summaryrefslogtreecommitdiffstats
path: root/Documentation/media
AgeCommit message (Collapse)AuthorFilesLines
2016-12-15Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab48-3153/+6152
* patchwork: (496 commits) [media] v4l: tvp5150: Add missing break in set control handler [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER [media] em28xx: don't store usb_device at struct em28xx [media] em28xx: use usb_interface for dev_foo() calls [media] em28xx: don't change the device's name [media] mn88472: fix chip id check on probe [media] mn88473: fix chip id check on probe [media] lirc: fix error paths in lirc_cdev_add() [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs [media] s5p-mfc: Rework clock handling [media] s5p-mfc: Don't keep clock prepared all the time [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code [media] s5p-mfc: Remove dead conditional code [media] s5p-mfc: Ensure that clock is disabled before turning power off [media] s5p-mfc: Remove special clock rate management [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES [media] vivid: Set color_enc on HSV formats [media] v4l2-tpg: Init hv_enc field with a valid value ...
2016-12-01Doc: Correct typo, "Introdution" => "Introduction"Sanjeev2-4/+4
This corrects a set of spelling mistakes, probably from an automated conversion. Signed-off-by: Sanjeev Gupta <ghane0@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: fix media cleandocs targetMauro Carvalho Chehab1-1/+1
The builddir prefix was missing on make cleandocs. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: media/Makefile: reorganize the rulesMauro Carvalho Chehab1-21/+24
Better organize the media/Makefile, in order to better split what's related to image conversion from the ones related to parse-headers.pl. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: media: build SVG from graphviz filesMauro Carvalho Chehab3-74/+16
Instead of keeping both SVG and graphviz files, dynamically build SVG from its graphviz sources. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: replace bayer.png by a SVG imageMauro Carvalho Chehab4-2/+987
SVG images are scalable, with makes easier to output on different formats. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: replace the selection.png by a SVG imageMauro Carvalho Chehab4-2/+5815
bitmap images don't scale too well. So, replace it by a SVG image, written in inkscape. I'm using the 2009's temporary logo.svg image from 8032b526d1a3 ("linux.conf.au 2009: Tuz"), with a Tasmanian Devil wearing a tux mask. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: convert pipeline to SVG formatMauro Carvalho Chehab5-2/+83
The pipeline image was produced from some dot file that has long missed. Create a pipeline.dot with the graph and convert it to SVG. As we're planning to add future support for graphviz graphics, also store the .dot file on the tree, as this will make easier when we add such Sphinx extension. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: nv12mt zigzag images: replace by SVG imagesMauro Carvalho Chehab6-4/+2045
Instead of using bitmap images to show the zigzag macroblock parsing, replace it by a SVG ones, with is scalable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30svg files: cleanup themMauro Carvalho Chehab9-4759/+6712
Use sans-serif font on all documents, split text lines, ungroup elements, and do other misc cleanups, in order to make all of them to look better, and to have smaller columns inside their lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30convert more media images to SVGMauro Carvalho Chehab16-12/+6849
Using vectorial graphics provide a better visual. As those images are originally using a vectorial graphics input at the pdf files, use them, from an old media tree repository, converting them to SVG. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-29[media] cec: pass parent device in register(), not allocate()Hans Verkuil1-8/+6
The cec_allocate_adapter function doesn't need the parent device, only the cec_register_adapter function needs it. Drop the cec_devnode parent field, since devnode.dev.parent can be used instead. This change makes the framework consistent with other frameworks where the parent device is not used until the device is registered. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23[media] doc-rst: Specify raw bayer format variant used in the examplesSakari Ailus4-4/+4
The documentation simply mentioned that one of the four pixel orders was used in the example. Now specify the exact pixelformat instead. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23[media] v4l: Add 16-bit raw bayer pixel formatsSakari Ailus2-10/+17
The formats added by this patch are: V4L2_PIX_FMT_SBGGR16 V4L2_PIX_FMT_SGBRG16 V4L2_PIX_FMT_SGRBG16 V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the documentation to match that of the other sample depths. Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other similar formats. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23[media] extended-controls.rst: fix typoAndrea Gelmini1-1/+1
Fix a typo on a word inside it. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18[media] doc-rst: v4l: Add documentation on CSI-2 bus configurationSakari Ailus2-0/+62
Document the interface between the CSI-2 transmitter and receiver drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-17[media] docs-rst: cleanup SVG filesMauro Carvalho Chehab4-309/+4471
The SVG files are larger than the draw dimentions, have long lines and aren't cleaned. Use inkscape to automatically fix those issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-17[media] dtv-core: get rid of duplicated kernel-doc includeMauro Carvalho Chehab1-8/+0
Somehow, two DVB headers were included twice. Remove the duplication Reported-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16docs: Avoid warning on cleandocsJonathan Corbet1-2/+2
Recent Makefile changes added an rm command without the requisite "-f", leading to warnings if the files do not exist. Make it be quiet again. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16docs-rst: auto-generate PDF image filesMauro Carvalho Chehab41-32/+58
The PDF files that contain media images were actually generated offline from their SVG or PNG source files. Sphinx can handle PNG sources automatially. So, let's just drop their PDF counterparts. For SVG, however, Sphinx doesn't produce the right tags to use the TexLive SVG support. Also, the SVG support is done via shell execution, with is not nice. So, while we don't have any support for SVG inside Sphinx core or as an extension, move the logic to build them to Makefile, producing the PDF images on runtime. NOTE: due to the way Sphinx works, the PDF images should be generated inside the Kernel source tree, as otherwise Sphinx won't find it, not obeying what's specified by "O=" makefile parameter. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16docs-rst: convert gif files to pngMauro Carvalho Chehab12-0/+0
Right now, media is using two different formats for bitmap images: GIF and PNG. Let's use just one, to make it simpler when building with Sphinx. As PNG is usually better than GIF, let's use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16convert some images from png to svgMauro Carvalho Chehab6-2/+999
SVG images are nicer, as they can easily be scaled. Also, they're written in text, with makes easier to work. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16subdev-formats.rst: add missing columns to tabularcolumnsMauro Carvalho Chehab1-1/+1
There are several missing columns on the size specification, causing LaTeX to complain on interactive mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16subdev-formats.rst: don't use adjustbox on a longtableMauro Carvalho Chehab1-2/+9
adjustbox doesn't work on longtables. Also, this causes an error on LaTeX in interactive mode. So, use, instead, a tiny font. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16docs-rst: fix LaTeX \DURole renewcommand with Sphinx 1.3+Mauro Carvalho Chehab1-5/+0
PDF build on Kernel 4.9-rc? returns an error with Sphinx 1.3.x and Sphinx 1.4.x, when trying to solve some cross-references. The solution is to redefine the \DURole macro. However, this is redefined too late. Move such redefinition to LaTeX preamble and bind it to just the Sphinx versions where the error is known to be present. Tested by building the documentation on interactive mode: make PDFLATEX=xelatex -C Documentation/output/./latex Fixes: e61a39baf74d ("[media] index.rst: Fix LaTeX error in interactive mode on Sphinx 1.4.x") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-16[media] v4l: Add Renesas R-Car FDP1 DriverKieran Bingham2-0/+38
The FDP1 driver performs advanced de-interlacing on a memory 2 memory based video stream, and supports conversion from YCbCr/YUV to RGB pixel formats Signed-off-by: Kieran Bingham <kieran+renesas@bingham.xyz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: ctrls: Add deinterlacing mode controlLaurent Pinchart2-0/+6
The menu control selects the operation mode of a video deinterlacer. The menu entries are driver specific. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran@bingham.xyz> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec-ioc-adap-g-log-addrs.rst: describe CEC_LOG_ADDRS_FL_CDC_ONLYMauro Carvalho Chehab1-0/+9
The CEC_LOG_ADDRS_FL_CDC_ONLY flag is missing at the documentation, causing this warning: Documentation/output/cec.h.rst:6: WARNING: undefined label: cec-log-addrs-fl-cdc-only (if the link has no caption the label must precede a section header) Add a documentation for it, based on the commit that introduced the flag. Fixes: a69a168a1bd4 ("[media] cec: add proper support for CDC-Only CEC devices") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: move the CEC framework out of staging and to mediaHans Verkuil1-1/+1
The last open issues have been addressed, so it is time to move this out of staging and into the mainline and to move the public cec headers to include/uapi/linux. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: accept two replies for CEC_MSG_INITIATE_ARCHans Verkuil1-0/+8
The CEC_MSG_INITIATE_ARC message is special since it is the ONLY CEC message that accepts two possible valid replies: CEC_MSG_REPORT_ARC_INITIATED and CEC_MSG_REPORT_ARC_TERMINATED. So if the transmitted message is CEC_MSG_INITIATE_ARC and the remote side replied with CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED, then a msg->reply value of CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED will match either reply. I thought about either adding a second reply2 field, but that's ugly for all other messages that have only one reply, and what if in the future a new message is added that can have three replies? Another option would be to add a cec_msg flag, but really, the combination of CEC_MSG_REPORT_ARC_INITIATED and a reply value of one of the two possible replies already functions as a flag. Another advantage of this approach is that it is safe to re-use a cec_msg struct. No need to zero a flags field or a reply2 field. So since this really is an exception in the CEC specification, I decided to implement it as an exception as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: add CEC_MSG_FL_REPLY_TO_FOLLOWERSHans Verkuil1-1/+21
Give the caller more control over how replies to a transmit are handled. By default the reply will only go to the filehandle that called CEC_TRANSMIT. If this new flag is set, then the reply will also go to all followers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: add flag to cec_log_addrs to enable RC passthroughHans Verkuil1-0/+10
By default the CEC_MSG_USER_CONTROL_PRESSED/RELEASED messages are passed on to the follower(s) only. If the new CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set in the flags field of struct cec_log_addrs then these messages are also passed on to the remote control input subsystem and they will appear as keystrokes. This used to be the default behavior, but now you have to explicitly enable it. This is done to force the caller to think about possible security issues (e.g. if these messages are used to enter passwords). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec rst: convert tables and drop the 'row' commentsHans Verkuil5-945/+579
This uses Laurent's python script to convert all tables, dropping the useless 'row' comments. See commit c2b66cafdf02 ("[media] v4l: doc: Remove row numbers from tables") for the script that was used. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] control.rst: improve the queryctrl code examplesHans Verkuil1-33/+55
The code examples on how to enumerate controls were really long in the tooth. Update them. Using FLAG_NEXT_CTRL is preferred these days, so give that example first. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec-core.rst: improve documentationHans Verkuil1-6/+18
Improve the internal CEC documentation. In particular add a section that specifies that transmit-related interrupts should be processed before receive interrupts. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] vidioc-g-dv-timings.rst: document the new dv_timings flagsHans Verkuil2-0/+14
Document the new flags. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: Document that m2m devices have a file handle specific contextSakari Ailus1-1/+1
Memory-to-memory V4L2 devices all have file handle specific context. Say this in the API documentation so that the user space may rely on it being the case. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: doc: Fix typo in vidioc-g-tuner.rstMasanari Iida1-2/+2
This patch fix spelling typos found in vidioc-g-tuner.rst Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab2-4/+4
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24[media] cardlist: convert them to asciiart tablesMauro Carvalho Chehab11-855/+885
Instead of using codeblock for the cardlists, use tables, in order to improve their visual when presenting them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24[media] gspca-cardlist.rst: update camera namesMauro Carvalho Chehab1-25/+25
For those cameras that were missing descriptions, update using some web research: https://cateee.net/lkddb/web-lkddb/USB_GSPCA_STV0680.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_ZC3XX.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_KINECT.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SPCA561.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_VICAM.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_DTCS033.html https://bugs.launchpad.net/ubuntu/+source/linux/+bug/564979 https://cateee.net/lkddb/web-lkddb/USB_GSPCA_PAC7302.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXB.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXJ.html Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24[media] gspca-cardlist.rst: update cardlist from drivers USB IDsMauro Carvalho Chehab1-3/+41
There are several missing USB IDs that are defined on gspca drivers. Add them. The missing entries were found/created using the following script: <script> use strict; use File::Find; my $src = "drivers/media/usb/gspca/"; my $table = 0; my %data; my $id; my $len = 0; open IN, "Documentation/media/v4l-drivers/gspca-cardlist.rst"; while (<IN>) { if (m/^=+\s+=+\s+=+$/) { $table++; next; } next if ($table != 2); if (m/^(\S+)\s+(\S+)\s+(.*)/) { $id = "$1_$2"; $data{$id}->{driver} = $1; $data{$id}->{usb_id} = $2; $data{$id}->{name} = $3; $data{$id}->{valid} = 0; $len = length($3) if (length($3) > $len); } } close IN; sub parse_dir { my $file = $File::Find::name; open IN, $file; my $driver = $file; $driver =~ s,($src),,; $driver =~ s,/.*,,; $driver =~ s,\.c$,,; while (<IN>) { next if (m,/\*.*USB_DEVICE,); if (m/USB_DEVICE[^\(]*\(\s*0x(\S+)\s*\,\s*0x(\S+)\)(.*)/) { my $n = "$1:$2"; my $o = $3; $id = "${driver}_$n"; $data{$id}->{valid} = 1; next if (defined $data{$id}->{driver}); $data{$id}->{driver} = $driver; $data{$id}->{usb_id} = $n; if ($o =~ m,\/\*\s*(.*)\*\/,) { $n = $1; $n =~ s/\s+//; $data{$id}->{name} = $n; } else { $data{$id}->{name} = ""; } } } close IN; } find({wanted => \&parse_dir, no_chdir => 1}, $src); print "The gspca cards list\n"; print "====================\n\n"; print "The modules for the gspca webcam drivers are:\n\n"; print "- gspca_main: main driver\n"; print "- gspca\\_\\ *driver*: subdriver module with *driver* as follows\n\n"; print "========= ========= " . "=" x $len . "\n"; print "*driver* vend:prod Device\n"; print "========= ========= " . "=" x $len . "\n"; foreach my $id (sort { $data{$a}->{usb_id} . $data{$a}->{driver} cmp $data{$b}->{usb_id} . $data{$b}->{driver} } keys %data) { next if (!$data{$id}->{valid}); my $s = sprintf "%-15s %s\t%s\n", $data{$id}->{driver}, $data{$id}->{usb_id}, $data{$id}->{name}; # Replace tabs by spaces $s =~ s/[ \t]+$//; $s =~ s<^ {8}> <\t>; $s =~ s<^ {1,7}\t> <\t>; $s =~ s< {1,7}\t> <\t>; printf $s; } print "========= ========= " . "=" x $len . "\n"; </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24[media] gspca-cardlist.rst: sort entries and adjust table marginsMauro Carvalho Chehab1-403/+402
Some entries are out of order. While here, clear spaces/tabs. The content remains the same, with the exeption of one duplicated entry from the same driver, where two different brand names share the same entry. The content of such cell was merged, using a comma. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] Documentation: Add HSV encodingsRicardo Ribalda Delgado5-4/+44
Describe the hsv_enc field and its use. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] Documentation: Add Ricardo RibaldaRicardo Ribalda Delgado1-0/+4
My initials were on the Changelog, but there was no link to my name. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] Documentation: Add HSV formatRicardo Ribalda Delgado4-0/+181
Describe the HSV formats Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] pixfmt-reserved.rst: Improve MT21C documentationHans Verkuil1-5/+5
Improve the MT21C documentation, making it clearer that this format requires the MDP for further processing. Also fix the fourcc (it was a fivecc :-) ) Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] docs-rst: Add compressed video formats used on MT8173 codec driverTiffany Lin1-1/+9
Add V4L2_PIX_FMT_MT21C documentation Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] Add documentation for V4L2_PIX_FMT_VP9Tiffany Lin1-0/+5
Add documentation for V4L2_PIX_FMT_VP9. Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-05Merge tag 'v4.8' into patchworkMauro Carvalho Chehab2-5/+28
Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...