| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Remove unnecessary locking around _OSC (Bjorn Helgaas)
- Clarify message about _OSC failure (Bjorn Helgaas)
- Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
- Tidy checking of syscall user config accessors (Heiner Kallweit)
Resource management:
- Decline to resize resources if boot config must be preserved (Ard
Biesheuvel)
- Fix pci_register_io_range() memory leak (Geert Uytterhoeven)
Error handling (Keith Busch):
- Clear error status from the correct device
- Retain error recovery status so drivers can use it after reset
- Log the type of Port (Root or Switch Downstream) that we reset
- Always request a reset for Downstream Ports in frozen state
Endpoint framework and NTB (Kishon Vijay Abraham I):
- Make *_get_first_free_bar() take into account 64 bit BAR
- Add helper API to get the 'next' unreserved BAR
- Make *_free_bar() return error codes on failure
- Remove unused pci_epf_match_device()
- Add support to associate secondary EPC with EPF
- Add support in configfs to associate two EPCs with EPF
- Add pci_epc_ops to map MSI IRQ
- Add pci_epf_ops to expose function-specific attrs
- Allow user to create sub-directory of 'EPF Device' directory
- Implement ->msi_map_irq() ops for cadence
- Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
- Add EP function driver to provide NTB functionality
- Add support for EPF PCI Non-Transparent Bridge
- Add specification for PCI NTB function device
- Add PCI endpoint NTB function user guide
- Add configfs binding documentation for pci-ntb endpoint function
Broadcom STB PCIe controller driver:
- Add support for BCM4908 and external PERST# signal controller
(Rafał Miłecki)
Cadence PCIe controller driver:
- Retrain Link to work around Gen2 training defect (Nadeem Athani)
- Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
Wilczyński)
Freescale Layerscape PCIe controller driver:
- Add LX2160A rev2 EP mode support (Hou Zhiqiang)
- Convert to builtin_platform_driver() (Michael Walle)
MediaTek PCIe controller driver:
- Fix OF node reference leak (Krzysztof Wilczyński)
Microchip PolarFlare PCIe controller driver:
- Add Microchip PolarFire PCIe controller driver (Daire McNamara)
Qualcomm PCIe controller driver:
- Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
- Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Drop PCIE_RCAR config option (Lad Prabhakar)
- Always allocate MSI addresses in 32bit space (Marek Vasut)
Rockchip PCIe controller driver:
- Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)
Synopsys DesignWare PCIe controller driver:
- Work around ECRC configuration hardware defect (Vidya Sagar)
- Drop support for config space in DT 'ranges' (Rob Herring)
- Change size to u64 for EP outbound iATU (Shradha Todi)
- Add upper limit address for outbound iATU (Shradha Todi)
- Make dw_pcie ops optional (Jisheng Zhang)
- Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Fix OF node reference leak (Pan Bian)
Miscellaneous:
- Remove tango host controller driver (Arnd Bergmann)
- Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
(Martin Kaiser)
- Fix xgene-msi race in installing chained IRQ handler (Martin
Kaiser)
- Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
- Fix pci-bridge-emul array overruns (Russell King)
- Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
Siewior)"
* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: qcom: Add support for ddrss_sf_tbu clock
dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
PCI: al: Remove useless dw_pcie_ops
PCI: dwc: Don't assume the ops in dw_pcie always exist
PCI: dwc: Add upper limit address for outbound iATU
PCI: dwc: Change size to u64 for EP outbound iATU
PCI: dwc: Drop support for config space in 'ranges'
PCI: layerscape: Convert to builtin_platform_driver()
PCI: layerscape: Add LX2160A rev2 EP mode support
dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
PCI: dwc: Work around ECRC configuration issue
PCI/portdrv: Report reset for frozen channel
PCI/AER: Specify the type of Port that was reset
PCI/ERR: Retain status from error notification
PCI/AER: Clear AER status from Root Port when resetting Downstream Port
PCI/ERR: Clear status of the reporting device
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
PCI: rockchip: Make 'ep-gpios' DT property optional
Documentation: PCI: Add PCI endpoint NTB function user guide
...
|
|
Merge misc updates from Andrew Morton:
"A few small subsystems and some of MM.
172 patches.
Subsystems affected by this patch series: hexagon, scripts, ntfs,
ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
mempolicy, oom-kill, hugetlbfs, and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
mm/migrate: remove unneeded semicolons
hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
hugetlbfs: fix some comment typos
hugetlbfs: correct some obsolete comments about inode i_mutex
hugetlbfs: make hugepage size conversion more readable
hugetlbfs: remove meaningless variable avoid_reserve
hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
hugetlbfs: remove special hugetlbfs_set_page_dirty()
mm/hugetlb: change hugetlb_reserve_pages() to type bool
mm, oom: fix a comment in dump_task()
mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
numa balancing: migrate on fault among multiple bound nodes
mm, compaction: make fast_isolate_freepages() stay within zone
mm/compaction: fix misbehaviors of fast_find_migrateblock()
mm/compaction: correct deferral logic for proactive compaction
mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
mm/compaction: remove rcu_read_lock during page compaction
z3fold: simplify the zhdr initialization code in init_z3fold_page()
...
|
|
I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation. I noticed that the bits in the documentation didn't
match the bits in the #defines.
The VM never explicitly checks the RECLAIM_ZONE bit. The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'. The
RECLAIM_ZONE #define was removed in a cleanup. That, by itself is fine.
But, when the bit was removed (bit 0) the _other_ bit locations also got
changed. That's not OK because the bit values are documented to mean
one specific thing. Users surely do not expect the meaning to change
from kernel to kernel.
The end result is that if someone had a script that did:
sysctl vm.zone_reclaim_mode=1
it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.
Put the bits back the way they were and add a comment so something like
this is a bit harder to do again. Update the documentation to make it
clear that the first bit is ignored.
Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf368e0 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The generated html will link to the definition of the gfp_t automatically
once we define it. Move the one-paragraph overview of GFP flags from the
documentation directory into gfp.h and pull gfp.h into the documentation.
This generates warnings with clang
(https://lkml.kernel.org/r/20210219195509.GA59987@24bbad8f3778), so
use a #if 0 to hide it from the compiler for now.
Link: https://lkml.kernel.org/r/20210215204909.3824509-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20210220003049.GZ2858050@casper.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename CONFIG_TEST_KASAN_MODULE to CONFIG_KASAN_MODULE_TEST.
This naming is more consistent with the existing CONFIG_KASAN_KUNIT_TEST.
Link: https://linux-review.googlesource.com/id/Id347dfa5fe8788b7a1a189863e039f409da0ae5f
Link: https://lkml.kernel.org/r/f08250246683981bcf8a094fbba7c361995624d2.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mention in the documentation that enabling CONFIG_KASAN_HW_TAGS always
results in in-kernel TBI (Top Byte Ignore) being enabled.
Also do a few minor documentation cleanups.
Link: https://linux-review.googlesource.com/id/Iba2a6697e3c6304cb53f89ec61dedc77fa29e3ae
Link: https://lkml.kernel.org/r/3b4ea6875bb14d312092ad14ac55cb456c83c08e.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds swapcache stat for the cgroup v2. The swapcache
represents the memory that is accounted against both the memory and the
swap limit of the cgroup. The main motivation behind exposing the
swapcache stat is for enabling users to gracefully migrate from cgroup
v1's memsw counter to cgroup v2's memory and swap counters.
Cgroup v1's memsw limit allows users to limit the memory+swap usage of a
workload but without control on the exact proportion of memory and swap.
Cgroup v2 provides separate limits for memory and swap which enables more
control on the exact usage of memory and swap individually for the
workload.
With some little subtleties, the v1's memsw limit can be switched with the
sum of the v2's memory and swap limits. However the alternative for memsw
usage is not yet available in cgroup v2. Exposing per-cgroup swapcache
stat enables that alternative. Adding the memory usage and swap usage and
subtracting the swapcache will approximate the memsw usage. This will
help in the transparent migration of the workloads depending on memsw
usage and limit to v2' memory and swap counters.
The reasons these applications are still interested in this approximate
memsw usage are: (1) these applications are not really interested in two
separate memory and swap usage metrics. A single usage metric is more
simple to use and reason about for them.
(2) The memsw usage metric hides the underlying system's swap setup from
the applications. Applications with multiple instances running in a
datacenter with heterogeneous systems (some have swap and some don't) will
keep seeing a consistent view of their usage.
[akpm@linux-foundation.org: fix CONFIG_SWAP=n build]
Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/debug_vm_pgtable: Some minor updates", v3.
This series contains some cleanups and new test suggestions from Catalin
from an earlier discussion.
https://lore.kernel.org/linux-mm/20201123142237.GF17833@gaia/
This patch (of 2):
This adds validation tests for dirtiness after write protect conversion
for each page table level. There are two new separate test types involved
here.
The first test ensures that a given page table entry does not become dirty
after pxx_wrprotect(). This is important for platforms like arm64 which
transfers and drops the hardware dirty bit (!PTE_RDONLY) to the software
dirty bit while making it an write protected one. This test ensures that
no fresh page table entry could be created with hardware dirty bit set.
The second test ensures that a given page table entry always preserve the
dirty information across pxx_wrprotect().
This adds two previously missing PUD level basic tests and while here
fixes pxx_wrprotect() related typos in the documentation file.
Link: https://lkml.kernel.org/r/1611137241-26220-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1611137241-26220-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The boot param and config determine the value of memcg_sysfs_enabled,
which is unused since commit 10befea91b61 ("mm: memcg/slab: use a single
set of kmem_caches for all allocations") as there are no per-memcg kmem
caches anymore.
Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)
- Add FriendlyARM NanoPi M4B to rockchip DT binding (Chen-Yu Tsai)
* pci/rockchip:
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
PCI: rockchip: Make 'ep-gpios' DT property optional
|
|
- Add support for SM8250 PCIe SF TBU clock (Dmitry Baryshkov)
- Use PHY_REFCLK_USE_PAD only for qcom ipq8064 (Ansuel Smith)
* pci/qcom:
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: qcom: Add support for ddrss_sf_tbu clock
dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
|
|
- Account for 64-bit BARs in pci_epc_get_first_free_bar() (Kishon Vijay
Abraham I)
- Add pci_epc_get_next_free_bar() helper (Kishon Vijay Abraham I)
- Return error codes on failure of endpoint BAR interfaces (Kishon Vijay
Abraham I)
- Remove unused pci_epf_match_device() (Kishon Vijay Abraham I)
- Add support for secondary endpoint controller to prepare for NTB endpoint
functionality (Kishon Vijay Abraham I)
- Add configfs support for secondary endpoint controller (Kishon Vijay
Abraham I)
- Add MSI address mapping ops for NTB doorbell support (Kishon Vijay
Abraham I)
- Add ops for endpoint function-specific attributes (Kishon Vijay Abraham
I)
- Allow configfs subdirectory for endpoint function configuration (Kishon
Vijay Abraham I)
- Implement cadence MSI address mapping ops (Kishon Vijay Abraham I)
- Configure cadence LM_EP_FUNC_CFG based on epc->function_num_map (Kishon
Vijay Abraham I)
- Add endpoint-side driver to provide NTB functionality (Kishon Vijay
Abraham I)
- Add host-side driver for generic EPF NTB functionality (Kishon Vijay
Abraham I)
- Document NTB endpoint functionality (Kishon Vijay Abraham I)
* pci/ntb:
Documentation: PCI: Add PCI endpoint NTB function user guide
Documentation: PCI: Add configfs binding documentation for pci-ntb endpoint function
NTB: Add support for EPF PCI Non-Transparent Bridge
PCI: Add TI J721E device to PCI IDs
PCI: endpoint: Add EP function driver to provide NTB functionality
PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map
PCI: cadence: Implement ->msi_map_irq() ops
PCI: endpoint: Allow user to create sub-directory of 'EPF Device' directory
PCI: endpoint: Add pci_epf_ops to expose function-specific attrs
PCI: endpoint: Add pci_epc_ops to map MSI IRQ
PCI: endpoint: Add support in configfs to associate two EPCs with EPF
PCI: endpoint: Add support to associate secondary EPC with EPF
PCI: endpoint: Remove unused pci_epf_match_device()
PCI: endpoint: Make *_free_bar() to return error codes on failure
PCI: endpoint: Add helper API to get the 'next' unreserved BAR
PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
Documentation: PCI: Add specification for the PCI NTB function device
|
|
- Call platform_set_drvdata() earlier so drivers can do window setup in
init functions instead of custom probe (Daire McNamara)
- Add DT binding and host mode driver for Microchip PolarFire PCIe
controller (Daire McNamara)
* pci/microchip:
MAINTAINERS: Add Daire McNamara as Microchip PCIe driver maintainer
PCI: microchip: Add Microchip PolarFire PCIe controller driver
dt-bindings: PCI: microchip: Add Microchip PolarFire host binding
PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge
|
|
- Add Layerscape LX2160A rev2 endpoint mode support (Hou Zhiqiang)
- Convert layerscape to builtin_platform_driver() (Michael Walle)
* pci/layerscape:
PCI: layerscape: Convert to builtin_platform_driver()
PCI: layerscape: Add LX2160A rev2 EP mode support
dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
|
|
On SM8250 additional clock is required for PCIe devices to access NOC.
Document this requirement in devicetree bindings.
Link: https://lore.kernel.org/r/20210117013114.441973-2-dmitry.baryshkov@linaro.org
Fixes: 458168247ccc ("dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds remoteproc support for the audio, compute, sensor and modem
remoteprocs on the Qualcomm SM8350 platform, it adds Qualcomm WCN3660b
support, Mediatek MT8192 SCP driver support for MPU and L1TCM memory,
STM32 driver adopts dev_err_probe() and the Qualcomm Kconfig help
texts are revamped"
* tag 'rproc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: qcom: pas: Add SM8350 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8350 remoteprocs
remoteproc: core: Fix rproc->firmware free in rproc_set_firmware()
remoteproc/mediatek: support L1TCM
dt-bindings: remoteproc: mediatek: add L1TCM memory region
remoteproc/mediatek: enable MPU for all memory regions in MT8192 SCP
remoteproc/mediatek: use devm_platform_ioremap_resource_byname
remoteproc: ingenic: Add module parameter 'auto_boot'
remoteproc/mediatek: acknowledge watchdog IRQ after handled
remoteproc: qcom_wcnss: remove unneeded semicolon
remoteproc: qcom: fix glink dependencies
remoteproc: stm32: improve debug using dev_err_probe
remoteproc: qcom: add more help text qcom options
remoteproc: qcom_wcnss: Add qcom,wcn3660b compatible
dt-bindings: remoteproc: qcom,wcnss: Add qcom,wcn3660b compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"Add support for the hardware spinlock in the TI K3 AM64x SoC"
* tag 'hwlock-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
hwspinlock: omap: Add support for K3 AM64x SoCs
dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
In commit 9669f51de5c0 I tried to get rid of the undocumented cow gc
lifetime knob. The knob's function was never documented and it now
doesn't really have a function since eof and cow gc have been
consolidated.
Regrettably, xfs/231 relies on it and regresses on for-next. I did not
succeed at getting far enough through fstests patch review for the fixup
to land in time.
Restore the sysctl knob, document what it did (does?), put it on the
deprecation schedule, and rip out a redundant function.
Fixes: 9669f51de5c0 ("xfs: consolidate the eofblocks and cowblocks workers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / debugfs update from Greg KH:
"Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in
linux-next for the past few weeks, when Saravana tried to set
fw_devlink=on as the default functionality. This caused a number of
systems to stop booting, and lots of bugs were fixed in this area for
almost all of the reported systems, but this option is not ready to be
turned on just yet for the default operation based on this testing, so
I've reverted that change at the very end so we don't have to worry
about regressions in 5.12
We will try to turn this on for 5.13 if testing goes better over the
next few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their remove
callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change"
* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Revert "driver core: Set fw_devlink=on by default"
of: property: fw_devlink: Ignore interrupts property for some configs
debugfs: do not attempt to create a new file before the filesystem is initalized
debugfs: be more robust at handling improper input in debugfs_lookup()
driver core: auxiliary bus: Fix calling stage for auxiliary bus init
of: irq: Fix the return value for of_irq_parse_one() stub
of: irq: make a stub for of_irq_parse_one()
clk: Mark fwnodes when their clock provider is added/removed
PM: domains: Mark fwnodes when their powerdomain is added/removed
irqdomain: Mark fwnodes when their irqdomain is added/removed
driver core: fw_devlink: Handle suppliers that don't use driver core
of: property: Add fw_devlink support for optional properties
driver core: Add fw_devlink.strict kernel param
of: property: Don't add links to absent suppliers
driver core: fw_devlink: Detect supplier devices that will never be added
driver core: platform: Emit a warning if a remove callback returned non-zero
of: property: Fix fw_devlink handling of interrupts/interrupts-extended
gpiolib: Don't probe gpio_device if it's not the primary device
device.h: Remove bogus "the" in kerneldoc
gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- sprd: fix a macro value
- omap: support for K3 AM64x
- tegra: fix lockdep warnings
- qcom: support for SDX55 and SC8180X
- arm: fixes for sparse, kfree and void return
* tag 'mailbox-v5.12' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: arm_mhuv2: Skip calling kfree() with invalid pointer
mailbox: tegra-hsp: Set lockdep class dynamically
mailbox: sprd: correct definition of SPRD_OUTBOX_FIFO_FULL
mailbox: arm_mhuv2: make remove callback return void
mailbox: arm_mhuv2: Fix sparse warnings
mailbox: qcom: Add support for SDX55 APCS IPC
dt-bindings: mailbox: Add binding for SDX55 APCS
mailbox: omap: Add support for K3 AM64x SoCs
dt-bindings: mailbox: omap: Update binding for AM64x SoCs
mailbox: qcom: Add SC8180X apcs compatible
dt-bindings: mailbox: qcom: Add SC8180X APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull initial support for CXL (Compute Express Link) from Dan Williams:
"Introduce an initial driver for CXL 2.0 Type-3 Memory Devices.
CXL is Compute Express Link which released the 2.0 specification in
November. The Linux relevant changes in CXL 2.0 are support for an OS
to dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug.
A Type-3 Memory Device is a PCI enumerated device presenting the CXL
Memory Device Class Code and implementing the CXL.mem protocol.
CXL.mem allows device to advertise CPU and I/O coherent memory to the
system, i.e. typical "System RAM" and "Persistent Memory" in Linux
/proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative
command hardware mailbox interface for maintenance and provisioning.
It is this command interface that is the focus of the initial driver.
With this driver a CXL device that is mapped by the BIOS can be
administered by Linux.
Linux support for CXL PMEM and dynamic CXL address space management
are to be implemented post v5.12"
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
4cdadfd5e0a7 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints")
13237183c735 ("cxl/mem: Add a "RAW" send command")
472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
57ee605b976c ("cxl/mem: Add set of informational commands")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
8adaf747c9f0 ("cxl/mem: Find device capabilities")
b39cb1052a5c ("cxl/mem: Register CXL memX devices")
* tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/mem: Fix potential memory leak
cxl/mem: Return -EFAULT if copy_to_user() fails
MAINTAINERS: Add maintainers of the CXL driver
cxl/mem: Add set of informational commands
cxl/mem: Enable commands via CEL
cxl/mem: Add a "RAW" send command
cxl/mem: Add basic IOCTL interface
cxl/mem: Register CXL memX devices
cxl/mem: Find device capabilities
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
|
|
Add PCIe Endpoint mode compatible string "fsl,lx2160ar2-pcie-ep"
Link: https://lore.kernel.org/r/20201026051448.1913-1-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Some devices, including most Microsoft Surface devices, have a platform
profile somewhere inbetween balanced and performance. More specifically,
adding this profile allows the following mapping on Surface devices:
Vendor Name Platform Profile
------------------------------------------
Battery Saver low-power
Recommended balanced
Better Performance balanced-performance
Best Performance performance
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For some reason, unevaluatedProperties doesn't work and
additionalProperties is required. Fix it by switching to
additionalProperties.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210218152837.1080819-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring updates from David Howells:
"Here's a set of minor keyrings fixes/cleanups that I've collected from
various people for the upcoming merge window.
A couple of them might, in theory, be visible to userspace:
- Make blacklist_vet_description() reject uppercase letters as they
don't match the all-lowercase hex string generated for a blacklist
search.
This may want reconsideration in the future, but, currently, you
can't add to the blacklist keyring from userspace and the only
source of blacklist keys generates lowercase descriptions.
- Fix blacklist_init() to use a new KEY_ALLOC_* flag to indicate that
it wants KEY_FLAG_KEEP to be set rather than passing KEY_FLAG_KEEP
into keyring_alloc() as KEY_FLAG_KEEP isn't a valid alloc flag.
This isn't currently a problem as the blacklist keyring isn't
currently writable by userspace.
The rest of the patches are cleanups and I don't think they should
have any visible effect"
* tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
watch_queue: rectify kernel-doc for init_watch()
certs: Replace K{U,G}IDT_INIT() with GLOBAL_ROOT_{U,G}ID
certs: Fix blacklist flag type confusion
PKCS#7: Fix missing include
certs: Fix blacklisted hexadecimal hash string check
certs/blacklist: fix kernel doc interface issue
crypto: public_key: Remove redundant header file from public_key.h
keys: remove trailing semicolon in macro definition
crypto: pkcs7: Use match_string() helper to simplify the code
PKCS#7: drop function from kernel-doc pkcs7_validate_trust_one
encrypted-keys: Replace HTTP links with HTTPS ones
crypto: asymmetric_keys: fix some comments in pkcs7_parser.h
KEYS: remove redundant memset
security: keys: delete repeated words in comments
KEYS: asymmetric: Fix kerneldoc
security/keys: use kvfree_sensitive()
watch_queue: Drop references to /dev/watch_queue
keys: Remove outdated __user annotations
security: keys: Fix fall-through warnings for Clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"We have couple of drivers removed a new driver and bunch of new device
support and few updates to drivers for this round.
New drivers/devices:
- Intel LGM SoC DMA driver
- Actions Semi S500 DMA controller
- Renesas r8a779a0 dma controller
- Ingenic JZ4760(B) dma controller
- Intel KeemBay AxiDMA controller
Removed:
- Coh901318 dma driver
- Zte zx dma driver
- Sirfsoc dma driver
Updates:
- mmp_pdma, mmp_tdma gained module support
- imx-sdma become modern and dropped platform data support
- dw-axi driver gained slave and cyclic dma support"
* tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
dmaengine: dw-axi-dmac: remove redundant null check on desc
dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT
dmaengine: dw-axi-dmac: Virtually split the linked-list
dmaengine: dw-axi-dmac: Set constraint to the Max segment size
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC
dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
dmaengine: dw-axi-dmac: Support burst residue granularity
dmaengine: dw-axi-dmac: Support of_dma_controller_register()
dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
dmaengine: dw-axi-dmac: Support device_prep_slave_sg
dmaengine: dw-axi-dmac: Add device_config operation
dmaengine: dw-axi-dmac: Add device_synchronize() callback
dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()
dmaengine: dw-axi-dmac: simplify descriptor management
dt-bindings: dma: Add YAML schemas for dw-axi-dmac
dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Mostly existing driver fixes plus a new driver for game controllers
directly connected to Nintendo 64, and an enhancement for keyboards
driven by Chrome OS EC to communicate layout of the top row to
userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits)
Input: st1232 - fix NORMAL vs. IDLE state handling
Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit
Input: alps - fix spelling of "positive"
ARM: dts: cros-ec-keyboard: Use keymap macros
dt-bindings: input: Fix the keymap for LOCK key
dt-bindings: input: Create macros for cros-ec keymap
Input: cros-ec-keyb - expose function row physical map to userspace
dt-bindings: input: cros-ec-keyb: Add a new property describing top row
Input: applespi - fix occasional crc errors under load.
Input: applespi - don't wait for responses to commands indefinitely.
Input: st1232 - add IDLE state as ready condition
Input: zinitix - fix return type of zinitix_init_touch()
Input: i8042 - add ASUS Zenbook Flip to noselftest list
Input: add missing dependencies on CONFIG_HAS_IOMEM
Input: joydev - prevent potential read overflow in ioctl
Input: elo - fix an error code in elo_connect()
Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S
Input: sur40 - fix an error code in sur40_probe()
Input: elants_i2c - detect enum overflow
Input: zinitix - remove unneeded semicolon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
The NanoPi M4B is a minor revision of the original M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
Add a compatible string for the new board revision.
Link: https://lore.kernel.org/r/20210121162321.4538-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add documentation to help users use pci-epf-ntb function driver and
existing host side NTB infrastructure for NTB functionality.
[bhelgaas: fix a few typos]
Link: https://lore.kernel.org/r/20210201195809.7342-18-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
|
|
function
Add binding documentation for pci-ntb endpoint function that helps in
adding and configuring pci-ntb endpoint function.
Link: https://lore.kernel.org/r/20210201195809.7342-17-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Now that PCI endpoint core supports to add secondary endpoint controller
(EPC) with endpoint function (EPF), Add support in configfs to associate
two EPCs with EPF. This creates "primary" and "secondary" directory inside
the directory created by users for EPF device. Users have to add a symlink
of endpoint controller (pci_ep/controllers/) to "primary" or "secondary"
directory to bind EPF to primary and secondary EPF interfaces respectively.
Existing method of linking directory representing EPF device to directory
representing EPC device to associate a single EPC device with a EPF device
will continue to work.
Link: https://lore.kernel.org/r/20210201195809.7342-8-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add specification for the PCI NTB function device. The endpoint function
driver and the host PCI driver should be created based on this
specification.
[bhelgaas: fix a few typos]
Link: https://lore.kernel.org/r/20210201195809.7342-2-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add device tree bindings for the Microchip PolarFire PCIe controller
when configured in host (Root Complex) mode.
Link: https://lore.kernel.org/r/20210125162934.5335-3-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add syfs nodes for each xenbus device showing event statistics (number
of events and spurious events, number of associated event channels)
and for setting a spurious event threshold in case a frontend is
sending too many events without being rogue on purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210219154030.10892-7-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
- ACPI and OF support made more generic / decoupled. From Douglas Anderson
- support for Goodix devices from Douglas Anderson
|
|
- User experience improvements for hid-google from Nicolas Boichat
|
|
The top-row keys in a keyboard usually have dual functionalities.
E.g. A function key "F1" is also an action key "Browser back".
Therefore, when an application receives an action key code from
a top-row key press, the application needs to know how to correlate
the action key code with the function key code and do the conversion
whenever necessary.
Since the userpace already knows the key scanlines (row/column)
associated with a received key code. Essentially, the userspace only
needs a mapping between the key row/column and the matching physical
location in the top row.
So, enhance the cros-ec-keyb driver to create such a mapping
and expose it to userspace in the form of a function_row_physmap
attribute. The attribute would be a space separated ordered list of
row/column codes for the keys in the function row, in a left-to-right
order.
The attribute will only be present when the device has a custom design
for the top-row keys.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210115122412.v7.2.I6542d7d9d0b246e7079bb16b41e697b2ac4b4e39@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a new property `function-row-physmap` to the
device tree for the custom keyboard top row design.
The property describes the rows/columns of the top row keys
from left to right.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210115122412.v7.1.I025fb861cd5fa0ef5286b7dce514728e9df7ae74@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.12 kernel.
This time a calm set with no core changes.
New drivers/subdrivers:
- Renesas R8A7790A0 pin controller.
- Allwinner H616 and H616-R pin controllers.
- Qualcomm SM8350 and SC8180x pin controllers.
Improvements:
- Redo the DT bindings for Ralink RT2880.
- A common Qualcomm TLMM DT binding in YAML.
- Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"
* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
dt-bindings: pinctrl: Group tuples in pin control properties
pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
pinctrl: at91-pio4: add support for slew-rate
dt-bindings: pinctrl: at91-pio4: add slew-rate
pinctrl: actions: Add depends on || COMPILE_TEST
pinctrl: single: set function name when adding function
pinctrl: qcom: Add sc8180x TLMM driver
dt-bindings: pinctrl: qcom: Add sc8180x binding
dt-bindings: pinctrl: qcom: Define common TLMM binding
pinctrl: qcom: Add SM8350 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
pinctrl: samsung: use raw_spinlock for s3c64xx
dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
pinctrl: qcom: spmi-mpp: Add PM8019 compatible
pinctrl: pinmux: add function selector to pinmux-functions
pinctrl: samsung: use raw_spinlock for locking
pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
pinctrl: actions: Add the platform dependency to drivers
...
|
|
The Synopsis DesignWare APB timer driver
(drivers/clocksource/dw_apb_timer_of.c) indirectly uses the resets
property of its node as it executes the function of_reset_control_get().
Make sure that this property is documented in
timer/snps,dw-apb-timer.yaml to avoid make dtbs_check warnings.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The sifive gpio IP block supports up to 32 GPIOs. Reflect that in the
interrupts property description and maxItems. Also add the standard
ngpios property to describe the number of GPIOs available on the
implementation.
Also add the "canaan,k210-gpiohs" compatible string to indicate the use
of this gpio controller in the Canaan Kendryte K210 SoC. If this
compatible string is used, do not define the clocks property as
required as the K210 SoC does not have a software controllable clock
for the Sifive gpio IP block.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add the compatible string "canaan,k210-uarths" to the sifive uart
bindings to indicate the use of this IP block in the Canaan Kendryte
K210 SoC.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add the "canaan,k210-clint" compatible string to the Sifive clint
bindings to indicate the use of the "sifive,clint0" IP block in the
Canaan Kendryte K210 SoC. The description of the compatible string
property is also updated to reflect this addition.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add the compatible string "canaan,k210-plic" to the Sifive plic bindings
to indicate the use of the "sifive,plic-1.0.0" IP block in the Canaan
Kendryte K210 SoC. The description is also updated to reflect this
change, that is, that SoCs from other vendors may also use this plic
implementation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The Canaan Kendryte K210 SoC CPU cores are based on a rocket chip
version using a draft verion of the RISC-V ISA specifications. To avoid
any confusion with CPU cores using stable specifications, add the
compatible string "canaan,k210" for this SoC CPU cores.
Also add the "riscv,none" value to the mmu-type property to allow a DT
to indicate that the CPU being described does not have an MMU or that
it has an MMU that is not usable (which is the case for the K210 SoC).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
