summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15net: wwan: iosm: Fix htmldocs warningsM Chetan Kumar1-4/+4
Fixes .rst file warnings seen on linux-next build. Fixes: f7af616c632e ("net: iosm: infrastructure") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14dt-bindings: dwmac: Add bindings for new Ingenic SoCs.周琰杰 (Zhou Yanjie)2-0/+91
Add the dwmac bindings for the JZ4775 SoC, the X1000 SoC, the X1600 SoC, the X1830 SoC and the X2000 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14documentation: networking: devlink: add prestera switched driver DocumentationOleksandr Mazur1-0/+141
Add documentation for the devlink feature prestera switchdev driver supports: add description for the support of the driver-specific devlink traps (include both traps with action TRAP and action DROP); Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13net: iosm: infrastructureM Chetan Kumar3-0/+115
1) Kconfig & Makefile changes for IOSM Driver compilation. 2) Add IOSM Driver documentation. 3) Modified MAINTAINER file for IOSM Driver addition. Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: phy: Add 25G BASE-R interface modeSteen Hegelund1-0/+6
Add 25gbase-r phy interface mode Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12dt-bindings: net: Add 25G BASE-R phy interfaceSteen Hegelund1-0/+1
Add 25gbase-r PHY interface mode. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: ipa: introduce sysfs codeAlex Elder1-0/+78
Add IPA device attributes to expose information known by the IPA driver about the hardware and its configuration. All pointers used to display these attribute values (i.e., IPA pointer and endpoint pointers) will have been initialized by the time IPA probe has completed, so they may be safely dereferenced. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11Documentation: ACPI: DSD: Document MDIO PHYCalvin Johnson1-0/+133
Introduce a mechanism based on generic ACPI _DSD device properties definition [1] to get PHYs registered on a MDIO bus and provide them to be connected to MAC. [1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Describe properties "phy-handle" and "phy-mode". Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: dsa: generalize overhead for taggers that use both headers and trailersVladimir Oltean1-10/+11
Some really really weird switches just couldn't decide whether to use a normal or a tail tagger, so they just did both. This creates problems for DSA, because we only have the concept of an 'overhead' which can be applied to the headroom or to the tailroom of the skb (like for example during the central TX reallocation procedure), depending on the value of bool tail_tag, but not to both. We need to generalize DSA to cater for these odd switches by transforming the 'overhead / tail_tag' pair into 'needed_headroom / needed_tailroom'. The DSA master's MTU is increased to account for both. The flow dissector code is modified such that it only calls the DSA adjustment callback if the tagger has a non-zero header length. Taggers are trivially modified to declare either needed_headroom or needed_tailroom, based on the tail_tag value that they currently declare. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-09net/mlx5: Bridge, add tracepointsVlad Buslov1-0/+56
Move private bridge structures to dedicated headers that is accessible to bridge tracepoint header. Implemented following tracepoints: - Initialize FDB entry. - Refresh FDB entry. - Cleanup FDB entry. - Create VLAN. - Cleanup VLAN. - Attach port to bridge. - Detach port from bridge. Usage example: ># cd /sys/kernel/debug/tracing ># echo mlx5:mlx5_esw_bridge_fdb_entry_init >> set_event ># cat trace ... kworker/u20:1-96 [001] .... 231.892503: mlx5_esw_bridge_fdb_entry_init: net_device=enp8s0f0_0 addr=e4:fd:05:08:00:02 vid=3 flags=0 lastuse=4294895695 Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Bridge, support pvid and untagged vlan configurationsVlad Buslov1-0/+8
Implement support for pushing vlan header into untagged packet on ingress of port that has pvid configured and support for popping vlan on egress of port that has the matching vlan configured as untagged. To support such configurations packet reformat contexts of {INSERT|REMOVE}_HEADER types are created per such vlan and saved to struct mlx5_esw_bridge_vlan which allows all FDB entries on particular vlan to share single packet reformat instance. When initializing FDB entries with pvid or untagged vlan type set its mlx5_flow_act->pkt_reformat action accordingly. Flush all flows when removing vlan from port. This is necessary because even though software bridge removes all FDB entries before removing their vlan, mlx5 bridge implementation deletes their corresponding flow entries from hardware in asynchronous workqueue task, which will cause firmware error if vlan packet reformat context is deleted before all flows that point to it. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Bridge, match FDB entry vlan tagVlad Buslov1-0/+9
Add support for FDB vlan-tagged entries. Extend ingress and egress flow tables with flow groups to match packet vlan tag. Modify the flow creation code to include vlan tag, if vlan is configured on port and vlan configuration is supported for offload. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Bridge, handle FDB eventsVlad Buslov1-0/+15
Hardware supported by mlx5 driver doesn't provide learning and requires the driver to emulate all switch-like behavior in software. As such, all packets by default go through miss path, appear on representor and get to software bridge, if it is the upper device of the representor. This causes bridge to process packet in software, learn the MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all subscribers. In order to offload FDB entries in mlx5, register switchdev notifier callback and implement support for both 'added_by_user' and dynamic FDB entry SWITCHDEV_FDB_ADD_TO_DEVICE events asynchronously using new mlx5_esw_bridge_offloads->wq ordered workqueue. In workqueue callback offload the ingress rule (matching FDB entry MAC as packet source MAC) and egress table rule (matching FDB entry MAC as destination MAC). For ingress table rule also match source vport to ensure that only traffic coming from expected bridge port is matched by offloaded rule. Save all the relevant FDB entry data in struct mlx5_esw_bridge_fdb_entry instance and insert the instance in new mlx5_esw_bridge->fdb_list list (for traversing all entries by software ageing implementation in following patch) and in new mlx5_esw_bridge->fdb_ht hash table for fast retrieval. Notify the bridge that FDB entry has been offloaded by sending SWITCHDEV_FDB_OFFLOADED notification. Delete FDB entry on reception of SWITCHDEV_FDB_DEL_TO_DEVICE event. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-08net: ena: fix RST format in ENA documentation fileShay Agroskin1-86/+78
The documentation file used to be written in markdown format but was converted to reStructuredText (rst). The converted file doesn't keep up with rst format requirements which results in hard-to-read text. This patch fixes the formatting of the file. The patch also * Highlights and emphasizes some lines to improve readability * Rephrases some hard-to-understand text * Updates outdated function descriptions. * Removes TSO description which falsely claims the driver supports it Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08dt-bindings: net: dsa: sja1105: add SJA1110 bindingsVladimir Oltean1-0/+43
There are 4 variations of the SJA1110 switch which have a different set of MII protocols supported per port. Document the compatible strings. Also, the SJA1110 optionally supports 2 internal MDIO buses for 2 different types of Ethernet PHYs. Document a container node called "mdios" which has 2 subnodes "mdio@0" and "mdio@1", identifiable via compatible string, under which the driver finds the internal PHYs. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08dt-bindings: net: add dt binding for realtek rtl82xx phyJoakim Zhang1-0/+45
Add binding for realtek rtl82xx phy. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07dt-bindings: net: dsa: sja1105: convert to YAML schemaVladimir Oltean2-121/+89
Since the sja1105 driver no longer has any custom device tree properties, the conversion is trivial. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07net: dsa: sja1105: determine PHY/MAC role from PHY interface typeVladimir Oltean1-36/+1
Now that both RevMII as well as RevRMII exist, we can deprecate the sja1105,role-mac and sja1105,role-phy properties and simply let the user select that a port operates in MII PHY role by using phy-mode = "rev-mii"; or in RMII PHY role by using phy-mode = "rev-rmii"; There are no fixed-link MII or RMII properties in mainline device trees, and the setup itself is fairly uncommon, so there shouldn't be risks of breaking compatibility. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07net: phy: introduce PHY_INTERFACE_MODE_REVRMIIVladimir Oltean1-0/+1
The "reverse RMII" protocol name is a personal invention, derived from "reverse MII". Just like MII, RMII is an asymmetric protocol in that a PHY behaves differently than a MAC. In the case of RMII, for example: - the 50 MHz clock signals are either driven by the MAC or by an external oscillator (but never by the PHY). - the PHY can transmit extra in-band control symbols via RXD[1:0] which the MAC is supposed to understand, but a PHY isn't. The "reverse MII" protocol is not standardized either, except for this web document: https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/# In short, it means that the Ethernet controller speaks the 4-bit data parallel protocol from the perspective of a PHY (it acts like a PHY). This might mean that it implements clause 22 compatible registers, although that is optional - the important bit is that its pins can be connected to an MII MAC and it will 'just work'. In this discussion thread: https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/ we agreed that it would be an abuse of terms to use the "RevMII" name for anything than the 4-bit parallel MII protocol. But since all the same concepts can be applied to the 2-bit Reduced MII protocol as well, here we are introducing a "Reverse RMII" protocol. This means: "behave like an RMII PHY". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02Documentation: devlink rate objectsDmytro Linkin2-0/+61
Add devlink rate objects section at devlink port documentation. Add devlink rate support info at netdevsim devlink documentation. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02dt-bindings: net: brcm,iproc-mdio: convert to the json-schemaRafał Miłecki2-23/+38
This helps validating DTS files. Introduced changes: 1. Swapped #address-cells and #size-cells values 2. Renamed node: s/enet-gphy/ethernet-phy@/ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01docs: networking: Add documentation for MAPv5Sharath Chandra Vurukala1-12/+114
Adding documentation explaining the new MAPv4/v5 packet formats and the corresponding checksum offload headers. Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28mptcp: restrict values of 'enabled' sysctlMatthieu Baerts1-4/+4
To avoid confusions, it seems better to parse this sysctl parameter as a boolean. We use it as a boolean, no need to parse an integer and bring confusions if we see a value different from 0 and 1, especially with this parameter name: enabled. It seems fine to do this modification because the default value is 1 (enabled). Then the only other interesting value to set is 0 (disabled). All other values would not have changed the default behaviour. Suggested-by: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge tag 'linux-can-next-for-5.14-20210527' of ↵Jakub Kicinski4-187/+261
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== can-next 2021-05-27 The first 2 patches are by Geert Uytterhoeven and convert the rcan_can and rcan_canfd device tree bindings to yaml. The next 2 patches are by Oliver Hartkopp and me and update the CAN uapi headers. zuoqilin's patch removes an unnecessary variable from the CAN proc code. Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the error messages. Jiapeng Chong's patch removes two dead stores from the softing driver. The next 4 patches are by me and silence several warnings found by clang compiler. Jimmy Assarsson's patches for the kvaser_usb driver add support for the Kvaser hydra devices. Dario Binacchi provides 2 patches for the c_can driver, first removing an unused variable, then adding basic ethtool support to query driver and ring parameter info. The last 4 patches are by Torin Cooper-Bennun and clean up the m_can driver. * tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits) can: m_can: fix whitespace in a few comments can: m_can: make TXESC, RXESC config more explicit can: m_can: clean up CCCR reg defs, order by revs can: m_can: use bits.h macros for all regmasks can: c_can: add ethtool support can: c_can: remove unused variable struct c_can_priv::rxmasked can: kvaser_usb: Add new Kvaser hydra devices can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID can: at91_can: silence clang warning can: mcp251xfd: silence clang warning can: mcp251x: mcp251x_can_probe(): silence clang warning can: hi311x: hi3110_can_probe(): silence clang warning can: softing: Remove redundant variable ptr can: isotp: Add error message if txqueuelen is too small can: isotp: add symbolic error message to isotp_module_init() can: isotp: change error format from decimal to symbolic error names can: proc: remove unnecessary variables can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame can: uapi: update CAN-FD frame description dt-bindings: can: rcar_canfd: Convert to json-schema ... ==================== Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski43-228/+218
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27dt-bindings: can: rcar_canfd: Convert to json-schemaGeert Uytterhoeven2-107/+122
Convert the Renesas R-Car CAN FD Controller Device Tree binding documentation to json-schema. Document missing properties. The CANFD clock needs to be configured for the maximum frequency on R-Car V3M and V3H, too. Update the example to match reality. Link: https://lore.kernel.org/r/905134c87f72e2d8e37c309e0ce28ecd7d4f3992.1620323639.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-27dt-bindings: can: rcar_can: Convert to json-schemaGeert Uytterhoeven2-80/+139
Convert the Renesas R-Car CAN Controller Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Link: https://lore.kernel.org/r/561c35648e22a3c1e3b5477ae27fd1a50da7fe98.1620323639.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-26Merge tag 'net-5.13-rc4' of ↵Linus Torvalds2-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
2021-05-24Merge tag 'spi-fix-v5.13-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "There's some device specific fixes here but also an unusually large number of fixes for the core, including both fixes for breakage introduced on ACPI systems while fixing the long standing confusion about the polarity of GPIO chip selects specified through DT, and fixes for ordering issues on unregistration which have been exposed through the wider usage of devm_." * tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sc18is602: implement .max_{transfer,message}_size() for the controller spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer dt-bindings: spi: spi-mux: rename flash node spi: Don't have controller clean up spi device before driver unbind spi: Assume GPIO CS active high in ACPI case spi: sprd: Add missing MODULE_DEVICE_TABLE spi: Switch to signed types for *_native_cs SPI controller fields spi: take the SPI IO-mutex in the spi_set_cs_timing method spi: spi-fsl-dspi: Fix a resource leak in an error handling path spi: spi-zynq-qspi: Fix stack violation bug spi: spi-zynq-qspi: Fix kernel-doc warning spi: altera: Make SPI_ALTERA_CORE invisible spi: Fix spi device unregister flow
2021-05-23Merge tag 'powerpc-5.13-4' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or later with glibc >= 2.33). - Fix early_ioremap() on 64-bit, which broke booting on some machines. Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and Christophe Leroy. * tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls powerpc: Fix early setup to make early_ioremap() work
2021-05-21Merge tag 'devicetree-fixes-for-5.13-2' of ↵Linus Torvalds11-25/+13
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Another batch of removing unneeded type references in schemas - Fix some out of date filename references - Convert renesas,drif schema to use DT graph schema * tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: More removals of type references on common properties dt-bindings: media: renesas,drif: Use graph schema leds: Fix reference file name of documentation dt-bindings: phy: cadence-torrent: update reference file of docs
2021-05-20Merge tag 'arm-soc-fixes-5.13-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Only a small number of fixes so far, including some that I had applied during the merge window, so this is based on the original merge of the other branches. - The largest change is a fix for a reference counting bug in the AMD TEE driver. - Neil Armstrong now co-maintains Amlogic SoC support - Two build warning fixes for renesas device tree files - A sign expansion bug for optee - A DT binding fix for a mismerge" * tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: npcm: wpcm450: select interrupt controller driver MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer tee: amdtee: unload TA only when its refcount becomes 0 dt-bindings: nvmem: mediatek: remove duplicate mt8192 line firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle firmware: arm_scpi: Prevent the ternary sign expansion bug arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
2021-05-21powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference ↵Nicholas Piggin1-0/+10
between sc and scv syscalls The sc and scv 0 system calls have different ABI conventions, and ptracers need to know which system call type is being used if they want to look at the syscall registers. Document that pt_regs.trap can be used for this, and fix one in-tree user to work with scv 0 syscalls. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Cc: stable@vger.kernel.org # v5.9+ Reported-by: "Dmitry V. Levin" <ldv@altlinux.org> Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com
2021-05-19dt-bindings: net: dsa: add MT7530 interrupt controller bindingDENG Qingfang1-0/+6
Add device tree binding to support MT7530 interrupt controller. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19dt-bindings: net: renesas,ether: Update Sergei's email addressGeert Uytterhoeven1-1/+1
Update Sergei's email address, as per commit 534a8bf0ccdd7b3f ("MAINTAINERS: switch to my private email for Renesas Ethernet drivers"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19dt-bindings: net: nfc: s3fwrn5: Add optional clockStephan Gerhold1-0/+5
On some systems, S3FWRN5 depends on having an external clock enabled to function correctly. Allow declaring that clock in the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18ipv6: Add custom multipath hash policyIdo Schimmel1-0/+2
Add a new multipath hash policy where the packet fields used for hash calculation are determined by user space via the fib_multipath_hash_fields sysctl that was introduced in the previous patch. The current set of available packet fields includes both outer and inner fields, which requires two invocations of the flow dissector. Avoid unnecessary dissection of the outer or inner flows by skipping dissection if none of the outer or inner fields are required. In accordance with the existing policies, when an skb is not available, packet fields are extracted from the provided flow key. In which case, only outer fields are considered. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18ipv6: Add a sysctl to control multipath hash fieldsIdo Schimmel1-0/+27
A subsequent patch will add a new multipath hash policy where the packet fields used for multipath hash calculation are determined by user space. This patch adds a sysctl that allows user space to set these fields. The packet fields are represented using a bitmask and are common between IPv4 and IPv6 to allow user space to use the same numbering across both protocols. For example, to hash based on standard 5-tuple: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037 net.ipv6.fib_multipath_hash_fields = 0x0037 To avoid introducing holes in 'struct netns_sysctl_ipv6', move the 'bindv6only' field after the multipath hash fields. The kernel rejects unknown fields, for example: # sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000 sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18ipv4: Add custom multipath hash policyIdo Schimmel1-0/+2
Add a new multipath hash policy where the packet fields used for hash calculation are determined by user space via the fib_multipath_hash_fields sysctl that was introduced in the previous patch. The current set of available packet fields includes both outer and inner fields, which requires two invocations of the flow dissector. Avoid unnecessary dissection of the outer or inner flows by skipping dissection if none of the outer or inner fields are required. In accordance with the existing policies, when an skb is not available, packet fields are extracted from the provided flow key. In which case, only outer fields are considered. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18ipv4: Add a sysctl to control multipath hash fieldsIdo Schimmel1-0/+27
A subsequent patch will add a new multipath hash policy where the packet fields used for multipath hash calculation are determined by user space. This patch adds a sysctl that allows user space to set these fields. The packet fields are represented using a bitmask and are common between IPv4 and IPv6 to allow user space to use the same numbering across both protocols. For example, to hash based on standard 5-tuple: # sysctl -w net.ipv4.fib_multipath_hash_fields=0x0037 net.ipv4.fib_multipath_hash_fields = 0x0037 The kernel rejects unknown fields, for example: # sysctl -w net.ipv4.fib_multipath_hash_fields=0x1000 sysctl: setting key "net.ipv4.fib_multipath_hash_fields": Invalid argument More fields can be added in the future, if needed. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18Merge tag 'v5.13-rc2' into spi-5.13Mark Brown897-9993/+36963
Linux 5.13-rc2
2021-05-18dt-bindings: spi: spi-mux: rename flash nodeMichael Walle1-1/+1
The recent conversion of the common MTD properties to YAML now mandates a particular node name for SPI flash devices. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210517153946.9502-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-17dt-bindings: net: rockchip-dwmac: add rk3568 compatible stringEzequiel Garcia1-12/+18
Add compatible string for RK3568 gmac, and constrain it to be compatible with Synopsys dwmac 4.20a. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17dt-bindings: More removals of type references on common propertiesRob Herring7-8/+2
Users of common properties shouldn't have a type definition as the common schemas already have one. A few new ones slipped in and *-names was missed in the last clean-up pass. Drop all the unnecessary type references in the tree. A meta-schema update to catch these is pending. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Odelu Kukatla <okukatla@codeaurora.org> Cc: Alex Elder <elder@kernel.org> Cc: Shengjiu Wang <shengjiu.wang@nxp.com> Cc: linux-clk@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210510204524.617390-1-robh@kernel.org
2021-05-17dt-bindings: media: renesas,drif: Use graph schemaRob Herring1-13/+7
Convert the renesas,drif binding schema to use the graph schema. The binding referred to video-interfaces.txt, but it doesn't actually use any properties from it as 'sync-active' is a custom property. As 'sync-active' is custom, it needs a type definition. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> Cc: linux-media@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/20210510203514.603471-1-robh@kernel.org
2021-05-16Merge tag 'usb-5.13-rc2' of ↵Linus Torvalds2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.13-rc2. They consist of a number of resolutions for reported issues: - typec fixes for found problems - xhci fixes and quirk additions - dwc3 driver fixes - minor fixes found by Coverity - cdc-wdm fixes for reported problems All of these have been in linux-next for a few days with no reported issues" * tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) usb: core: hub: fix race condition about TRSMRCY of resume usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default xhci: Add reset resume quirk for AMD xhci controller. usb: xhci: Increase timeout for HC halt xhci: Do not use GFP_KERNEL in (potentially) atomic context xhci: Fix giving back cancelled URBs even if halted endpoint can't reset xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI usb: musb: Fix an error message usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4 usb: fotg210-hcd: Fix an error message docs: usb: function: Modify path name usb: dwc3: omap: improve extcon initialization usb: typec: ucsi: Put fwnode in any case during ->probe() usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP usb: dwc2: Remove obsolete MODULE_ constants from platform.c usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe() usb: dwc3: imx8mp: detect dwc3 core node via compatible string usb: dwc3: gadget: Return success always for kick transfer in ep queue ...
2021-05-16Merge tag 'x86_urgent_for_v5.13_rc2' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The three SEV commits are not really urgent material. But we figured since getting them in now will avoid a huge amount of conflicts between future SEV changes touching tip, the kvm and probably other trees, sending them to you now would be best. The idea is that the tip, kvm etc branches for 5.14 will all base ontop of -rc2 and thus everything will be peachy. What is more, those changes are purely mechanical and defines movement so they should be fine to go now (famous last words). Summary: - Enable -Wundef for the compressed kernel build stage - Reorganize SEV code to streamline and simplify future development" * tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/compressed: Enable -Wundef x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG x86/sev: Move GHCB MSR protocol and NAE definitions in a common header x86/sev-es: Rename sev-es.{ch} to sev.{ch}
2021-05-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-4/+5
Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: resource, squashfs, hfsplus, modprobe, and mm (hugetlb, slub, userfaultfd, ksm, pagealloc, kasan, pagemap, and ioremap)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/ioremap: fix iomap_max_page_shift docs: admin-guide: update description for kernel.modprobe sysctl hfsplus: prevent corruption in shrinking truncate mm/filemap: fix readahead return types kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled mm: fix struct page layout on 32-bit systems ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()" userfaultfd: release page in error path to avoid BUG_ON squashfs: fix divide error in calculate_skip() kernel/resource: fix return code check in __request_free_mem_region mm, slub: move slub_debug static key enabling outside slab_mutex mm/hugetlb: fix cow where page writtable in child mm/hugetlb: fix F_SEAL_FUTURE_WRITE
2021-05-15Merge tag 'erofs-for-5.13-rc2-fixes' of ↵Linus Torvalds1-73/+102
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "This mainly fixes 1 lcluster-sized pclusters for the big pcluster feature, which can be forcely generated by mkfs as a specific on-disk case for per-(sub)file compression strategies but missed to handle in runtime properly. Also, documentation updates are included to fix the broken illustration due to the ReST conversion by accident and complete the big pcluster introduction. Summary: - update documentation to fix the broken illustration due to ReST conversion by accident at that time and complete the big pcluster introduction - fix 1 lcluster-sized pclusters for the big pcluster feature" * tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix 1 lcluster-sized pcluster for big pcluster erofs: update documentation about data compression erofs: fix broken illustration in documentation
2021-05-15Merge tag 'libnvdimm-fixes-5.13-rc2' of ↵Linus Torvalds5-25/+25
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A regression fix for a bootup crash condition introduced in this merge window and some other minor fixups: - Fix regression in ACPI NFIT table handling leading to crashes and driver load failures. - Move the nvdimm mailing list - Miscellaneous minor fixups" * tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ACPI: NFIT: Fix support for variable 'SPA' structure size MAINTAINERS: Move nvdimm mailing list tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static libnvdimm: Remove duplicate struct declaration
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 22:49:44 +0000