summaryrefslogtreecommitdiffstats
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-06-16Linux 5.2-rc5v5.2-rc5Linus Torvalds1-1/+1
2019-06-15kbuild: add support for ensuring headers are self-containedJani Nikula1-0/+1
Sometimes it's useful to be able to explicitly ensure certain headers remain self-contained, i.e. that they are compilable as standalone units, by including and/or forward declaring everything they depend on. Add special target header-test-y where individual Makefiles can add headers to be tested if CONFIG_HEADER_TEST is enabled. This will generate a dummy C file per header that gets built as part of extra-y. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: move hdr-inst shorthand to top MakefileMasahiro Yamada1-0/+2
Now that hdr-inst is used only in the top Makefile, move it there from scripts/Kbuild.include. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: re-implement Makefile.headersinst without recursionMasahiro Yamada1-4/+4
Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), the headers in uapi directories are all exported by default although exceptional cases are still allowed by the syntax 'no-export-headers'. The traditional directory descending has been kept (in a somewhat hacky way), but it is actually unneeded. Get rid of it to simplify the code. Also, handle files one by one instead of the previous per-directory processing. This will emit much more log, but I like it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: add 'headers' target to build up uapi headers in usr/includeMasahiro Yamada1-8/+15
In Linux build system, build targets and installation targets are separated. Examples are: - 'make vmlinux' -> 'make install' - 'make modules' -> 'make modules_install' - 'make dtbs' -> 'make dtbs_install' - 'make vdso' -> 'make vdso_install' The intention is to run the build targets under the normal privilege, then the installation targets under the root privilege since we need the write permission to the system directories. We have 'make headers_install' but the corresponding 'make headers' stage does not exist. The purpose of headers_install is to provide the kernel interface to C library. So, nobody would try to install headers to /usr/include directly. If 'sudo make INSTALL_HDR_PATH=/usr/include headers_install' were run, some build artifacts in the kernel tree would be owned by root because some of uapi headers are generated by 'uapi-asm-generic', 'archheaders' targets. Anyway, I believe it makes sense to split the header installation into two stages. [1] 'make headers' Process headers in uapi directories by scripts/headers_install.sh and copy them to usr/include [2] 'make headers_install' Copy '*.h' verbatim from usr/include to $(INSTALL_HDR_PATH)/include For the backward compatibility, 'headers_install' depends on 'headers'. Some samples expect uapi headers in usr/include. So, the 'headers' target is useful to build up them in the fixed location usr/include irrespective of INSTALL_HDR_PATH. Another benefit is to stop polluting the final destination with the time-stamp files '.install' and '.check'. Maybe you can see them in your toolchains. Lastly, my main motivation is to prepare for compile-testing uapi headers. To build something, we have to save an object and .*.cmd somewhere. The usr/include/ will be the work directory for that. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: build all prerequisites of headers_install simultaneouslyMasahiro Yamada1-2/+5
Currently, scripts/unifdef is compiled after scripts_basic, uapi-asm-generic, archheaders, and archscripts. The proper dependency is just scripts_basic. There is no problem to compile scripts/unifdef and other headers at the same time. Split scripts_unifdef out in order to allow more parallel building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: remove build_unifdef target in scripts/MakefileMasahiro Yamada1-1/+1
Since commit 2aedcd098a94 ("kbuild: suppress annoying "... is up to date." message"), if_changed and friends nicely suppress "is up to date" messages. We do not need per-Makefile tricks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samplesMasahiro Yamada1-4/+4
Commit 5318321d367c ("samples: disable CONFIG_SAMPLES for UML") used a big hammer to fix the build errors under the samples/ directory. Only some samples actually include uapi headers from usr/include. Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is clearer than 'depends on !UML'. If this option is enabled, uapi headers are installed before starting directory descending. I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options. This allows UML to compile some samples. $ make ARCH=um allmodconfig samples/ [ snip ] CC [M] samples/configfs/configfs_sample.o CC [M] samples/kfifo/bytestream-example.o CC [M] samples/kfifo/dma-example.o CC [M] samples/kfifo/inttype-example.o CC [M] samples/kfifo/record-example.o CC [M] samples/kobject/kobject-example.o CC [M] samples/kobject/kset-example.o CC [M] samples/trace_events/trace-events-sample.o CC [M] samples/trace_printk/trace-printk.o AR samples/vfio-mdev/built-in.a AR samples/built-in.a Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: make gdb_script depend on prepare0 instead of prepareMasahiro Yamada1-1/+1
'gdb_script' needs headers generated by ./Kbuild, which is visited by 'prepare0'. None of 'gdb_script' depends on 'prepare'. Loosen the dependency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: remove stale dependency between Documentation/ and headers_installMasahiro Yamada1-2/+1
Commit 8e2faea877eb ("Make Documenation depend on headers_install") dates back to 2014, which is before Sphinx was introduced for the kernel documentation. Since none of DOC_TARGET requires headers_install, it is strange to run it only for the single target "Documentation/". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15kbuild: remove headers_{install,check}_allMasahiro Yamada1-13/+2
headers_install_all does not make much sense any more because different architectures export different set of uapi/linux/ headers. As you see in include/uapi/linux/Kbuild, the installation of a.out.h, kvm.h, and kvm_para.h is arch-dependent. So, headers_install_all repeats the installation/removal of them. If somebody really thinks it is useful to do headers_install for all architectures, it would be possible by small shell-scripting, but the top Makefile does not have to provide entry targets just for that purpose. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-06-08Linux 5.2-rc4v5.2-rc4Linus Torvalds1-1/+1
2019-06-05kbuild: teach kselftest-merge to find nested config filesDan Rue1-3/+2
Current implementation of kselftest-merge only finds config files that are one level deep using `$(srctree)/tools/testing/selftests/*/config`. Often, config files are added in nested directories, and do not get picked up by kselftest-merge. Use `find` to catch all config files under `$(srctree)/tools/testing/selftests` instead. Signed-off-by: Dan Rue <dan.rue@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-02Linux 5.2-rc3v5.2-rc3Linus Torvalds1-1/+1
2019-05-26Linux 5.2-rc2v5.2-rc2Linus Torvalds1-2/+2
2019-05-19Linux 5.2-rc1v5.2-rc1Linus Torvalds1-2/+2
2019-05-18kbuild: check uniqueness of module namesMasahiro Yamada1-0/+1
In the recent build test of linux-next, Stephen saw a build error caused by a broken .tmp_versions/*.mod file: https://lkml.org/lkml/2019/5/13/991 drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same basename, and there is a race in generating .tmp_versions/asix.mod Kbuild has not checked this before, and it suddenly shows up with obscure error messages when this kind of race occurs. Non-unique module names cause various sort of problems, but it is not trivial to catch them by eyes. Hence, this script. It checks not only real modules, but also built-in modules (i.e. controlled by tristate CONFIG option, but currently compiled with =y). Non-unique names for built-in modules also cause problems because /sys/modules/ would fall over. For the latest kernel, I tested "make allmodconfig all" (or more quickly "make allyesconfig modules"), and it detected the following: warning: same basename if the following are built as modules: drivers/regulator/88pm800.ko drivers/mfd/88pm800.ko warning: same basename if the following are built as modules: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko warning: same basename if the following are built as modules: drivers/net/phy/asix.ko drivers/net/usb/asix.ko warning: same basename if the following are built as modules: fs/coda/coda.ko drivers/media/platform/coda/coda.ko warning: same basename if the following are built as modules: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-05-18kbuild: add LICENSES to KBUILD_ALLDIRSMasahiro Yamada1-1/+1
For *-pkg targets, the LICENSES directory should be included in the source tarball. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: terminate Kconfig when $(CC) or $(LD) is missingMasahiro Yamada1-1/+1
If the compiler specified by $(CC) is not present, the Kconfig stage sprinkles 'not found' messages, then succeeds. $ make CROSS_COMPILE=foo defconfig /bin/sh: 1: foogcc: not found /bin/sh: 1: foogcc: not found *** Default configuration is based on 'x86_64_defconfig' ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found init/Kconfig:16:warning: 'GCC_VERSION': number is invalid # # configuration written to .config # Terminate parsing files immediately if $(CC) or $(LD) is not found. "make *config" will fail more nicely. $ make CROSS_COMPILE=foo defconfig *** Default configuration is based on 'x86_64_defconfig' scripts/Kconfig.include:34: compiler 'foogcc' not found make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1 make: *** [Makefile;557: defconfig] Error 2 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: turn auto.conf.cmd into a mandatory include fileMasahiro Yamada1-1/+1
syncconfig is responsible for keeping auto.conf up-to-date, so if it fails for any reason, the build must be terminated immediately. However, since commit 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing"), Kbuild continues running even after syncconfig fails. You can confirm this by intentionally making syncconfig error out: diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 08ba146..307b9de 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -1023,6 +1023,9 @@ int conf_write_autoconf(int overwrite) FILE *out, *tristate, *out_h; int i; + if (overwrite) + return 1; + if (!overwrite && is_present(autoconf_name)) return 0; Then, syncconfig fails, but Make would not stop: $ make -s mrproper allyesconfig defconfig $ make scripts/kconfig/conf --syncconfig Kconfig *** Error during sync of the configuration. make[2]: *** [scripts/kconfig/Makefile;69: syncconfig] Error 1 make[1]: *** [Makefile;557: syncconfig] Error 2 make: *** [include/config/auto.conf.cmd] Deleting file 'include/config/tristate.conf' make: Failed to remake makefile 'include/config/auto.conf'. SYSTBL arch/x86/include/generated/asm/syscalls_32.h SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h SYSTBL arch/x86/include/generated/asm/syscalls_64.h [ continue running ... ] The reason is in the behavior of a pattern rule with multi-targets. %/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig GNU Make knows this rule is responsible for making all the three files simultaneously. As far as examined, auto.conf.cmd is the target in question when this rule is invoked. It is probably because auto.conf.cmd is included below the inclusion of auto.conf. The inclusion of auto.conf is mandatory, while that of auto.conf.cmd is optional. GNU Make does not care about the failure in the process of updating optional include files. I filed this issue (https://savannah.gnu.org/bugs/?56301) in case this behavior could be improved somehow in future releases of GNU Make. Anyway, it is quite easy to fix our Makefile. Given that auto.conf is already a mandatory include file, there is no reason to stick auto.conf.cmd optional. Make it mandatory as well. Cc: linux-stable <stable@vger.kernel.org> # 5.0+ Fixes: 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: add all Clang-specific flags unconditionallyMasahiro Yamada1-5/+5
We do not support old Clang versions. Upgrade your clang version if any of these flags is unsupported. Let's add all flags inside ifdef CONFIG_CC_IS_CLANG unconditionally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-18kbuild: Don't try to add '-fcatch-undefined-behavior' flagNathan Chancellor1-1/+0
This is no longer a valid option in clang, it was removed in 3.5, which we don't support. https://github.com/llvm/llvm-project/commit/cb3f812b6b9fab8f3b41414f24e90222170417b4 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: add -Wvla flag unconditionallyMasahiro Yamada1-1/+1
This flag is documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option switch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-18kbuild: re-enable int-in-bool-context warningMasahiro Yamada1-1/+0
This warning was disabled by commit bd664f6b3e37 ("disable new gcc-7.1.1 warnings for now") just because it was too noisy. Thanks to Arnd Bergmann, all warnings have been fixed. Now, we are ready to re-enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-05-08Merge tag 'kbuild-v5.2' of ↵Linus Torvalds1-65/+81
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - allow users to invoke 'make' out of the source tree - refactor scripts/mkmakefile - deprecate KBUILD_SRC, which was used to track the source tree location for O= build. - fix recordmcount.pl in case objdump output is localized - turn unresolved symbols in external modules to errors from warnings by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings - generate modules.builtin.modinfo to collect .modinfo data from built-in modules - misc Makefile cleanups * tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) .gitignore: add more all*.config patterns moduleparam: Save information about built-in modules in separate file Remove MODULE_ALIAS() calls that take undefined macro .gitignore: add leading and trailing slashes to generated directories scripts/tags.sh: fix direct execution of scripts/tags.sh scripts: override locale from environment when running recordmcount.pl samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option kbuild: move Documentation to vmlinux-alldirs kbuild: move samples/ to KBUILD_VMLINUX_OBJS modpost: make KBUILD_MODPOST_WARN also configurable for external modules kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build kbuild: remove unneeded dependency for include/config/kernel.release memory: squash drivers/memory/Makefile.asm-offsets kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build kbuild: mkmakefile: generate a simple wrapper of top Makefile kbuild: mkmakefile: do not check the generated Makefile marker kbuild: allow Kbuild to start from any directory kbuild: pass $(MAKECMDGOALS) to sub-make as is kbuild: fix warning "overriding recipe for target 'Makefile'" ...
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+2
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'meminit-v5.2-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull compiler-based variable initialization updates from Kees Cook: "This is effectively part of my gcc-plugins tree, but as this adds some Clang support, it felt weird to still call it "gcc-plugins". :) This consolidates Kconfig for the existing stack variable initialization (via structleak and stackleak gcc plugins) and adds Alexander Potapenko's support for Clang's new similar functionality. Summary: - Consolidate memory initialization Kconfigs (Kees) - Implement support for Clang's stack variable auto-init (Alexander)" * tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: security: Implement Clang's stack initialization security: Move stackleak config to Kconfig.hardening security: Create "kernel hardening" config area
2019-05-07Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - livepatching kselftests improvements from Joe Lawrence and Miroslav Benes - making use of gcc's -flive-patching option when available, from Miroslav Benes - kobject handling cleanups, from Petr Mladek * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove duplicated code for early initialization livepatch: Remove custom kobject state handling livepatch: Convert error about unsupported reliable stacktrace into a warning selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled selftests/livepatch: use TEST_PROGS for test scripts
2019-05-07moduleparam: Save information about built-in modules in separate fileAlexey Gladkov1-0/+2
Problem: When a kernel module is compiled as a separate module, some important information about the kernel module is available via .modinfo section of the module. In contrast, when the kernel module is compiled into the kernel, that information is not available. Information about built-in modules is necessary in the following cases: 1. When it is necessary to find out what additional parameters can be passed to the kernel at boot time. 2. When you need to know which module names and their aliases are in the kernel. This is very useful for creating an initrd image. Proposal: The proposed patch does not remove .modinfo section with module information from the vmlinux at the build time and saves it into a separate file after kernel linking. So, the kernel does not increase in size and no additional information remains in it. Information is stored in the same format as in the separate modules (null-terminated string array). Because the .modinfo section is already exported with a separate modules, we are not creating a new API. It can be easily read in the userspace: $ tr '\0' '\n' < modules.builtin.modinfo ext4.softdep=pre: crc32c ext4.license=GPL ext4.description=Fourth Extended Filesystem ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others ext4.alias=fs-ext4 ext4.alias=ext3 ext4.alias=fs-ext3 ext4.alias=ext2 ext4.alias=fs-ext2 md_mod.alias=block-major-9-* md_mod.alias=md md_mod.description=MD RAID framework md_mod.license=GPL md_mod.parmtype=create_on_open:bool md_mod.parmtype=start_dirty_degraded:int ... Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-05Linux 5.1v5.1Linus Torvalds1-1/+1
2019-05-03kbuild: move Documentation to vmlinux-alldirsMasahiro Yamada1-4/+5
A minor code cleanup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-03kbuild: move samples/ to KBUILD_VMLINUX_OBJSMasahiro Yamada1-10/+8
Handle samples/ like the other top-level directories to simplify the Makefile. Include include/config/auto.conf earlier to evaluate drivers-$(CONFIG_SAMPLES). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01gcc-9: silence 'address-of-packed-member' warningLinus Torvalds1-1/+1
We already did this for clang, but now gcc has that warning too. Yes, yes, the address may be unaligned. And that's kind of the point. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-28Linux 5.1-rc7v5.1-rc7Linus Torvalds1-1/+1
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24security: Implement Clang's stack initializationKees Cook1-0/+5
CONFIG_INIT_STACK_ALL turns on stack initialization based on -ftrivial-auto-var-init in Clang builds, which has greater coverage than CONFIG_GCC_PLUGINS_STRUCTLEAK_BYREF_ALL. -ftrivial-auto-var-init Clang option provides trivial initializers for uninitialized local variables, variable fields and padding. It has three possible values: pattern - uninitialized locals are filled with a fixed pattern (mostly 0xAA on 64-bit platforms, see https://reviews.llvm.org/D54604 for more details, but 0x000000AA for 32-bit pointers) likely to cause crashes when uninitialized value is used; zero (it's still debated whether this flag makes it to the official Clang release) - uninitialized locals are filled with zeroes; uninitialized (default) - uninitialized locals are left intact. This patch uses only the "pattern" mode when CONFIG_INIT_STACK_ALL is enabled. Developers have the possibility to opt-out of this feature on a per-variable basis by using __attribute__((uninitialized)), but such use should be well justified in comments. Co-developed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Alexander Potapenko <glider@google.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-21Linux 5.1-rc6v5.1-rc6Linus Torvalds1-1/+1
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14Linux 5.1-rc5v5.1-rc5Linus Torvalds1-1/+1
2019-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+2
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-12 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Improve BPF verifier scalability for large programs through two optimizations: i) remove verifier states that are not useful in pruning, ii) stop walking parentage chain once first LIVE_READ is seen. Combined gives approx 20x speedup. Increase limits for accepting large programs under root, and add various stress tests, from Alexei. 2) Implement global data support in BPF. This enables static global variables for .data, .rodata and .bss sections to be properly handled which allows for more natural program development. This also opens up the possibility to optimize program workflow by compiling ELFs only once and later only rewriting section data before reload, from Daniel and with test cases and libbpf refactoring from Joe. 3) Add config option to generate BTF type info for vmlinux as part of the kernel build process. DWARF debug info is converted via pahole to BTF. Latter relies on libbpf and makes use of BTF deduplication algorithm which results in 100x savings compared to DWARF data. Resulting .BTF section is typically about 2MB in size, from Andrii. 4) Add BPF verifier support for stack access with variable offset from helpers and add various test cases along with it, from Andrey. 5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header so that L2 encapsulation can be used for tc tunnels, from Alan. 6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that users can define a subset of allowed __sk_buff fields that get fed into the test program, from Stanislav. 7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up various UBSAN warnings in bpftool, from Yonghong. 8) Generate a pkg-config file for libbpf, from Luca. 9) Dump program's BTF id in bpftool, from Prashant. 10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP program, from Magnus. 11) kallsyms related fixes for the case when symbols are not present in BPF selftests and samples, from Daniel ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree buildMasahiro Yamada1-2/+4
After cross-compiling the kernel, "make mrproper" should be executed with the proper ARCH= option. Otherwise, stale objects will remain under arch/$(SRCARCH)/. One bad scenario is like this: $ make ARCH=arm defconfig all # cross-compile the kernel for arm $ make mrproper # mrproper for host-arch (i.e. x86) $ make ARCH=arm O=build_dir defconfig all If you miss ARCH= for mrproper and cross-compile the kernel with O= and ARCH= options, Kbuild will happily start to build, but may fail due to stale objects in the srctree. If $(srctree)/arch/$(SRCARCH)/include/generated/ exists, let's stop the out-of-tree build. To detect this, mrproper should clean only arch/$(SRCARCH)/include/generated/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-09kbuild: remove unneeded dependency for include/config/kernel.releaseMasahiro Yamada1-1/+1
This is unneeded since commit 43fee2b23895 ("kbuild: do not redirect the first prerequisite for filechk"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-08kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabledMiroslav Benes1-0/+4
GCC 9 introduces a new option, -flive-patching. It disables certain optimizations which could make a compilation unsafe for later live patching of the running kernel. The option is used only if CONFIG_LIVEPATCH is enabled and $(CC) supports it. Performance impact of the option was measured on three different Intel machines - two bigger NUMA boxes and one smaller UMA box. Kernel intensive (IO, scheduling, networking) benchmarks were selected, plus a set of HPC workloads from NAS Parallel Benchmark. The tests were done on upstream kernel 5.0-rc8 with openSUSE Leap 15.0 userspace. The majority of the tests is unaffected. The only significant exception is the scheduler section which suffers 1-3% degradation. Evaluated-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-07Linux 5.1-rc4v5.1-rc4Linus Torvalds1-1/+1
2019-04-03kbuild: add ability to generate BTF type info for vmlinuxAndrii Nakryiko1-1/+2
This patch adds new config option to trigger generation of BTF type information from DWARF debuginfo for vmlinux and kernel modules through pahole, which in turn relies on libbpf for btf_dedup() algorithm. The intent is to record compact type information of all types used inside kernel, including all the structs/unions/typedefs/etc. This enables BPF's compile-once-run-everywhere ([0]) approach, in which tracing programs that are inspecting kernel's internal data (e.g., struct task_struct) can be compiled on a system running some kernel version, but would be possible to run on other kernel versions (and configurations) without recompilation, even if the layout of structs changed and/or some of the fields were added, removed, or renamed. This is only possible if BPF loader can get kernel type info to adjust all the offsets correctly. This patch is a first time in this direction, making sure that BTF type info is part of Linux kernel image in non-loadable ELF section. BTF deduplication ([1]) algorithm typically provides 100x savings compared to DWARF data, so resulting .BTF section is not big as is typically about 2MB in size. [0] http://vger.kernel.org/lpc-bpf2018.html#session-2 [1] https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-02kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree buildMasahiro Yamada1-3/+3
KBUILD_SRC was conventionally used for some different purposes: [1] To remember the source tree path [2] As a flag to check if sub-make is already done [3] As a flag to check if Kbuild runs out of tree For [1], we do not need to remember it because the top Makefile can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST)))) [2] has been replaced with self-commenting 'sub_make_done'. For [3], we can distinguish in-tree/out-of-tree by comparing $(srctree) and '.' This commit converts [3] to prepare for the KBUILD_SRC removal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-02kbuild: allow Kbuild to start from any directoryMasahiro Yamada1-37/+50
Kbuild always runs in the top of the output directory. If Make starts in the source directory with O=, it relocates the working directory to the location specified by O=. Also, users can start build from the output directory by using the Makefile generated by scripts/mkmakefile. With a little more effort, Kbuild will be able to start from any directory path. This commit allows to specify the source directory by using the -f option. For example, you can do: $ cd path/to/output/dir $ make -f path/to/source/dir/Makefile Or, for the equivalent behavior, you can do: $ make O=path/to/output/dir -f path/to/source/dir/Makefile KBUILD_SRC is now deprecated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kbingham@kernel.org>
2019-04-01kbuild: pass $(MAKECMDGOALS) to sub-make as isMasahiro Yamada1-1/+1
Manipulating $(MAKECMDGOALS) for sub-make seems odd to me. [1] 'make O=foo sub-make' is turned into 'make O=foo', which builds the default targets. It would make sense to terminate the build with: *** No rule to make target 'sub-make'. Stop. [2] 'make O=foo defconfig _all' is turned into 'make O=foo defconfig', which changes the behavior. Let's pass $(MAKECMDGOALS) as is. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-01kbuild: fix warning "overriding recipe for target 'Makefile'"Masahiro Yamada1-1/+1
If you do "make Makefile" with GNU Make 3.x, the following warning is displayed: $ make Makefile Makefile:165: warning: overriding recipe for target 'Makefile' Makefile:51: warning: ignoring old recipe for target 'Makefile' make[1]: Nothing to be done for 'Makefile'. make: Nothing to be done for 'Makefile'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 14:04:30 +0000