| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
Link: https://lkml.kernel.org/r/20211202123810.267175-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 5.17-rc1.
Nothing major in here, just lots of good updates and fixes, including:
- more tty core cleanups from Jiri as well as mxser driver cleanups.
This is the majority of the core diffstat
- tty documentation updates from Jiri
- platform_get_irq() updates
- various serial driver updates for new features and hardware
- fifo usage for 8250 console, reducing cpu load a lot
- LED fix for keyboards, long-time bugfix that went through many
revisions
- minor cleanups
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
serial: core: Keep mctrl register state and cached copy in sync
serial: stm32: correct loop for dma error handling
serial: stm32: fix flow control transfer in DMA mode
serial: stm32: rework TX DMA state condition
serial: stm32: move tx dma terminate DMA to shutdown
serial: pl011: Drop redundant DTR/RTS preservation on close/open
serial: pl011: Drop CR register reset on set_termios
serial: pl010: Drop CR register reset on set_termios
serial: liteuart: fix MODULE_ALIAS
serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
tty: goldfish: Use platform_get_irq() to get the interrupt
serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
tty: serial: meson: Drop the legacy compatible strings and clock code
serial: pmac_zilog: Use platform_get_irq() to get the interrupt
serial: bcm63xx: Use platform_get_irq() to get the interrupt
serial: ar933x: Use platform_get_irq() to get the interrupt
serial: vt8500: Use platform_get_irq() to get the interrupt
serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
serial: pxa: Use platform_get_irq() to get the interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
|
|
There are 4 users of mc146818_get_time() and none of them was checking
the return value from this function. Change this.
Print the appropriate warnings in callers of mc146818_get_time() instead
of in the function mc146818_get_time() itself, in order not to add
strings to rtc-mc146818-lib.c, which is kind of a library.
The callers of alpha_rtc_read_time() and cmos_read_time() may use the
contents of (struct rtc_time *) even when the functions return a failure
code. Therefore, set the contents of (struct rtc_time *) to 0x00,
which looks more sensible then 0xff and aligns with the (possibly
stale?) comment in cmos_read_time:
/*
* If pm_trace abused the RTC for storage, set the timespec to 0,
* which tells the caller that this RTC value is unusable.
*/
For consistency, do this in mc146818_get_time().
Note: hpet_rtc_interrupt() may call mc146818_get_time() many times a
second. It is very unlikely, though, that the RTC suddenly stops
working and mc146818_get_time() would consistently fail.
Only compile-tested on alpha.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-alpha@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-4-mat.jonczyk@o2.pl
|
|
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The printk header file includes ratelimit_types.h for its __ratelimit()
based usage. It is required for the static initializer used in
printk_ratelimited(). It uses a raw_spinlock_t and includes the
spinlock_types.h.
PREEMPT_RT substitutes spinlock_t with a rtmutex based implementation and so
its spinlock_t implmentation (provided by spinlock_rt.h) includes rtmutex.h and
atomic.h which leads to recursive includes where defines are missing.
By including only the raw_spinlock_t defines it avoids the atomic.h
related includes at this stage.
An example on powerpc:
| CALL scripts/atomic/check-atomics.sh
|In file included from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|arch/powerpc/include/asm/page_32.h: In function âclear_pageâ:
|arch/powerpc/include/asm/bug.h:87:4: error: implicit declaration of function â=80=98__WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 87 | __WARN(); \
| | ^~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro âWARN_ONâ=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|arch/powerpc/include/asm/bug.h:58:17: error: invalid application of âsizeofâ=99 to incomplete type âstruct bug_entryâ=99
| 58 | "i" (sizeof(struct bug_entry)), \
| | ^~~~~~
|arch/powerpc/include/asm/bug.h:89:3: note: in expansion of macro âBUG_ENTRYâ=99
| 89 | BUG_ENTRY(PPC_TLNEI " %4, 0", \
| | ^~~~~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro âWARN_ONâ=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|In file included from arch/powerpc/include/asm/ptrace.h:298,
| from arch/powerpc/include/asm/hw_irq.h:12,
| from arch/powerpc/include/asm/irqflags.h:12,
| from include/linux/irqflags.h:16,
| from include/asm-generic/cmpxchg-local.h:6,
| from arch/powerpc/include/asm/cmpxchg.h:526,
| from arch/powerpc/include/asm/atomic.h:11,
| from include/linux/atomic.h:7,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/asm-generic/bug.h:22,
| from arch/powerpc/include/asm/bug.h:109,
| from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|include/linux/thread_info.h: In function â=80=98copy_overflowâ=80=99:
|include/linux/thread_info.h:210:2: error: implicit declaration of function â=80=98WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 210 | WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
| | ^~~~
The WARN / BUG include pulls in printk.h and then ptrace.h expects WARN
(from bug.h) which is not yet complete. Even hw_irq.h has WARN_ON()
statements.
On POWERPC64 there are missing atomic64 defines while building 32bit
VDSO:
| VDSO32C arch/powerpc/kernel/vdso32/vgettimeofday.o
|In file included from include/linux/atomic.h:80,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/linux/kernel.h:19,
| from arch/powerpc/include/asm/page.h:11,
| from arch/powerpc/include/asm/vdso/gettimeofday.h:5,
| from include/vdso/datapage.h:137,
| from lib/vdso/gettimeofday.c:5,
| from <command-line>:
|include/linux/atomic-arch-fallback.h: In function âarch_atomic64_incâ=99:
|include/linux/atomic-arch-fallback.h:1447:2: error: implicit declaration of function âarch_atomic64_addâ; did you mean âarch_atomic_addâ? [-Werror=3Dimpl
|icit-function-declaration]
| 1447 | arch_atomic64_add(1, v);
| | ^~~~~~~~~~~~~~~~~
| | arch_atomic_add
The generic fallback is not included, atomics itself are not used. If
kernel.h does not include printk.h then it comes later from the bug.h
include.
Allow asm/spinlock_types.h to be included from
linux/spinlock_types_raw.h.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211129174654.668506-12-bigeasy@linutronix.de
|
|
We need the tty/serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some thread flags can be set remotely, and so even when IRQs are disabled,
the flags can change under our feet. Generally this is unlikely to cause a
problem in practice, but it is somewhat unsound, and KCSAN will
legitimately warn that there is a data race.
To avoid such issues, a snapshot of the flags has to be taken prior to
using them. Some places already use READ_ONCE() for that, others do not.
Convert them all to the new flag accessor helpers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Link: https://lore.kernel.org/r/20211129130653.2037928-5-mark.rutland@arm.com
|
|
Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remove the latter (as it is used less), so call the former in
the rest of the users.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wireup futex_waitv syscall for all remaining archs.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
Use is_kernel_text() helper to simplify code.
Link: https://lkml.kernel.org/r/20210930071143.63410-12-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
|
|
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
|
|
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
|
|
The openat2(2) syscall was added in kernel v5.6 with commit
fddb5d430ad9 ("open: introduce openat2(2) syscall").
Add the openat2(2) syscall to the audit syscall classifier.
Link: https://github.com/linux-audit/audit-kernel/issues/67
Link: https://lore.kernel.org/r/f5f1a4d8699613f8c02ce762807228c841c2e26f.1621363275.git.rgb@redhat.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[PM: merge fuzz due to previous header rename, commit line wraps]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace audit syscall class magic numbers with macros.
This required putting the macros into new header file
include/linux/audit_arch.h since the syscall macros were
included for both 64 bit and 32 bit in any compat code, causing
redefinition warnings.
Link: https://lore.kernel.org/r/2300b1083a32aade7ae7efb95826e8f3f260b1df.1621363275.git.rgb@redhat.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[PM: renamed header to audit_arch.h after consulting with Richard]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Some architectures do not include uapi/asm/socket.h
Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the previous commit (9caea0007601: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.
Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.
Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.
But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.
So move the extended-precision divide code to be a regular library
function, just like all the regular division code is. That way ie is
available regardless of math-emulation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.
This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.
There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable. That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Jensen IO functions are overly copmplicated because some of the IO
addresses refer to special 'local IO' ports, and they get accessed
differently.
That then makes gcc not actually inline them, and since they were marked
"extern inline" when included through the regular <asm/io.h> path, and
then only marked "inline" when included from sys_jensen.c, you never
necessarily got a body for the IO functions at all.
The intent of the sys_jensen.c code is to actually get the non-inlined
copy generated, so remove the 'inline' from the magic macro that is
supposed to sort this all out.
Also, do not mix 'extern inline' functions (that may or may not be
inlined and will not generate a function body if they are not) with
'static inline' (that _will_ generate a function body when not inlined).
Because gcc will complain about this situation:
error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static
because gcc basically doesn't know whether to generate a body for that
static inline function or not for that call site.
So make all of these use that __EXTERN_INLINE marker. Gcc will
generally not inline these things on use, and then generate the function
body out-of-line in sys_jensen.c.
This makes the core IO functions build for the alpha Jensen config.
Not that the rest then builds, because it turns out Jensen also doesn't
enable PCI, which then makes other drievrs very unhappy, but that's a
separate issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine. One exception is alpha. This
results in a number of compile errors such as
drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
drivers/atm/ambassador.c: In function 'do_loader_command':
drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alpha:allmodconfig fails to build with the following error
when using gcc 11.x.
arch/alpha/kernel/setup.c: In function 'setup_arch':
arch/alpha/kernel/setup.c:493:13: error:
'strcmp' reading 1 or more bytes from a region of size 0
Avoid the problem by declaring COMMAND_LINE as absolute_pointer().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
|
|
Fix all kernel-doc warnings in arch/alpha/kernel/pci-sysfs.c:
arch/alpha/kernel/pci-sysfs.c:67: warning: No description found for return value of 'pci_mmap_resource'
arch/alpha/kernel/pci-sysfs.c:115: warning: Function parameter or member 'pdev' not described in 'pci_remove_resource_files'
arch/alpha/kernel/pci-sysfs.c:115: warning: Excess function parameter 'dev' description in 'pci_remove_resource_files'
arch/alpha/kernel/pci-sysfs.c:230: warning: Function parameter or member 'pdev' not described in 'pci_create_resource_files'
arch/alpha/kernel/pci-sysfs.c:230: warning: Excess function parameter 'dev' description in 'pci_create_resource_files'
arch/alpha/kernel/pci-sysfs.c:232: warning: No description found for return value of 'pci_create_resource_files'
arch/alpha/kernel/pci-sysfs.c:305: warning: Function parameter or member 'bus' not described in 'pci_adjust_legacy_attr'
arch/alpha/kernel/pci-sysfs.c:305: warning: Excess function parameter 'b' description in 'pci_adjust_legacy_attr'
Link: https://lkml.kernel.org/r/20210808185249.31442-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Copy these macros from ia64/include/asm/agp.h to avoid the
"empty-body" in 'if' statment warning.
drivers/char/agp/generic.c: In function 'agp_generic_destroy_page':
../drivers/char/agp/generic.c:1265:42: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
1265 | unmap_page_from_agp(page);
Link: https://lkml.kernel.org/r/20210809030822.20658-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.
This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.
The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"
* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
|
|
The .map_sg() op now expects an error code instead of zero on failure.
pci_map_single_1() can fail for different reasons, but since the only
supported type of error return is DMA_MAPPING_ERROR, we coalesce those
errors into EIO.
ENOMEM is returned when no page tables can be allocated.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket
buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and
tcp_sndbuf_expand()). If we've just created a new socket this adjustment
is enabled on it, but if one changes the socket buffer size by
setsockopt(SO_{SND,RCV}BUF*) it becomes disabled.
CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on
restore as it first needs to increase buffer sizes for packet queues
restore and second it needs to restore back original buffer sizes. So
after CRIU restore all sockets become non-auto-adjustable, which can
decrease network performance of restored applications significantly.
CRIU need to be able to restore sockets with enabled/disabled adjustment
to the same state it was before dump, so let's add special setsockopt
for it.
Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so
that using these interface one can reenable automatic socket buffer
adjustment on their sockets.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull libata fixlets from Jens Axboe:
- A fix for PIO highmem (Christoph)
- Kill HAVE_IDE as it's now unused (Lukas)
* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
arch: Kconfig: clean up obsolete use of HAVE_IDE
libata: fix ata_pio_sector for CONFIG_HIGHMEM
|
|
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.
As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3ac63
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
