summaryrefslogtreecommitdiffstats
path: root/arch/arc
AgeCommit message (Collapse)AuthorFilesLines
2018-04-07kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markersMasahiro Yamada1-2/+0
GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
2018-04-06Merge branch 'work.misc' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, including Christoph's I_DIRTY patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: move I_DIRTY_INODE to fs.h ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) calls fs: fold open_check_o_direct into do_dentry_open vfs: Replace stray non-ASCII homoglyph characters with their ASCII equivalents vfs: make sure struct filename->iname is word-aligned get rid of pointless includes of fs_struct.h [poll] annotate SAA6588_CMD_POLL users
2018-04-05mm: fix races between swapoff and flush dcacheHuang Ying1-1/+1
Thanks to commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"), after swapoff the address_space associated with the swap device will be freed. So page_mapping() users which may touch the address_space need some kind of mechanism to prevent the address_space from being freed during accessing. The dcache flushing functions (flush_dcache_page(), etc) in architecture specific code may access the address_space of swap device for anonymous pages in swap cache via page_mapping() function. But in some cases there are no mechanisms to prevent the swap device from being swapoff, for example, CPU1 CPU2 __get_user_pages() swapoff() flush_dcache_page() mapping = page_mapping() ... exit_swap_address_space() ... kvfree(spaces) mapping_mapped(mapping) The address space may be accessed after being freed. But from cachetlb.txt and Russell King, flush_dcache_page() only care about file cache pages, for anonymous pages, flush_anon_page() should be used. The implementation of flush_dcache_page() in all architectures follows this too. They will check whether page_mapping() is NULL and whether mapping_mapped() is true to determine whether to flush the dcache immediately. And they will use interval tree (mapping->i_mmap) to find all user space mappings. While mapping_mapped() and mapping->i_mmap isn't used by anonymous pages in swap cache at all. So, to fix the race between swapoff and flush dcache, __page_mapping() is add to return the address_space for file cache pages and NULL otherwise. All page_mapping() invoking in flush dcache functions are replaced with page_mapping_file(). [akpm@linux-foundation.org: simplify page_mapping_file(), per Mike] Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-01Merge tag 'arc-4.15-rc4' of ↵Linus Torvalds15-29/+125
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - MCIP aka ARconnect fixes for SMP builds [Euginey] - preventive fix for SLC (L2 cache) flushing [Euginey] - Kconfig default fix [Ulf Magnusson] - trailing semicolon fixes [Luis de Bethencourt] - other assorted minor fixes * tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: setup cpu possible mask according to possible-cpus dts property ARC: mcip: update MCIP debug mask when the new cpu came online ARC: mcip: halt GFRC counter when ARC cores halt ARCv2: boot log: fix HS48 release number arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb ARC: Fix malformed ARC_EMUL_UNALIGNED default ARC: boot log: Fix trailing semicolon ARC: dw2 unwind: Fix trailing semicolon ARC: Enable fatal signals on boot for dev platforms ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
2018-02-28ARC: setup cpu possible mask according to possible-cpus dts propertyEugeniy Paltsev1-10/+40
As we have option in u-boot to set CPU mask for running linux, we want to pass information to kernel about CPU cores should be brought up. So we patch kernel dtb in u-boot to set possible-cpus property. This also allows us to have correctly setuped MCIP debug mask. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-28ARC: mcip: update MCIP debug mask when the new cpu came onlineEugeniy Paltsev1-5/+32
As of today we use hardcoded MCIP debug mask, so if we launch kernel via debugger and kick fever cores than HW has all cpus hang at the momemt of setup MCIP debug mask. So update MCIP debug mask when the new cpu came online, instead of use hardcoded MCIP debug mask. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-28ARC: mcip: halt GFRC counter when ARC cores haltEugeniy Paltsev1-0/+37
In SMP systems, GFRC is used for clocksource. However by default the counter keeps running even when core is halted (say when debugging via a JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall splat such as below: | [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done | Running with 1000 processes for 1000 objects | hrtimer: interrupt took 485060 ns | | create_cnt: 1000 | Running with 1000 processes for 1000 objects | [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU | 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0 | INFO: rcu_preempt detected stalls on CPUs/tasks: | 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0 | 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0 | 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0 | (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1) Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4 ARC cores with help of GFRC's CORE register where we set a mask for cores which state we need to rely on. We update cpu mask every time new cpu came online instead of using hardcoded one or using mask generated from "possible_cpus" as we want it set correctly even if we run kernel on HW which has fewer cores than expected (or we launch kernel via debugger and kick fever cores than HW has) Note that GFRC halts when all cores have halted and thus relies on programming of Inter-Core-dEbug register to halt all cores when one halts. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog]
2018-02-28ARCv2: boot log: fix HS48 release numberVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-25Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
2018-02-22get rid of pointless includes of fs_struct.hAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar2-2/+2
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21bug.h: work around GCC PR82365 in BUG()Arnd Bergmann1-1/+2
Looking at functions with large stack frames across all architectures led me discovering that BUG() suffers from the same problem as fortify_panic(), which I've added a workaround for already. In short, variables that go out of scope by calling a noreturn function or __builtin_unreachable() keep using stack space in functions afterwards. A workaround that was identified is to insert an empty assembler statement just before calling the function that doesn't return. I'm adding a macro "barrier_before_unreachable()" to document this, and insert calls to that in all instances of BUG() that currently suffer from this problem. The files that saw the largest change from this had these frame sizes before, and much less with my patch: fs/ext4/inode.c:82:1: warning: the frame size of 1672 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/namei.c:434:1: warning: the frame size of 904 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/super.c:2279:1: warning: the frame size of 1160 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/xattr.c:146:1: warning: the frame size of 1168 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/f2fs/inode.c:152:1: warning: the frame size of 1424 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:1195:1: warning: the frame size of 1068 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:395:1: warning: the frame size of 1084 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:298:1: warning: the frame size of 928 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:418:1: warning: the frame size of 908 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_lblcr.c:718:1: warning: the frame size of 960 bytes is larger than 800 bytes [-Wframe-larger-than=] drivers/net/xen-netback/netback.c:1500:1: warning: the frame size of 1088 bytes is larger than 800 bytes [-Wframe-larger-than=] In case of ARC and CRIS, it turns out that the BUG() implementation actually does return (or at least the compiler thinks it does), resulting in lots of warnings about uninitialized variable use and leaving noreturn functions, such as: block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:3804:1: error: control reaches end of non-void function [-Werror=return-type] include/linux/dmaengine.h: In function 'dma_maxpq': include/linux/dmaengine.h:1123:1: error: control reaches end of non-void function [-Werror=return-type] This makes them call __builtin_trap() instead, which should normally dump the stack and kill the current process, like some of the other architectures already do. I tried adding barrier_before_unreachable() to panic() and fortify_panic() as well, but that had very little effect, so I'm not submitting that patch. Vineet said: : For ARC, it is double win. : : 1. Fixes 3 -Wreturn-type warnings : : | ../net/core/ethtool.c:311:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../kernel/sched/core.c:3246:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../include/linux/sunrpc/svc_xprt.h:180:1: warning: control reaches end of : non-void function [-Wreturn-type] : : 2. bloat-o-meter reports code size improvements as gcc elides the : generated code for stack return. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 Link: http://lkml.kernel.org/r/20171219114112.939391-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Tested-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christopher Li <sparse@chrisli.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mbBartosz Golaszewski1-2/+2
Using compatible strings without the <manufacturer> part for at24 is deprecated since commit 6da28acf745f ("dt-bindings: at24: consistently document the compatible property"). Use a correct 'atmel,<model>' value. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-05ARC: Fix malformed ARC_EMUL_UNALIGNED defaultUlf Magnusson1-1/+0
'default N' should be 'default n', though they happen to have the same effect here, due to undefined symbols (N in this case) evaluating to n in a tristate sense. Remove the default from ARC_EMUL_UNALIGNED instead of changing it. bool and tristate symbols implicitly default to n. Discovered with the https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_ulfalizer_Kconfiglib_blob_master_examples_list-5Fundefined.py&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=c14YS-cH-kdhTOW89KozFhBtBJgs1zXscZojEZQ0THs&m=WxxD8ozR7QQUVzNCBksiznaisBGO_crN7PBOvAoju8s&s=1LmxsNqxwT-7wcInVpZ6Z1J27duZKSoyKxHIJclXU_M&e= script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds15-15/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-31arc: use generic_pmdp_establish as pmdp_establishKirill A. Shutemov1-0/+3
ARC doesn't support hardware dirty/accessed bits. generic_pmdp_establish() is suitable in this case. Link: http://lkml.kernel.org/r/20171213105756.69879-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-17/+7
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-30Merge branch 'siginfo-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-29Merge tag 'init_task-20180117' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull init_task initializer cleanups from David Howells: "It doesn't seem useful to have the init_task in a header file rather than in a normal source file. We could consolidate init_task handling instead and expand out various macros. Here's a series of patches that consolidate init_task handling: (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and openrisc. (2) Alter the INIT_TASK_DATA linker script macro to set init_thread_union and init_stack rather than defining these in C. Insert init_task and init_thread_into into the init_stack area in the linker script as appropriate to the configuration, with different section markers so that they end up correctly ordered. We can then get merge ia64's init_task.c into the main one. We then have a bunch of single-use INIT_*() macros that seem only to be macros because they used to be used per-arch. We can then expand these in place of the user and get rid of a few lines and a lot of backslashes. (3) Expand INIT_TASK() in place. (4) Expand in place various small INIT_*() macros that are defined conditionally. Expand them and surround them by #if[n]def/#endif in the .c file as it takes fewer lines. (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place. (6) Expand INIT_STRUCT_PID in place. These macros can then be discarded" * tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: Expand INIT_STRUCT_PID and remove Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove Expand various INIT_* macros and remove Expand INIT_TASK() in init/init_task.c and remove Construct init thread stack in the linker script rather than by union openrisc: Make THREAD_SIZE available to vmlinux.lds hexagon: Make THREAD_SIZE available to vmlinux.lds cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-25firmware: Drop FIRMWARE_IN_KERNEL Kconfig optionBenjamin Gilbert15-15/+0
It doesn't actually do anything. Merge its help text into EXTRA_FIRMWARE. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Fixes: 0946b2fb38fd ("firmware: cleanup FIRMWARE_IN_KERNEL message") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23ARC: boot log: Fix trailing semicolonLuis de Bethencourt1-1/+1
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-23ARC: dw2 unwind: Fix trailing semicolonLuis de Bethencourt1-1/+1
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-22signal: Don't use structure initializers for struct siginfoEric W. Biederman1-6/+8
The siginfo structure has all manners of holes with the result that a structure initializer is not guaranteed to initialize all of the bits. As we have to copy the structure to userspace don't even try to use a structure initializer. Instead use clear_siginfo followed by initializing selected fields. This gives a guarantee that uninitialized kernel memory is not copied to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18ARC: Enable fatal signals on boot for dev platformsAlexey Brodkin8-8/+8
It's very convenient to have fatal signals enabled on developemnt platform as this allows to catch problems that happen early in user-space (like crashing init or dynamic loader). Otherwise we may either enable it later from alive taregt console by "echo 1 > /proc/sys/kernel/print-fatal-signals" but: 1. We might be unfortunate enough to not reach working console 2. Forget to enable fatal signals and miss something interesting Given we're talking about development platforms here it shouldn't be a problem if a bit more data gets printed to debug console. Moreover this makes behavior of all our dev platforms predictable as today some platforms already have it enabled and some don't - which is way too inconvenient. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-18ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instructionAlexey Brodkin1-1/+1
As per PRM "kflag" instruction doesn't change state of L-flag ("Zero-Overhead loop disabled") in STATUS32 register so let's not act as if we can affect this bit. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-17ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-invEugeniy Paltsev1-1/+4
slc_entire_op with OP_FLUSH command also invalidates it. This is a preventive fix as the current use of slc_entire_op is only with OP_FLUSH_N_INV where the invalidate is required. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> [vgupta: fixed changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells1-3/+0
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09arc: remove CONFIG_ARC_PLAT_NEEDS_PHYS_TO_DMAChristoph Hellwig3-17/+7
We always use the stub definitions, so remove the unused other code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-05Merge tag 'arc-4.15-rc7' of ↵Linus Torvalds11-58/+57
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - platform updates for setting up clock correctly - fixes to accomodate newer gcc (__builtin_trap, removed inline asm modifier) - other fixes * tag 'arc-4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: handle gcc generated __builtin_trap for older compiler ARC: handle gcc generated __builtin_trap() ARC: uaccess: dont use "l" gcc inline asm constraint modifier ARC: [plat-axs103] refactor the quad core DT quirk code ARC: [plat-axs103]: Set initial core pll output frequency ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code ARC: [plat-hsdk]: Set initial core pll output frequency ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM arc: do not use __print_symbol() ARC: Fix detection of dual-issue enabled
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd1-1/+0
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-03ARC: handle gcc generated __builtin_trap for older compilerVineet Gupta1-0/+8
ARC gcc prior to GNU 2018.03 release didn't have a target specific __builtin_trap() implementation, generating default abort() call. Implement the abort() call - emulating what newer gcc does for the same, as suggested by Arnd. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: handle gcc generated __builtin_trap()Vineet Gupta2-0/+9
gcc toggle -fisolate-erroneous-paths-dereference (default at -O2 onwards) isolates faulty code paths such as null pointer access, divide by zero etc by emitting __builtin_trap() Newer ARC gcc generates TRAP_S 5 instruction which needs to be handled and treated like any other unexpected exception - user mode : task terminated with a SEGV - kernel mode: die() called after register and stack dump Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: uaccess: dont use "l" gcc inline asm constraint modifierVineet Gupta1-2/+3
This used to setup the LP_COUNT register automatically, but now has been removed. There was an earlier fix 3c7c7a2fc8811 which fixed instance in delay.h but somehow missed this one as gcc change had not made its way into production toolchains and was not pedantic as it is now ! Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-axs103] refactor the quad core DT quirk codeEugeniy Paltsev1-4/+6
Refactor the quad core DT quirk code: get rid of waste division and multiplication by 1000000 constant. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-axs103]: Set initial core pll output frequencyEugeniy Paltsev3-6/+18
Set initial core pll output frequency specified in device tree to 100MHz for SMP configuration and 90MHz for UP configuration. It will be applied at the core pll driver probing. Update platform quirk for decreasing core frequency for quad core configuration. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-hsdk]: Get rid of core pll frequency set in platform codeEugeniy Paltsev1-42/+0
Get rid of core pll frequency set in platform code as we set it via device tree using 'assigned-clock-rates' property. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-hsdk]: Set initial core pll output frequencyEugeniy Paltsev1-0/+8
Set initial core pll output frequency specified in device tree to 1GHz. It will be applied at the core pll driver probing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRMAlexey Brodkin1-2/+3
Currently there're 2 different implementations of the driver for DisplayLink USB2.0-to-HDMI/DVI adapters: older FBDEV and modern true DRM. We initially decided to use FBDEV version just because with it /dev/fbX is usable from user-space while in DRM version with DRM_FBDEV_EMULATION user-space cannot draw anything on a real screen, for more info read [1]. But today /dev/fbX is not that important as more and more software projects switch to use of DRI (/dev/dri/cardX). But what's even more important DRM driver allows building of complicated graphics processing chains. The most important for us is rendering of 3D on a dedicated GPU while outputting video through a simpler bitstreamer like DisplayLink. So let's use much more future-proof driver from now on. [1] https://lists.freedesktop.org/archives/dri-devel/2017-December/159519.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20arc: do not use __print_symbol()Sergey Senozhatsky1-1/+1
__print_symbol() uses extra stack space to sprintf() symbol information and then to feed that buffer to printk() char buffer[KSYM_SYMBOL_LEN]; sprint_symbol(buffer, address); printk(fmt, buffer); Replace __print_symbol() with a direct printk("%pS") call. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner1-0/+1
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-28ARC: Fix detection of dual-issue enabledAlexey Brodkin1-1/+1
As per PRM bit #0 ("D") in EXEC_CTRL enables dual-issue if set to 0, otherwise if set to 1 all instructions are executed one at a time, i.e. dual-issue is disabled. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds8-56/+136
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
2017-11-21ARC: perf: avoid vmalloc backed mmapVineet Gupta1-1/+1
For non-alising Dcache, vmalloc is not needed. vmalloc triggers additonal D-TLB Misses in the perf interrupt code path making it slightly inefficient as evident from hackbench runs below. | [ARCLinux]# perf stat -e dTLB-load-misses --repeat 5 hackbench | Running with 10*40 (== 400) tasks. | Time: 35.060 | ... | Performance counter stats for 'hackbench' (5 runs): Before: 399235 dTLB-load-misses ( +- 2.08% ) After : 397676 dTLB-load-misses ( +- 2.27% ) Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-21ARCv2: perf: optimize given that num counters <= 32Vineet Gupta1-9/+7
use ffz primitive which maps to ARCv2 instruction, vs. non atomic __test_and_set_bit It is unlikely if we will even have more than 32 counters, but still add a BUILD_BUG to catch that Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-21ARCv2: perf: tweak overflow interruptVineet Gupta1-10/+14
Current perf ISR loops thru all 32 counters, checking for each if it caused the interrupt. Instead only loop thru counters which actually interrupted (typically 1). Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-15ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet resetEugeniy Paltsev2-7/+8
DW ethernet controller on axs10x hangs sometimes after SW reset. Invoke the newly aded driver (reset-axs10x.c) by adding the DT bits. With this in place, we don't need the open-coded quirk in platform code, so get rid of it as well ! Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds2-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...