summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx28-tx28.dts
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10ARM: dts: imx28: Fix memory node duplicationFabio Estevam1-0/+1
Boards based on imx28 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx28.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-20ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup sourceDaniel Mack1-0/+1
The touchscreen driver no longer configures the device as wakeup source by default. A "wakeup-source" property is needed. To avoid regressions, this patch changes the DTS files for the only two users of this driver that didn't have this property yet. Signed-off-by: Daniel Mack <daniel@zonque.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: drop 'clocks' container for board level clocksShawn Guo1-9/+4
For soc level of clocks which are input to Clock Control Module, clock driver expects them to be under 'clocks' container node. But for board level clocks, this container is not really necessary. Let's drop it and use an unique name for fixed rate clock, so that 'reg' property can be saved as well. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
2018-02-24ARM: dts: imx28-tx28: Pass the memory unit nameFabio Estevam1-2/+2
Pass the memory unit name in order to fix the following dtc warning with W=1: arch/arm/boot/dts/imx28-tx28.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx28-tx28: Pass unit address and reg to IOMUX nodeFabio Estevam1-10/+20
Pass unit address and reg to IOMUX node to fix the following build warning with W=1: arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-edt-ft5x06-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-flexcan-xcvr-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-23bit missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-ctrl missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-mac0-gpio-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-pca9554-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/spi-gpiogrp missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-tsc2007-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy0-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy1-pins missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-30Merge tag 'imx-dt-4.15' of ↵Arnd Bergmann1-78/+97
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree updates for 4.15" from Shawn Guo: - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6 TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1 variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX Vining-2000 board. - Use the 'vpcie-supply' property for PCIe device for boards imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6. - A series from Jagan Teki to update imx6qdl-icore board with audio, touch and CAN support. - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add tempmon support for i.MX6UL. - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53 and i.MX6 TX modules. - Fix DTC warnings in i.MX device trees, dropping leading zeros from unit address, correcting display nodes notation and display port names, fixing nodes with unit name and no reg property. - Other random device updates for various board support. * tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) ARM: dts: imx53-tx53: fix interrupt flags ARM: dts: imx28-tx28: fix interrupt flags ARM: dts: display5: Device tree description of LWN's DISPLAY5 board ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property ARM: dts: imx: add ZII RDU1 board ARM: dts: imx: add support for TX6 modules on MB7 baseboard ARM: dts: imx: add support for TX6QP ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard ARM: dts: imx6-tx6: move display configuration to .dtsi file ARM: dts: imx6-tx6: add support for I2C bus recovery ARM: dts: imx6-tx6: convert to using simple-audio-card ARM: dts: imx6-tx6: specify ethernet phy reset post-delay ARM: dts: imx6-tx6: improve ethernet related pinctrl setup ARM: dts: imx6-tx6: add trickle-charge config for DS1339 ARM: dts: imx6-tx6: remove obsolete ipu1 alias ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts ... [arnd: made sure we have no new leading zeroes in unit address during merge]
2017-10-24ARM: dts: imx28-tx28: fix interrupt flagsLothar Waßmann1-2/+2
Some interrupts properties are given '0' as the flags argument. Change them to use the appropriate interrupt flags. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx28-tx28: add trickle-charge config for DS1339Lothar Waßmann1-0/+2
As the DS1339 driver now supports enabling the trickle charge feature via DTB, add the appropriate properties to utilize this feature. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-1/+1
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-14ARM: dts: imx28-tx28: remove the regulators busLothar Waßmann1-70/+57
It is not recommended to place the regulator nodes inside 'simple-bus', so adjust them accordingly. The motivation for rearranging this is to make it easier to add new regulator nodes in the future. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14ARM: dts: imx28-tx28: Relicense the TX28 dts file under GPLv2/X11Lothar Waßmann1-6/+36
The current GPL only licensing on the dts file makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our dts files first under a GPL/X11 dual-license. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11ARM: dts: imx28-tx28: fix dtc warningStefan Wahren1-1/+1
This fixes the following dtc warning by removing the unnecessary unit: Warning (unit_address_vs_reg): Node /matrix-keypad@0 has a unit name, but no reg property Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx28-tx28: use correct mclk frequencyLothar Waßmann1-1/+1
The reference clock for the SGTL5000 is generated by a 26MHz crystal oscillator on the Ka-Ro electronics STK5 eval kits. Use the correct frequency setting in DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx: replace legacy wakeup property with 'wakeup-source'Sudeep Holla1-1/+1
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" and "enable-sdio-wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-27ARM: dts: set up trigger type for edt-ft5x06 interruptsDmitry Torokhov1-1/+2
Now that the driver respects IRQ trigger settings from device tree, let's fix them up in individual DTSes (note that the driver is still compatible with older DTSes). Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-16ARM: dts: imx28-tx28: add alias for CAN XCVR regulatorLothar Waßmann1-0/+1
This alias is used by U-Boot to enable/disable the regulator depending on baseboard type. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxsLothar Waßmann1-0/+54
The spi-mxs driver does not allow full duplex SPI transfers. The spi-gpio driver may be used as an alternative if this is required. Make the choice between those drivers easier for the end user by providing settings for both drivers. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: use GPIO flagsLothar Waßmann1-18/+18
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidevLothar Waßmann1-2/+8
The labels on the spidev nodes are not used and not required, so remove them. The TX28 supports 3 chipselects on the SPI interface. Make all those chipselects available to the user. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: Fix display duplicate name warningFabio Estevam1-3/+3
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-02-10ARM: dts: imx28-tx28: Remove 'enable-active-low' propertyFabio Estevam1-1/+0
'enable-active-low' is not a valid property for a GPIO controlled regulator. According to Documentation/devicetree/bindings/regulator/gpio-regulator.txt: "Optional properties: ... - enable-active-high : Polarity of GPIO is active high (default is low)." ,so the correct way to define an active-low GPIO controlled regulator is to simply not pass 'enable-active-high'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx: use generic node name for fixed regulatorShawn Guo1-7/+16
The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: tx28: restructure and update DTS fileLothar Waßmann1-82/+619
Update the Ka-Ro TX28 DTS file. - add Copyright header - use label references for better readability - sort the entries alphabetically - add some aliases used by U-Boot to modify the DT data Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headersLothar Waßmann1-1/+1
Convert mx23/mx28 dts filed to use the pinctrl header files. NOTE: During automatic conversion of these files to use the pinconfig definitions an inconsistency has been found in: arch/arm/boot/dts/imx28-apx4devkit.dts According to the comment the function for pad SSP2_SS0 should have been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131 represents: MX28_PAD_SSP2_SS0__AUART3_TX I used the later (though probably wrong) definition because that's what is actually being used in the DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23ARM: mxs: Rename 'hog-gpios'Fabio Estevam1-1/+1
hog_pins is used to setup the pin functions, and it is not neccesarily used only for GPIO pins, so use only 'hog' to describe a more generic term. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: tx28: reset fec phy for device tree bootShawn Guo1-1/+20
For non-DT boot, function tx28_add_fec0 configures all ENET0 pins into gpio mode for resetting fec phy, and then reconfigures those pins into ENET function after that. For DT boot, all the pin configuration is done by pinctrl subsystem. Ideally, when gpio_request gets called, GPIO subsystem should call pinctrl to configure pins into gpio mode automatically, and have pins freed up from pinctrl subsystem when gpio_free is called. But right now, this cooperation between gpio and pinctrl hasn't been available. As the result, we have to explicitly call pinctrl_get_select and pinctrl_put for device tree boot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
2012-07-11ARM: mxs: rename dts files with soc name being the prefixShawn Guo1-0/+97
Rename mxs dts files with soc name being the prefix, so that the board dts file can be located easily by soc name, and we also gain the consistency of naming. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>