summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds3-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-25Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linuxLinus Torvalds1-9/+20
Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+8
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-24Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-6/+43
Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds30-47/+303
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds8-15/+517
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+2
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-23Merge tag 'docs-5.10-2' of git://git.lwn.net/linuxLinus Torvalds14-77/+154
Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.10-2' of git://git.lwn.net/linux: docs: Add two missing entries in vm sysctl index docs/vm: trivial fixes to several spelling mistakes docs: submitting-patches: describe preserving review/test tags Documentation: Chinese translation of Documentation/arm64/hugetlbpage.rst Documentation: x86: fix a missing word in x86_64/mm.rst. docs: driver-api: remove a duplicated index entry docs: lkdtm: Modernize and improve details docs: deprecated.rst: Expand str*cpy() replacement notes docs/cpu-load: format the example code.
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds3-0/+163
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-10-23Merge tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull more drm fixes from Dave Airlie: "This should be the last round of things for rc1, a bunch of i915 fixes, some amdgpu, more font OOB fixes and one ttm fix just found reading code: fbcon/fonts: - Two patches to prevent OOB access ttm: - fix for evicition value range check amdgpu: - Sienna Cichlid fixes - MST manager resource leak fix - GPU reset fix amdkfd: - Luxmark fix for Navi1x i915: - Tweak initial DPCD backlight.enabled value (Sean) - Initialize reserved MOCS indices (Ayaz) - Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville) - Support parsing of oversize batches (Chris) - Delay execlists processing for TGL (Chris) - Use the active reference on the vma during error capture (Chris) - Widen CSB pointer (Chris) - Wait for CSB entries on TGL (Chris) - Fix unwind for scratch page allocation (Chris) - Exclude low patches of stolen memory (Chris) - Force VT'd workarounds when running as a guest OS (Chris) - Drop runtime-pm assert from vpgu io accessors (Chris)" * tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits) drm/amdgpu: correct the cu and rb info for sienna cichlid drm/amd/pm: remove the average clock value in sysfs drm/amd/pm: fix pp_dpm_fclk Revert drm/amdgpu: disable sienna chichlid UMC RAS drm/amd/pm: fix pcie information for sienna cichlid drm/amdkfd: Use same SQ prefetch setting as amdgpu drm/amd/swsmu: correct wrong feature bit mapping drm/amd/psp: Fix sysfs: cannot create duplicate filename drm/amd/display: Avoid MST manager resource leak. drm/amd/display: Revert "drm/amd/display: Fix a list corruption" drm/amdgpu: update golden setting for sienna_cichlid drm/amd/swsmu: add missing feature map for sienna_cichlid drm/amdgpu: correct the gpu reset handling for job != NULL case drm/amdgpu: add rlc iram and dram firmware support drm/amdgpu: add function to program pbb mode for sienna cichlid drm/i915: Drop runtime-pm assert from vgpu io accessors drm/i915: Force VT'd workarounds when running as a guest OS drm/i915: Exclude low pages (128KiB) of stolen from use drm/i915/gt: Onion unwind for scratch page allocation failure drm/ttm: fix eviction valuable range check. ...
2020-10-23Merge tag 'net-5.10-rc1' of ↵Linus Torvalds3-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ...
2020-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-57/+304
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
2020-10-23Documentation: add xen.fifo_events kernel parameter descriptionJuergen Gross1-0/+7
The kernel boot parameter xen.fifo_events isn't listed in Documentation/admin-guide/kernel-parameters.txt. Add it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-6-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23dma-mapping: document dma_{alloc,free}_pagesChristoph Hellwig1-6/+43
Document the new dma_alloc_pages and dma_free_pages APIs, and fix up the documentation for dma_alloc_noncoherent and dma_free_noncoherent. Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-10-22docs: Add two missing entries in vm sysctl indexFam Zheng1-0/+2
Both seem overlooked while adding the section in the main content. Signed-off-by: Fam Zheng <famzheng@amazon.com> Link: https://lore.kernel.org/r/20201022065403.3936070-1-fam@euphon.net Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-22docs/vm: trivial fixes to several spelling mistakesColin Ian King4-4/+4
Fix several spelling mistakes in vm documentation. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201022142653.254429-1-colin.king@canonical.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-22Merge tag 'rproc-v5.10' of ↵Linus Torvalds2-0/+325
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds12-71/+120
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
2020-10-22Merge tag 'pwm/for-5.10-rc1' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This release cycle's updates are mostly cleanup and some minor fixes" * tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support pwm: Allow store 64-bit duty cycle from sysfs interface pwm: img: Fix null pointer access in probe pwm: pca9685: Disable unused alternative addresses pwm: pca9685: Use BIT() macro instead of shift pwm: pca9685: Make comments more consistent pwm: sun4i: Simplify with dev_err_probe() pwm: sprd: Simplify with dev_err_probe() pwm: sifive: Simplify with dev_err_probe() pwm: rockchip: Simplify with dev_err_probe() pwm: jz4740: Simplify with dev_err_probe() pwm: bcm2835: Simplify with dev_err_probe() pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro pwm: rockchip: Keep enabled PWMs running while probing dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds7-17/+75
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Update debugging in IPVS tcp protocol handler to make it easier to understand, from longguang.yue 2) Update TCP tracker to deal with keepalive packet after re-registration, from Franceso Ruggeri. 3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly, from Georg Kohmann. 4) Fix bogus packet drop in ebtables nat extensions, from Thimothee Cocault. 5) Fix typo in flowtable documentation. 6) Reset skb timestamp in nft_fwd_netdev. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22Merge tag 'ext4_for_linus' of ↵Linus Torvalds2-0/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The siginificant new ext4 feature this time around is Harshad's new fast_commit mode. In addition, thanks to Mauricio for fixing a race where mmap'ed pages that are being changed in parallel with a data=journal transaction commit could result in bad checksums in the failure that could cause journal replays to fail. Also notable is Ritesh's buffered write optimization which can result in significant improvements on parallel write workloads. (The kernel test robot reported a 330.6% improvement on fio.write_iops on a 96 core system using DAX) Besides that, we have the usual miscellaneous cleanups and bug fixes" Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: fix invalid inode checksum ext4: add fast commit stats in procfs ext4: add a mount opt to forcefully turn fast commits on ext4: fast commit recovery path jbd2: fast commit recovery path ext4: main fast-commit commit path jbd2: add fast commit machinery ext4 / jbd2: add fast commit initialization ext4: add fast_commit feature and handling for extended mount options doc: update ext4 and journalling docs to include fast commit feature ext4: Detect already used quota file early jbd2: avoid transaction reuse after reformatting ext4: use the normal helper to get the actual inode ext4: fix bs < ps issue reported with dioread_nolock mount opt ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() ext4: data=journal: fixes for ext4_page_mkwrite() jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers() jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable() ext4: use ext4_sb_bread() instead of sb_bread() ...
2020-10-22Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-74/+2
Pull nfsd updates from Bruce Fields: "The one new feature this time, from Anna Schumaker, is READ_PLUS, which has the same arguments as READ but allows the server to return an array of data and hole extents. Otherwise it's a lot of cleanup and bugfixes" * tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits) NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy SUNRPC: fix copying of multiple pages in gss_read_proxy_verf() sunrpc: raise kernel RPC channel buffer size svcrdma: fix bounce buffers for unaligned offsets and multiple pages nfsd: remove unneeded break net/sunrpc: Fix return value for sysctl sunrpc.transports NFSD: Encode a full READ_PLUS reply NFSD: Return both a hole and a data segment NFSD: Add READ_PLUS hole segment encoding NFSD: Add READ_PLUS data support NFSD: Hoist status code encoding into XDR encoder functions NFSD: Map nfserr_wrongsec outside of nfsd_dispatch NFSD: Remove the RETURN_STATUS() macro NFSD: Call NFSv2 encoders on error returns NFSD: Fix .pc_release method for NFSv2 NFSD: Remove vestigial typedefs NFSD: Refactor nfsd_dispatch() error paths NFSD: Clean up nfsd_dispatch() variables NFSD: Clean up stale comments in nfsd_dispatch() NFSD: Clean up switch statement in nfsd_dispatch() ...
2020-10-21doc: update ext4 and journalling docs to include fast commit featureHarshad Shirwadkar2-0/+99
This patch adds necessary documentation for fast commits. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21Documentation: kvm: fix some typos in cpuid.rstOliver Upton1-44/+44
Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Change-Id: I0c6355b09fedf8f9cc4cc5f51be418e2c1c82b7b Message-Id: <20200818152429.1923996-5-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21kvm: x86: only provide PV features if enabled in guest's CPUIDOliver Upton1-0/+11
KVM unconditionally provides PV features to the guest, regardless of the configured CPUID. An unwitting guest that doesn't check KVM_CPUID_FEATURES before use could access paravirt features that userspace did not intend to provide. Fix this by checking the guest's CPUID before performing any paravirtual operations. Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the aforementioned enforcement. Migrating a VM from a host w/o this patch to a host with this patch could silently change the ABI exposed to the guest, warranting that we default to the old behavior and opt-in for the new one. Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98 Message-Id: <20200818152429.1923996-4-oupton@google.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21Documentation: kvm: fix a typoLi Qiang1-1/+1
Fixes: e287d6de62f74 ("Documentation: kvm: Convert cpuid.txt to .rst") Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20201001095333.7611-1-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21KVM: VMX: Forbid userspace MSR filters for x2APICPaolo Bonzini1-8/+10
Allowing userspace to intercept reads to x2APIC MSRs when APICV is fully enabled for the guest simply can't work. But more in general, the LAPIC could be set to in-kernel after the MSR filter is setup and allowing accesses by userspace would be very confusing. We could in principle allow userspace to intercept reads and writes to TPR, and writes to EOI and SELF_IPI, but while that could be made it work, it would still be silly. Cc: Alexander Graf <graf@amazon.com> Cc: Aaron Lewis <aaronlewis@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21KVM: VMX: Ignore userspace MSR filters for x2APICSean Christopherson1-11/+16
Rework the resetting of the MSR bitmap for x2APIC MSRs to ignore userspace filtering. Allowing userspace to intercept reads to x2APIC MSRs when APICV is fully enabled for the guest simply can't work; the LAPIC and thus virtual APIC is in-kernel and cannot be directly accessed by userspace. To keep things simple we will in fact forbid intercepting x2APIC MSRs altogether, independent of the default_allow setting. Cc: Alexander Graf <graf@amazon.com> Cc: Aaron Lewis <aaronlewis@google.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20201005195532.8674-3-sean.j.christopherson@intel.com> [Modified to operate even if APICv is disabled, adjust documentation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-21docs: submitting-patches: describe preserving review/test tagsKrzysztof Kozlowski1-0/+7
From time to time, the novice kernel contributors do not add Reviewed-by or Tested-by tags to the next versions of the patches. Mostly because they are unaware that responsibility of adding these tags in next version is on submitter, not maintainer. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201013162725.13572-1-krzk@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21Documentation: Chinese translation of Documentation/arm64/hugetlbpage.rstBailu Lin3-0/+48
This is a Chinese translated version of Documentation/arm64/hugetlbpage.rst Signed-off-by: Bailu Lin <bailu.lin@vivo.com> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Link: https://lore.kernel.org/r/20201014022003.43862-1-bailu.lin@vivo.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21Documentation: x86: fix a missing word in x86_64/mm.rst.Wei Lin Chang1-1/+1
This patch adds a missing word in x86/x86_64/mm.rst, without which the note reads awkwardly. Signed-off-by: Wei Lin Chang <r09922117@csie.ntu.edu.tw> Link: https://lore.kernel.org/r/20201015062242.26296-1-r09922117@csie.ntu.edu.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21docs: driver-api: remove a duplicated index entryMauro Carvalho Chehab1-1/+0
The ipmb file was added twice at index.rst. That sounds to be because the same patch was applied twice, via different git trees: commit f6ae22d64433fd8e08654adad7966299da931bb9 Author: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Commit: Jonathan Corbet <corbet@lwn.net> docs: ipmb: place it at driver-api and convert to ReST commit ac499fba98c3c65078fd84fa0a62cd6f6d5837ed Author: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Commit: Corey Minyard <cminyard@mvista.com> docs: ipmb: place it at driver-api and convert to ReST With Sphinx 4.0.0 development tree, a new warning is produced due to that: .../Documentation/driver-api/index.rst:14: WARNING: duplicated entry found in toctree: driver-api/ipmb The fix is trivial: just drop the duplicated line. Fixes: f6ae22d64433 ("docs: ipmb: place it at driver-api and convert to ReST") Fixes: ac499fba98c3 ("docs: ipmb: place it at driver-api and convert to ReST") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/623fb26a8409a7b002e45bdbb6f517ac08fd508a.1602753121.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21docs: lkdtm: Modernize and improve detailsKees Cook1-23/+33
The details on using LKDTM were overly obscure. Modernize the details and expand examples to better illustrate how to use the interfaces. Additionally add missing SPDX header. Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201015224559.2137489-1-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21docs: deprecated.rst: Expand str*cpy() replacement notesKees Cook1-18/+26
The notes on replacing the deprecated str*cpy() functions didn't call enough attention to the change in return type. Add these details and clean up the language a bit more. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20201015231730.2138505-1-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21docs/cpu-load: format the example code.Hui Su1-30/+33
format the example code. Signed-off-by: Hui Su <sh_def@163.com> Link: https://lore.kernel.org/r/20201018170557.GA7670@rlk Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-21Merge tag 'linux-watchdog-5.10-rc1' of ↵Linus Torvalds1-0/+54
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Toshiba Visconti watchdog driver - it87_wdt: add IT8772 + IT8784 - several fixes and improvements * tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add Toshiba Visconti watchdog driver watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: it87_wdt: add IT8784 ID watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3 watchdog: renesas_wdt: support handover from bootloader watchdog: imx7ulp: Watchdog should continue running for wait/stop mode watchdog: rti: Simplify with dev_err_probe() watchdog: davinci: Simplify with dev_err_probe() watchdog: cadence: Simplify with dev_err_probe() watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h> watchdog: Use put_device on error watchdog: Fix memleak in watchdog_cdev_register watchdog: imx7ulp: Strictly follow the sequence for wdog operations watchdog: it87_wdt: add IT8772 ID watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed drivers: watchdog: rdc321x_wdt: Fix race condition bugs
2020-10-21Merge tag 'rtc-5.10' of ↵Linus Torvalds3-1/+88
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A new driver this cycle is making the bulk of the changes and the rx8010 driver has been rework to use the modern APIs. Summary: Subsystem: - new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt New driver: - Microcrystal RV-3032 Drivers: - ds1307: use aux-voltage-chargeable - r9701, rx8010: modernization of the driver - rv3028: fix clock output, trickle resistor values, RAM configuration registers" * tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) rtc: r9701: set range rtc: r9701: convert to devm_rtc_allocate_device rtc: r9701: stop setting RWKCNT rtc: r9701: remove useless memset rtc: r9701: stop setting a default time rtc: r9701: remove leftover comment rtc: rv3032: Add a driver for Microcrystal RV-3032 dt-bindings: rtc: rv3032: add RV-3032 bindings dt-bindings: rtc: add trickle-voltage-millivolt rtc: rv3028: ensure ram configuration registers are saved rtc: rv3028: factorize EERD bit handling rtc: rv3028: fix trickle resistor values rtc: rv3028: fix clock output support rtc: mt6397: Remove unused member dev rtc: rv8803: simplify the return expression of rv8803_nvram_write rtc: meson: simplify the return expression of meson_vrtc_probe rtc: rx8010: rename rx8010_init_client() to rx8010_init() rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally rtc: ds1307: consider aux-voltage-chargeable rtc: ds1307: store previous charge default per chip ...
2020-10-21Merge branch 'i2c/for-5.10' of ↵Linus Torvalds9-11/+159
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ...
2020-10-21Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds1-3/+3
Pull ceph updates from Ilya Dryomov: - a patch that removes crush_workspace_mutex (myself). CRUSH computations are no longer serialized and can run in parallel. - a couple new filesystem client metrics for "ceph fs top" command (Xiubo Li) - a fix for a very old messenger bug that affected the filesystem, marked for stable (myself) - assorted fixups and cleanups throughout the codebase from Jeff and others. * tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits) libceph: clear con->out_msg on Policy::stateful_server faults libceph: format ceph_entity_addr nonces as unsigned libceph: fix ENTITY_NAME format suggestion libceph: move a dout in queue_con_delay() ceph: comment cleanups and clarifications ceph: break up send_cap_msg ceph: drop separate mdsc argument from __send_cap ceph: promote to unsigned long long before shifting ceph: don't SetPageError on readpage errors ceph: mark ceph_fmt_xattr() as printf-like for better type checking ceph: fold ceph_update_writeable_page into ceph_write_begin ceph: fold ceph_sync_writepages into writepage_nounlock ceph: fold ceph_sync_readpages into ceph_readpage ceph: don't call ceph_update_writeable_page from page_mkwrite ceph: break out writeback of incompatible snap context to separate function ceph: add a note explaining session reject error string libceph: switch to the new "osd blocklist add" command libceph, rbd, ceph: "blacklist" -> "blocklist" ceph: have ceph_writepages_start call pagevec_lookup_range_tag ceph: use kill_anon_super helper ...
2020-10-21Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas2-3/+8
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad Prabhakar) - Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint test (Lad Prabhakar) - Add device tree support for R8A7742 (Lad Prabhakar) - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) * remotes/lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7742 PCI: rcar-gen2: Use fallthrough pseudo-keyword misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller dt-bindings: pci: rcar-pci-ep: Document r8a774e1 misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1
2020-10-21Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas3-6/+17
- Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check
2020-10-21Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas1-7/+49
- Make PCIE_BRCMSTB depend on and default to ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for 7278, 7216, 7211, and new properties (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add control of RESCAL reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add bcm7211, bcm7216, bcm7445, bcm7278 to match list (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list PCI: brcmstb: Set bus max burst size by chip type PCI: brcmstb: Accommodate MSI for older chips PCI: brcmstb: Set additional internal memory DMA viewport sizes PCI: brcmstb: Add control of rescal reset PCI: brcmstb: Add bcm7278 PERST# support PCI: brcmstb: Add suspend and resume pm_ops PCI: brcmstb: Add bcm7278 register info dt-bindings: PCI: Add bindings for more Brcmstb chips PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
2020-10-21xen-blkfront: Apply changed parameter name to the documentSeongJae Park1-1/+1
Commit 14e710fe7897 ("xen-blkfront: rename indirect descriptor parameter") changed the name of the module parameter for the maximum amount of segments in indirect requests but missed updating the document. This commit updates the document. Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-4-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-21xen-blkfront: add a parameter for disabling of persistent grantsSeongJae Park1-0/+9
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. It can be disabled from blkback side using a module parameter, 'feature_persistent'. But, it is impossible from blkfront side. For the reason, this commit adds a blkfront module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-3-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-21xen-blkback: add a parameter for disabling of persistent grantsSeongJae Park1-0/+9
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. But, there is no option to disable it. For the reason, this commit adds a module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: Anthony Liguori <aliguori@amazon.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-2-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-20netsec: ignore 'phy-mode' device property on ACPI systemsArd Biesheuvel1-1/+3
Since commit bbc4d71d63549bc ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the Realtek PHY driver will override any TX/RX delay set by hardware straps if the phy-mode device property does not match. This is causing problems on SynQuacer based platforms (the only SoC that incorporates the netsec hardware), since many were built with this Realtek PHY, and shipped with firmware that defines the phy-mode as 'rgmii', even though the PHY is configured for TX and RX delay using pull-ups. From the driver's perspective, we should not make any assumptions in the general case that the PHY hardware does not require any initial configuration. However, the situation is slightly different for ACPI boot, since it implies rich firmware with AML abstractions to handle hardware details that are not exposed to the OS. So in the ACPI case, it is reasonable to assume that the PHY comes up in the right mode, regardless of whether the mode is set by straps, by boot time firmware or by AML executed by the ACPI interpreter. So let's ignore the 'phy-mode' device property when probing the netsec driver in ACPI mode, and hardcode the mode to PHY_INTERFACE_MODE_NA, which should work with any PHY provided that it is configured by the time the driver attaches to it. While at it, document that omitting the mode is permitted for DT probing as well, by setting the phy-mode DT property to the empty string. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201018163625.2392-1-ardb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21Merge tag 'drm-misc-next-fixes-2020-10-20' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next Two patches to prevent out-of-bands accesses on fonts buffers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201020141445.4jisqylfbusdnzge@gilmour
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd3-70/+106
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk