl: add imx6dl gpt specific compatible stringShawn Guo1-0/+4
The i.MX6DL/S GPT has a different programming model from i.MX6Q one. Add the compatible string "fsl,imx6dl-gpt" for it, and leave "fsl,imx6q-gpt" there to keep the existing/old kernel happy. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05ARM: dts: imx6dl: correct cpufreq volt/freq tableAnson Huang1-1/+1
Currently the cpufreq volt/freq table we used is for LDO enable mode, according to latest datasheet Rev. 3, 03/2014, the volt/freq table is as below: LDO enabled(min value): 996MHz: VDDARM: 1.225V, VDDSOC: 1.150V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 1.050V, VDDSOC: 1.150V; LDO bypassed(min value): 996MHz: VDDARM: 1.250V, VDDSOC: 1.150V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 1.050V, VDDSOC: 1.150V; Adding 25mV to cover board IR drop, for LDO enabled mode of 996MHz, VDDARM should be 1.250V, so this patch updates it. Signed-off-by: Anson Huang <b20788@freescale.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23ARM: dts: imx6qdl: Enable CODA960 VPUPhilipp Zabel1-0/+4
This patch adds links to the on-chip SRAM and reset controller nodes and switches the interrupts. Make the BIT processor interrupt, which exists on all variants, the first one. The JPEG unit interrupt, which does not exist on i.MX27 and i.MX5 thus is an optional second interrupt. Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to load separate firmware images for some reason. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23ARM: dts: imx6dl: add alias for I2C4 busVladimir Zapolskiy1-0/+4
On registration I2C bus drivers attemp to get ids from device tree aliases, add a missing alias for I2C4 found on iMX6 DualLite/Solo. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-07-18ARM: dts: imx6qdl: use DT macro for clock IDShawn Guo1-7/+10
Switch to use DT macro for clock ID, so that device tree source is more readable. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx6: i2c4 cleanupIain Paton1-1/+2
add missing i2c4 clock and correct the compatible string to match other imx6 i2c blocks Signed-off-by: Iain Paton<ipaton0@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-4/+25
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-03-07ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsiPhilipp Zabel1-13/+9
This patch connects IPU and display encoder (HDMI, LVDS, MIPI) device tree nodes, as well as parallel displays on the DISP0 and DISP1 outputs, using the OF graph bindings described in Documentation/devicetree/bindings/media/video-interfaces.txt The IPU ports correspond to the two display interfaces. The order of endpoints in the ports is arbitrary. Each encoder with an associated input multiplexer has multiple input ports in the device tree. The order and reg property of the ports must correspond to the multiplexer input order. Since the imx-drm node now only needs to contain links to the display interfaces, it can be moved to the SoC dtsi level. At the board level, only connections between the display interface ports and encoders or panels have to be added. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-24imx-drm: update and fix imx6 DT descriptions for v3 HDMI driverRussell King1-1/+2
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-24imx-drm: add imx6 DT configuration for HDMIRussell King1-0/+4
Extracted from another patch by Fabio Estevam, this adds the DT configuration for HDMI output on the IMX6 SoCs Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-09ARM: dts: imx6dl: enable cpufreq supportAnson Huang1-0/+20
This patch adds cpufreq dts for i.mx6dl to support cpufreq driver. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGHTroy Kisky1-4/+5
Make the interrupts node slightly more readable. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: ocram size is different between imx6q and imx6dlShawn Guo1-0/+6
The ocram on imx6q is 256 KiB while on imx6dl it's 128 KiB. Let's have separate node for imx6q and imx6dl. It also changes imx6q size 0x3f000 to 0x40000 to match the hardware. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Liu Ying <Ying.Liu@freescale.com>
2013-08-22ARM: dts: imx: share pad macro names between imx6q and imx6dlShawn Guo1-371/+1
The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board design can work with either chip plugged into the socket, e.g. sabresd and sabreauto boards. We currently define pin groups in imx6q.dtsi and imx6dl.dtsi respectively because the pad macro names are different between two chips. This brings a maintenance burden on having the same label point to the same pin group defined in two places. The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs pad macro names. Then the pin groups becomes completely common between imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the long term maintenance of imx6q/dt pin settings becomes easier. Unfortunately, the change brings some dramatic diff stat, but it's all about DTS file, and the ultimate net diff stat is good. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2Huang Shijie1-0/+9
In the arm2 board, the UART2 works in the dte mode. So add a pinctrl for both the imx6q{dl} boards. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6dl-wandboard: Add audio supportFabio Estevam1-0/+7
Wandboard has a sgtl5000 codec. Add audio support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM i.MX6DL: dts: add clock and mux configuration for LDBPhilipp Zabel1-0/+17
i.MX6DL does not have the second IPU, but the LVDS multiplexers can connect either LVDS channel of the LDB to IPU1 DI0 or IPU1 DI1. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [shawn.guo: remove "crtcs" property from imx6qdl.dtsi] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX6: sync imx6q and imx6dl pinmux entriesSascha Hauer1-3/+120
The i.MX6Q and i.MX6DL are pin compatible, so the pinmux entries should be in sync. This patch systematically adds the pinmux entries missing from the imx6q to the imx6dl file. Some name inconsistencies and whitespace damage is fixed along the way. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6dl: add a new pinctrl for ecspi1Huang Shijie1-0/+8
This new pinctrl is used in the imx6dl-sabresd board. Signed-off-by: Huang Shijie <b32955@freescale.com>
2013-06-20Merge tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann1-0/+112
into next/dt From Shawn Guo: imx device tree changes for 3.11: * A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53, imx53-m53evk and imx27-phytec-phycore * Various pinctrl setting updates and additions * Enable various on board peripherals, usb, audio, nor, display etc. * Configure L2 cache data and tag latency from device tree * Add imx-weim bus driver * tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits) ARM: dts: imx27: Add VPU devicetree node ARM: mxc: fix gpio-ranges for VF610 ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1 ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration ARM: dts: Phytec imx6q pfla02 and pbab01 support ARM: dts: imx6q: Add pinctrl for usdhc2 and enet ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support ARM: dts: i.MX27: Add SDHC devicetree nodes ARM: dts: i.MX27: Add DMA devicetree node ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR ARM: dts: imx6dl: add pinctrls for WEIM NOR ARM: dts: imx6q: add pinctrls for WEIM NOR ARM: dts: imx6qdl: add more information for WEIM ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-17ARM: dtsi: imx6dl: Add a pinctrl for AUDMUXNicolin Chen1-0/+11
Add a pinctrl for AUDMUX used on imx6dl-sabresd. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1Nicolin Chen1-0/+9
Add a pinctrl for I2C1 used on imx6q/dl-sabresd. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add pinctrls for WEIM NORHuang Shijie1-0/+58
Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add a pinctrl for eCSPI1Huang Shijie1-0/+10
Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add pinctrl for gpmi-nandHuang Shijie1-0/+24
add the pinctrl item for gpmi-nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-23ARM: dts: imx: cpus/cpu nodes dts updatesLorenzo Pieralisi1-0/+2
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: dts: Add initial support for Wandboard Dual-LiteFabio Estevam1-0/+11
Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: dts: imx: add initial imx6dl-sabreauto supportShawn Guo1-0/+29
Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 23:57:03 +0000