Age | Commit message (Collapse) | Author | Files | Lines |
|
On distros whose texlive packaging is fine-grained, texlive-xecjk
can be installed/removed independently of other texlive packages.
Conditionally loading xeCJK depending only on the existence of the
"Noto Sans CJK SC" font might end up in xelatex error of
"xeCJK.sty not found!".
Improve the situation by testing existence of xeCJK.sty before
loading it.
This is useful on RHEL 9 and its clone distros where texlive-xecjk
doesn't work at the moment due to a missing dependency [1].
"make pdfdocs" for non-CJK contents should work after removing
texlive-xecjk.
Link: [1] https://bugzilla.redhat.com/show_bug.cgi?id=2086254
Fixes: 398f7abdcb7e ("docs: pdfdocs: Pull LaTeX preamble part out of conf.py")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/c24c2a87-70b2-5342-bcc9-de467940466e@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The automarkup code tries to look up symbols once as a function, and once
as a macro. The Sphinx C domain code, though, totally ignores that
distinction and will return the same results either way. So just look
things up once and be done with it; the resulting output does not change,
but htmldocs build time drops by about 5%.
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220630163630.714673-3-corbet@lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The automarkup code tries to create a lot of cross-references that don't
exist. Cross-reference lookups are expensive, especially in later versions
of Sphinx, so there is value in avoiding unnecessary ones. Remember
attempts that failed and do not retry them.
This improves the htmldocs build time by 5-10% depending on the phase of
the moon and other factors.
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220630163630.714673-2-corbet@lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It turns out that networking.pdf has exceeded 100 chapters and
titles of chapters >= 100 collide with their counts in its table
of contents (TOC).
Increase relevant params by 0.6em in the preamble to avoid such
ugly collisions.
While at it, fix a typo in comment (subsection).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bdb60ba3-7813-47d0-74f9-7c31dd912d95@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
jinja2 release 3.1.0 (March 24, 2022) broke Sphinx<4.0.
This looks like the result of deprecating Python 3.6.
It has been tested against Sphinx 4.3.0 and later.
Setting an upper limit of <3.1 to junja2 can unbreak Sphinx<4.0
including Sphinx 2.4.4.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/7dbff8a0-f4ff-34a0-71c7-1987baf471f9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In order to make it more standard and ReST compatible,
change the meta-tag used with --enable-lineno from:
#define LINENO
to
.. LINENO
In practice, no functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/40725032b5a4a33db740bf1de397523af958ff8a.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In order to make it more standard and ReST compatible,
change the meta-tag used with --enable-lineno from:
#define LINENO
to
.. LINENO
In practice, no functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/125ffd31fbc77ad9eee4d6906e1830b8162fa6ca.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The files included by kernel-include should be added as build
dependencies, in order for sphinx-build to rebuild the corresponding
docs if any changes at the included file happens.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/d30fc4fa422a13b7e1623d690945c46b58a55e79.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Ensure that Sphinx-build will handle the files parsed by
get_abi.pl as dependencies. This way, if they are touched,
the ABI output will be regenerated.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/10bc3d3bc74f514a539cd3b48b9d287d2b6f99e2.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Ensure that the feature files will be regenerated if any
changes happen at the Documentation/features files that were
processed by gen_feat.pl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/5cdf7a8300019129dcc09d4c2557f75908754445.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
SVG -> PDF conversion is not required in "make htmldocs".
It is pointless to always warn of a missing converter.
Demote the log message in setupTools() to verbose.
For "make pdfdocs" (or "make latexdocs"), promote the dynamic
message of "include SVG raw" to a warn.
Expand the message and recommend installing Inkscape or
ImageMagick.
Fixes: 8ccd05697a9d ("docs: sphinx/kfigure.py: Use inkscape(1) for SVG -> PDF conversion")
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-doc@vger.kernel.org
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/c80e1481-10d4-7151-fe59-e846259eb0d4@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Use past tense as the fonts can be installed after the fact.
Add suggestion to install "Noto Sans CJK" and "Noto Serif CJK"
font families. ("Noto Serif CJK" is optional.)
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/dfefa601-c58d-c86c-953f-5e4454db9409@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Expand comments in LaTeX code and mention some of important points
told in changelogs of conf.py changes.
Hopefully they can help future contributors in this area.
No code change involved.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/bce9261b-1950-3146-07b2-07bd2ec79158@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Quote from Jon's remark [1]:
I do notice that Documentation/conf.py is getting large and
unapproachable. At some future point, it might be nice to pull
all of the latex stuff out into a separate file where it won't
scare people who stumble into it by accident.
Pull LaTeX preamble settings added since commit 3b4c963243b1 ("docs:
conf.py: adjust the LaTeX document output") out into
sphinx/kerneldoc-preamble.sty.
It will be copied to the build directory by the added
"latex_additional_files" setting in conf.py.
As a bonus, LaTeX/TeX code can be maintained without escaping backslashes.
To compensate the loss of change history in sphinx/kerneldoc-preamble.sty,
here is a list of changes made in conf.py:
- f7ebe6b76940 ("docs: Activate exCJK only in CJK chapters")
- 0afd4df0d16a ("docs: pdfdocs: Prevent column squeezing by tabulary")
- 659653c9e546 ("docs: pdfdocs: Refactor config for CJK document")
- e291ff6f5a03 ("docs: pdfdocs: Add CJK-language-specific font settings")
- 7eb368cc319b ("docs: pdfdocs: Choose Serif font as CJK mainfont if possible")
- 35382965bdd2 ("docs: pdfdocs: Preserve inter-phrase space in Korean translations")
- 77abc2c230b1 ("docs: pdfdocs: One-half spacing for CJK translations")
- 788d28a25799 ("docs: pdfdocs: Permit AutoFakeSlant for CJK fonts")
- 29ac9822358f ("docs: pdfdocs: Teach xeCJK about character classes of quotation marks")
- 7c5c18bdb656 ("docs: pdfdocs: Fix typo in CJK-language specific font settings")
- aa872e0647dc ("docs: pdfdocs: Adjust \headheight for fancyhdr")
- 8716ef413aa5 ("docs: pdfdocs: Tweak width params of TOC")
- 66939df53948 ("docs: pdfdocs: Switch default CJK font to KR variants")
- 7b686a2ea1e4 ("docs: pdfdocs: Enable CJKspace in TOC for Korean titles")
- 5d9158e3c762 ("docs/translations: Skip CJK contents if suitable fonts not found")
- b774cc46313b ("docs: pdfdocs: Move CJK monospace font setting to main conf.py")
[1]: https://lore.kernel.org/all/87zgmr66cn.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/aaa9dca1-27c0-c414-77f3-c5587db0cc5b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Depending on its version, distro config, and system-setup type,
inkscape(1) emits various warning messages which are harmless in
command-line uses.
List of such warning messages (incomplete, long ones wrapped):
- Gtk-Message: hh:mm:ss.nnn: Failed to load module "canberra-gtk-module"
- Unable to init server: Could not connect: Connection refused
- Failed to get connection
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_new_for_name:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_call:
assertion 'DBUS_IS_G_PROXY (proxy)' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_connection_register_g_object:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): WARNING **: hh:mm:ss.nnn:
Fonts dir '/usr/share/inkscape/fonts' does not exist and will be ignored.
To avoid unnecessary anxiety, capture the message and output it via
kernellog.verbose or kernellog.warn depending on the exit code.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/e26a7b53-9155-8394-4a31-6006379b65a5@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Using convert(1) of ImageMagick for SVG -> PDF conversion results in
PDFs containing raster (bitmap) images which sometimes look blurry.
Ideally speaking, SVG to PDF conversion should retain vector graphics
in SVG.
rsvg-convert(1) can do such conversions with regard to SVG files
generated by dot(1).
Unfortunately, rsvg-convert(1) does not cover some of SVG features
specific to Inkscape.
inkscape(1) of Inkscape naturally covers such SVG features.
So add a route in svg2pdf() so that inkscape(1) is used when it is
available.
Note:
After this change, if you have Inkscape installed, ImageMagick nor
librsvg are not required.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/3eea2a8d-c52d-ee07-cf7b-83784c6f6e4b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
To prevent any regression on existing build systems, limit the
fallback of converting DOT -> raster PDF only when both of the
following conditions are met.
o dot(1) doesn't support -Tpdf
o rsvg-convert(1) is not found
While we are here, add kernellog.verbose messages related to
rsvg-convert, 'dot -Tpdf', and 'dot -Tsvg' commands.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e76f61e1-7366-ba00-b119-8ea6a2499861@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
On openSUSE, dot(1) command does not support direct PDF output.
On other distros, generated PDF images have unnecessarily wide margins,
especially for small graphs.
By using dot(1) for DOT -> SVG, then rsvg-convert(1) for SVG -> PDF,
more optimal PDF images can be obtained, with the bonus of improved
portability across various distros.
Add rules in kfigure.py so that the above mentioned route is taken
when rsvg-convert(1) is available.
Note that rsvg-convert(1) is recommended by sphinx_pre_install.
So it is most likely that existing systems for building pdfdocs have
rsvg-convert(1) installed.
Note:
SVG features supported by rsvg-convert(1) vary depending on its
version and distro config.
For example, the one found on Ubuntu Bionic (version 2.40.20) does
poor job in rendering some of SVG files drawn by Inkscape.
SVG files generated by dot(1) are converted nicely even with such
old versions of rsvg-convert.
So this change does not affect the quality of such figures in any
way.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/15b56dd3-081a-2469-c3a4-dfc1ca4c6c2d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Since commit d18b01789ae5 ("docs: Add automatic cross-reference for
documentation pages"), references that were already explicitly defined
with "ref:" and referred to other pages with a path have been doubled.
This is reported as the following error by Firefox:
Start tag "a" seen but an element of the same type was already open.
End tag "a" violates nesting rules.
As well as the invalid HTML, this also obscures the URI fragment links
to subsections because the second link overrides the first. For example
on the page admin-guide/hw-vuln/mds.html the last link should be to the
"Default Mitigations" subsection using a # URI fragment:
admin-guide/hw-vuln/l1tf.html#default-mitigations
But it is obsured by a second link to the whole page:
admin-guide/hw-vuln/l1tf.html
The full HTML with the double <a> tags looks like this:
<a class="reference internal" href="l1tf.html#default-mitigations">
<span class="std std-ref">
<a class="reference internal" href="l1tf.html">
<span class="doc">L1TF - L1 Terminal Fault</span>
</a>
</span>
</a>
After this commit, there is only a single link:
<a class="reference internal" href="l1tf.html#default-mitigations">
<span class="std std-ref">Documentation/admin-guide/hw-vuln//l1tf.rst</span>
</a>
Now that the second link is removed, the browser correctly jumps to the
default-mitigations subsection when clicking the link.
The fix is to check that nodes in the document to be modified are not
already references. A reference is counted as any text that is a
descendant of a reference type node. Only plain text should be converted
to new references, otherwise the doubling occurs.
Testing
=======
* Test that the build stdout is the same (ignoring ordering), and that
no new warnings are printed.
* Diff all .html files and check that the only modifications occur
to the bad double links.
* The auto linking of bare references to pages without "ref:" is still
working.
Fixes: d18b01789ae5 ("docs: Add automatic cross-reference for documentation pages")
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220105143640.330602-2-james.clark@arm.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Use "its" for possessive form instead of the contraction "it's".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20211222062354.23224-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
sphinx_rtd_theme 0.5.2 has "docutils<0.17" in its requirements.
docutils 0.17 released this April caused regression in
sphinx_rtd_theme 0.5.1 [1].
By removing docutils and moving sphinx_rtd_theme before Sphinx in
requirements.txt, the requirement of "docutils<0.17" can be met
naturally.
[1]: https://github.com/readthedocs/sphinx_rtd_theme/issues/1112
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/75f14c88-6091-1072-41cb-16b886aee5a0@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
s/automaticly/automatically/
s/buidler/builder/
..and a sentence construction fix.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210301201052.11067-1-unixbhaskar@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Previously, a cross-reference to another document could only be created
by writing the full path to the document starting from the
Documentation/ directory.
Extend this to also allow relative paths to be used. A relative path
would be just the path, like ../filename.rst, while the absolute path
still needs to start from Documentation, like Documentation/filename.rst.
As part of this change, the .rst extension is now required for both
types of paths, since not requiring it would cause the regex to be too
generic.
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20210128010028.58541-2-nfraprado@protonmail.com
[jc: Tweaked the regex to recognize .txt too]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The kernel build system as a whole is dropping support for Python 2, so we
should do the same. The effects are rather small, especially considering
that much of the deleted code was not doing anything under any version of
Python anyway.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As promised, drop support for some ancient sphinx releases, along with a
lot of the cruft that was required to make that support work.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
|
|
On the update of Sphinx version to 2.4.4, the "six" library won't be
installed automatically. (which is required by kfigure.py)
Main reason of this issue were occurred by the requirements changed from
the sphinx library. In Sphinx v1.7.9, six was listed on the
install_requires, but it has been removed since 2.x
The kfigure.py uses six library explicitly, adding six to
requirements.txt seems reasonable
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20201208014628.GA1361@JSYoo5B-Base.localdomain
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The feature files have a special well-defined format. Add
a script that parses them, allowing to search for a feature
and/or by an architecture and to produce ReST-compatible
outputs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/bb2e51e5aa883e2583a4a6280f1c1b391bd8ef4c.1606748711.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx 3.1 introduced namespaces for C cross-references. With this,
each C domain type/function declaration is put inside the namespace that
was active at the time of its declaration.
Add support for automatic cross-referencing inside C namespaces by
checking whether the corresponding source file had a C namespace Sphinx
directive, and if so, try cross-referencing inside of it before going to
the global scope.
This assumes there's only one namespace (if any) per rst file.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20201117021107.214704-1-nfraprado@protonmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull documentation fixes from Jonathan Corbet:
"A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds"
* tag 'docs-5.10-3' of git://git.lwn.net/linux:
docs: fix automarkup regression on Python 2
documentation: arm: sunxi: add Allwinner H6 documents
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
docs: Makefile: honor V=0 for docs building
|
|
It turns out that the Python 2 re module lacks the ASCII flag, so don't try
to use it there.
Fixes: f66e47f98c1e ("docs: automarkup.py: Fix regexes to solve sphinx 3 warnings")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now that the stable ABI files are compatible with ReST,
parse them without converting complex descriptions as literal
blocks nor escaping special characters.
Please notice that escaping special characters will probably
be needed at descriptions, at least for the asterisk character.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/59ccbaa75ff05f23e701dd9a0bbe118e9343a553.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Sphinx docutils parser is lazy: if the content is bigger than
a certain number of lines, it silenlty stops parsing it,
producing an incomplete content. This seems to be worse on newer
Sphinx versions, like 2.0.
So, change the logic to parse the contents per input file.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4659b60795739308e34d2d00c57ee0742a9cd2ab.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just like kernel-doc extension, we need to be able to identify
what part of an imported document has issues, as reporting them
as:
get_abi.pl rest --dir $srctree/Documentation/ABI/obsolete --rst-source:1689: ERROR: Unexpected indentation.
Makes a lot harder for someone to fix.
It should be noticed that it the line which will be reported is
the line where the "What:" definition is, and not the line
with actually has an error.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d6155ab16fb7631f2fa8e7a770eae72f24bf7cc5.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same way kerneldoc.py needed changes to work with newer
Sphinx, this script needs the same changes.
While here, reorganize the include order to match kerneldoc.py.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f2b25caef5db7738629773a03463908d3b39b83a.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parser breaks with UTF-8 characters with Sphinx 1.4.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9e7c8e3b0efaa1ae0536da6493ab438bd3f9fe58.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ABI documentation is special: it is not plain text files,
but, instead, files with an strict format, as specified by
Documentation/ABI/README.
Add a parser for it.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/48abf1a410237e63f85354a8cd7027fdf25657bf.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An extension may want to just inform about something. So, add
support for it.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0ddebd8677605d789d53433c8a5344c68da82a73.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The :c:type:`foo` only works properly with structs before
Sphinx 3.x.
On Sphinx 3.x, structs should now be declared using the
.. c:struct, and referenced via :c:struct tag.
As we now have the automarkup.py macro, that automatically
convert:
struct foo
into cross-references, let's get rid of that, solving
several warnings when building docs with Sphinx 3.x.
Reviewed-by: André Almeida <andrealmeid@collabora.com> # blk-mq.rst
Reviewed-by: Takashi Iwai <tiwai@suse.de> # sound
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Sphinx 3 added support for declaring C macros with parameters using the
:c:macro role.
To support automarkup for both functions and parametrized macros using
the same regex (words ending in ()), try to cross-reference to both, and
only fall back to regular text if neither exist.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
With the transition to Sphinx 3, new warnings were caused by
automarkup, exposing bugs in the name matching.
When automarkup parsed a text like "struct struct" in the documentation,
it tried to cross-reference to a "struct" symbol, which is recognized as
a C reserved word by Sphinx 3, generating a warning.
Add some C reserved words (only the ones that were causing warnings) to
a list and skip them while trying to cross-reference.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
With the transition to Sphinx 3, new warnings were generated by
automarkup, exposing bugs in the regexes.
The warnings were caused by the expressions matching words in the
translated versions of the documentation, since any unicode character
was matched.
Fix the regular expression by making the C regexes use ASCII and
ensuring the expressions only match the beginning of words,
in order to avoid warnings like this:
WARNING: Unparseable C cross-reference: '调用debugfs_rename'
That's probably due to the lack of using spaces between words
on Chinese.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
While Sphinx 2 used a single c:type role for struct, union, enum and
typedef, Sphinx 3 uses a specific role for each one.
To keep backward compatibility, detect the Sphinx version and use the
correct roles for that version.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently, there's no way to exclude identifiers from
a kernel-doc markup. Add support for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Finding where an error like this was generated:
../lib/math/div64.c:73: WARNING: Duplicate C declaration, also defined in 'kernel-api'.
Can take some time, as there's no glue about what kernel-doc
tag generated it. It is a way better to display it as:
.../Documentation/core-api/kernel-api:171: ../lib/math/div64.c:73: WARNING: Duplicate C declaration, also defined in 'kernel-api'.
Declaration is 'div_s64_rem'.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
While most of the C domain parsing is done via kernel-doc,
some RST files use C domain tags directly.
While several of them can be removed for Sphinx < 3.0, due
to automarkup.py, and several others that could be
converted into kernel-doc markups, changes like that are
time-consuming, and may not fit all cases.
As we already have the cdomain.py for handing backward
compatibility with Sphinx versions below 3.0, let's
make it more complete, in order to cover any usage of the
newer tags outside kernel-doc.
This way, it should be feasible to use the new tags inside
the Kernel tree, without losing backward compatibility.
This should allow fixing the remaining warnings with
the Kernel tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since Sphinx 3.0, the C domain code was rewritten, but only
after version 3.1 it got support for setting namespaces on
C domains, with is something that it is required, in order to
document system calls, like ioctl() and others.
As part of changing the documentation subsystem to properly
build with Sphinx 3.1+, add support for such new tag:
.. c:namespace::"
Such tag optionally replaces the optional "name" tag for functions,
setting a single namespace domain for all C references found
at the file.
With that, it should be possible to convert existing
documentation to be compatible with both Sphinx 1.x/2.x and
3.1+.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When kernel-doc is called via kerneldoc.py, there's no need to
auto-detect the Sphinx version, as the Sphinx module already
knows it. So, add an optional parameter to allow changing the
Sphinx dialect.
As kernel-doc can also be manually called, keep the auto-detection
logic if the parameter was not specified. On such case, emit
a warning if sphinx-build can't be found at PATH.
I ended using a suggestion from Joe for using a more readable
regex, instead of using a complex one with a hidden group like:
m/^(\d+)\.(\d+)(?:\.?(\d+)?)/
in order to get the optional <patch> argument.
Thanks-to: Joe Perches <joe@perches.com>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Cross-referencing to other documentation pages is possible using the
:doc:`doc-file` directive from Sphinx.
Add automatic markup for references to other documentation pages in the
format Documentation/subfolder/doc-file.rst (the extension being
optional).
This requires that the path be passed all the way from the Documentation
folder, which can be longer than passing a relative path through the
:doc: directive, but avoids the markup, making the text cleaner when
read in plain text.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20200911133339.327721-3-nfraprado@protonmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|