Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"Couple of cleanup patches"
* tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
tty/serial: cleanup after ioc*_serial driver removal
ia64: replace setup_irq() by request_irq()
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- loongson64 irq rework
- dmi support loongson
- replace setup_irq() by request_irq()
- jazz cleanups
- minor cleanups and fixes
* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
MIPS: ralink: mt7621: Fix soc_device introduction
MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
MAINTAINERS: Update Loongson64 entry
MIPS: Loongson64: Load built-in dtbs
MIPS: Loongson64: Add generic dts
dt-bindings: mips: Add loongson boards
MIPS: Loongson64: Drop legacy IRQ code
dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
irqchip: Add driver for Loongson-3 HyperTransport PIC controller
dt-bindings: interrupt-controller: Add Loongson LIOINTC
irqchip: loongson-liointc: Workaround LPC IRQ Errata
irqchip: Add driver for Loongson I/O Local Interrupt Controller
docs: mips: remove no longer needed au1xxx_ide.rst documentation
MIPS: Alchemy: remove no longer used au1xxx_ide.h header
ide: remove no longer used au1xxx-ide driver
MIPS: Add support for Desktop Management Interface (DMI)
firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
MIPS: ralink: mt7621: introduce 'soc_device' initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP subsystem updates from Rafael Wysocki:
- Update MAINTAINERS to cover include/linux/pnp.h and add the
linux-acpi list to the PNP entry in it
- add the const modifier to the name field definition in struct
pnp_driver
- drop a pointer case in the RTC CMOS driver that has become redundant
All by Corentin Labbe.
* tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Add linux-acpi list to PNP
rtc: cmos: remove useless cast for driver_name
PNP: constify driver name
PNP: add missing include/linux/pnp.h to MAINTAINERS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc
Pull spi and regulator updates from Mark Brown:
"At one point in the release cycle I managed to fat finger things and
apply some SPI fixes onto a regulator branch and merge that into the
SPI tree, then pull in a change shared with the MTD tree moving the
Mediatek quadspi driver over to become the Mediatek spi-nor driver in
the SPI tree.
This has made a mess which I only just noticed while preparing this
and I can't see a sensible way to unpick things due to other
subsequent merge commits especially the pull from MTD so it looks like
the most sensible thing to do is give up and combine the two pull
requests.
Fortunately both subsystems were fairly quiet this cycle, the
highlights are:
regulator:
- Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869
and Qualcomm PMI8994 and SMB208.
SPI:
- Lots of enhancements for spi-fsl-dspi, including XSPI mode support,
from Vladimir Oltean.
- Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved
from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and
Qualcomm Atheros AR934x/QCA95xx"
* tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits)
spi: efm32: Convert to use GPIO descriptors
regulator: qcom_smd: Add pmi8994 regulator support
regulator: da9063: Fix get_mode() functions to read sleep field
spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member
spi: spi-s3c24xx: Replace zero-length array with flexible-array member
spi: stm32: Fix comments compilation warnings
spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses
spi: spi-fsl-dspi: Add support for LS1028A
spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message
spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path
spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode
spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode
spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode
spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA
spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR
regulator: driver.h: fix regulator_map_* function names
regulator: da9063: fix suspend
spi: mxs: Drop GPIO includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.7-rc1.
We again end up deleting more code than we added here, thanks to
finally getting rid of the old and obsolete wireless USB stuff, and
the exfat code (which is coming in again through the vfs tree in a
much cleaner version).
But some code does come back, with the octeon drivers being found to
actually be used in the wild, so those deletions are now reverted.
Other than those major things, just loads and loads of tiny checkpatch
cleanups all over the place, along with new IIO drivers and fixes.
All have been in linux-next with no reported issues"
[ Stephen Rothwell points out some reported issues due to merge conflicts ]
* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
staging: remove hp100 driver
staging: wilc1000: Use crc7 in lib/ rather than a private copy
Staging: rtl8192u: ieee80211: Use netdev_alert().
Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
staging: rtl8723bs: hal: Remove NULL check before kfree
staging: rtl8723bs: hal: Correct typos in comments
staging: rtl8723bs: os_dep: Correct typos in comments
staging: rtl8723bs: core: Correct typos in comments
staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
staging: rtl8188eu: cleanup long line in odm.c
staging: rtl8723bs: hal: Compress return logic
staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
staging: wilc1000: remove label from examples in DT binding documentation
staging: rtl8723bs: Remove blank line before '}' brace
Staging: rtl8188eu: hal: Add space around operators
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids,
and other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
USB: cdc-acm: restore capability check order
usb: cdns3: make signed 1 bit bitfields unsigned
usb: gadget: fsl: remove unused variable 'driver_desc'
usb: gadget: f_fs: Fix use after free issue as part of queue failure
usb: typec: Correct the documentation for typec_cable_put()
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
USB: serial: option: add Wistron Neweb D19Q1
USB: serial: option: add BroadMobi BM806U
USB: serial: option: add support for ASKEY WWHC050
usb: core: Add ACPI support for USB interface devices
driver core: platform: Reimplement devm_platform_ioremap_resource
usb: dwc2: convert to devm_platform_get_and_ioremap_resource
usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
drivers: provide devm_platform_get_and_ioremap_resource()
phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: imx219
- Support for some new pixelformats
- Support for Sun8i SoC
- Added more codecs to meson vdec driver
- Prepare for removing the legacy usbvision driver by moving it to
staging. This driver has issues and use legacy core APIs. If nobody
steps up to address those, it is time for its retirement.
- Several cleanups and improvements on drivers, with the addition of
new supported boards
* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
media: venus: firmware: Ignore secure call error on first resume
media: mtk-vpu: load vpu firmware from the new location
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
media: hantro: add initial i.MX8MQ support
media: dt-bindings: Document i.MX8MQ VPU bindings
media: vivid: fix incorrect PA assignment to HDMI outputs
media: hantro: Add linux-rockchip mailing list to MAINTAINERS
media: cedrus: h264: Fix 4K decoding on H6
media: siano: Use scnprintf() for avoiding potential buffer overflow
media: rc: Use scnprintf() for avoiding potential buffer overflow
media: allegro: create new struct for channel parameters
media: allegro: move mail definitions to separate file
media: allegro: pass buffers through firmware
media: allegro: verify source and destination buffer in VCU response
media: allegro: handle dependency of bitrate and bitrate_peak
media: allegro: read bitrate mode directly from control
media: allegro: make QP configurable
media: allegro: make frame rate configurable
media: allegro: skip filler data if possible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- New driver for AXI fan control
- Attenuator bypass support and support for inverting pwm output in
adt7475 driver
- Support for new power supply version in ibm-cffps driver
- PMBus drivers:
* support for multi-phase chips
* ltc2978 driver: add support for LTC2972, LTC2979, LTC3884,
LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and
LTM4700/
* tps53679 driver: add support for TPS53681, TPS53647, and TPS53667
* isl68137 driver: support for various 2nd Gen Renesas digital
multiphase chips added to isl68137 driver
- Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem,
and k10temp drivers
* tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits)
docs: hwmon: Update documentation for isl68137 pmbus driver
hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase
hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes
hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow
hwmon: (adt7475) Add support for inverting pwm output
hwmon: (adt7475) Add attenuator bypass support
dt-bindings: hwmon: Document adt7475 pwm-active-state property
dt-bindings: hwmon: Document adt7475 bypass-attenuator property
dt-bindings: hwmon: Document adt7475 binding
hwmon: (lm73) Add support for of_match_table
dt-bindings: Add TI LM73 as a trivial device
hwmon: (pmbus/tps53679) Add documentation
hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
hwmon: (pmbus/tps53679) Add support for TPS53681
hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
hwmon: (pmbus/tps53679) Add support for multiple chips IDs
hwmon: (pmbus) Implement multi-phase support
hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support
hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- A substantial edac_mc cleanup, sanitizing object freeing,
streamlining and simplifying code flow, and getting rid of a lot of
needless complexity in memory controller representation code, by
Robert Richter.
- A new EDAC driver for the ARM DMC-520 memory controller, by Lei Wang,
Shiping Ji and others.
- The usual sprinkling of misc cleanups and fixes all over the
subsystem.
* tag 'edac_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/armada_xp: Use scnprintf() for avoiding potential buffer overflow
EDAC/synopsys: Do not dump uninitialized pinf->col
EDAC: Add EDAC driver for DMC520
dt-bindings: edac: Dmc-520.yaml
EDAC/mce_amd: Print !SMCA processor warning only once
EDAC/mc: Remove per layer counters
EDAC/mc: Remove detail[] string and cleanup error string generation
EDAC/mc: Pass the error descriptor to error reporting functions
EDAC/mc: Remove enable_per_layer_report function argument
EDAC/mc: Report "unknown memory" on too many DIMM labels found
EDAC/mc: Carve out error increment into a separate function
EDAC/mc: Determine mci pointer from the error descriptor
EDAC: Store error type in struct edac_raw_error_desc
EDAC/mc: Reorder functions edac_mc_alloc*()
EDAC/mc: Split edac_mc_alloc() into smaller functions
EDAC/mc: Change mci device removal to use put_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"Updates with a XArray adaptation, several fixes for shrinker and
corrupted images are ready for this cycle.
All commits have been stress tested with no noticeable smoke out and
have been in linux-next as well.
Summary:
- Convert radix tree usage to XArray
- Fix shrink scan count on multiple filesystem instances
- Better handling for specific corrupted images
- Update my email address in MAINTAINERS"
* tag 'erofs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: update my email address
erofs: handle corrupted images whose decompressed size less than it'd be
erofs: use LZ4_decompress_safe() for full decoding
erofs: correct the remaining shrink objects
erofs: convert workstn to XArray
|
|
Pull documentation updates from Jonathan Corbet:
"This has been a busy cycle for documentation work.
Highlights include:
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api
manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ..."
* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
MAINTAINERS: adjust to filesystem doc ReST conversion
docs: deprecated.rst: Add BUG()-family
doc: zh_CN: add translation for virtiofs
doc: zh_CN: index files in filesystems subdirectory
docs: locking: Drop :c:func: throughout
docs: locking: Add 'need' to hardirq section
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
docs: prevent warnings due to autosectionlabel
docs: fix reference to core-api/namespaces.rst
docs: fix pointers to io-mapping.rst and io_ordering.rst files
Documentation: Better document the softlockup_panic sysctl
docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
docs: perf: imx-ddr.rst: get rid of a warning
docs: filesystems: fuse.rst: supress a Sphinx warning
docs: translations: it: avoid duplicate refs at programming-language.rst
docs: driver.rst: supress two ReSt warnings
docs: trace: events.rst: convert some new stuff to ReST format
Documentation: Add io_ordering.rst to driver-api manual
Documentation: Add io-mapping.rst to driver-api manual
...
|
|
Pull tpm updates from Jarkko Sakkinen:
"tpmdd updates for Linux v5.7"
* tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd:
KEYS: reaching the keys quotas correctly
tpm: ibmvtpm: Add support for TPM2
tpm: ibmvtpm: Wait for buffer to be set before proceeding
tpm: of: Handle IBM,vtpm20 case when getting log parameters
MAINTAINERS: adjust to trusted keys subsystem creation
tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays
tpm_tis_spi: use new 'delay' structure for SPI transfer delays
tpm: tpm2_bios_measurements_next should increase position index
tpm: tpm1_bios_measurements_next should increase position index
tpm: Don't make log failures fatal
|
|
Linux 5.6
|
|
'edac-urgent' into edac-updates-for-5.7
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
This email address will not be available in a few days.
Update my own email address to xiang@kernel.org, which
should be available all the time.
Link: https://lore.kernel.org/r/20200328040036.117974-1-gaoxiang25@huawei.com
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
|
|
|
|
Testing 'parse-maintainers' due to the previous commit shows a bad file
pattern for the "TI VPE/CAL DRIVERS" entry in the MAINTAINERS file.
There's also a lot of mis-ordered entries, but I'm still a bit nervous
about the inevitable and annoying merge problems it would probably cause
to fix them up.
The MAINTAINERS file is one of my least favorite files due to being huge
and centralized, but fixing it is also horribly painful for that reason.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A small set of late-rc patches, mostly fixes for various crashers,
some syzkaller fixes and a mlx5 HW limitation:
- Several MAINTAINERS updates
- Memory leak regression in ODP
- Several fixes for syzkaller related crashes. Google recently taught
syzkaller to create the software RDMA devices
- Crash fixes for HFI1
- Several fixes for mlx5 crashes
- Prevent unprivileged access to an unsafe mlx5 HW resource"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Block delay drop to unprivileged users
RDMA/mlx5: Fix access to wrong pointer while performing flush due to error
RDMA/core: Ensure security pkey modify is not lost
MAINTAINERS: Clean RXE section and add Zhu as RXE maintainer
IB/hfi1: Ensure pq is not left on waitlist
IB/rdmavt: Free kernel completion queue when done
RDMA/mad: Do not crash if the rdma device does not have a umad interface
RDMA/core: Fix missing error check on dev_set_name()
RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET
RDMA/mlx5: Fix the number of hwcounters of a dynamic counter
MAINTAINERS: Update maintainers for HISILICON ROCE DRIVER
RDMA/odp: Fix leaking the tgid for implicit ODP
|
|
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
|
|
To include newly added irqchip drivers.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Zhu Yanjun contributed many patches to RXE and expressed genuine interest
in improve RXE even more. Let's add him as a maintainer.
Link: https://lore.kernel.org/r/20200312083658.29603-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull dmaengine fixes from Vinod Koul:
"Late fixes in dmaengine for v5.6:
- move .device_release missing log warning to debug
- couple of maintainer entries for HiSilicon and IADX drivers
- off-by-one fix for idxd driver
- documentation warning fixes
- TI k3 dma error handling fix"
* tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()'
MAINTAINERS: Add maintainer for HiSilicon DMA engine driver
dmaengine: idxd: fix off by one on cdev dwq refcount
MAINTAINERS: rectify the INTEL IADX DRIVER entry
dmaengine: move .device_release missing log warning to debug level
docs: dmaengine: provider.rst: get rid of some warnings
|
|
Add path and co-maintainer entry for i.MX8MQ device tree bindings.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The linux-rockchip mailing list is relevant for the
Hantro driver, given this support the VPU present
in Rockchip SoCs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Pull in mips-fixes avoiding conflicts with more CI20 DT changes.
A few MIPS fixes:
- DT fixes for CI20
- Fix command line handling
- Correct patchwork URL
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the staging/iio fixes in here as well
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add myself as the maintainer of HiSilicon DMA engine driver.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1584062624-196854-1-git-send-email-wangzhou1@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Mauro's patch series <cover.1581955849.git.mchehab+huawei@kernel.org>
("[PATCH 00/44] Manually convert filesystem FS documents to ReST")
converts many Documentation/filesystems/ files to ReST.
Since then, ./scripts/get_maintainer.pl --self-test complains with 27
warnings on Documentation/filesystems/ of this kind:
warning: no file matches F: Documentation/filesystems/...
Adjust MAINTAINERS entries to all files converted from .txt to .rst in the
patch series and address the 27 warnings.
Link: https://lore.kernel.org/linux-erofs/cover.1581955849.git.mchehab+huawei@kernel.org
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200314175030.10436-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a maintainer section for psi, as it's a user-visible, configurable
kernel feature.
The patches are still routed through the scheduler tree due to the
close integration with that code, but get_maintainers.pl does the
right thing and makes sure everybody gets CCd:
$ ./scripts/get_maintainer.pl -f kernel/sched/psi.c
Johannes Weiner <hannes@cmpxchg.org> (maintainer:PRESSURE STALL INFORMATION (PSI))
Ingo Molnar <mingo@redhat.com> (maintainer:SCHEDULER)
Peter Zijlstra <peterz@infradead.org> (maintainer:SCHEDULER)
...
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200316191333.115523-4-hannes@cmpxchg.org
|
|
As asked by the PNP maintainer, linux PNP patch should be CC to
the linux-acpi mailing list.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO device support, fatures and cleanups for the 5.7 cycle
Includes changes for the counter subsystem
Core Feature
* Explicitly handle sysfs values in dB, including correctly handling the
needed postfix dB.
* Add a TODO to suggest suitable activities for new contributors to IIO now
the vast majority of drivers are out of staging (and the remaining ones
there are 'hard'). Also update the TODO in staging to remove stale entries.
Staging graduations
* ad7192 ADC.
New device support
* ad5770r
- New driver for this 6 channel DAC including DT bindings.
* ad8366
- Add supprot for the hmc1119 attenuator.
* al3010
- New driver supporting this Dyna-image light sensors.
- Power management and DT bindings added in additional patches.
* atlas-sensor
- Add support for atlas DO-SM device. Reads disolved oxygen in a solution.
* gpap002x00f
- New driver and bindings to support the GP2AP002A00F and GP2AP002S00F light
and proximity sensors. There is some limited existing support in
input. The intent is to drop this driver once IIO driver is in place.
* hmc425a
- New driver for this attenuator.
* icp10100
- New driver for this presure sensor.
* ltc2632
- Add support for the ltc2636 8 channel DAC. Includes bindings and some
tidying up of the driver.
* inv_mpu6050
- Support IAM20680, ICM20609, ICM20689 and ICM20690.
Includes related tidy up and rework of low pass filter bandwidth
handling to give suitable values for all chips.
Binding conversions to yaml or missing bindings docs.
* atlas-sensor, including consolidation of previous 3 separate docs into 1.
* ad7923, previously no doc.
* max1363, split into max1238 and max1363 to simplify yaml.
* stm32-adc
Features
* (counter) 104-quad-8
- Support a filter clock prescaler.
- Support reporting of encoder cable status.
* ad7124
- Low pass filter support.
- Debugfs interface to access registers directly.
* ad8366
- Support control of hardware gain.
* inv_mpu6050
- Runtime pm with autosuspend.
* npcm adc
- Add reset support. This is a breaking change if DT is not in sync,
however this device is a BMC so the ecosystem is closed enought that
this should not be a problem.
* srf04
- Add power management with DT bindings for the GPIO.
* stm32-timer-trigger
- Power management.
* (counter) stm32-timer-cnt
- Power management.
* vcnl4000
- Enable runtime PM for devices that don't use on demand measurement.
Cleanups and minor fixes
* core
- Avoid double read when using debugfs. Whilst we provide no guarantees
on lack of side effects using the debugfs interfaces, this one is
generate unexpected results so let us tidy it up.
* dac/Kconfig
- Alphabetic order.
* ad5755
- Grammar and minor other fixes.
* ad7124
- Fail probe if get_voltage fails as no meaningful readings can be had
without knowing the external reference.
- Switch to selection between different channel attributes rather than
building the arrays at runtime.
- Remove the spi_device_id table as the driver cannot be probled without
more information that can be provided without dt.
- Update sysfs docs to provide more inormation and bring remaining docs for
this part out of staging.
* ad9292
- Use new SPI transfer delay structure.
* adis library
- Add unlocked version of adis_initial_startup and refactor the function.
- Add a product ID santiy check.
- Add support for different self test registers.
- Use new SPI delay structure.
- Add new docs and tidy up existing.
* adis16136
- Initialize adis_data statically.
* adis16400
- Initialize adis_data statically.
* adis16460
- Use core __adis_initial_Startup now it supports everything needed.
* adis16480
- Initialize adis_data statically.
- Use core __adis_initial_startup now it supports everything needed.
* al3320a
- Add missing DT binding docs.
- Tidy up code formatting.
- Simplify error paths using devm_add_action_or_reset.
- Ensure autoloading works by adding the of_match_table.
* atlas-sensor
- Drop false requirement for interrupt line, the value can be polled using
a sysfs or hrtimer type trigger.
* exynos-adc
- Silence warning message on deferring probe.
* gp2ap002
- Greatly simplify the Lux LUT.
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* inv_mpu6050
- Various lttle tidyups.
- Simpliy I2C aux MUX handling by enabling it only at startup. It never
needs to be disabled.
- Simplify polling rate when magnetometer enabled by putting only under
control of userspace.
- Always execute full reset on devices supporting spi. It does no harm
when using i2c and makes for simpler code.
- Reduce over the top sleep times for vddio regulator power up.
- Greatly simplify power and engine management.
- Fix some delays in polled reads (only visible due to other changes)
- Stop preventing sampling rate changes whilst running as there is no
adverse consequence of doing so.
- Prevent attempting to read the temperature if neither accel nor
gyro is enabled.
* lmp9100
- Reorder actions around buffer setup and tear down as part of a sub-system
wide standardization of these.
* max1118
- Use new SPI transfer delay structure.
* mcp320x
- Use new SPI transfer delay structure.
* si1133
- Read full 24 bit signed integer instead o dropping last 8 bits of value.
Not a critical fix as just adds precision.
* st_sensors
- Use st_sensors_dev_name_probe instead of open coded version in st_accel
- Handle potential memory allocation failure.
* st_lsm6dsx
- Fix some wrong structure element naming in documentation.
- Add missing return value check.
* stm32_timer_cnt
- Drop some unused left over IIO headers from this count subsystem driver.
- Ensure the clock is enabled in master mode. Theoretical issue rather
than one known to happen in the wild.
* tlc4541
- Use new SPI delay structure.
* tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (98 commits)
iio: dac: Kconfig: sort symbols alphabetically
iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} positions
iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions
iio: trigger: stm32-timer: add power management support
iio: trigger: stm32-timer: rename enabled flag
iio: add a TODO
counter: 104-quad-8: Support Differential Encoder Cable Status
counter: 104-quad-8: Support Filter Clock Prescaler
iio: pressure: icp10100: add driver for InvenSense ICP-101xx
iio: industrialio-core: Fix debugfs read
iio: imu: adis: add a note better explaining state_lock
iio: imu: adis: update 'adis_data' struct doc-string
iio: imu: adis: add doc-string for 'adis' struct
iio: imu: adis_buffer: Use new structure for SPI transfer delays
iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
iio: adc: mcp320x: Use new structure for SPI transfer delays
iio: adc: max1118: Use new structure for SPI transfer delays
iio: adc: ad9292: Use new structure for SPI transfer delays
iio: adc: exynos: Silence warning about regulators during deferred probe
staging: iio: update TODO
...
|
|
Commit 9c860e4cf708 ("tty/serial: remove the ioc3_serial driver") and
commit a017ef17cfd8 ("tty/serial: remove the ioc4_serial driver") removed
the ioc{3,4}_serial driver, but missed some files.
Fortunately, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: drivers/tty/serial/ioc?_serial.c
The driver is gone, so remove the header and maintainer
entry as well.
The serial.rst Documentation might be useful, so we keep it and update
the maintainer entry to the document's actual maintainers.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.6
Third, and hopefully last, set of fixes for v5.6.
iwlwifi
* fix a locking issue in time events handling
* a fix in rate-scaling
* fix for a potential NULL pointer deref
* enable antenna diversity in some devices that were erroneously not doing it
* allow FW dumps to continue when the FW is stuck
* a fix in the HE capabilities handling
* another fix for FW dumps where we were reading wrong addresses
* fix link in MAINTAINERS file
rtlwifi
* fix regression causing connect issues in v5.4
wlcore
* remove merge damage which luckily didn't have any impact on functionality
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 47f9c2796891 ("KEYS: trusted: Create trusted keys subsystem")
renamed trusted.h to trusted_tpm.h in include/keys/, and moved trusted.c
to trusted-keys/trusted_tpm1.c in security/keys/.
Since then, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: security/keys/trusted.c
warning: no file matches F: include/keys/trusted.h
Rectify the KEYS-TRUSTED entry in MAINTAINERS now and ensure that all
files in security/keys/trusted-keys/ are identified as part of
KEYS-TRUSTED.
Co-developed-by: Sebastian Duda <sebastian.duda@fau.de>
Signed-off-by: Sebastian Duda <sebastian.duda@fau.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
|
|
Commit 7cbeb2e1bf0c ("media: smiapp: Move definitions under driver
directory") moved the definitions in include/media/i2c/smiapp.h into other
files and removed include/media/i2c/smiapp.h.
Since then, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: include/media/i2c/smiapp.h
Remove MAINTAINER file entry to this removed file and while at it, update
Sakari's email address in this section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove Sathya Perla, sathya.perla@broadcom.com is bouncing.
The driver has 3 more maintainers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"A few MIPS fixes:
- DT fixes for CI20
- Fix command line handling
- Correct patchwork URL"
* tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Correct MIPS patchwork URL
MIPS: DTS: CI20: fix interrupt for pcf8563 RTC
MIPS: DTS: CI20: fix PMU definitions for ACT8600
MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling
|
|
Commit bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data
accelerators") added the INTEL IADX DRIVER entry in MAINTAINERS, which
mentions include/linux/idxd.h as file entry. However, this header file was
not added in this commit, nor in any later one.
Hence, since then, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: include/linux/idxd.h
Drop the file entry to the non-existing file in INTEL IADX DRIVER now.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200307205737.5829-1-lukas.bulwahn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Casey Leedomn <leedom@chelsio.com> is bouncing,
Vishal indicated he's happy to take the role.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add myself as a maintainer for HNS RoCE drivers, and update Xavier's
e-amil address.
Link: https://lore.kernel.org/r/1583575114-32194-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Commit 5fed00dcaca8 ("Documentation: kobject.txt has been moved to
core-api/kobject.rst") missed to adjust the entry in MAINTAINERS.
Since then, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: Documentation/kobject.txt
Adjust DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS entry in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200304110821.7243-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Information about GCC plugins is relevant to kernel building, so move this
document to the kbuild manual.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It doesn't need to be a top-level chapter.
This patch also updates MAINTAINERS and makes sure the F: lines are
properly sorted.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200308211519.8414-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There exists a set of SPI controllers on some POWER processors that may
be accessed through the FSI bus. Add a driver to traverse the FSI CFAM
engine that can access and drive the SPI controllers. This driver would
typically be used by a baseboard management controller (BMC).
The SPI controllers operate by means of programming a sequencing engine
which automatically manages the usual SPI protocol buses. The driver
programs each transfer into the sequencer as various operations
specifying the slave chip and shifting data in and out on the lines.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20200306194118.18581-3-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current URL mentioned in iwlwifi's W entry is outdated and
currently pointing to a dead link. Change it so that it points to the
correct Wiki page directly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Now that there is a "real" solution for exfat in the vfs tree queued up
to be merged in 5.7-rc1 the "old" exfat code in staging can be removed.
Many thanks to Valdis for doing the work to get this into the tree in
the first place, it was greatly appreciated.
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Pali Rohár <pali@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Sungjong Seo <sj1557.seo@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200310105421.GA2810679@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|