summaryrefslogtreecommitdiffstats
path: root/arch/arc/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-04-12ARC: [plat-hsdk]: fix USB regressionEugeniy Paltsev1-0/+1
As of today the CONFIG_USB isn't explicitly present in HSDK defconfig as it is implicitly forcibly enabled by UDL driver which selects CONFIG_USB in its kconfig. The commit 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB") reverse the dependencies between UDL and USB so UDL now depends on CONFIG_USB and not selects it. This introduces regression for ARC HSDK board as HSDK defconfig wasn't adjusted and now it misses USB support due to lack of CONFIG_USB enabled. Fix that. Cc: <stable@vger.kernel.org> # 5.6.x Fixes: 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-02-09ARC: Cleanup old Kconfig IO scheduler optionsKrzysztof Kozlowski4-8/+0
CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be now enabled by default (along with MQ_IOSCHED_KYBER). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-12-04Merge tag 'arc-5.5-rc1' of ↵Linus Torvalds5-176/+23
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta - Jump Label support for ARC - kmemleak enabled - arc mm backend TLB Miss / flush optimizations - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig updates and cleanups - axs platform pll / video-mode updates * tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: add kmemleak support ARC: [plat-axs10x]: remove hardcoded video mode from bootargs ARC: [plat-axs10x]: use pgu pll instead of fixed clock ARC: ARCv2: jump label: implement jump label patching ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3 ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available ARC: mm: TLB Miss optim: avoid re-reading ECR ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg ARC: nSIM_700: remove unused network options ARC: nSIM_700: switch to DW UART usage ARC: merge HAPS-HS with nSIM-HS configs ARC: HAPS: cleanup defconfigs from unused ETH drivers ARC: HAPS: add HIGHMEM memory zone to DTS ARC: HAPS: use same UART configuration everywhere ARC: HAPS: cleanup defconfigs from unused IO-related options ARC: regenerate nSIM and HAPS defconfigs
2019-12-01Merge branch 'for-linus' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull sysctl system call removal from Eric Biederman: "As far as I can tell we have reached the point where no one enables the sysctl system call anymore. It still is enabled in a few defconfigs but they are mostly the rarely used one and in asking people about that it was more cut & paste enabled than anything else. This is single commit that just deletes code. Leaving just enough code so that the deprecated sysctl warning continues to be printed. If my analysis turns out to be wrong and someone actually cares it will be easy to revert this commit and have the system call again. There was one new xtensa defconfig in linux-next that enabled the system call this cycle and when asked about it the maintainer of the code replied that it was not enabled on purpose. As of today's linux-next tree that defconfig no longer enables the system call. What we saw in the review discussion was that if we go a step farther than my patch and mess with uapi headers there are pieces of code that won't compile, but nothing minds the system call actually disappearing from the kernel" Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/ * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Remove the sysctl system call
2019-11-26sysctl: Remove the sysctl system callEric W. Biederman2-2/+0
This system call has been deprecated almost since it was introduced, and in a survey of the linux distributions I can no longer find any of them that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find that anyone might care is that a few of the defconfigs in the kernel enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414 defconfigs in the kernel, so I suspect this symbols presence is simply because it is harmless to include rather than because it is necessary. As there appear to be no users of the sysctl system call, remove the code. As this removes one of the few uses of the internal kernel mount of proc I hope this allows for even more simplifications of the proc filesystem. Cc: Alex Smith <alex.smith@imgtec.com> Cc: Anders Berg <anders.berg@lsi.com> Cc: Apelete Seketeli <apelete@seketeli.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chee Nouk Phoon <cnphoon@altera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christian Ruppert <christian.ruppert@abilis.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: Hongliang Tao <taohl@lemote.com> Cc: Hua Yan <yanh@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Jun Nie <jun.nie@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Scott Telford <stelford@cadence.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Tanmay Inamdar <tinamdar@apm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-10-28ARC: nSIM_700: remove unused network optionsEugeniy Paltsev1-2/+2
We have snps,arc-emac enabled in nSIM_700. It's obsolete and it's not used anymore so remove its device tree node and disable unused network options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: nSIM_700: switch to DW UART usageEugeniy Paltsev1-2/+6
Switch nsim_700_defconfig to dwuart for consistent uart settings for all nSIM configurations. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: merge HAPS-HS with nSIM-HS configsEugeniy Paltsev2-110/+0
Starting from nSIM 2019.06 is possible to use DW UART instead of ARC UART. That allows us to merge "nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp" with minor changes which were done in previous commits. We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig and leave haps_hs_defconfig and haps_hs_smp_defconfig which can be used on HAPS / nSIM / ZEBU / QEMU platforms without additional changes in Linux kernel. For nSIM we should now use UART property values "-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000" instead of previously used "-prop=nsim_mem-dev=uart0,base=0xc0fc1000" "use_connect" and "irq" values of UART property remains untouched. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: HAPS: cleanup defconfigs from unused ETH driversEugeniy Paltsev2-20/+2
We have multiple vendors ethernet drivers enabled in haps_hs and haps_hs_smp defconfig. The only one we possibly require is VIRTIO_NET. So disable unused ones via disabling entire CONFIG_ETHERNET which controls all vendor-specific ethernet drivers. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: HAPS: cleanup defconfigs from unused IO-related optionsEugeniy Paltsev2-12/+6
We don't have any peripherals on HAPS which may require FB or input_devices support. So get rid of them. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: regenerate nSIM and HAPS defconfigsEugeniy Paltsev5-35/+12
No functional change intended. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-boardi SPI ADC ICEugeniy Paltsev1-0/+4
HSDK board has adc108s102 SPI ADC IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-board SPI NOR flash ICEugeniy Paltsev1-0/+2
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-09-04kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARCMasahiro Yamada16-0/+16
arch/arc/Makefile overrides -O2 with -O3. This is the only user of ARCH_CFLAGS. There is no user of ARCH_CPPFLAGS or ARCH_AFLAGS. My plan is to remove ARCH_{CPP,A,C}FLAGS after refactoring the ARC Makefile. Currently, ARC has no way to enable -Wmaybe-uninitialized because both -O3 and -Os disable it. Enabling it will be useful for compile-testing. This commit allows allmodconfig (, which defaults to -O2) to enable it. Add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y to all the defconfig files in arch/arc/configs/ in order to keep the current config settings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-16Merge tag 'arc-5.3-rc1' of ↵Linus Torvalds2-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - long due rewrite of do_page_fault - refactoring of entry/exit code to utilize the double load/store instructions - hsdk platform updates * tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig ARC: [plat-hsdk]: enable DW SPI controller ARC: hide unused function unw_hdr_alloc ARC: [haps] Add Virtio support ARCv2: entry: simplify return to Delay Slot via interrupt ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause ARCv2: entry: rewrite to enable use of double load/stores LDD/STD ARCv2: entry: avoid a branch ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE ARCv2: entry: comments about hardware auto-save on taken interrupts ARC: mm: do_page_fault refactor #8: release mmap_sem sooner ARC: mm: do_page_fault refactor #7: fold the various error handling ARC: mm: do_page_fault refactor #6: error handlers to use same pattern ARC: mm: do_page_fault refactor #5: scoot no_context to end ARC: mm: do_page_fault refactor #4: consolidate retry related logic ARC: mm: do_page_fault refactor #3: tidyup vma access permission code ARC: mm: do_page_fault refactor #2: remove short lived variable ARC: mm: do_page_fault refactor #1: remove label @good_area
2019-07-08ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfigEugeniy Paltsev1-0/+2
For some reasons my previous patch "Enable AXI DW DMAC support" was applied only partially (only device tree part). So enable AXI DW DMAC in HSDK defconfig to be able to use it in verification flow. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [plat-hsdk]: enable DW SPI controllerEugeniy Paltsev1-0/+3
HSDK SoC has DW SPI controller. Enable it in preparation of enabling on-board SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [haps] Add Virtio supportAlexey Brodkin1-1/+4
As a preparation for QEMU usage for ARC let's add basic Virtio-MMIO peripherals support for the platform we're going to use. For now we add 5 Virtio slots in .dts and enable block and network devices via Virtio-MMIO. Note even though typically Virtio register set fits in 0x200 bytes we "allocate" here 0x2000 so that it matches ARC's default 8KiB page size and so remapping of that area is done clearly. We also enable DEVTMPFS automount for more convenient use of external root file-stystem. Before that we used to use built-in Initramfs which didn't automount DEVTMPFS anyways so we didn't need that option, while now it starts making sense. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-06-15kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samplesMasahiro Yamada1-0/+1
Commit 5318321d367c ("samples: disable CONFIG_SAMPLES for UML") used a big hammer to fix the build errors under the samples/ directory. Only some samples actually include uapi headers from usr/include. Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is clearer than 'depends on !UML'. If this option is enabled, uapi headers are installed before starting directory descending. I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options. This allows UML to compile some samples. $ make ARCH=um allmodconfig samples/ [ snip ] CC [M] samples/configfs/configfs_sample.o CC [M] samples/kfifo/bytestream-example.o CC [M] samples/kfifo/dma-example.o CC [M] samples/kfifo/inttype-example.o CC [M] samples/kfifo/record-example.o CC [M] samples/kobject/kobject-example.o CC [M] samples/kobject/kset-example.o CC [M] samples/trace_events/trace-events-sample.o CC [M] samples/trace_printk/trace-printk.o AR samples/vfio-mdev/built-in.a AR samples/built-in.a Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-28ARC: [plat-hsdk]: Add support of Vivante GPUEugeniy Paltsev1-1/+1
HSDK board has built-in Vivante GPU IP which works perfectly fine with Etnaviv driver, so let's use it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28ARC: [plat-hsdk]: enable creg-gpio controllerEugeniy Paltsev1-0/+1
HSDK SOC has CREG GPIO controller which can be used to control SPI chip select lines. Enable it in preparation of enabling SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-04-06block: remove CONFIG_LBDAFChristoph Hellwig8-8/+0
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit architectures. These types are required to support block device and/or file sizes larger than 2 TiB, and have generally defaulted to on for a long time. Enabling the option only increases the i386 tinyconfig size by 145 bytes, and many data structures already always use 64-bit values for their in-core and on-disk data structures anyway, so there should not be a large change in dynamic memory usage either. Dropping this option removes a somewhat weird non-default config that has cause various bugs or compiler warnings when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20Merge tag 'arc-5.1-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - unaligned access support for HS cores - Removed extra memory barrier around spinlock code - HSDK platform updates: enable dmac, reset - some more boot logging updates - misc minor fixes * tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arch: arc: Kconfig: pedantic formatting ARCv2: spinlock: remove the extra smp_mb before lock, after unlock ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access ARC: boot log: cut down on verbosity ARCv2: boot log: refurbish HS core/release identification arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM ARC: u-boot args: check that magic number is correct ARC: perf: bpok condition only exists for ARCompact ARCv2: Add explcit unaligned access support (and ability to disable too) ARCv2: lib: introduce memcpy optimized for unaligned access ARC: [plat-hsdk]: Enable AXI DW DMAC support ARC: [plat-hsdk]: Add reset controller handle to manage USB reset ARC: DTB: [scripted] fix node name and address spelling
2019-03-07configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATEDAlexey Brodkin16-16/+0
This Kconfig option was removed during v4.19 development in commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good") so there's no point to keep it in defconfigs any longer. FWIW defconfigs were patched with: --------------------------->8---------------------- find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \; --------------------------->8---------------------- Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAMCorentin Labbe1-0/+1
We have now a HSDK device in our kernelci lab, but kernel builded via the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs yet. So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARC: enable uboot support unconditionallyEugeniy Paltsev3-4/+0
After reworking U-boot args handling code and adding paranoid arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and enable uboot support unconditionally. For JTAG case we can assume that core registers will come up reset value of 0 or in worst case we rely on user passing '-on=clear_regs' to Metaware debugger. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-30ARC: change defconfig defaults to ARCv2Kevin Hilman5-0/+5
Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: <stable@vger.kernel.org> # 4.4.x Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-21arc: [devboards] Add support of NFSv3 ACLAlexey Brodkin10-0/+10
By default NFSv3 doesn't support ACL (Access Control Lists) which might be quite convenient to have so that mounted NFS behaves exactly as any other local file-system. In particular missing support of ACL makes umask useless. This among other thigs fixes Glibc's "nptl/tst-umask1". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Cupertino Miranda <cmiranda@synopsys.com> Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: [plat-hsdk] Enable DW APB GPIO supportEugeniy Paltsev1-0/+3
Enable GPIO support on HSDK. HSDK SoC includes Synopsys DesignWare DW_apb_gpio IP with 24 GPIOs mapped onto port A. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-27ARC: [plat-axs*]: Enable SWAPAlexey Brodkin3-3/+0
SWAP support on ARC was fixed earlier by commit 6e3761145a9b ("ARC: Fix CONFIG_SWAP") so now we may safely enable it on platforms that have external media like USB and SD-card. Note: it was already allowed for HSDK Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org # 6e3761145a9b: ARC: Fix CONFIG_SWAP Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-27ARC: configs: cleanupAlexey Brodkin16-28/+0
- Remove CONFIG_DEFAULT_HOSTNAME from defconfigs There's no reason to set the same hostname to all ARC boards by default. It usually gets overwritten by init scripts anyways. - Remove disabled CONFIG_DEVKMEM from defconfigs It is disabled by default Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-09ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigsAlexey Brodkin12-12/+0
We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-09ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCESAnders Roxell1-1/+0
Since commit eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed in the defconfig anymore. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds15-15/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-25firmware: Drop FIRMWARE_IN_KERNEL Kconfig optionBenjamin Gilbert15-15/+0
It doesn't actually do anything. Merge its help text into EXTRA_FIRMWARE. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Fixes: 0946b2fb38fd ("firmware: cleanup FIRMWARE_IN_KERNEL message") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRMAlexey Brodkin1-2/+3
Currently there're 2 different implementations of the driver for DisplayLink USB2.0-to-HDMI/DVI adapters: older FBDEV and modern true DRM. We initially decided to use FBDEV version just because with it /dev/fbX is usable from user-space while in DRM version with DRM_FBDEV_EMULATION user-space cannot draw anything on a real screen, for more info read [1]. But today /dev/fbX is not that important as more and more software projects switch to use of DRI (/dev/dri/cardX). But what's even more important DRM driver allows building of complicated graphics processing chains. The most important for us is rendering of 3D on a dedicated GPU while outputting video through a simpler bitstreamer like DisplayLink. So let's use much more future-proof driver from now on. [1] https://lists.freedesktop.org/archives/dri-devel/2017-December/159519.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-09ARC: [plat-hsdk] select CONFIG_RESET_HSDK from KconfigVineet Gupta1-1/+0
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-06ARC: [plat-hsdk]: Add reset controller node to manage ethernet resetEugeniy Paltsev1-0/+1
DW ethernet controller on HSDK hangs sometimes after SW reset, so add reset node to make possible to reset DW ethernet controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-03ARC: [*defconfig] Reenable soft lock-up detectorAlexey Brodkin7-7/+7
Commit 92e5aae45778 "kernel/watchdog: split up config options" introduced SOFTLOCKUP_DETECTOR which selects LOCKUP_DETECTOR instead of the latter to be selected itself. We need to adjust our defconfigs accordingly. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin1-0/+80
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-04ARC: [plat-sim] Include this platform unconditionallyVineet Gupta8-8/+0
Essentially remove CONFIG_ARC_PLAT_SIM There is no need for any platform specific code, just the board DTS match strings which we can include unconditionally Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-07-17ARC: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski2-2/+0
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06arc: vdk: Add support of UIOAlexey Brodkin1-0/+2
ARC VDK for EVSS uses UIO for communication with Embedded Vision Subsystem. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06arc: vdk: Add support of MMC controllerAlexey Brodkin1-0/+4
ARC VDK virtual platform emulates host MMC controller (DW Mobile Storage) and moreover rootfs is situated on that virtual card. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06arc: vdk: Disable halt on resetAlexey Brodkin1-2/+1
In recent VDKs ARC cores are configured as "run on reset" which made existing kernel configuration outdated to effect that slave cores never start execution of the code keeping only master online. With that fix we're again in sync with VDK platform. And while at it we regenerate defconfig via savedefconfig so default options are now excluded. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: axs10x: really enable ARC PGUAlexey Brodkin2-2/+6
Up until now we had ARC PGU not enabled in axs10x defconfigs trying to not bloat kernel image again with yet another drivers and subsystems. This change configures ARC PGU (as well as DRM bits it depends on) to be built as a module and so those who need LCD screen to work on axs10x may bundle built .ko files in their target's file-system with help of the following command on host: ------------->8------------- make INSTALL_MOD_PATH=_path_to_target_fs_ modules_install ------------->8------------- and later on target with commands as simple as: ------------->8------------- modprobe adv7511.ko modprobe arcpgu.ko ------------->8------------- get LCD working. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: rename Zebu platform support to HAPSVineet Gupta2-2/+2
There are more ARC Linux HAPS users than Zebu ones. Same kernel would work fine on both, even with embedded DT, assuming the FPGA bitfile configuration is same Suggested-by: Francois Bedard <fbedard@ynopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: timer: gfrc, rtc: build under same option (64-bit timers)Vineet Gupta2-2/+2
The original distinction was done as they were developed at different times and primarily because they are specific to UP (RTC) and SMP (GFRC). But given that driver handles that at runtime, (i.e. not allowing RTC as clocksource in SMP), we can simplify things a bit. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-31ARC: Enable PERF_EVENTS in nSIM driven platformsAlexey Brodkin6-2/+6
Now when we have properly working performance counters in nSIM even with interrupt support (fix should be a part of upcoming nSIM engineering build 2016.12-005) we may enable perf support by default for all platforms that use nSIM for ARC cores simulation. Note 1: PCT node was missing for some reason in nsimosci.dts while all other nSIM-related .dts files already had PCT node for quite some time, so adding it now. Note 2: All defconfigs were regenerated with "make savedefconfig" which led to some clean-ups in nsimosci_hs_smp_defconfig: CONFIG_FRAMEBUFFER_CONSOLE=y was removed because it is automatically selected now by DRM. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: [plat*] enables MODULE*Vineet Gupta5-1/+16
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 21:16:58 +0000