summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2021-02-12hwmon: add Texas Instruments TPS23861 driverRobert Marko2-0/+42
Add basic monitoring support as well as port on/off control for Texas Instruments TPS23861 PoE PSE IC. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210121134434.2782405-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Add support for MAX16508Guenter Roeck1-2/+10
MAX16508 is quite similar to MAX16601, except that it does not support the DEFAULT_NUM_POP register and we thus can not dynamically determine the number of populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-2-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Determine and use number of populated phasesGuenter Roeck1-112/+73
The MAX16601 can report the number of populated phases. Use this information to only create sysfs attributes for populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-1-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: Add AHT10 Temperature and Humidity Sensor DriverJohannes Cornelis Draaijer (datdenkikniet)2-0/+47
This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (nct6683) Support ASRock boardsBlaž Hrastnik1-0/+1
Tested with ASRock X570 Phantom Gaming-ITX/TB3. It also appears on other ASRock boards. Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Link: https://lore.kernel.org/r/b08d641c-3fb5-4845-85f7-e1753149cd7d@www.fastmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (abx500) Decomission abx500 driverGuenter Roeck3-60/+0
This deletes the ABx500 hwmon driver, the only supported variant being the AB8500. This driver has been replaced by generic frameworks. By inspecting the abx500 sysfs files we see that it contains things such as temp1_max, temp1_max_alarm, temp1_max_hyst, temp1_max_hyst_alarm, temp1_min, temp1_min_alarm. It becomes obvious that the abx500.c is a reimplementation of thermal zones. This is not very strange as the generic thermal zones were not invented when this driver was merged so people were rolling their own. The ab8500.c driver contains conversion tables for handling a thermistor on ADC channels AUX1 and AUX2. I managed to replace the functionality of the driver with: - Activation of the ntc_thermistor.c driver, CONFIG_SENSORS_NTC_THERMISTOR - Activation of thermal zones, CONFIG_THERMAL - In the device tree, connecting the NTC driver to the processed IIO channels from the AB8500 GPADC ADC forming two instances of NTC sensors. - Connecting the two NTC sensors to a "chassis" thermal zone in the device tree and setting that to hit the CPU frequency at 50 degrees celsius and do a critical shutdown at 70 degrees celsius, deploying a policy using the sensors. After talking to the original authors we concluded that the driver was never properly parameterized in production so what we now have in the device tree is already puts the thermistors to better use than what the hwmon driver did. The two remaining channels for two battery temperatures is already handled in the charging algorithms but can be optionally extended to thermal zones as well if we want these to trigger critical shutdown for the platform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201221125521.768082-1-linus.walleij@linaro.org [groeck: Removed documentation and fixed up Makefile, Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-21hwmon: (ina2) update ti,ina2xx.yaml reference in documentationMauro Carvalho Chehab1-1/+1
Changeset 94f1ab944565 ("dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema") renamed: Documentation/devicetree/bindings/hwmon/ina2xx.txt to: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/886bd248721b146d844d46e26ddd4cd277f51446.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-30hwmon: (sbtsi_temp) Fix Documenation kernel-doc warningRandy Dunlap1-1/+1
Fix Documentation/hwmon/ kernel-doc warning in 5.11-rc1: lnx-511-rc1/Documentation/hwmon/sbtsi_temp.rst:4: WARNING: Title underline too short. Kernel driver sbtsi_temp ================== Fixes: 6ec3fcf556fe ("hwmon: (sbtsi) Add documentation") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kun Yi <kunyi@google.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20201229035428.31270-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-12hwmon: (sbtsi) Add documentationKun Yi2-0/+43
Document the SB-TSI sensor interface driver. Signed-off-by: Kun Yi <kunyi@google.com> Link: https://lore.kernel.org/r/20201211215427.3281681-3-kunyi@google.com [groeck: Added SPDX license identifier, same as source] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schemaKrzysztof Kozlowski1-1/+1
Convert the Analog Devices ADM1275 bindings to dt-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117220807.208747-4-krzk@kernel.org [groeck: Removed unnecessary type ($ref) declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (pmbus/q54sj108a2) Correct title underline lengthLukas Bulwahn1-1/+1
Commit b722d7b9e4da ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2") provides new documentation for DELTA Q54SJ108A2NC* drivers, but the title underline was too short. make htmldocs warns: Documentation/hwmon/q54sj108a2.rst:4: WARNING: Title underline too short. Adjust the title underline to the correct length. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20201207152658.32444-1-lukas.bulwahn@gmail.com [groeck: Adjust subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (ltc2992) Add supportAlexandru Tachici2-0/+57
LTC2992 is a rail-to-rail system monitor that measures current, voltage, and power of two supplies. Two ADCs simultaneously measure each supply’s current. A third ADC monitors the input voltages and four auxiliary external voltages. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2xiao.ma2-0/+55
The driver supports Q54SJ108A2 series modules of Delta. Standard attributes are in sysfs, and other attributes are in debugfs. Signed-off-by: xiao.ma <xiao.mx.ma@deltaww.com> Link: https://lore.kernel.org/r/20201202025900.1842-1-max701@126.com [groeck: Replaced spaces with tabs, dropped excessive spaces, fixed module prefix in documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-07hwmon: Add driver for STMicroelectronics PM6764 Voltage RegulatorCharles2-0/+33
Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator. the output voltage use the MFR_READ_VOUT 0xD4 vout value returned is linear11 Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com> [groeck: Fixed various compile errors; marked pm6764tr_of_match __maybe_unused] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: (nct6683) Support NCT6687D.David Bartley1-1/+2
This is found on many MSI motherboards. Signed-off-by: David Bartley <andareed@gmail.com> Link: https://lore.kernel.org/r/20201202025057.5492-1-andareed@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02docs: hwmon: Document max127 driverTao Ren2-0/+46
Add documentation for the max127 hardware monitoring driver. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201123185658.7632-3-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02docs: hwmon: (amd_energy) update documentationNaveen Krishna Chatradhi1-1/+6
Update the supported processors and mention vulnerability fix. Signed-off-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com> Link: https://lore.kernel.org/r/20201119184246.228322-2-NaveenKrishna.Chatradhi@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: add Corsair PSU HID controller driverWilken Gottwalt2-0/+83
The Corsair digital power supplies of the series RMi, HXi and AXi include a small micro-controller with a lot of sensors attached. The sensors can be accessed by an USB connector from the outside. This micro-controller provides the data by a simple proprietary USB HID protocol. The data consist of temperatures, current and voltage levels, power usage, uptimes, fan speed and some more. It is also possible to configure the PSU (fan mode, mono/multi-rail, over current protection). This driver provides access to the sensors/statistics of the RMi and HXi series power supplies. It does not support configuring these devices, because there would be many ways to misconfigure or even damage the PSU. This patch adds: - hwmon driver corsair-psu - hwmon documentation - updates MAINTAINERS Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/20201027131710.GA253280@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: (pmbus) shrink code and remove pmbus_do_remove()Bartosz Golaszewski2-12/+0
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and remove pmbus_do_remove() entirely from all pmbus drivers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201026105352.20359-1-brgl@bgdev.pl [groeck: Removed references to pmbus_do_remove from documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-28docs: hwmon: mp2975.rst: address some html build warningsMauro Carvalho Chehab2-1/+14
.../Documentation/hwmon/mp2975.rst:25: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:27: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:69: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:70: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:72: WARNING: Bullet list ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst: WARNING: document isn't included in any toctree List blocks should have blank lines before and after them, in order to be properly parsed. Fixes: 4beb7a028e9f ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/b02f98d886ab1f5af233f8999c7a15529fc52cdc.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28docs: hwmon: adm1266.rst: fix a broken referenceMauro Carvalho Chehab1-1/+1
The reference was missing the extension, causing the check script to complain. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3d64372dabcdcea144cdc9972c245812ea2a84cb.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds2-0/+37
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-13Merge tag 'hwmon-for-v5.10' of ↵Linus Torvalds10-8/+345
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New driver and chip support: - Moortec MR75203 PVT controller - MPS Multi-phase mp2975 controller - ADM1266 - Zen3 CPUs - Intel MAX 10 BMC Enhancements: - Support for rated attributes in hwmon core - MAX20730: - Device monitoring via debugfs - VOUT readin adjustment vie devicetree bindings - LM75: - Devicetree support - Regulator support - Improved accumulationm logic in amd_energy driver - Added fan sensor to gsc-hwmon driver - Support for simplified I2C probing Various other minor fixes and improvements" * tag 'hwmon-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (pmbus/max20730) adjust the vout reading given voltage divider dt-bindings: hwmon: max20730: adding device tree doc for max20730 hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller hwmon: Add DT bindings schema for PVT controller dt-bindings: hwmon: Add the +vs supply to the lm75 bindings dt-bindings: hwmon: Convert lm75 bindings to yaml docs: hwmon: (ltc2945) update datasheet link hwmon: (mlxreg-fan) Fix double "Mellanox" hwmon: (pmbus/max20730) add device monitoring via debugfs hwmon: (pmbus/max34440) Fix OC fault limits hwmon: (bt1-pvt) Wait for the completion with timeout hwmon: (bt1-pvt) Cache current update timeout hwmon: (bt1-pvt) Test sensor power supply on probe hwmon: (lm75) Add regulator support hwmon: Add hwmon driver for Intel MAX 10 BMC dt-bindings: Add MP2975 voltage regulator device hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller hwmon: (tmp513) fix spelling typo in comments hwmon: (amd_energy) Update driver documentation hwmon: (amd_energy) Improve the accumulation logic ...
2020-10-05docs: hwmon: (ltc2945) update datasheet linkAlexandru Ardelean1-1/+1
Old one isn't working anymore. Update to the latest datasheet link. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201005131226.1774081-1-alexandru.ardelean@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: Add hwmon driver for Intel MAX 10 BMCXu Yilun2-0/+79
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC chip connects to a set of sensor chips to monitor current, voltage, thermal and power of different components on board. The BMC firmware is responsible for sensor data sampling and recording in shared registers. Host driver reads the sensor data from these shared registers and exposes them to users as hwmon interfaces. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com [groeck: Adjusted subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controllerVadim Pasternak1-0/+116
Add support for mp295 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase controller. This device: - Supports two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail 2. - Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for configuration. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20200926204957.10268-2-vadimp@nvidia.com [groeck: Cleaned up a couple of error returns; fixed up API changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (amd_energy) Update driver documentationNaveen Krishna Chatradhi1-0/+5
Update the documentation with the newly added features * Set the accumulation interval based on resolution Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200929105322.8919-5-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Add support for ADM1266Alexandru Tachici2-0/+38
Add pmbus probing driver for the adm1266 Cascadable Super Sequencer with Margin Control and Fault Recording. Driver is using the pmbus_core, creating sysfs files under hwmon for inputs: vh1->vh4 and vp1->vp13. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-2-alexandru.tachici@analog.com [groeck: Use .probe_new function, adjust for changed pmbus_do_probe API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon (pmbus) use simple i2c probe functionStephen Kitt2-6/+4
pmbus_do_probe doesn't use the id information provided in its second argument, so this can be removed, which then allows using the single-parameter i2c probe function ("probe_new") for probes. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * configured v. probed comparisons are performed by comparing the configured name to the detected name, instead of the ids; this involves strcmp but is still cheaper than comparing all the device names when scanning the tables; * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. Additionally, the mismatch message in the ltc2978 driver is adjusted so that it no longer assumes that the driver_data is an index into ltc2978_id. Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (drivetemp) Add usage not describing impact on drive spin-downGuenter Roeck1-0/+18
On some drives, reading the drive temperature resets the drive's spin-down timer. If the drive temperature is read too often, affected drives will never spin down. Add this information as usage note to the driver documentation. Reported-by: Peter Sulyok <peter@sulyok.net> Cc: Peter Sulyok <peter@sulyok.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/core) Add support for rated attributesZbigniew Lukwinski1-1/+14
Adding implementation for new attributes (rated_min/rated_max) to cover PMBus specification about rated values reporting: MFR_VIN_MIN, MFR_VIN_MAX, MFR_IIN_MAX, MFR_PIN_MAX, MFR_VOUT_MIN, MFR_VOUT_MAX, MFR_IOUT_MAX, MFR_POUT_MAX, MFR_MAX_TEMP_1/2/3. Tested with OpenBMC stack. All rated attributes were available and reported correct values. Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com> Link: https://lore.kernel.org/r/1596224237-32280-4-git-send-email-zbigniew.lukwinski@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23docs: hwmon: Add attributes to report rated valuesZbigniew Lukwinski1-0/+70
New attributes (rated_min/rated_max) are being added the hwmon ABI. They are needed to cover rated values documented by PMBus specification: PMBus Power System Mgt Protocol Specification - Part II – Revision 1.3.1, chapters: 22.3.1 - 22.3.10, 22.3.15 Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com> Link: https://lore.kernel.org/r/1596224237-32280-2-git-send-email-zbigniew.lukwinski@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-17hwmon: Add support for the sl28cpld hardware monitoring controllerMichael Walle2-0/+37
Add support for the hardware monitoring controller of the sl28cpld board management controller. This driver is part of a multi-function device. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-10docs: add some new files to their respective index.rst filesMauro Carvalho Chehab1-0/+1
There were some new file additions for Kernel 5.7 and 5.8 that weren't added at the corresponding index file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9fd4d04f0d122ff38b5342a0098d99cc2f546652.1599660067.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-24Documentation: fix typo for abituguru documentationBrandon Jiang3-7/+7
Typo fix for abituguru,abituguru3 and abituguru-datasheet Signed-off-by: Brandon Jiang <brandon.jiang.a@outlook.com> Link: https://lore.kernel.org/r/DM5PR22MB0892E4FEFCA9ED055B0A8E71AC580@DM5PR22MB0892.namprd22.prod.outlook.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-05Merge tag 'hwmon-for-v5.9' of ↵Linus Torvalds46-113/+196
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Highlights: - New driver for Sparx5 SoC temperature sensot - New driver for Corsair Commander Pro - MAX20710 support added to max20730 driver Enhancements: - max6697: Allow max6581 to create tempX_offset attributes - gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode - adm1275: Enable adm1278 ADM1278_TEMP1_EN - dell-smm: Add Latitude 5480 to fan control whitelist Fixes: - adc128d818: Fix advanced configuration register init - pmbus/core: Use s64 instead of long for calculations to fix overflow issues with 32-bit architectures Plus various cleanups in several drivers" * tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits) hwmon: (adc128d818) Fix advanced configuration register init hwmon: (axi-fan-control) remove duplicate macros hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value hwmon: (sparx5) Make symbol 's5_temp_match' static hwmon: (corsair-cpro) add reading pwm values hwmon: sparx5: Add Sparx5 SoC temperature driver dt-bindings: hwmon: Add Sparx5 temperature sensor hwmon: (tmp401) Replace HTTP links with HTTPS ones hwmon: (lm95234) Replace HTTP links with HTTPS ones hwmon: (lm90) Replace HTTP links with HTTPS ones hwmon: (k8temp) Replace HTTP links with HTTPS ones hwmon: (jc42) Replace HTTP links with HTTPS ones hwmon: (ina2xx) Replace HTTP links with HTTPS ones hwmon: (ina209) Replace HTTP links with HTTPS ones hwmon: Replace HTTP links with HTTPS ones docs: hwmon: Replace HTTP links with HTTPS ones hwmon: (adm1025) Replace HTTP links with HTTPS ones hwmon: add Corsair Commander Pro driver hwmon: (max6697) Allow max6581 to create tempX_offset hwmon: (tmmp513) Replace HTTP links with HTTPS links ...
2020-07-27ACPI: Use valid link to the ACPI specificationTiezhu Yang1-1/+1
Currently, acpi.info is an invalid link to access ACPI specification, the new valid link is https://uefi.org/specifications. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-24hwmon: (corsair-cpro) add reading pwm valuesMarius Zachmann1-4/+3
This adds the possibility for reading pwm values. These can not be read if the device is controlled via fan_target or a fan curve and will return an error in this case. Since an error is expected, this adds some rudimentary error handling. Changes: - add CTL_GET_FAN_PWM and use it via get_data - pwm returns -ENODATA if the device returns error 0x12 - fan_target now returns -ENODATA when the driver is started or a pwm value is set. - add ccp_get_errno to determine errno from device error. - get_data now has a parameter to determine whether to read one or two bytes of data. - update documentation - fix missing surname in MAINTAINERS Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: sparx5: Add Sparx5 SoC temperature driverLars Povlsen1-0/+33
This patch adds a temperature sensor driver to the Sparx5 SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200618135951.25441-4-lars.povlsen@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (tmp401) Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719192544.61247-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (lm95234) Replace HTTP links with HTTPS onesAlexander A. Klimov1-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719191534.61181-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (lm90) Replace HTTP links with HTTPS onesAlexander A. Klimov1-5/+5
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719190525.61112-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (k8temp) Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719183548.61011-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (jc42) Replace HTTP links with HTTPS onesAlexander A. Klimov1-13/+13
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719182539.60944-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (ina2xx) Replace HTTP links with HTTPS onesAlexander A. Klimov1-5/+5
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719181530.60878-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (ina209) Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719180521.60811-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: Replace HTTP links with HTTPS onesAlexander A. Klimov22-53/+53
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719175512.60745-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24docs: hwmon: Replace HTTP links with HTTPS onesAlexander A. Klimov7-24/+24
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719170420.60399-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: add Corsair Commander Pro driverMarius Zachmann2-0/+43
This is v7 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. The Corsair Commander Pro is a fan controller and provides no means for user interaction. The two device numbers are there, because there is a slightly different version of the same device. (Only difference seem to be in some presets.) Squashed: hwmon: (corsair-cpro) add fan_target This adds fan_target entries to the corsair-cpro driver. Reading the attribute from the device does not seem possible, so it returns the last set value (same as pwm). send_usb_cmd now has one more argument, which is needed for the fan_target command. hwmon: corsair-cpro: Change to HID driver This changes corsair-cpro to a hid driver using hid reports. Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de [groeck: Squashed follow-up patches to avoid changes in HID code] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (tmmp513) Replace HTTP links with HTTPS linksAlexander A. Klimov1-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200703185657.15329-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 15:57:42 +0000