summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds7-39/+64
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-13doc: don't use deprecated "---help---" markers in target docsLinus Torvalds1-2/+2
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-13Merge branch 'i2c/for-5.8' of ↵Linus Torvalds6-105/+359
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
2020-06-13Merge tag 'media/v5.8-2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
2020-06-13Merge tag 'notifications-20200601' of ↵Linus Torvalds3-0/+397
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull notification queue from David Howells: "This adds a general notification queue concept and adds an event source for keys/keyrings, such as linking and unlinking keys and changing their attributes. Thanks to Debarshi Ray, we do have a pull request to use this to fix a problem with gnome-online-accounts - as mentioned last time: https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47 Without this, g-o-a has to constantly poll a keyring-based kerberos cache to find out if kinit has changed anything. [ There are other notification pending: mount/sb fsinfo notifications for libmount that Karel Zak and Ian Kent have been working on, and Christian Brauner would like to use them in lxc, but let's see how this one works first ] LSM hooks are included: - A set of hooks are provided that allow an LSM to rule on whether or not a watch may be set. Each of these hooks takes a different "watched object" parameter, so they're not really shareable. The LSM should use current's credentials. [Wanted by SELinux & Smack] - A hook is provided to allow an LSM to rule on whether or not a particular message may be posted to a particular queue. This is given the credentials from the event generator (which may be the system) and the watch setter. [Wanted by Smack] I've provided SELinux and Smack with implementations of some of these hooks. WHY === Key/keyring notifications are desirable because if you have your kerberos tickets in a file/directory, your Gnome desktop will monitor that using something like fanotify and tell you if your credentials cache changes. However, we also have the ability to cache your kerberos tickets in the session, user or persistent keyring so that it isn't left around on disk across a reboot or logout. Keyrings, however, cannot currently be monitored asynchronously, so the desktop has to poll for it - not so good on a laptop. This facility will allow the desktop to avoid the need to poll. DESIGN DECISIONS ================ - The notification queue is built on top of a standard pipe. Messages are effectively spliced in. The pipe is opened with a special flag: pipe2(fds, O_NOTIFICATION_PIPE); The special flag has the same value as O_EXCL (which doesn't seem like it will ever be applicable in this context)[?]. It is given up front to make it a lot easier to prohibit splice&co from accessing the pipe. [?] Should this be done some other way? I'd rather not use up a new O_* flag if I can avoid it - should I add a pipe3() system call instead? The pipe is then configured:: ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth); ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter); Messages are then read out of the pipe using read(). - It should be possible to allow write() to insert data into the notification pipes too, but this is currently disabled as the kernel has to be able to insert messages into the pipe *without* holding pipe->mutex and the code to make this work needs careful auditing. - sendfile(), splice() and vmsplice() are disabled on notification pipes because of the pipe->mutex issue and also because they sometimes want to revert what they just did - but one or more notification messages might've been interleaved in the ring. - The kernel inserts messages with the wait queue spinlock held. This means that pipe_read() and pipe_write() have to take the spinlock to update the queue pointers. - Records in the buffer are binary, typed and have a length so that they can be of varying size. This allows multiple heterogeneous sources to share a common buffer; there are 16 million types available, of which I've used just a few, so there is scope for others to be used. Tags may be specified when a watchpoint is created to help distinguish the sources. - Records are filterable as types have up to 256 subtypes that can be individually filtered. Other filtration is also available. - Notification pipes don't interfere with each other; each may be bound to a different set of watches. Any particular notification will be copied to all the queues that are currently watching for it - and only those that are watching for it. - When recording a notification, the kernel will not sleep, but will rather mark a queue as having lost a message if there's insufficient space. read() will fabricate a loss notification message at an appropriate point later. - The notification pipe is created and then watchpoints are attached to it, using one of: keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01); watch_mount(AT_FDCWD, "/", 0, fd, 0x02); watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03); where in both cases, fd indicates the queue and the number after is a tag between 0 and 255. - Watches are removed if either the notification pipe is destroyed or the watched object is destroyed. In the latter case, a message will be generated indicating the enforced watch removal. Things I want to avoid: - Introducing features that make the core VFS dependent on the network stack or networking namespaces (ie. usage of netlink). - Dumping all this stuff into dmesg and having a daemon that sits there parsing the output and distributing it as this then puts the responsibility for security into userspace and makes handling namespaces tricky. Further, dmesg might not exist or might be inaccessible inside a container. - Letting users see events they shouldn't be able to see. TESTING AND MANPAGES ==================== - The keyutils tree has a pipe-watch branch that has keyctl commands for making use of notifications. Proposed manual pages can also be found on this branch, though a couple of them really need to go to the main manpages repository instead. If the kernel supports the watching of keys, then running "make test" on that branch will cause the testing infrastructure to spawn a monitoring process on the side that monitors a notifications pipe for all the key/keyring changes induced by the tests and they'll all be checked off to make sure they happened. https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch - A test program is provided (samples/watch_queue/watch_test) that can be used to monitor for keyrings, mount and superblock events. Information on the notifications is simply logged to stdout" * tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: smack: Implement the watch_key and post_notification hooks selinux: Implement the watch_key security hook keys: Make the KEY_NEED_* perms an enum rather than a mask pipe: Add notification lossage handling pipe: Allow buffers to be marked read-whole-or-error for notifications Add sample notification program watch_queue: Add a key/keyring notification facility security: Add hooks to rule on setting a watch pipe: Add general notification queue support pipe: Add O_NOTIFICATION_PIPE security: Add a hook for the point of notification insertion uapi: General notification queue definitions
2020-06-12Merge tag 'thermal-v5.8-rc1' of ↵Linus Torvalds5-0/+730
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) * tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits) thermal/int340x_thermal: Don't require IDSP to exist thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Export GDDV thermal: qoriq: Update the settings for TMUv2 thermal: rcar_thermal: Clean up rcar_thermal_update_temp() thermal: qoriq: Add platform dependencies drivers: thermal: tsens: Merge tsens-common.c into tsens.c thermal/of: Rename of-thermal.c thermal/governors: Prefix all source files with gov_ thermal/drivers/user_space: Sort headers alphabetically thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/core: Replace module.h with export.h ...
2020-06-12Merge tag 'pwm/for-5.8-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Nothing too exciting for this cycle. A couple of fixes across the board, and Lee volunteered to help with patch review" * tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Add missing "CONFIG_" prefix MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem pwm: imx27: Fix rounding behavior pwm: rockchip: Simplify rockchip_pwm_get_state() pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case pwm: tegra: Support dynamic clock frequency configuration pwm: jz4740: Add support for the JZ4725B pwm: jz4740: Make PWM start with the active part pwm: jz4740: Enhance precision in calculation of duty cycle pwm: jz4740: Drop dependency on MACH_INGENIC pwm: lpss: Fix get_state runtime-pm reference handling pwm: sun4i: Support direct clock output on Allwinner A64 pwm: Add support for Azoteq IQS620A PWM generator dt-bindings: pwm: rcar: add r8a77961 support pwm: Add missing '\n' in log messages
2020-06-12Merge tag 'devicetree-fixes-for-5.8-1' of ↵Linus Torvalds50-363/+270
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Another round of whack-a-mole removing 'allOf', redundant cases of 'maxItems' and incorrect 'reg' sizes - Fix support for yaml.h in non-standard paths * tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove redundant 'maxItems' dt-bindings: Fix more incorrect 'reg' property sizes in examples dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses dt-bindings: Remove more cases of 'allOf' containing a '$ref' scripts/dtc: use pkg-config to include <yaml.h> in non-standard path
2020-06-12dt-bindings: Remove redundant 'maxItems'Rob Herring7-9/+0
There's no need to specify 'maxItems' with the same value as the number of entries in 'items'. A meta-schema update will catch future cases. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: linux-clk@vger.kernel.org Cc: linux-pwm@vger.kernel.org Cc: linux-usb@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-11Merge tag 'locking-kcsan-2020-06-11' of ↵Linus Torvalds2-0/+322
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the Kernel Concurrency Sanitizer from Thomas Gleixner: "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support" * tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining compiler.h: Move function attributes to compiler_types.h compiler.h: Avoid nested statement expression in data_race() compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE() kcsan: Update Documentation to change supported compilers kcsan: Remove 'noinline' from __no_kcsan_or_inline kcsan: Pass option tsan-instrument-read-before-write to Clang kcsan: Support distinguishing volatile accesses kcsan: Restrict supported compilers kcsan: Avoid inserting __tsan_func_entry/exit if possible ubsan, kcsan: Don't combine sanitizer with kcov on clang objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn() kcsan: Add __kcsan_{enable,disable}_current() variants checkpatch: Warn about data_race() without comment kcsan: Use GFP_ATOMIC under spin lock Improve KCSAN documentation a bit kcsan: Make reporting aware of KCSAN tests kcsan: Fix function matching in report kcsan: Change data_race() to no longer require marking racing accesses kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h ...
2020-06-11lib/lzo: fix ambiguous encoding bug in lzo-rleDave Rodgman1-2/+6
In some rare cases, for input data over 32 KB, lzo-rle could encode two different inputs to the same compressed representation, so that decompression is then ambiguous (i.e. data may be corrupted - although zram is not affected because it operates over 4 KB pages). This modifies the compressor without changing the decompressor or the bitstream format, such that: - there is no change to how data produced by the old compressor is decompressed - an old decompressor will correctly decode data from the updated compressor - performance and compression ratio are not affected - we avoid introducing a new bitstream format In testing over 12.8M real-world files totalling 903 GB, three files were affected by this bug. I also constructed 37M semi-random 64 KB files totalling 2.27 TB, and saw no affected files. Finally I tested over files constructed to contain each of the ~1024 possible bad input sequences; for all of these cases, updated lzo-rle worked correctly. There is no significant impact to performance or compression ratio. Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dave Rodgman <dave.rodgman@arm.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200507100203.29785-1-dave.rodgman@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-11dt-bindings: Fix more incorrect 'reg' property sizes in examplesRob Herring10-13/+13
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to 1 cell for address and size. Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-rockchip@lists.infradead.org Cc: linux-media@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-11dt-bindings: phy: qcom: Fix missing 'ranges' and example addressesRob Herring2-25/+33
The QCom QMP PHY bindings have child nodes with translatable (MMIO) addresses, so a 'ranges' property is required in the parent node. Additionally, the examples default to 1 address and size cell, so let's fix that, too. Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml") Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-11dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring33-316/+224
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-11Merge tag 'mailbox-v5.8' of ↵Linus Torvalds4-88/+226
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "qcom: - new controller driver for IPCC - reorg the of_device data - add support for ipq6018 platform spreadtrum: - new sprd controller driver imx: - implement suspend/resume PM support misc: - make pcc driver struct static - fix return value in imx_mu_scu - disable clock before bailout in imx probe - remove duplicate error mssg in zynqmp probe - fix header size in imx.scu - check for null instead of is-err in zynqmp" * tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom: Add ipq6018 apcs compatible mailbox: qcom: Add clock driver name in apcs mailbox driver data dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag mailbox: imx: Add runtime PM callback to handle MU clocks mailbox: imx: Add context save/restore for suspend/resume MAINTAINERS: Add entry for Qualcomm IPCC driver mailbox: Add support for Qualcomm IPCC dt-bindings: mailbox: Add devicetree binding for Qcom IPCC mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe() mailbox: imx-mailbox: fix scu msg header size check mailbox: sprd: Add Spreadtrum mailbox driver dt-bindings: mailbox: Add the Spreadtrum mailbox documentation mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe() mailbox: imx: Disable the clock on devm_mbox_controller_register() failure mailbox: imx: Fix return in imx_mu_scu_xlate() mailbox: imx: Support runtime PM mailbox: pcc: make pcc_mbox_driver static
2020-06-11Merge tag 'sound-fix-5.8-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are last-minute fixes gathered before merge window close; a few fixes are for the core while the rest majority are driver fixes. - PCM locking annotation fixes and the possible self-lock fix - ASoC DPCM regression fixes with multi-CPU DAI - A fix for inconsistent resume from system-PM on USB-audio - Improved runtime-PM handling with multiple USB interfaces - Quirks for HD-audio and USB-audio - Hardened firmware handling in max98390 codec - A couple of fixes for meson" * tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ASoC: rt5645: Add platform-data for Asus T101HA ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags ASoC: Intel: boards: replace capture_only by dpcm_capture ASoC: core: only convert non DPCM link to DPCM link ASoC: soc-pcm: dpcm: fix playback/capture checks ASoC: meson: add missing free_irq() in error path ALSA: pcm: disallow linking stream to itself ALSA: usb-audio: Manage auto-pm of all bundled interfaces ALSA: hda/realtek - add a pintbl quirk for several Lenovo machines ALSA: pcm: fix snd_pcm_link() lockdep splat ALSA: usb-audio: Use the new macro for HP Dock rename quirks ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock ALSA: emu10k1: delete an unnecessary condition dt-bindings: ASoc: Fix tdm-slot documentation spelling error ASoC: meson: fix memory leak of links if allocation of ldata fails ALSA: usb-audio: Fix inconsistent card PM state after resume ASoC: max98390: Fix potential crash during param fw loading ASoC: max98390: Fix incorrect printf qualifier ASoC: fsl-asoc-card: Defer probe when fail to find codec device ...
2020-06-11kcsan: Update Documentation to change supported compilersMarco Elver1-8/+1
Document change in required compiler version for KCSAN, and remove the now redundant note about __no_kcsan and inlining problems with older compilers. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200521142047.169334-8-elver@google.com
2020-06-11Rebase locking/kcsan to locking/urgentThomas Gleixner2-0/+329
Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11Merge tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-0/+2
Pull nfsd updates from Bruce Fields: "Highlights: - Keep nfsd clients from unnecessarily breaking their own delegations. Note this requires a small kthreadd addition. The result is Tejun Heo's suggestion (see link), and he was OK with this going through my tree. - Patch nfsd/clients/ to display filenames, and to fix byte-order when displaying stateid's. - fix a module loading/unloading bug, from Neil Brown. - A big series from Chuck Lever with RPC/RDMA and tracing improvements, and lay some groundwork for RPC-over-TLS" Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com * tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits) sunrpc: use kmemdup_nul() in gssp_stringify() nfsd: safer handling of corrupted c_type nfsd4: make drc_slab global, not per-net SUNRPC: Remove unreachable error condition in rpcb_getport_async() nfsd: Fix svc_xprt refcnt leak when setup callback client failed sunrpc: clean up properly in gss_mech_unregister() sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations. sunrpc: check that domain table is empty at module unload. NFSD: Fix improperly-formatted Doxygen comments NFSD: Squash an annoying compiler warning SUNRPC: Clean up request deferral tracepoints NFSD: Add tracepoints for monitoring NFSD callbacks NFSD: Add tracepoints to the NFSD state management code NFSD: Add tracepoints to NFSD's duplicate reply cache SUNRPC: svc_show_status() macro should have enum definitions SUNRPC: Restructure svc_udp_recvfrom() SUNRPC: Refactor svc_recvfrom() SUNRPC: Clean up svc_release_skb() functions SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives SUNRPC: Replace dprintk() call sites in TCP receive path ...
2020-06-11media: v4l2-subdev.rst: correct information about v4l2 eventsMichael Rodin1-2/+1
Remove description of non-existing v4l2_subdev.nevents and replace the undefined flag V4L2_SUBDEV_USES_EVENTS by the correct flag V4L2_SUBDEV_FL_HAS_EVENTS, which is already documented in v4l2_subdev.flags Fixes: commit 02adb1cc765b ("[media] v4l: subdev: Events support") Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-10docs: networkng: convert sja1105's devlink info to RTSJakub Kicinski3-27/+50
A new file snuck into the tree after all existing documentation was converted to RST. Convert sja1105's devlink info and move it where the rest of the drivers are documented. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10docs: networkng: fix lists and table in sja1105Jakub Kicinski1-2/+4
We need an empty line before list stats, otherwise first point will be smooshed into the paragraph. Inside tables text must start at the same offset in the cell, otherwise sphinx thinks it's a new indented block. Documentation/networking/dsa/sja1105.rst:108: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:112: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:245: WARNING: Unexpected indentation. Documentation/networking/dsa/sja1105.rst:246: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:253: WARNING: Unexpected indentation. Documentation/networking/dsa/sja1105.rst:254: WARNING: Block quote ends without a blank line; unexpected unindent. Fixes: a20bc43bfb2e ("docs: net: dsa: sja1105: document the best_effort_vlan_filtering option") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10docs: networking: fix extra spaces in ethtool-netlinkJakub Kicinski1-6/+6
Sphinx appears to get upset at extra spaces at the end of a literal: Documentation/networking/ethtool-netlink.rst:1032: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1034: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1036: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1089: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1091: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1093: WARNING: Inline literal start-string without end-string. Fixes: f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured") Fixes: a331172b156b ("net: ethtool: Add attributes for cable test TDR data") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10Merge branch 'rwonce/rework' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
2020-06-10Merge tag 'docs-5.8-2' of git://git.lwn.net/linuxLinus Torvalds40-82/+90
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving docs fixes, along with a patch changing a lot of HTTP links to HTTPS that had to be yanked and redone before the first pull" * tag 'docs-5.8-2' of git://git.lwn.net/linux: docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource() Replace HTTP links with HTTPS ones: documentation docs: it_IT: address invalid reference warnings doc: zh_CN: use doc reference to resolve undefined label warning docs: Update the location of the LF NDA program docs: dev-tools: coccinelle: underlines
2020-06-10Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds2-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10Merge branch 'for-linus' of ↵Linus Torvalds6-71/+724
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS269A capacitive touch controller - a new driver for the Cypress CY8CTMA140 touchscreen - updates to Elan and ft5x06 touchscreen drivers - assorted driver fixes - msm-vibrator has been removed as we have a more generic solution * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: adi - work around module name confict Input: iqs269a - add missing I2C dependency Input: elants - refactor elants_i2c_execute_command() Input: elants - override touchscreen info with DT properties Input: elants - remove unused axes Input: add support for Azoteq IQS269A dt-bindings: input: Add bindings for Azoteq IQS269A Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups Input: remove msm-vibrator driver dt-bindings: Input: remove msm-vibrator Input: elants_i2c - provide an attribute to show calibration count Input: introduce input_mt_report_slot_inactive() dt-bindings: input: touchscreen: elants_i2c: convert to YAML Input: add driver for the Cypress CY8CTMA140 touchscreen dt-bindings: touchscreen: Add CY8CTMA140 bindings Input: edt-ft5x06 - prefer asynchronous probe Input: edt-ft5x06 - improve power management operations Input: edt-ft5x06 - move parameter restore into helper Input: edt-ft5x06 - fix get_default register write access Input: atkbd - receive and use physcode->keycode mapping from FW ...
2020-06-10Merge tag 'mtd/for-5.8' of ↵Linus Torvalds4-2/+72
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds29-124/+757
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-10Merge tag 'for-v5.8' of ↵Linus Torvalds14-147/+570
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...
2020-06-10Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-172/+263
Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ...
2020-06-10Documentation/CodingStyle: Fix duplicate "are" typoGeert Uytterhoeven1-1/+1
The improved paragraph about line lengths contains a sentence with a duplicate word: there is one "are" at the end of a line, followed by a second one at the beginning of the next line. Drop the first one, as that one is part of the longest line. Fixes: bdc48fa11e46f867 ("checkpatch/coding-style: deprecate 80-column warning") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-10Merge branch 'pm-opp'Rafael J. Wysocki2-3/+18
* pm-opp: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10Merge tag 'asoc-fix-v5.8' of ↵Takashi Iwai1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 A small pile of fixes that came in during the merge window, the DPCM fixes from Pierre are the most notable thing here.
2020-06-09Merge tag 'fuse-update-5.8' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix a rare deadlock in virtiofs - Fix st_blocks in writeback cache mode - Fix wrong checks in splice move causing spurious warnings - Fix a race between a GETATTR request and a FUSE_NOTIFY_INVAL_INODE notification - Use rb-tree instead of linear search for pages currently under writeout by userspace - Fix copy_file_range() inconsistencies * tag 'fuse-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: copy_file_range should truncate cache fuse: fix copy_file_range cache issues fuse: optimize writepages search fuse: update attr_version counter on fuse_notify_inval_inode() fuse: don't check refcount after stealing page fuse: fix weird page warning fuse: use dump_page virtiofs: do not use fuse_fill_super_common() for device installation fuse: always allow query of st_dev fuse: always flush dirty data on close(2) fuse: invalidate inode attr in writeback cache mode fuse: Update stale comment in queue_interrupt() fuse: BUG_ON correction in fuse_dev_splice_write() virtiofs: Add mount option and atime behavior to the doc virtiofs: schedule blocking async replies in separate worker
2020-06-09Merge tag 'ovl-update-5.8' of ↵Linus Torvalds2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "Fixes: - Resolve mount option conflicts consistently - Sync before remount R/O - Fix file handle encoding corner cases - Fix metacopy related issues - Fix an unintialized return value - Add missing permission checks for underlying layers Optimizations: - Allow multipe whiteouts to share an inode - Optimize small writes by inheriting SB_NOSEC from upper layer - Do not call ->syncfs() multiple times for sync(2) - Do not cache negative lookups on upper layer - Make private internal mounts longterm" * tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits) ovl: remove unnecessary lock check ovl: make oip->index bool ovl: only pass ->ki_flags to ovl_iocb_to_rwf() ovl: make private mounts longterm ovl: get rid of redundant members in struct ovl_fs ovl: add accessor for ofs->upper_mnt ovl: initialize error in ovl_copy_xattr ovl: drop negative dentry in upper layer ovl: check permission to open real file ovl: call secutiry hook in ovl_real_ioctl() ovl: verify permissions in ovl_path_open() ovl: switch to mounter creds in readdir ovl: pass correct flags for opening real directory ovl: fix redirect traversal on metacopy dentries ovl: initialize OVL_UPPERDATA in ovl_lookup() ovl: use only uppermetacopy state in ovl_lookup() ovl: simplify setting of origin for index lookup ovl: fix out of bounds access warning in ovl_check_fb_len() ovl: return required buffer size for file handles ovl: sync dirty data when remounting to ro mode ...
2020-06-09dt-bindings: clock: Add a missing include to MMP Audio Clock bindingLubomir Rintel1-0/+1
The include file for input clock in the example was missing, breaking the validation. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reported-by: Rob Herring <robh+dt@kernel.org> Link: https://lore.kernel.org/r/20200605065258.567858-1-lkundrak@v3.sk Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-09Merge tag 'f2fs-for-5.8' of ↵Linus Torvalds2-1/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added some knobs to enhance compression feature and harden testing environment. In addition, we've fixed several bugs reported from Android devices such as long discarding latency, device hanging during quota_sync, etc. Enhancements: - support lzo-rle algorithm - add two ioctls to release and reserve blocks for compression - support partial truncation/fiemap on compressed file - introduce sysfs entries to attach IO flags explicitly - add iostat trace point along with read io stat Bug fixes: - fix long discard latency - flush quota data by f2fs_quota_sync correctly - fix to recover parent inode number for power-cut recovery - fix lz4/zstd output buffer budget - parse checkpoint mount option correctly - avoid inifinite loop to wait for flushing node/meta pages - manage discard space correctly And some refactoring and clean up patches were added" * tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: attach IO flags to the missing cases f2fs: add node_io_flag for bio flags likewise data_io_flag f2fs: remove unused parameter of f2fs_put_rpages_mapping() f2fs: handle readonly filesystem in f2fs_ioc_shutdown() f2fs: avoid utf8_strncasecmp() with unstable name f2fs: don't return vmalloc() memory from f2fs_kmalloc() f2fs: fix retry logic in f2fs_write_cache_pages() f2fs: fix wrong discard space f2fs: compress: don't compress any datas after cp stop f2fs: remove unneeded return value of __insert_discard_tree() f2fs: fix wrong value of tracepoint parameter f2fs: protect new segment allocation in expand_inode_data f2fs: code cleanup by removing ifdef macro surrounding f2fs: avoid inifinite loop to wait for flushing node pages at cp_error f2fs: flush dirty meta pages when flushing them f2fs: fix checkpoint=disable:%u%% f2fs: compress: fix zstd data corruption f2fs: add compressed/gc data read IO stat f2fs: fix potential use-after-free issue f2fs: compress: don't handle non-compressed data in workqueue ...
2020-06-09Merge tag 'trace-v5.8' of ↵Linus Torvalds1-0/+2115
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "No new features this release. Mostly clean ups, restructuring and documentation. - Have ftrace_bug() show ftrace errors before the WARN, as the WARN will reboot the box before the error messages are printed if panic_on_warn is set. - Have traceoff_on_warn disable tracing sooner (before prints) - Write a message to the trace buffer that its being disabled when disable_trace_on_warning() is set. - Separate out synthetic events from histogram code to let it be used by other parts of the kernel. - More documentation on histogram design. - Other small fixes and clean ups" * tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option tracing/doc: Fix ascii-art in histogram-design.rst tracing: Add a trace print when traceoff_on_warning is triggered ftrace,bug: Improve traceoff_on_warn selftests/ftrace: Distinguish between hist and synthetic event checks tracing: Move synthetic events to a separate file tracing: Fix events.rst section numbering tracing/doc: Fix typos in histogram-design.rst tracing: Add hist_debug trace event files for histogram debugging tracing: Add histogram-design document tracing: Check state.disabled in synth event trace functions tracing/probe: reverse arguments to list_add tools/bootconfig: Add a summary of test cases and return error ftrace: show debugging information when panic_on_warn set
2020-06-09Merge tag 'linux-kselftest-kunit-5.8-rc1' of ↵Linus Torvalds2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit updates from Shuah Khan: "This consists of: - Several config fragment fixes from Anders Roxell to improve test coverage. - Improvements to kunit run script to use defconfig as default and restructure the code for config/build/exec/parse from Vitor Massaru Iha and David Gow. - Miscellaneous documentation warn fix" * tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig kunit: use KUnit defconfig by default kunit: use --build_dir=.kunit as default Documentation: test.h - fix warnings kunit: kunit_tool: Separate out config/build/exec/parse
2020-06-09Merge tag 'linux-kselftest-5.8-rc1' of ↵Linus Torvalds1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This consists of: - Several fixes from Masami Hiramatsu to improve coverage for lib and sysctl tests. - Clean up to vdso test and a new test for getcpu() from Mark Brown. - Add new gen_tar selftests Makefile target generate selftest package running "make gen_tar" in selftests directory from Veronika Kabatova. - Other miscellaneous fixes to timens, exec, tpm2 tests" * tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/sysctl: Make sysctl test driver as a module selftests/sysctl: Fix to load test_sysctl module lib: Make test_sysctl initialized as module lib: Make prime number generator independently selectable selftests/ftrace: Return unsupported if no error_log file selftests/ftrace: Use printf for backslash included command selftests/timens: handle a case when alarm clocks are not supported Kernel selftests: Add check if TPM devices are supported selftests: vdso: Add a selftest for vDSO getcpu() selftests: vdso: Use a header file to prototype parse_vdso API selftests: vdso: Rename vdso_test to vdso_test_gettimeofday selftests/exec: Verify execve of non-regular files fail selftests: introduce gen_tar Makefile target
2020-06-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-12/+12
Merge even more updates from Andrew Morton: - a kernel-wide sweep of show_stack() - pagetable cleanups - abstract out accesses to mmap_sem - prep for mmap_sem scalability work - hch's user acess work Subsystems affected by this patch series: debug, mm/pagemap, mm/maccess, mm/documentation. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (93 commits) include/linux/cache.h: expand documentation over __read_mostly maccess: return -ERANGE when probe_kernel_read() fails x86: use non-set_fs based maccess routines maccess: allow architectures to provide kernel probing directly maccess: move user access routines together maccess: always use strict semantics for probe_kernel_read maccess: remove strncpy_from_unsafe tracing/kprobes: handle mixed kernel/userspace probes better bpf: rework the compat kernel probe handling bpf:bpf_seq_printf(): handle potentially unsafe format string better bpf: handle the compat string in bpf_trace_copy_string better bpf: factor out a bpf_trace_copy_string helper maccess: unify the probe kernel arch hooks maccess: remove probe_read_common and probe_write_common maccess: rename strnlen_unsafe_user to strnlen_user_nofault maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault maccess: update the top of file comment maccess: clarify kerneldoc comments maccess: remove duplicate kerneldoc comments ...
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse4-9/+9
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: convert mmap_sem API commentsMichel Lespinasse1-3/+3
Convert comments that reference old mmap_sem APIs to reference corresponding new mmap locking APIs instead. Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-12-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09Merge branch 'x86/srbds' of ↵Linus Torvalds4-0/+171
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 srbds fixes from Thomas Gleixner: "The 9th episode of the dime novel "The performance killer" with the subtitle "Slow Randomizing Boosts Denial of Service". SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. This is equivalent to a full bus lock, which means that many threads running the RNG instructions in parallel have the same effect as the same amount of threads issuing a locked instruction targeting an address which requires locking of two cachelines at once. The mitigation support comes with the usual pile of unpleasant ingredients: - command line options - sysfs file - microcode checks - a list of vulnerable CPUs identified by model and stepping this time which requires stepping match support for the cpu match logic. - the inevitable slowdown of affected CPUs" * branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Add Ivy Bridge to affected list x86/speculation: Add SRBDS vulnerability and mitigation documentation x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation x86/cpu: Add 'table' argument to cpu_matches()
2020-06-08f2fs: add node_io_flag for bio flags likewise data_io_flagJaegeuk Kim1-0/+9
This patch adds another way to attach bio flags to node writes. Description: Give a way to attach REQ_META|FUA to node writes given temperature-based bits. Now the bits indicate: * REQ_META | REQ_FUA | * 5 | 4 | 3 | 2 | 1 | 0 | * Cold | Warm | Hot | Cold | Warm | Hot | Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-06-08Merge tag 'mac80211-for-davem-2020-06-08' of ↵David S. Miller2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a small update: * fix the deadlock on rfkill/wireless removal that a few people reported * fix an uninitialized variable * update wiki URLs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08Merge tag 'rproc-v5.8' of ↵Linus Torvalds3-9/+102
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
2020-06-08Merge tag 'gfs2-for-5.8' of ↵Linus Torvalds2-64/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - An iopen glock locking scheme rework that speeds up deletes of inodes accessed from multiple nodes - Various bug fixes and debugging improvements - Convert gfs2-glocks.txt to ReST * tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix use-after-free on transaction ail lists gfs2: new slab for transactions gfs2: initialize transaction tr_ailX_lists earlier gfs2: Smarter iopen glock waiting gfs2: Wake up when setting GLF_DEMOTE gfs2: Check inode generation number in delete_work_func gfs2: Move inode generation number check into gfs2_inode_lookup gfs2: Minor gfs2_lookup_by_inum cleanup gfs2: Try harder to delete inodes locally gfs2: Give up the iopen glock on contention gfs2: Turn gl_delete into a delayed work gfs2: Keep track of deleted inode generations in LVBs gfs2: Allow ASPACE glocks to also have an lvb gfs2: instrumentation wrt log_flush stuck gfs2: introduce new gfs2_glock_assert_withdraw gfs2: print mapping->nrpages in glock dump for address space glocks gfs2: Only do glock put in gfs2_create_inode for free inodes gfs2: Allow lock_nolock mount to specify jid=X gfs2: Don't ignore inode write errors during inode_go_sync docs: filesystems: convert gfs2-glocks.txt to ReST
2020-06-08Merge tag 's390-5.8-1' of ↵Linus Torvalds5-5/+227
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...