summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos5410-smdk5410.dts
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25Merge tag 'samsung-dt-pinctrl-5.18' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung pinctrl DTS and driver changes for v5.18 Conversion of Samsung pinctrl bindings to dtschema followed up with alignment of DTS files to the dtschema. The entire work consists of three parts but everything should be merged at once to avoid dtschema check errors: 1. Samsung pinctrl driver change necessary to accept new DTS (driver depends on node names and this has to be adjusted because of dtschema). 2. Conversion to dtschema which brings requirement of different naming of the GPIO nodes. 3. DTS commits depending on driver (1) above, which convert all GPIO pin bank names to new naming, required by dtschema. This also includes few cleanups around DTS which are here to avoid any merge conflicts. The Samsung pinctrl driver changes are backwards compatible. However the DTS changes (renaming nodes) could cause problems in out-of-tree or other project implementations of the driver. * tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits) arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9 ARM: dts: s5pv210: align pinctrl with dtschema ARM: dts: s3c64xx: align pinctrl with dtschema ARM: dts: s3c24xx: align pinctrl with dtschema arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9 arm64: dts: exynos: align pinctrl with dtschema in Exynos7 arm64: dts: exynos: align pinctrl with dtschema in Exynos5433 ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800 ARM: dts: exynos: align pinctrl with dtschema in Exynos5410 ARM: dts: exynos: align pinctrl with dtschema in Exynos5260 ARM: dts: exynos: align pinctrl with dtschema in Exynos5250 ARM: dts: exynos: align pinctrl with dtschema in Exynos4412 ARM: dts: exynos: align pinctrl with dtschema in Exynos4210 ARM: dts: exynos: align pinctrl with dtschema in Exynos3250 ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi ARM: dts: exynos: override pins by label in Peach Pi ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit ARM: dts: exynos: override pins by label in Peach Pit ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU ... Link: https://lore.kernel.org/r/20220129115352.13274-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-01-25ARM: dts: exynos: add fake USB DWC3 supplies to SMDK5410Krzysztof Kozlowski1-0/+23
Add dummy/fake voltage regulators for USB DWC3 block on Exynos5410 SMDK5410 board. These regulators are required by dtschema, however the SMDK5410 board does not define the PMIC providing regulators. Use dummy fixed-regulators just to satisfy the dtschema checks. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220123111644.25540-11-krzysztof.kozlowski@canonical.com
2022-01-23ARM: dts: exynos: align pinctrl with dtschema in Exynos5410Krzysztof Kozlowski1-2/+2
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-9-krzysztof.kozlowski@canonical.com
2020-09-03ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410Krzysztof Kozlowski1-0/+12
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes S3C RTC and silences dtbs_check warnings like: arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-5-krzk@kernel.org
2020-01-07ARM: dts: samsung: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski1-2/+2
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-10ARM: dts: exynos: Use stdout-path property instead of console in bootargsKrzysztof Kozlowski1-1/+1
Replacing bootargs with stdout-path property in chosen node allows using early console by adding just 'earlycon' parameter to the kernel command line. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski1-5/+2
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-1/+1
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-18ARM: dts: exynos: Remove num-slots from exynos platformsShawn Lin1-2/+0
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-19Merge tag 'samsung-dt-pinctrl-4.9' of ↵Arnd Bergmann1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski: Replace in DT sources hard-coded values for pinctrl configuration like pull up/down, drive strength and function. This makes the DTS easier to read, especially that some drive strengths values are quite non-obvious. * tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250 ARM: dts: exynos: Use common macros for pinctrl configuration pinctrl: dt-bindings: samsung: Update documentation with new macros pinctrl: dt-bindings: samsung: Add header with values used for configuration
2016-09-16ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410Krzysztof Kozlowski1-5/+5
Usage of DTS macros instead of hard-coded numbers makes code easier to read. One does not have to remember which value means pull-up/down or specific driver strength. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-01ARM: dts: exynos: Add missing unit name to memory nodes in Exynos5 DTSJavier Martinez Canillas1-1/+1
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos5Javier Martinez Canillas1-0/+1
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-05-31ARM: dts: exynos: Include common exynos5 in exynos5410.dtsiKrzysztof Kozlowski1-3/+3
The exynos5.dtsi is used for common nodes shared between Exynos5250 and Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can include the common file as well to remove duplication and make everything more consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-18ARM: dts: change SROM node compatible from generic to model specificPankaj Dubey1-1/+1
This patch changes SROM nodes compatible from generic to model specific to match with binding documentation. Also updating property "samsung,srom-page-mode" as it is not defined as bool instead of int Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25ARM: dts: Add Ethernet chip to exynos5410-smdk5410Pavel Fedin1-0/+41
The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO initialization is required. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-07-21ARM: dts: Clean up indentation for exynos5410-smdk5410Andreas Faerber1-3/+3
The UART status properties are indented one level too deep, and we want to derive a device tree for the ODROID-XU. Fix this before it propagates. Signed-off-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-08-18ARM: dts: unuse the slot-node and deprecate the supports-highspeed for ↵Jaehoon Chung1-13/+5
dw-mmc in exynos dw-mmc controller can support multiple slots. But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller. And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tushar Behera <trblinux@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> [kgene.kim@samsung.com: rebased exynos5250-snow changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-31ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410Tarek Dakhran1-0/+82
Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-23 08:32:40 +0000