summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx27.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20ARM: dts: imx: Pass a label to the AIPS nodesFabio Estevam1-2/+2
Pass a label to the AIPS nodes to make it easier to reference it from other devicetree files. Some i.MX dtsi files already describe labels for the AIPS nodes. Make it available for all SoCs for consistency. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx: Pass a label to the soc nodeFabio Estevam1-1/+1
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-05ARM: dts: imx27: use new 'dma-channels' propertyKrzysztof Kozlowski1-1/+1
The '#dma-channels' property was deprecated in favor of one defined by generic dma-common DT bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-29ARM: dts: imx: align watchdog node name with dtschemaKrzysztof Kozlowski1-1/+1
The dtschema expects watchdog device node name to be "watchdog": arch/arm/boot/dts/imx31-bug.dt.yaml: wdog@53fdc000: $nodename:0: 'wdog@53fdc000' does not match '^watchdog(@.*|-[0-9a-f])?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22ARM: dts: imx27: Change nand node name to nand-controllerAnson Huang1-1/+1
Change i.MX27 nand node name from "nand" to "nand-controller" to be compliant with yaml schema, it requires the nodename to be "nand-controller". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi filesUwe Kleine-König1-1/+1
The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Change sdhci node name on i.MX27/i.MX31 SoCsAnson Huang1-3/+3
Change i.MX27/i.MX31 node name from sdhci to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: change iim node name on i.MX SoCsAnson Huang1-1/+1
Change IIM node name from iim to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: align name for crypto node and child nodesHoria Geantă1-1/+1
crypto node should use the "crypto" generic naming, and not a specific one ("sahara", "dcp", "caam"). Child nodes of the crypto node for caam crypto engine should use the "jr" name (without an index), as indicated in the DT binding. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx: Rename "iram" node to "sram"Krzysztof Kozlowski1-1/+1
The device node name should reflect generic class of a device so rename the "iram" node to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-12ARM: dts: imx: Change i.MX27 interrupt controller unit nameAlexander Shiyan1-1/+1
The interrupt controller is located at the physical address 0x10040000. This patch changes the unit name of the controller to reflect the actual address. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx27: Fix memory node duplicationFabio Estevam1-2/+0
Boards based on imx27 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx27.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx: Fix SPI bus warningsRob Herring1-3/+3
dtc has new checks for SPI buses. Fix the warnings in node names and unit-addresses. There's over 100 warnings for FSL boards, a few examples: arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: Switch to SPDX identifierFabio Estevam1-10/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx27: use label to override osc26m clock settingShawn Guo1-1/+1
Instead of copying the whole node hierarchy, let's define a label for clock osc26m in soc dtsi and use it for overriding clock-frequency. Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: drop unnecessary #address-cells/#size-cellsShawn Guo1-3/+0
It drops unnecessary #address-cells/#size-cells from <soc>.dtsi 'clocks' node to fix DTC warning avoid_unnecessary_addr_size seen with W=1 switch. Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Remove empty memory size nodesMarco Franchi1-1/+1
Remove the empty reg property from the SoC dtsi files in order to avoid duplicate memory nodes when the correct size is passed in board dts files. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-23Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-01-24ARM: dts: imx: Pass 'chosen' and 'memory' nodesFabio Estevam1-0/+8
Commit 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot issues when the bootloader does not create a 'chosen' node if such node is not present in the dtb. The reason for the boot failure is well explained by Javier Martinez Canillas: "the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info." , so pass an empty 'chosen' node to fix the boot problem. This issue has been seen in the kernelci reports with Barebox as bootloader. Also pass the 'memory' node in order to fix boot issues on the SolidRun iMX6 platforms. Fixes: 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx: Adjust CPU nodesFabio Estevam1-0/+1
Make CPU nodes consistent throughout the i.MX dts files, which also matches the description from ePAPR spec. This also fixes the following W=1 warning in some cases: Warning (unit_address_vs_reg): Node /cpus/cpu@0 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14ARM: dts: imx: Remove skeleton.dtsiFabio Estevam1-1/+3
As explained by commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-18ARM: dts: imx27.dtsi: change the clock information for usbPeter Chen1-4/+12
For imx27, it needs three clocks to let the controller work, the old code is wrong, and usbmisc has not included clock handling code any more. Without this patch, it will cause below data abort when accessing usbmisc registers. usbcore: registered new interface driver usb-storage Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600 pgd = c0004000 [f4424600] *pgd=10000452(bad) Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089 Hardware name: Freescale i.MX27 (Device Tree Support) task: c7832b60 ti: c783e000 task.ti: c783e000 PC is at usbmisc_imx27_init+0x4c/0xbc LR is at usbmisc_imx27_init+0x40/0xbc pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093 sp : c783fe08 ip : 00000000 fp : 00000000 r10: c0576434 r9 : 0000009c r8 : c7a773a0 r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0 r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc783e190) Stack: (0xc783fe08 to 0xc7840000) Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+ Acked-by: Shawn Guo <shawnguo@kernel.org>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-08-11ARM: dts: imx27: add support of internal rtcPhilippe Reynes1-0/+9
Add support of internal rtc on imx27. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-08ARM: dts: imx27: Adjust the GPT compatible stringFabio Estevam1-6/+6
include/soc/imx/timer.h describes well the different versions of the GPT block among the imx family: enum imx_gpt_type { GPT_TYPE_IMX1, /* i.MX1 */ GPT_TYPE_IMX21, /* i.MX21/27 */ GPT_TYPE_IMX31, /* i.MX31/35/25/37/51/6Q */ GPT_TYPE_IMX6DL, /* i.MX6DL/SX/SL */ }; So the proper compatible string for the MX27 case should be "fsl,imx21-gpt". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-14ARM: dts: imx27: only map 4 Kbyte for fec registersPhilippe Reynes1-1/+1
According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30ARM: dts: imx: Add dr_mode host setting to all host-only usb instancesMatt Porter1-0/+2
The chipidea driver adds an extra line of spam to the log when a host-only chipidea instance is left set to the default of a dual role controller. [ 2.010873] ci_hdrc ci_hdrc.1: doesn't support gadget Set the dr_mode property to host on all the host-only nodes to avoid this warning. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05ARM: dts: imx: Update VPU compatible stringsFabio Estevam1-1/+1
Update the VPU compatible strings to also use "cnm,coda<model>". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-07-18ARM: i.MX27 clk: dts: Use clock defines in DTS filesAlexander Shiyan1-41/+74
Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx27-pdk: Add keypad supportFabio Estevam1-0/+1
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx27: Place the usb phy nodes in the board dts filesFabio Estevam1-22/+0
It is not a good approach to have the USB PHY nodes inside imx27.dtsi since the USB PHYs on mx27 are not internal to the SoC. Place the USB PHY nodes in the board dts files instead. Also, each board may have a different clock source for the USB PHY, so do not hardcode it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx27: Use the correct usb clock gateFabio Estevam1-3/+3
USB Host1, Host2 and OTG are gated via 'usb_ipg_gate' clock, so fix it in order to avoid the following kernel oops: usbcore: registered new interface driver usb-storage 10024000.usb supply vbus not found, using dummy regulator Unhandled fault: external abort on non-linefetch (0x808) at 0xf4424184 Internal error: : 808 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc1-26325-g971f9fd-dirty #64 task: c7829aa0 ti: c7836000 task.ti: c7836000 PC is at ci_hdrc_probe+0x3a4/0x634 LR is at ci_hdrc_probe+0x100/0x634 pc : [<c036cc78>] lr : [<c036c9d4>] psr: 60000013 sp : c7837d48 ip : 00000001 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : c791b6c0 r7 : c7945000 r6 : f4424000 r5 : c7945010 r4 : c794e010 r3 : f4424184 r2 : 00000000 r1 : 8c000004 r0 : 0c000004 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc78361c0) Stack: (0xc7837d48 to 0xc7838000) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-30ARM: dts: imx: Add alias for ethernet controllerMarek Vasut1-0/+1
Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-04-14ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo1-0/+1
Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-02-24ARM: dts: i.MX27: Add USB nodesAlexander Shiyan1-0/+56
This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX27: Add SSI nodesAlexander Shiyan1-0/+24
This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan1-0/+2
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx27 phyCARD-S pinctrlMarkus Pargmann1-0/+1
Add pinctrl nodes and properties for phyCARD-S device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09ARM: dts: imx27 iomux device nodeMarkus Pargmann1-58/+66
This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-18ARM: imx27: add missing #pwm-cells propertySteffen Trumtrar1-0/+1
The pwm-node is missing its #pwm-cells property. The pwm-framework will complain about this. Add the missing property. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx27.dtsi: fix CSPI PER clock idGwenhael Goavec-Merou1-3/+3
CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Disable AUDMUX in the templateAlexander Shiyan1-0/+1
AUDMUX expects additional parameters to be configured correctly, so turn it off into a template. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove clock name from CPU nodeAlexander Shiyan1-1/+0
Clock name is not needed for "cpufreq-cpu0". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Increase "clock-latency" valueAlexander Shiyan1-1/+1
i.MX27 CPU can be clocked with a 32 kHz quartz, and not just 32768 Hz, so increase "clock-latency" value, which will ensure that we use two clock cycles on frequency change. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add label to CPU nodeAlexander Shiyan1-1/+1
Add a label to i.MX27 CPU node. This change allows the reuse this node in the upper levels of the DTS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove optional "ptp" clock source for FECAlexander Shiyan1-2/+2
Patch removes optional "ptp" clock source for FEC. This clock is missing in i.MX27. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Using "wdog_ipg_gate" clock source for watchdogAlexander Shiyan1-1/+1
Patch replaces "dummy" clock source for watchdog with "wdog_ipg_gate". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add core voltagesAlexander Shiyan1-3/+4
This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes is documented in the datasheet, so we add a 266 MHz frequency for conform this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add WEIM nodeAlexander Shiyan1-0/+17
This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Move IIM node under AIPI2 busAlexander Shiyan1-7/+7
This patch moves IIM node under AIPI2 bus, since this is proper location for this module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 10:31:42 +0000