summaryrefslogtreecommitdiffstats
path: root/MAINTAINERS
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Merge tag 'please-pull-for_5.3' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Tony Luck: "All the bits that Boris had queued in his tree plus four patches to add support for Intel Icelake Xeon and then fix a few corner cases" * tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec EDAC, skx, i10nm: Fix source ID register offset EDAC, i10nm: Check ECC enabling status per channel EDAC, i10nm: Add Intel additional Ice-Lake support EDAC: Make edac_debugfs_create_x*() return void EDAC/aspeed: Remove set but not used variable 'np' EDAC/ie31200: Reformat PCI device table EDAC/ie31200: Add Intel Coffee Lake CPU support EDAC/sifive: Add EDAC platform driver for SiFive SoCs EDAC/sb_edac: Remove redundant update of tad_base arm64: dts: stratix10: Add SDMMC EDAC node EDAC/altera: Add Stratix10 SDMMC support arm64: dts: stratix10: Add OCRAM EDAC node EDAC/altera: Add Stratix10 OCRAM ECC support EDAC/sysfs: Drop device references properly EDAC/sysfs: Fix memory leak when creating a csrow object
2019-07-09Merge tag 'spi-v5.3' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "For the most part this is a quiet release for SPI, though there's several of the more widely used drivers that have had some fairly substantial development done on them, mainly improving performance and adding support for some more obscure use cases. Summary: - Support for configuring a minimum time for chip select to be deasserted between transfers from Martin Sperl. - A rework of the ACPI device instantiation code from Ard Biesheuvel. - Fairly substantial development on the AT91 USART, BCM2835 and Tegra114 drivers. - New driver for Socionext SynQuacer" * tag 'spi-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits) spi: pxa2xx: Add support for Intel Elkhart Lake spi: atmel-quadspi: fix resume call spi: atmel-quadspi: void return type for atmel_qspi_init() spi: pxa2xx: Set minimum transfer speed spi: stm32-qspi: remove signal sensitive on completion dt-bindings: spi: stm32-qspi: add dma properties spi: uniphier: fix zero-length transfer spi: uniphier: fix timeout error spi/acpi: avoid spurious matches during slave enumeration spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage spi: fix ctrl->num_chipselect constraint spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series spi/acpi: fix incorrect ACPI parent check spi: don't open code list_for_each_entry_safe_reverse() spi: No need to assign dummy value in spi_unregister_controller() spi: Add a prototype for exported spi_set_cs_timing() spi/acpi: enumerate all SPI slaves in the namespace spi: qup: fix PIO/DMA transfers. spi: Use struct_size() helper spi: mediatek: add SPI_LSB_FIRST support ...
2019-07-09Merge tag 'regulator-v5.3' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of new features in the core, the most interesting one being support for complex regulator coupling configurations initially targeted at nVidia Tegra SoCs, and some new drivers but otherwise quite a quiet release. Summary: - Core support for gradual ramping of voltages for devices that can't manage large changes in hardware from Bartosz Golaszewski. - Core support for systems that have complex coupling requirements best described via code, contributed by Dmitry Osipenko. - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST Microelectronics STM32-Booster" * tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: max77650: use vsel_step regulator: implement selector stepping regulator: max77650: add MODULE_ALIAS() regulator: max77620: remove redundant assignment to variable ret dt-bindings: regulator: add support for the stm32-booster regulator: add support for the stm32-booster regulator: s2mps11: Adjust supported buck voltages to real values regulator: s2mps11: Fix buck7 and buck8 wrong voltages gpio: Fix return value mismatch of function gpiod_get_from_of_node() regulator: core: Expose some of core functions needed by couplers regulator: core: Introduce API for regulators coupling customization regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend regulator: s2mps11: Reduce number of rdev_get_id() calls regulator: qcom_spmi: Do NULL check for lvs regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel regulator: da9061/62: Adjust LDO voltage selection minimum value regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure regulator: qcom_spmi: add PMS405 SPMI regulator dt-bindings: qcom_spmi: Document pms405 support arm64: dts: msm8998-mtp: Add pm8005_s1 regulator ...
2019-07-09Merge tag 'leds-for-5.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
2019-07-08Merge branch 'for-5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Documentation updates and the addition of cgroup_parse_float() which will be used by new controllers including blk-iocost" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: convert docs to ReST and rename to *.rst cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS cgroup: add cgroup_parse_float()
2019-07-08Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.hMichael Kelley1-0/+1
Break out parts of mshyperv.h that are ISA independent into a separate file in include/asm-generic. This move facilitates ARM64 code reusing these definitions and avoids code duplication. No functionality or behavior is changed. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-08MAINTAINERS: Add page_pool maintainer entryJesper Dangaard Brouer1-0/+8
In this release cycle the number of NIC drivers using page_pool will likely reach 4 drivers. It is about time to add a maintainer entry. Add myself and Ilias. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge tag 'blk-dim-v2' into rdma.git for-nextJason Gunthorpe1-1/+2
Generic DIM From: Tal Gilboa and Yamin Fridman Implement net DIM over a generic DIM library, add RDMA DIM dim.h lib exposes an implementation of the DIM algorithm for dynamically-tuned interrupt moderation for networking interfaces. We want a similar functionality for other protocols, which might need to optimize interrupts differently. Main motivation here is DIM for NVMf storage protocol. Current DIM implementation prioritizes reducing interrupt overhead over latency. Also, in order to reduce DIM's own overhead, the algorithm might take some time to identify it needs to change profiles. While this is acceptable for networking, it might not work well on other scenarios. Here we propose a new structure to DIM. The idea is to allow a slightly modified functionality without the risk of breaking Net DIM behavior for netdev. We verified there are no degradations in current DIM behavior with the modified solution. Suggested solution: - Common logic is implemented in lib/dim/dim.c - Net DIM (existing) logic is implemented in lib/dim/net_dim.c, which uses the common logic in dim.c - Any new DIM logic will be implemented in "lib/dim/new_dim.c". This new implementation will expose modified versions of profiles, dim_step() and dim_decision(). - DIM API is declared in include/linux/dim.h for all implementations. Pros for this solution are: - Zero impact on existing net_dim implementation and usage - Relatively more code reuse (compared to two separate solutions) - Increased extensibility Required for dependencies in the next series. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CPU feature updates from Thomas Gleixner: "Updates for x86 CPU features: - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR instructions in user space to save power e.g. in HPC workloads which spin wait on synchronization points. The maximum time a MWAIT can halt in userspace is controlled by the kernel and can be adjusted by the sysadmin. - Speed up the MTRR handling code on CPUs which support cache self-snooping correctly. On those CPUs the wbinvd() invocations can be omitted which speeds up the MTRR setup by a factor of 50. - Support for the new x86 vendor Zhaoxin who develops processors based on the VIA Centaur technology. - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs by sending IPIs to retrieve the CPU frequency and use the cached values instead. - The addition and late revert of the FSGSBASE support. The revert was required as it turned out that the code still has hard to diagnose issues. Yet another engineering trainwreck... - Small fixes, cleanups, improvements and the usual new Intel CPU family/model addons" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/fsgsbase: Revert FSGSBASE support selftests/x86/fsgsbase: Fix some test case bugs x86/entry/64: Fix and clean up paranoid_exit x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled selftests/x86: Test SYSCALL and SYSENTER manually with TF set x86/mtrr: Skip cache flushes on CPUs with cache self-snooping x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata Documentation/ABI: Document umwait control sysfs interfaces x86/umwait: Add sysfs interface to control umwait maximum time x86/umwait: Add sysfs interface to control umwait C0.2 state x86/umwait: Initialize umwait control values x86/cpufeatures: Enumerate user wait instructions x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3 ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC x86/cpu: Create Zhaoxin processors architecture support file x86/cpu: Split Tremont based Atoms from the rest Documentation/x86/64: Add documentation for GS/FS addressing mode x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit ...
2019-07-08Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer and timekeeping departement delivers: Core: - The consolidation of the VDSO code into a generic library including the conversion of x86 and ARM64. Conversion of ARM and MIPS are en route through the relevant maintainer trees and should end up in 5.4. This gets rid of the unnecessary different copies of the same code and brings all architectures on the same level of VDSO functionality. - Make the NTP user space interface more robust by restricting the TAI offset to prevent undefined behaviour. Includes a selftest. - Validate user input in the compat settimeofday() syscall to catch invalid values which would be turned into valid values by a multiplication overflow - Consolidate the time accessors - Small fixes, improvements and cleanups all over the place Drivers: - Support for the NXP system counter, TI davinci timer - Move the Microsoft HyperV clocksource/events code into the drivers/clocksource directory so it can be shared between x86 and ARM64. - Overhaul of the Tegra driver - Delay timer support for IXP4xx - Small fixes, improvements and cleanups as usual" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) time: Validate user input in compat_settimeofday() timer: Document TIMER_PINNED clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic clocksource/drivers: Make Hyper-V clocksource ISA agnostic MAINTAINERS: Fix Andy's surname and the directory entries of VDSO hrtimer: Use a bullet for the returns bullet list arm64: vdso: Fix compilation with clang older than 8 arm64: compat: Fix __arch_get_hw_counter() implementation arm64: Fix __arch_get_hw_counter() implementation lib/vdso: Make delta calculation work correctly MAINTAINERS: Add entry for the generic VDSO library arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system arm64: vdso: Remove unnecessary asm-offsets.c definitions vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h clocksource/drivers/davinci: Add support for clocksource clocksource/drivers/davinci: Add support for clockevents clocksource/drivers/tegra: Set up maximum-ticks limit properly clocksource/drivers/tegra: Cycles can't be 0 clocksource/drivers/tegra: Restore base address before cleanup clocksource/drivers/tegra: Add verbose definition for 1MHz constant ...
2019-07-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...
2019-07-08Merge tag 's390-5.3-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Improve stop_machine wait logic: replace cpu_relax_yield call in generic stop_machine function with a weak stop_machine_yield function. This is overridden on s390, which yields the current cpu to the neighbouring cpu after a couple of retries, instead of blindly giving up the cpu to the hipervisor. This significantly improves stop_machine performance on s390 in overcommitted scenarios. This includes common code changes which have been Acked by Peter Zijlstra and Thomas Gleixner. - Improve jump label transformation speed: transform jump labels without using stop_machine. - Refactoring of the vfio-ccw cp handling, simplifying the code and avoiding unneeded allocating/copying. - Various vfio-ccw fixes (ccw translation, state machine). - Add support for vfio-ap queue interrupt control in the guest. This includes s390 kvm changes which have been Acked by Christian Borntraeger. - Add protected virtualization support for virtio-ccw. - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some code which most likely isn't working at all, besides that s390 didn't even compile for !CONFIG_SMP. - Support for special flagged EP11 CPRBs for zcrypt. - Handle PCI devices with no support for new MIO instructions. - Avoid KASAN false positives in reworked stack unwinder. - Couple of fixes for the QDIO layer. - Convert s390 specific documentation to ReST format. - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is missing. This way our modules behave like most other modules and which is also what systemd's systemd-modules-load.service expects. - Replace defconfig with performance_defconfig, so there is one config file less to maintain. - Remove the SCLP call home device driver, which was never useful. - Cleanups all over the place. * tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) docs: s390: s390dbf: typos and formatting, update crash command docs: s390: unify and update s390dbf kdocs at debug.c docs: s390: restore important non-kdoc parts of s390dbf.rst vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1 s390/pci: correctly handle MIO opt-out s390/pci: deal with devices that have no support for MIO instructions s390: ap: kvm: Enable PQAP/AQIC facility for the guest s390: ap: implement PAPQ AQIC interception in kernel vfio: ap: register IOMMU VFIO notifier s390: ap: kvm: add PQAP interception for AQIC s390/unwind: cleanup unused READ_ONCE_TASK_STACK s390/kasan: avoid false positives during stack unwind s390/qdio: don't touch the dsci in tiqdio_add_input_queues() s390/qdio: (re-)initialize tiqdio list entries s390/dasd: Fix a precision vs width bug in dasd_feature_list() s390/cio: introduce driver_override on the css bus vfio-ccw: make convert_ccw0_to_ccw1 static vfio-ccw: Remove copy_ccw_from_iova() vfio-ccw: Factor out the ccw0-to-ccw1 transition vfio-ccw: Copy CCW data outside length calculation ...
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-07-08MAINTAINERS: maintain drm/arm drivers in drm-misc for nowDaniel Vetter1-2/+2
From discussions with Liviu it sounded like the komeda team would benefit a bit from more cross-review with other drivers. To make sure komeda is aligned with how similar problems are solved in other drivers (in the end everyone ends up with similar ideas on how to solve various display engine design issues). An option would be to use drm-misc as an incubator for a few kernel releases, at least until the big design items have been tackled: Aside from the four kms properties already landed that we need to take out again there's also a pile of new ones proposed already for komeda. drm-misc seems to work fairly well at encouraging these kind of cross-driver reviews and working on cross-driver infrastructure in drm core. Later on we can move all the drivers out to a dedicated arm tree again (if that's desired). Of coures that would mean Lowry and James need drm-misc commit rights (all other arm contributors have it already I think). Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com> Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-5-daniel.vetter@ffwll.ch
2019-07-08MAINTAINERS: take over for Zheng as CephFS kernel client maintainerJeff Layton1-2/+2
Zheng wants to be able to spend more time working on the MDS, so I've volunteered to take over for him as the CephFS kernel client maintainer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08Merge branches 'acpi-apei', 'acpi-doc' and 'acpi-soc'Rafael J. Wysocki1-3/+3
* acpi-apei: ACPI / APEI: Remove needless __ghes_check_estatus() calls * acpi-doc: docs: extcon: convert it to ReST and move to ACPI dir * acpi-soc: ACPI: APD: remove redundant assignment to pointer clk
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger1-12/+28
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-07-06Merge tag 'mips_fixes_5.2_2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix a silly typo in virt_addr_valid which led to completely bogus behavior (that happened to stop tripping up hardened usercopy despite being broken). - Fix UART parity setup on AR933x systems. - A build fix for non-Linux build machines. - Have the 'all' make target build DTBs, primarily to fit in with the behavior of scripts/package/builddeb. - Handle an execution hazard in TLB exceptions that use KScratch registers, which could inadvertently clobber the $1 register on some generally higher-end out-of-order CPUs. - A MAINTAINERS update to fix the path to the NAND driver for Ingenic systems" * tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct path to moved files MIPS: Add missing EHB in mtc0 -> mfc0 sequence. MIPS: have "plain" make calls build dtbs for selected platforms MIPS: fix build on non-linux hosts MIPS: ath79: fix ar933x uart parity mode MIPS: Fix bounds check virt_addr_valid
2019-07-06Merge branch 'asoc-5.3' into asoc-nextMark Brown1-1/+6
2019-07-05i2c: tegra: Add Dmitry as a reviewerDmitry Osipenko1-0/+1
I'm contributing to Tegra's upstream development in general and happened to review the Tegra's I2C patches for awhile because I'm actively using upstream kernel on all of my Tegra-powered devices and initially some of the submitted patches were getting my attention since they were causing problems. Recently Wolfram Sang asked whether I'm interested in becoming a reviewer for the driver and I don't mind at all. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [wsa: ack was expressed by Thierry Reding in a mail thread] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-07-04Merge branch 'spi-5.3' into spi-nextMark Brown1-0/+8
2019-07-04Merge branch 'regulator-5.3' into regulator-nextMark Brown1-0/+2
2019-07-03docs: misc-devices: convert files without extension to ReSTMauro Carvalho Chehab1-2/+2
Those files are also text files. Convert them to ReST and add to the misc-files index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/b7dc829809673bd8cffe0e7bbe9c9308681c6fe2.1561756511.git.mchehab+samsung@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+1
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03MAINTAINERS: Update for Intel Speed Select TechnologySrinivas Pandruvada1-0/+8
Added myself as the maintainer. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-03docs: extcon: convert it to ReST and move to ACPI dirMauro Carvalho Chehab1-3/+3
The intel-int3496.txt file is a documentation for an ACPI driver. There's no reason to keep it on a separate directory. So, instead of keeping it on some random location, move it to a sub-directory inside the ACPI documentation dir, renaming it to .rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03Merge branch 'sa1100-for-next'; commit 'riscpc^{/ARM: riscpc: enable chained ↵Russell King1-1/+1
scatterlist support}' into for-arm-soc
2019-07-03clocksource/drivers: Make Hyper-V clocksource ISA agnosticMichael Kelley1-0/+2
Hyper-V clock/timer code and data structures are currently mixed in with other code in the ISA independent drivers/hv directory as well as the ISA dependent Hyper-V code under arch/x86. Consolidate this code and data structures into a Hyper-V clocksource driver to better follow the Linux model. In doing so, separate out the ISA dependent portions so the new clocksource driver works for x86 and for the in-process Hyper-V on ARM64 code. To start, move the existing clockevents code to create the new clocksource driver. Update the VMbus driver to call initialization and cleanup routines since the Hyper-V synthetic timers are not independently enumerated in ACPI. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
2019-07-03MAINTAINERS: Add entry for ASPEED pinctrl driversAndrew Jeffery1-0/+9
Add myself as maintainer to avoid burdening others with the madness. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-5-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt ↵Talel Shenhar1-0/+6
Controller Driver The Amazon's Annapurna Labs Fabric Interrupt Controller has 32 inputs. A FIC (Fabric Interrupt Controller) may be cascaded into another FIC or directly to the main CPU Interrupt Controller (e.g. GIC). Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-03Merge tag 'fsi-for-5.3' of ↵Greg Kroah-Hartman1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for 5.3 - Add MAINTAINERS entry. There is now a git tree and a mailing list/patchwork for collecting FSI patches - Bug fix for error driver registration error paths - Correction for the OCC hwmon driver to meet the spec * tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi/core: Fix error paths on CFAM init OCC: FSI and hwmon: Add sequence numbering MAINTAINERS: Add FSI subsystem
2019-07-03MAINTAINERS: Add FSI subsystemJoel Stanley1-0/+13
The subsystem was merged some time ago but we did not have a maintainers entry. The mailing list exists to allow our patchwork to slurp up the patches. The tree will be co-maintained by myself and Jeremy. Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-02rdma/siw: addition to kernel build environmentBernard Metzler1-0/+7
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERSAndy Shevchenko1-1/+1
Swap PMIC and MULTIFUNCTION words in the title to: - show that this is about Intel PMICs - keep MAINTAINERS properly sorted Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02docs: hid: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the HID documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. While here, fix the sysfs example from hid-sensor.txt, that has a lot of "?" instead of the proper UTF-8 characters that are produced by the tree command. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-07-01gve: Add basic driver framework for Compute Engine Virtual NICCatherine Sullivan1-0/+9
Add a driver framework for the Compute Engine Virtual NIC that will be available in the future. At this point the only functionality is loading the driver. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Sagi Shahar <sagis@google.com> Signed-off-by: Jon Olson <jonolson@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Luigi Rizzo <lrizzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01MAINTAINERS: change the arch/riscv git tree to the new shared treePaul Walmsley1-1/+1
Palmer, with Konstantin's gracious help, set up a shared kernel.org git tree for arch/riscv patches going forward. Change the MAINTAINERS file accordingly. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-01MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv ↵Paul Walmsley1-1/+1
list The current K: entry in the "SIFIVE DRIVERS" section causes scripts/get_maintainer.pl to recommend that all patches that originate from, or are sent or copied to, anyone with a @sifive.com E-mail address to be copied to the linux-riscv@lists.infradead.org mailing list: https://lore.kernel.org/linux-riscv/CABEDWGxKCqCq2HBU8u1-=QgmMCdb69oXxN5rz65nxNODxdCAnw@mail.gmail.com/ This is undesirable, since not all of these patches may be relevant to the linux-riscv@ mailing list. Fix by excluding K: matches that look like a sifive.com E-mail address. Based on the following patch from Palmer Dabbelt <palmer@sifive.com>: https://lore.kernel.org/linux-riscv/mhng-2a897a66-1f3d-4878-ba47-1ae36b555540@palmer-si-x1e/ Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-01asm-generic: remove ptrace.hChristoph Hellwig1-1/+0
No one is using this header anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-01Merge tag 'iio-for-5.3b' of ↵Greg Kroah-Hartman1-1/+37
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...
2019-06-29MAINTAINERS: add CLANG/LLVM BUILD SUPPORT infoNick Desaulniers1-0/+8
Add keyword support so that our mailing list gets cc'ed for clang/llvm patches. We're pretty active on our mailing list so far as code review. There are numerous Googlers like myself that are paid to support building the Linux kernel with Clang and LLVM. Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28xfs: claim maintainership of loose filesDarrick J. Wong1-0/+6
Claim maintainership over the miscellaneous files outside of fs/xfs/ that came from xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe1-29/+52
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28MAINTAINERS: Add Ethernet PHY YAML fileMaxime Ripard1-0/+1
While the Ethernet PHY framework was marked as maintained, the device tree bindings associated to that framework was not listed under the maintained files. Fix that. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-06-28docs: leds: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the leds documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A smaller batch of fixes, nothing that stands out as risky or scary. Mostly DTS tweaks for a few issues: - GPU fixlets for Meson - CPU idle fix for LS1028A - PWM interrupt fixes for i.MX6UL Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and two MAINTAINER tweaks" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: imx6ul: fix PWM[1-4] interrupts ARM: omap2: remove incorrect __init annotation ARM: dts: gemini Fix up DNS-313 compatible string ARM: dts: Blank D-Link DIR-685 console arm64: defconfig: Enable FSL_EDMA driver arm64: dts: ls1028a: Fix CPU idle fail. MAINTAINERS: BCM53573: Add internal Broadcom mailing list MAINTAINERS: BCM2835: Add internal Broadcom mailing list ARM: dts: meson8b: fix the operating voltage of the Mali GPU ARM: dts: meson8b: drop undocumented property from the Mali GPU node ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
2019-06-28MAINTAINERS: Fix Andy's surname and the directory entries of VDSOThomas Gleixner1-3/+3
Fixes: e70980312a94 ("MAINTAINERS: Add entry for the generic VDSO library") Reported-by: Joe Perches/ <joe@perches.com> Reported-by: Andy Lutomirks^H^Hski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 23:25:12 +0000