summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17hwmon: (pmbus) Add driver for Delta DPS-920AB PSURobert Marko2-0/+74
This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driverErik Rosen2-0/+106
Add documentation and index link for pim4328 PMBus driver. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markupMauro Carvalho Chehab1-1/+2
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/32b0db7e79a3ed0e817213113c607a1b819e3867.1622898327.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (max31790) Fix pwmX_enable attributesGuenter Roeck1-1/+1
pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-06-17hwmon: (max31790) Report correct current pwm duty cyclesGuenter Roeck1-1/+2
The MAX31790 has two sets of registers for pwm duty cycles, one to request a duty cycle and one to read the actual current duty cycle. Both do not have to be the same. When reporting the pwm duty cycle to the user, the actual pwm duty cycle from pwm duty cycle registers needs to be reported. When setting it, the pwm target duty cycle needs to be written. Since we don't know the actual pwm duty cycle after a target pwm duty cycle has been written, set the valid flag to false to indicate that actual pwm duty cycle should be read from the chip instead of using cached values. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@ceesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
2021-06-17hwmon: Add sht4x Temperature and Humidity Sensor DriverNavin Sankar Velliangiri2-0/+46
This patch adds a hwmon driver for the SHT4x Temperature and Humidity sensor. Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> [groeck: dropped unnecessary empty line and continuation lines] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17docs: hwmon: Add an entry for mp2888Fabio Estevam1-0/+1
The entry for mp2888 is missing and it causes the following 'make htmldocs' build warning: Documentation/hwmon/mp2888.rst: WARNING: document isn't included in any toctree Add the mp2888 entry. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210521172218.37592-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controllerVadim Pasternak1-0/+113
Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a digital, multi-phase, pulse-width modulation controller. This device supports: - One power rail. - Programmable Multi-Phase up to 10 Phases. - PWM-VID Interface - One pages 0 for telemetry. - Programmable pins for PMBus Address. - Built-In EEPROM to Store Custom Configurations. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com [groeck: Add MODULE_IMPORT_NS] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for additional Flex BMR converters to pmbusErik Rosen1-4/+7
Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491 and BMR492 to the pmbus driver Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-4-erik.rosen@metormote.com [groeck: Fixed minor whitespace error] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add documentation for new flagsErik Rosen1-4/+38
Add documentation for the new pmbus flags PMBUS_WRITE_PROTECTED, PMBUS_NO_CAPABILITY and PMBUS_READ_STATUS_AFTER_FAILED_CHECK Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-3-erik.rosen@metormote.com [groeck: Added newline at end of file] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17docs: hwmon: avoid using UTF-8 charsMauro Carvalho Chehab2-2/+2
While UTF-8 characters can be used at the Linux documentation, the best is to use them only when ASCII doesn't offer a good replacement. So, replace the occurences of the following UTF-8 characters: - U+2010 ('‐'): HYPHEN - U+2013 ('–'): EN DASH - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/ccdd1bf45963a7748188a97c75f667b37bd43d2f.1620641727.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17docs: hwmon: ir36021.rst: replace some charactersMauro Carvalho Chehab1-1/+1
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+2010 ('‐'): HYPHEN as ASCII HYPHEN is preferred over U+2010 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/ba8b5122ac9d4918fd966d0eb0a5ca9d89044b04.1621159997.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm75) Add TI TMP1075 supportRobert Marko1-2/+4
TI TMP1075 is a LM75 compatible sensor, so lets add support for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210429121150.106804-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/zl6100) Update documentation for zl6100 driverErik Rosen1-43/+89
Update documentation for zl6100 driver and fix dead links to technical specifications Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210423153329.33457-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-11docs: hwmon: tmp103.rst: fix bad usage of UTF-8 charsMauro Carvalho Chehab1-2/+2
While UTF-8 characters can be used at the Linux documentation, the best is to use them only when ASCII doesn't offer a good replacement. So, replace the occurences of the following UTF-8 characters: - U+2013 ('–'): EN DASH In this specific case, EN DASH was used instead of a minus sign. So, replace it by a single hyphen. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/73b3c7c1eef5c12ddc941624d23689313bd56529.1620744606.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20hwmon: Remove amd_energy driverGuenter Roeck2-120/+0
Commit 60268b0e8258 ("hwmon: (amd_energy) modify the visibility of the counters") restricted visibility of AMD energy counters to work around a side-channel attack using energy data to determine which instructions are executed. The attack is described in 'PLATYPUS: Software-based Power Side-Channel Attacks on x86'. It relies on quick and accurate energy readings. This change made the counters provided by the amd_energy driver effectively unusable for non-provileged users. However, unprivileged read access is the whole point of hardware monitoring attributes. An attempt to remedy the situation by limiting and randomizing access to chip registers was rejected by AMD. Since the driver is for all practical purposes unusable, remove it. Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Clarify scope of attribute accessGuenter Roeck1-0/+8
Hardware monitoring sysfs attributes are used and displayed by unrestricted userspace applications. Standard attributes therefore have to be world readable, since otherwise those userspace applications would either have to run as super-user or display an error. None of those makes sense. Clarify the expected scope of attribute access in the ABI document. Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add pmbus driver for MAX15301Erik Rosen2-0/+88
Add pmbus driver support for Maxim MAX15301 InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry Even though the specification does not specifically mention it, extensive empirical testing has revealed that auto-detection of limit-registers will fail in a random fashion unless the delay parameter is set to above about 80us. The default delay is set to 100us to include some safety margin. This patch is tested on a Flex BMR461 converter module. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com [groeck: Added rationale for delay to driver header] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Add driver for fsp-3y PSUs and PDUsVáclav Kubernát2-0/+29
This patch adds support for these devices: - YH-5151E - the PDU - YM-2151E - the PSU The device datasheet says that the devices support PMBus 1.2, but in my testing, a lot of the commands aren't supported and if they are, they sometimes behave strangely or inconsistently. For example, writes to the PAGE command requires using PEC, otherwise the write won't work and the page won't switch, even though, the standard says that PEC is optional. On the other hand, writes to SMBALERT don't require PEC. Because of this, the driver is mostly reverse engineered with the help of a tool called pmbus_peek written by David Brownell (and later adopted by my colleague Jan Kundrát). The device also has some sort of a timing issue when switching pages, which is explained further in the code. Because of this, the driver support is limited. It exposes only the values that have been tested to work correctly. Signed-off-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210414080019.3530794-1-kubernat@cesnet.cz [groeck: Fixed up "missing braces around initializer" from 0-day] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/tps53679) Add support for TI TPS53676Erik Rosen1-2/+11
Add support for TI TPS53676 controller to the tps53679 pmbus driver The driver uses the USER_DATA_03 register to figure out how many phases are enabled and to which channel they are assigned, and sets the number of pages and phases accordingly. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210322193734.75127-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for BluTek BPA-RS600Chris Packham2-0/+75
The BPA-RS600 is a compact 600W AC to DC removable power supply module. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210317040231.21490-3-chris.packham@alliedtelesis.co.nz [groeck: Added bpa-rs600 to index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: add driver for NZXT Kraken X42/X52/X62/X72Jonas Malaco2-0/+43
These are "all-in-one" CPU liquid coolers that can be monitored and controlled through a proprietary USB HID protocol. While the models have differently sized radiators and come with varying numbers of fans, they are all indistinguishable at the software level. The driver exposes fan/pump speeds and coolant temperature through the standard hwmon sysfs interface. Fan and pump control, while supported by the devices, are not currently exposed. The firmware accepts up to 61 trip points per channel (fan/pump), but the same set of trip temperatures has to be maintained for both; with pwmX_auto_point_Y_temp attributes, users would need to maintain this invariant themselves. Instead, fan and pump control, as well as LED control (which the device also supports for 9 addressable RGB LEDs on the CPU water block) are left for existing and already mature user-space tools, which can still be used alongside the driver, thanks to hidraw. A link to one, which I also maintain, is provided in the documentation. The implementation is based on USB traffic analysis. It has been runtime tested on x86_64, both as a built-in driver and as a module. Signed-off-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20210319045544.416138-1-jonas@protocubo.io [groeck: Removed unnecessary spinlock.h include] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) add support for critical valuesWilken Gottwalt1-1/+12
Adds support for reading the critical values of the temperature sensors and the rail sensors (voltage and current) once and caches them. Updates the naming of the constants following a more clear scheme. Also updates the documentation and fixes some typos. Updates is_visible and ops_read functions to be more readable. The new sensors output of a Corsair HX850i will look like this: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +46.2°C (crit = +70.0°C) case temp: +39.8°C (crit = +70.0°C) power total: 152.00 W power +12v: 108.00 W power +5v: 41.00 W power +3.3v: 5.00 W curr +12v: 9.00 A (crit max = +85.00 A) curr +5v: 8.31 A (crit max = +40.00 A) curr +3.3v: 1.62 A (crit max = +40.00 A) Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YFNg6vGk3sQmyqgB@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driverErik Rosen2-0/+91
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for Infineon IR36021Chris Packham2-0/+64
The IR36021 is a dual‐loop digital multi‐phase buck controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210301035954.16713-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-12hwmon: add Texas Instruments TPS23861 driverRobert Marko2-0/+42
Add basic monitoring support as well as port on/off control for Texas Instruments TPS23861 PoE PSE IC. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210121134434.2782405-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Add support for MAX16508Guenter Roeck1-2/+10
MAX16508 is quite similar to MAX16601, except that it does not support the DEFAULT_NUM_POP register and we thus can not dynamically determine the number of populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-2-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Determine and use number of populated phasesGuenter Roeck1-112/+73
The MAX16601 can report the number of populated phases. Use this information to only create sysfs attributes for populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-1-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: Add AHT10 Temperature and Humidity Sensor DriverJohannes Cornelis Draaijer (datdenkikniet)2-0/+47
This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (nct6683) Support ASRock boardsBlaž Hrastnik1-0/+1
Tested with ASRock X570 Phantom Gaming-ITX/TB3. It also appears on other ASRock boards. Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Link: https://lore.kernel.org/r/b08d641c-3fb5-4845-85f7-e1753149cd7d@www.fastmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (abx500) Decomission abx500 driverGuenter Roeck3-60/+0
This deletes the ABx500 hwmon driver, the only supported variant being the AB8500. This driver has been replaced by generic frameworks. By inspecting the abx500 sysfs files we see that it contains things such as temp1_max, temp1_max_alarm, temp1_max_hyst, temp1_max_hyst_alarm, temp1_min, temp1_min_alarm. It becomes obvious that the abx500.c is a reimplementation of thermal zones. This is not very strange as the generic thermal zones were not invented when this driver was merged so people were rolling their own. The ab8500.c driver contains conversion tables for handling a thermistor on ADC channels AUX1 and AUX2. I managed to replace the functionality of the driver with: - Activation of the ntc_thermistor.c driver, CONFIG_SENSORS_NTC_THERMISTOR - Activation of thermal zones, CONFIG_THERMAL - In the device tree, connecting the NTC driver to the processed IIO channels from the AB8500 GPADC ADC forming two instances of NTC sensors. - Connecting the two NTC sensors to a "chassis" thermal zone in the device tree and setting that to hit the CPU frequency at 50 degrees celsius and do a critical shutdown at 70 degrees celsius, deploying a policy using the sensors. After talking to the original authors we concluded that the driver was never properly parameterized in production so what we now have in the device tree is already puts the thermistors to better use than what the hwmon driver did. The two remaining channels for two battery temperatures is already handled in the charging algorithms but can be optionally extended to thermal zones as well if we want these to trigger critical shutdown for the platform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201221125521.768082-1-linus.walleij@linaro.org [groeck: Removed documentation and fixed up Makefile, Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-21hwmon: (ina2) update ti,ina2xx.yaml reference in documentationMauro Carvalho Chehab1-1/+1
Changeset 94f1ab944565 ("dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema") renamed: Documentation/devicetree/bindings/hwmon/ina2xx.txt to: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/886bd248721b146d844d46e26ddd4cd277f51446.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-30hwmon: (sbtsi_temp) Fix Documenation kernel-doc warningRandy Dunlap1-1/+1
Fix Documentation/hwmon/ kernel-doc warning in 5.11-rc1: lnx-511-rc1/Documentation/hwmon/sbtsi_temp.rst:4: WARNING: Title underline too short. Kernel driver sbtsi_temp ================== Fixes: 6ec3fcf556fe ("hwmon: (sbtsi) Add documentation") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kun Yi <kunyi@google.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20201229035428.31270-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-12hwmon: (sbtsi) Add documentationKun Yi2-0/+43
Document the SB-TSI sensor interface driver. Signed-off-by: Kun Yi <kunyi@google.com> Link: https://lore.kernel.org/r/20201211215427.3281681-3-kunyi@google.com [groeck: Added SPDX license identifier, same as source] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schemaKrzysztof Kozlowski1-1/+1
Convert the Analog Devices ADM1275 bindings to dt-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117220807.208747-4-krzk@kernel.org [groeck: Removed unnecessary type ($ref) declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (pmbus/q54sj108a2) Correct title underline lengthLukas Bulwahn1-1/+1
Commit b722d7b9e4da ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2") provides new documentation for DELTA Q54SJ108A2NC* drivers, but the title underline was too short. make htmldocs warns: Documentation/hwmon/q54sj108a2.rst:4: WARNING: Title underline too short. Adjust the title underline to the correct length. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20201207152658.32444-1-lukas.bulwahn@gmail.com [groeck: Adjust subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (ltc2992) Add supportAlexandru Tachici2-0/+57
LTC2992 is a rail-to-rail system monitor that measures current, voltage, and power of two supplies. Two ADCs simultaneously measure each supply’s current. A third ADC monitors the input voltages and four auxiliary external voltages. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2xiao.ma2-0/+55
The driver supports Q54SJ108A2 series modules of Delta. Standard attributes are in sysfs, and other attributes are in debugfs. Signed-off-by: xiao.ma <xiao.mx.ma@deltaww.com> Link: https://lore.kernel.org/r/20201202025900.1842-1-max701@126.com [groeck: Replaced spaces with tabs, dropped excessive spaces, fixed module prefix in documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-07hwmon: Add driver for STMicroelectronics PM6764 Voltage RegulatorCharles2-0/+33
Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator. the output voltage use the MFR_READ_VOUT 0xD4 vout value returned is linear11 Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com> [groeck: Fixed various compile errors; marked pm6764tr_of_match __maybe_unused] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: (nct6683) Support NCT6687D.David Bartley1-1/+2
This is found on many MSI motherboards. Signed-off-by: David Bartley <andareed@gmail.com> Link: https://lore.kernel.org/r/20201202025057.5492-1-andareed@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02docs: hwmon: Document max127 driverTao Ren2-0/+46
Add documentation for the max127 hardware monitoring driver. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201123185658.7632-3-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02docs: hwmon: (amd_energy) update documentationNaveen Krishna Chatradhi1-1/+6
Update the supported processors and mention vulnerability fix. Signed-off-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com> Link: https://lore.kernel.org/r/20201119184246.228322-2-NaveenKrishna.Chatradhi@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: add Corsair PSU HID controller driverWilken Gottwalt2-0/+83
The Corsair digital power supplies of the series RMi, HXi and AXi include a small micro-controller with a lot of sensors attached. The sensors can be accessed by an USB connector from the outside. This micro-controller provides the data by a simple proprietary USB HID protocol. The data consist of temperatures, current and voltage levels, power usage, uptimes, fan speed and some more. It is also possible to configure the PSU (fan mode, mono/multi-rail, over current protection). This driver provides access to the sensors/statistics of the RMi and HXi series power supplies. It does not support configuring these devices, because there would be many ways to misconfigure or even damage the PSU. This patch adds: - hwmon driver corsair-psu - hwmon documentation - updates MAINTAINERS Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/20201027131710.GA253280@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02hwmon: (pmbus) shrink code and remove pmbus_do_remove()Bartosz Golaszewski2-12/+0
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and remove pmbus_do_remove() entirely from all pmbus drivers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201026105352.20359-1-brgl@bgdev.pl [groeck: Removed references to pmbus_do_remove from documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-28docs: hwmon: mp2975.rst: address some html build warningsMauro Carvalho Chehab2-1/+14
.../Documentation/hwmon/mp2975.rst:25: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:27: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:69: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:70: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:72: WARNING: Bullet list ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst: WARNING: document isn't included in any toctree List blocks should have blank lines before and after them, in order to be properly parsed. Fixes: 4beb7a028e9f ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/b02f98d886ab1f5af233f8999c7a15529fc52cdc.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28docs: hwmon: adm1266.rst: fix a broken referenceMauro Carvalho Chehab1-1/+1
The reference was missing the extension, causing the check script to complain. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3d64372dabcdcea144cdc9972c245812ea2a84cb.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds2-0/+37
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-13Merge tag 'hwmon-for-v5.10' of ↵Linus Torvalds10-8/+345
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New driver and chip support: - Moortec MR75203 PVT controller - MPS Multi-phase mp2975 controller - ADM1266 - Zen3 CPUs - Intel MAX 10 BMC Enhancements: - Support for rated attributes in hwmon core - MAX20730: - Device monitoring via debugfs - VOUT readin adjustment vie devicetree bindings - LM75: - Devicetree support - Regulator support - Improved accumulationm logic in amd_energy driver - Added fan sensor to gsc-hwmon driver - Support for simplified I2C probing Various other minor fixes and improvements" * tag 'hwmon-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (pmbus/max20730) adjust the vout reading given voltage divider dt-bindings: hwmon: max20730: adding device tree doc for max20730 hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller hwmon: Add DT bindings schema for PVT controller dt-bindings: hwmon: Add the +vs supply to the lm75 bindings dt-bindings: hwmon: Convert lm75 bindings to yaml docs: hwmon: (ltc2945) update datasheet link hwmon: (mlxreg-fan) Fix double "Mellanox" hwmon: (pmbus/max20730) add device monitoring via debugfs hwmon: (pmbus/max34440) Fix OC fault limits hwmon: (bt1-pvt) Wait for the completion with timeout hwmon: (bt1-pvt) Cache current update timeout hwmon: (bt1-pvt) Test sensor power supply on probe hwmon: (lm75) Add regulator support hwmon: Add hwmon driver for Intel MAX 10 BMC dt-bindings: Add MP2975 voltage regulator device hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller hwmon: (tmp513) fix spelling typo in comments hwmon: (amd_energy) Update driver documentation hwmon: (amd_energy) Improve the accumulation logic ...
2020-10-05docs: hwmon: (ltc2945) update datasheet linkAlexandru Ardelean1-1/+1
Old one isn't working anymore. Update to the latest datasheet link. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201005131226.1774081-1-alexandru.ardelean@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: Add hwmon driver for Intel MAX 10 BMCXu Yilun2-0/+79
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC chip connects to a set of sensor chips to monitor current, voltage, thermal and power of different components on board. The BMC firmware is responsible for sensor data sampling and recording in shared registers. Host driver reads the sensor data from these shared registers and exposes them to users as hwmon interfaces. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com [groeck: Adjusted subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 05:38:13 +0000