summaryrefslogtreecommitdiffstats
path: root/Documentation/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-05-11Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-20/+121
drm-misc-next is still based on v4.16-rc7, and was getting a bit stale. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-05-04Merge tag 'drm-intel-next-2018-04-13' of ↵Dave Airlie1-20/+121
git://anongit.freedesktop.org/drm/drm-intel into drm-next First drm/i915 feature batch heading for v4.18: - drm-next backmerge to fix build (Rodrigo) - GPU documentation improvements (Kevin) - GuC and HuC refactoring, host/GuC communication, logging, fixes, and more (mostly Michal and Michał, also Jackie, Michel and Piotr) - PSR and PSR2 enabling and fixes (DK, José, Rodrigo and Chris) - Selftest updates (Chris, Daniele) - DPLL management refactoring (Lucas) - DP MST fixes (Lyude and DK) - Watermark refactoring and changes to support NV12 (Mahesh) - NV12 prep work (Chandra) - Icelake Combo PHY enablers (Manasi) - Perf OA refactoring and ICL enabling (Lionel) - ICL enabling (Oscar, Paulo, Nabendu, Mika, Kelvin, Michel) - Workarounds refactoring (Oscar) - HDCP fixes and improvements (Ramalingam, Radhakrishna) - Power management fixes (Imre) - Various display fixes (Maarten, Ville, Vidya, Jani, Gaurav) - debugfs for FIFO underrun clearing (Maarten) - Execlist improvements (Chris) - Reset improvements (Chris) - Plenty of things here and there I overlooked and/or didn't understand... (Everyone) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lgd2cze8.fsf@intel.com
2018-05-03drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+Eric Anholt1-0/+1
This driver will be used to support Mesa on the Broadcom 7268 and 7278 platforms. V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's complicated CL/shader validation scheme. This massively changes the GEM behavior, so I've forked off to a new driver. v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild test robot. Drop personal git link from MAINTAINERS. Don't double-map dma-buf imported BOs. Add kerneldoc about needing MMU eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup to mmap time. Use drm_dev_init instead of _alloc. Use ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage, since we don't modeset. Switch page tables back to WC (debug change to coherent had slipped in). Switch drm_gem_object_unreference_unlocked() to drm_gem_object_put_unlocked(). Simplify overflow mem handling by not sharing overflow mem between jobs. v3: no changes v4: align submit_cl to 64 bits (review by airlied), check zero flags in other ioctls. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4) Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change) Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
2018-04-25drm/todo: Fallout from v3d reviewDaniel Vetter1-0/+18
Bunch of ideas from Eric and me on what we could do to make gem gpu rendering drivers a notch simpler to type. v2: Fix typo (Eric). Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180425111742.5872-1-daniel.vetter@ffwll.ch
2018-04-18drm/xen-front: Remove CMA supportOleksandr Andrushchenko1-12/+0
It turns out this was only needed to paper over a bug in the CMA helpers, which was addressed in commit 998fb1a0f478b83492220ff79583bf9ad538bdd8 Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Fri Nov 10 13:33:10 2017 +0000 drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1 Without this the following pipeline didn't work: domU: 1. xen-front allocates a non-contig buffer 2. creates grants out of it dom0: 3. converts the grants into a dma-buf. Since they're non-contig, the scatter-list is huge. 4. imports it into rcar-du, which requires dma-contig memory for scanout. -> On this given platform there's an IOMMU, so in theory this should work. But in practice this failed, because of the huge number of sg entries, even though the IOMMU driver mapped it all into a dma-contig range. With a guest-contig buffer allocated in step 1, this problem doesn't exist. But there's technically no reason to require guest-contig memory for xen buffer sharing using grants. Given all that, the xen-front cma support is not needed and should be removed. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180417074012.21311-1-andr2000@gmail.com
2018-04-16drm/docs: Remove the rcar alpha from the csv fileMaxime Ripard1-1/+0
Now that we moved the rcar-du DRM driver has been switched to the generic alpha property, remove the former property documentation from the deprecated CSV file. Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/04be5e2256aa8d33d9521a68a10f0b73a24f8040.1523432341.git-series.maxime.ripard@bootlin.com
2018-04-11drm/i915: Move a bunch of workaround-related code to its own fileOscar Mateo1-0/+6
This has grown to be a sizable amount of code, so move it to its own file before we try to refactor anything. For the moment, we are leaving behind the WA BB code and the WAs that get applied (incorrectly) in init_clock_gating, but we will deal with it later. v2: Use intel_ prefix for code that deals with the hardware (Chris) v3: Rebased v4: - Rebased - New license header v5: - Rebased - Added some organisational notes to the file (Chris) v6: Include DOC section in the documentation build (Jani) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [ickle: appease checkpatch, mostly] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-1-git-send-email-oscar.mateo@intel.com
2018-04-06drm/i915: Add link to documentation in i915_gem_execbuffer.cKevin Rogovin1-0/+6
Add the documentation of "DOC: User command execution" of i915_gem_execbuffer.c into a new section in i915.rst. Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [Joonas: correcting the patch title] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-3-git-send-email-kevin.rogovin@intel.com
2018-04-06drm/i915: Narration overview on GEMKevin Rogovin1-23/+97
Add a narration to i915.rst about Intel GEN GPU's: engines, driver context and relocation. Also do minor reorder to improve narration. v5: More type fixes. Flow bullet list so lines are not too long. Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> [Joonas: correcting the patch title] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523001957-6427-2-git-send-email-kevin.rogovin@intel.com
2018-04-03drm/xen-front: Add support for Xen PV display frontendOleksandr Andrushchenko2-0/+44
Add support for Xen para-virtualized frontend display driver. Accompanying backend [1] is implemented as a user-space application and its helper library [2], capable of running as a Weston client or DRM master. Configuration of both backend and frontend is done via Xen guest domain configuration options [3]. Driver limitations: 1. Only primary plane without additional properties is supported. 2. Only one video mode supported which resolution is configured via XenStore. 3. All CRTCs operate at fixed frequency of 60Hz. 1. Implement Xen bus state machine for the frontend driver according to the state diagram and recovery flow from display para-virtualized protocol: xen/interface/io/displif.h. 2. Read configuration values from Xen store according to xen/interface/io/displif.h protocol: - read connector(s) configuration - read buffer allocation mode (backend/frontend) 3. Handle Xen event channels: - create for all configured connectors and publish corresponding ring references and event channels in Xen store, so backend can connect - implement event channels interrupt handlers - create and destroy event channels with respect to Xen bus state 4. Implement shared buffer handling according to the para-virtualized display device protocol at xen/interface/io/displif.h: - handle page directories according to displif protocol: - allocate and share page directories - grant references to the required set of pages for the page directory - allocate xen balllooned pages via Xen balloon driver with alloc_xenballooned_pages/free_xenballooned_pages - grant references to the required set of pages for the shared buffer itself - implement pages map/unmap for the buffers allocated by the backend (gnttab_map_refs/gnttab_unmap_refs) 5. Implement kernel modesetiing/connector handling using DRM simple KMS helper pipeline: - implement KMS part of the driver with the help of DRM simple pipepline helper which is possible due to the fact that the para-virtualized driver only supports a single (primary) plane: - initialize connectors according to XenStore configuration - handle frame done events from the backend - create and destroy frame buffers and propagate those to the backend - propagate set/reset mode configuration to the backend on display enable/disable callbacks - send page flip request to the backend and implement logic for reporting backend IO errors on prepare fb callback - implement virtual connector handling: - support only pixel formats suitable for single plane modes - make sure the connector is always connected - support a single video mode as per para-virtualized driver configuration 6. Implement GEM handling depending on driver mode of operation: depending on the requirements for the para-virtualized environment, namely requirements dictated by the accompanying DRM/(v)GPU drivers running in both host and guest environments, number of operating modes of para-virtualized display driver are supported: - display buffers can be allocated by either frontend driver or backend - display buffers can be allocated to be contiguous in memory or not Note! Frontend driver itself has no dependency on contiguous memory for its operation. 6.1. Buffers allocated by the frontend driver. The below modes of operation are configured at compile-time via frontend driver's kernel configuration. 6.1.1. Front driver configured to use GEM CMA helpers This use-case is useful when used with accompanying DRM/vGPU driver in guest domain which was designed to only work with contiguous buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can only import contiguous PRIME buffers, thus requiring frontend driver to provide such. In order to implement this mode of operation para-virtualized frontend driver can be configured to use GEM CMA helpers. 6.1.2. Front driver doesn't use GEM CMA If accompanying drivers can cope with non-contiguous memory then, to lower pressure on CMA subsystem of the kernel, driver can allocate buffers from system memory. Note! If used with accompanying DRM/(v)GPU drivers this mode of operation may require IOMMU support on the platform, so accompanying DRM/vGPU hardware can still reach display buffer memory while importing PRIME buffers from the frontend driver. 6.2. Buffers allocated by the backend This mode of operation is run-time configured via guest domain configuration through XenStore entries. For systems which do not provide IOMMU support, but having specific requirements for display buffers it is possible to allocate such buffers at backend side and share those with the frontend. For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting physically contiguous memory, this allows implementing zero-copying use-cases. Note, while using this scenario the following should be considered: a) If guest domain dies then pages/grants received from the backend cannot be claimed back b) Misbehaving guest may send too many requests to the backend exhausting its grant references and memory (consider this from security POV). Note! Configuration options 1.1 (contiguous display buffers) and 2 (backend allocated buffers) are not supported at the same time. 7. Handle communication with the backend: - send requests and wait for the responses according to the displif protocol - serialize access to the communication channel - time-out used for backend communication is set to 3000 ms - manage display buffers shared with the backend [1] https://github.com/xen-troops/displ_be [2] https://github.com/xen-troops/libxenbe [3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257 Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
2018-03-30Merge airlied/drm-next into drm-intel-next-queuedRodrigo Vivi4-9/+26
Commit 'aee3bac0a3a8 ("drm/i915/psr: Tie PSR2 support to Y coordinate requirement")' got merged to drm-intel-next-queued but the variable was defined commit 'c5fe47327b06 ("drm: Add PSR version 3 macro") who was merged through drm-misc. So backmerging to get drm-intel-next-queued compiling back again. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-28drm/i915: Use correct reST syntax for WOPCM and GuC kernel-doc diagramsYaodong Li1-0/+15
GuC Address Space and WOPCM Layout diagrams won't be generated correctly by sphinx build if not using proper reST syntax. This patch uses reST literal blocks to make sure GuC Address Space and WOPCM Layout diagrams to be generated correctly, and it also corrects some errors in the diagram description. v2: - Fixed errors in diagram description v3: - Updated GuC Address Space kernel-doc based on Michal's suggestion v4: - Added WOPCM layout and GuC address space docs into i915.rst (Joonas) Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1521763162-11424-1-git-send-email-yaodong.li@intel.com
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie1-1/+1
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-21Merge airlied/drm-next into drm-misc-nextSean Paul1-0/+7
Refresh -misc-next Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-03-19drm/doc: Put all driver docs into a separate chapterDaniel Vetter2-8/+22
We have quite a few driver docs now, which is great, but having them all in the top-level gpu documentation chapter makes it harder to spot the core/shared bits. Stuff them into a separate chapter and ecourage people to add even more! Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316075926.13584-1-daniel.vetter@ffwll.ch
2018-03-16drm: Verify gamma/degamma LUT sizeVille Syrjälä1-0/+3
While we want to potentially support multiple different gamma/degamma LUT sizes we can (and should) at least check that the blob length is a multiple of the LUT entry size. v2: s/expected_size_mod/expected_elem_size/ (Daniel) Add kernel doc (Daniel) v3: s/we/were/ typo in the docs Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180315152241.7113-1-ville.syrjala@linux.intel.com
2018-03-01Merge drm-next into drm-intel-next-queued (this time for real)Joonas Lahtinen3-3/+13
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-22Merge tag 'drm-misc-fixes-2018-02-21' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few drivers, a memory leak on non-blocking commits, a crash on color-eviction. The is also meson and edid fixes, plus a fix for a doc warning. * tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: drm/tve200: fix kernel-doc documentation comment include drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker workqueue: Allow retrieval of current task's work struct drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
2018-02-21drm/todo: i915 could use device_link_addDaniel Vetter1-0/+7
Noticed while reading some unrelated patches. Unfortunately Imre's patch to add our early/late hooks predated the device_link infrastructure by 2 years. Cc: Imre Deak <imre.deak@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220132017.30719-1-daniel.vetter@ffwll.ch
2018-02-21drm/tve200: fix kernel-doc documentation comment includeJani Nikula1-1/+1
The DOC: line acts as an identifier for the :doc: include. Fixes: ./drivers/gpu/drm/tve200/tve200_drv.c:1: warning: no structured comments found Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220142008.9330-1-jani.nikula@intel.com
2018-02-20drm/docs: Document "scaling mode" property betterDaniel Vetter1-1/+0
Move it out of the csv dungeon. While at it add the missing link to the helper functions for setting up the "panel rotation" property. Also OCD how we list enum property values and their corresponding docs. Going for a nest definition list seams cleanest, no need for also making it an uordered list. Cc: Sean Paul <seanpaul@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-3-daniel.vetter@ffwll.ch
2018-02-20drm/docs: Discourage adding more to kms-properties.csvDaniel Vetter1-2/+3
Motivated by patch review. The table is really hard to read in source form, hard to edit, and we've moved away to more focused sections about specific features and how they're exposed in properties. Those sections can then more easily enumerate options, link to helper functions and other parts of the docs. All things that get ugly real fast in the docs. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-1-daniel.vetter@ffwll.ch
2018-02-19drm/todo: Add idr_init_base todoDaniel Vetter1-0/+10
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219145708.23523-1-daniel.vetter@ffwll.ch
2018-01-02docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.cMarkus Heiser1-3/+0
With commit d9e2e0143c the 'GuC-specific firmware loader' doc section was removed from intel_guc_loader.c without a replacement. So lets remove it from the Kernel-doc:: .. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c :doc: GuC-specific firmware loader With commit e8668bbcb0 intel_guc_loader.c was renamed to to intel_guc_fw.c and to name just one, intel_guc_init_hw() was renamed to intel_guc_fw_upload(). Since we get errors in the Sphinx build like: - Error: Cannot open file ./drivers/gpu/drm/i915/intel_guc_loader.c Change the kernel-doc directive from intel_guc_loader.c to intel_guc_fw.c Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> [danvet: Rebase onto the partial fix 006c23327f8d ("documentation/gpu/i915: fix docs build error after file rename")] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1513078717-12373-1-git-send-email-markus.heiser@darmarit.de (cherry picked from commit 0132a1a5d44d2cd32a249dbe999a88c2134a6bd1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-02documentation/gpu/i915: fix docs build error after file renameRandy Dunlap1-2/+2
Fix documentation build errors after intel_guc_loader.c was renamed to intel_guc_fw.c. Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function GuC-specific firmware loader ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 1 Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -internal ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 2 Fixes: e8668bbcb0f9 ("drm/i915/guc: Rename intel_guc_loader.c to intel_guc_fw.c") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1b214f53-47f5-bef3-f58e-8136de5678ed@infradead.org (cherry picked from commit 006c23327f8de8575508c458131b304188d426f7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-12-22Merge tag 'drm-misc-next-2017-12-21' of ↵Dave Airlie3-22/+46
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.16: Core Changes: - mostly doc updates and some fbdev improvements * tag 'drm-misc-next-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc: drm/framebuffer: Print task that allocated the fb in debug info. drm/fb-helper: Add drm_fb_helper_defio_init() drm/fb-helper: Update DOC with new helpers drm/docs: Add todo entry for drm_fb_helper_fbdev_setup() drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown() drm/fb-helper: Set/clear dev->fb_helper in dummy init/fini drm/stm: ltdc: Remove unnecessary platform_get_resource() error check drm/stm: dsi: Remove unnecessary platform_get_resource() error check drm/doc: Move legacy kms helpers to the very end drm/atomic: document how to handle driver private objects drm/syncobj: some kerneldoc polish drm/print: Unconfuse kerneldoc drm/edid: kerneldoc for is_hdmi2_sink
2017-12-21Merge tag 'drm-intel-next-2017-12-14' of ↵Dave Airlie1-4/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix documentation build issues (Randy, Markus) - Fix timestamp frequency calculation for perf on CNL (Lionel) - New DMC firmware for Skylake (Anusha) - GTT flush fixes and other GGTT write track and refactors (Chris) - Taint kernel when GPU reset fails (Chris) - Display workarounds organization (Lucas) - GuC and HuC initialization clean-up and fixes (Michal) - Other fixes around GuC submission (Michal) - Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\ s) - Many other improvements on our logs and dumps (Chris) - Restore GT performance in headless mode with DMC loaded (Tvrtko) - Stop updating legacy fb parameters since FBC is not using anymore (Daniel) - More selftest improvements (Chris) - Preemption fixes and improvements (Chris) - x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew) - Other improvements on Stolen Memory code to be resource centric. (Matthew) - Improvements and fixes on fence allocation/release (Chris). GVT: - fixes for two coverity scan errors (Colin) - mmio switch code refine (Changbin) - more virtual display dmabuf fixes (Tina/Gustavo) - misc cleanups (Pei) - VFIO mdev display dmabuf interface and gvt support (Tina) - VFIO mdev opregion support/fixes (Tina/Xiong/Chris) - workload scheduling optimization (Changbin) - preemption fix and temporal workaround (Zhenyu) - and misc fixes after refactor (Chris) * tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits) drm/i915: Update DRIVER_DATE to 20171214 drm/i915: properly init lockdep class drm/i915: Show engine state when hangcheck detects a stall drm/i915: make CS frequency read support missing more obvious drm/i915/guc: Extract doorbell verification into a function drm/i915/guc: Extract clients allocation to submission_init drm/i915/guc: Extract doorbell creation from client allocation drm/i915/guc: Call invalidate after changing the vfunc drm/i915/guc: Extract guc_init from guc_init_hw drm/i915/guc: Move GuC workqueue allocations outside of the mutex drm/i915/guc: Move shared data allocation away from submission path drm/i915: Unwind i915_gem_init() failure drm/i915: Ratelimit request allocation under oom drm/i915: Allow fence allocations to fail drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep drm/i915: Don't check #active_requests from i915_gem_wait_for_idle() drm/i915/fence: Use rcu to defer freeing of irq_work drm/i915: Dump the engine state before declaring wedged from wait_for_engines() drm/i915: Bump timeout for wait_for_engines() drm/i915: Downgrade misleading "Memory usable" message ...
2017-12-20drm/docs: Add todo entry for drm_fb_helper_fbdev_setup()Noralf Trønnes1-0/+18
Add entry for conversion of drivers to new helpers. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-4-noralf@tronnes.org
2017-12-15drm/doc: Move legacy kms helpers to the very endDaniel Vetter2-22/+22
We don't want people to accidentally stumble over there. Also rename the plane helpers to legacy plane helpers. After Ville's patch to make the clipping helper atomic and move it to drm_atomic_helper.c there's nothing left in there that should be useful for modern drivers. v2: Laurent had a few questions around how state is added to drm_atomic_state, tried to clarify that. And spotted another sentence where the docs suggested subclassing. v3: Small polish (Alex). Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-6-daniel.vetter@ffwll.ch
2017-12-15drm/atomic: document how to handle driver private objectsDaniel Vetter1-0/+6
DK put some nice docs into the commit introducing driver private state, but in the git history alone it'll be lost. Also, since Ville remove the void* usage it's a good opportunity to give the driver private stuff some tlc on the doc front. Finally try to explain why the "let's just subclass drm_atomic_state" approach wasn't the greatest, and annotate all those functions as deprecated in favour of more standardized driver private states. Also note where we could/should extend driver private states going forward (atm neither locking nor synchronization is handled in core/helpers, which isn't really all that great). v2: Spelling and phrasing improvements (Alex, DK). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
2017-12-12docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.cMarkus Heiser1-3/+0
With commit d9e2e0143c the 'GuC-specific firmware loader' doc section was removed from intel_guc_loader.c without a replacement. So lets remove it from the Kernel-doc:: .. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c :doc: GuC-specific firmware loader With commit e8668bbcb0 intel_guc_loader.c was renamed to to intel_guc_fw.c and to name just one, intel_guc_init_hw() was renamed to intel_guc_fw_upload(). Since we get errors in the Sphinx build like: - Error: Cannot open file ./drivers/gpu/drm/i915/intel_guc_loader.c Change the kernel-doc directive from intel_guc_loader.c to intel_guc_fw.c Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> [danvet: Rebase onto the partial fix 006c23327f8d ("documentation/gpu/i915: fix docs build error after file rename")] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1513078717-12373-1-git-send-email-markus.heiser@darmarit.de
2017-12-10drm/tinydrm: Use drm_fb_cma_fbdev_init_with_funcs/fini()Noralf Trønnes1-5/+0
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Remove todo entry. Cc: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: David Lechner <david@lechnolgy.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org
2017-12-08Merge airlied/drm-next into drm-intel-next-queuedRodrigo Vivi2-5/+26
Chris requested this backmerge for a reconciliation on drm_print.h between drm-misc-next and drm-intel-next-queued Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-12-04drm: Add panel orientation quirks, v6.Hans de Goede1-0/+3
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-12-04Merge arlied/drm-next into drm-misc-nextGustavo Padovan2-2/+12
We need to pull 66660d4cf21b (drm: add connector info/property for non-desktop displays [v2]) into drm-misc-next to continue the development of the display rotation series. Effectively this also pulls 4.15-r2 into drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2017-12-04documentation/gpu/i915: fix docs build error after file renameRandy Dunlap1-2/+2
Fix documentation build errors after intel_guc_loader.c was renamed to intel_guc_fw.c. Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function GuC-specific firmware loader ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 1 Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c Error: Cannot open file ../drivers/gpu/drm/i915/intel_guc_loader.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -internal ../drivers/gpu/drm/i915/intel_guc_loader.c' failed with return code 2 Fixes: e8668bbcb0f9 ("drm/i915/guc: Rename intel_guc_loader.c to intel_guc_fw.c") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1b214f53-47f5-bef3-f58e-8136de5678ed@infradead.org
2017-12-04Merge tag 'drm-intel-next-2017-11-17-1' of ↵Dave Airlie1-2/+2
git://anongit.freedesktop.org/drm/drm-intel into drm-next More change sets for 4.16: - Many improvements for selftests and other igt tests (Chris) - Forcewake with PUNIT->PMIC bus fixes and robustness (Hans) - Define an engine class for uABI (Tvrtko) - Context switch fixes and improvements (Chris) - GT powersavings and power gating simplification and fixes (Chris) - Other general driver clean-ups (Chris, Lucas, Ville) - Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna) - IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten) - OA perf fixes and support to Coffee Lake and Cannonlake (Lionel) - Fixes around GPU fault registers (Michel) - GEM Proxy (Tina) - Refactor of Geminilake and Cannonlake plane color handling (James) - Generalize transcoder loop (Mika Kahola) - New HW Workaround for Cannonlake and Geminilake (Rodrigo) - Resume GuC before using GEM (Chris) - Stolen Memory handling improvements (Ville) - Initialize entry in PPAT for older compilers (Chris) - Other fixes and robustness improvements on execbuf (Chris) - Improve logs of GEM_BUG_ON (Mika Kuoppala) - Rework with massive rename of GuC functions and files (Sagar) - Don't sanitize frame start delay if pipe is off (Ville) - Cannonlake clock fixes (Rodrigo) - Cannonlake HDMI 2.0 support (Rodrigo) - Add a GuC doorbells selftest (Michel) - Add might_sleep() check to our wait_for() (Chris) Many GVT changes for 4.16: - CSB HWSP update support (Weinan) - GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo) - full virtualized opregion (Xiaolin) - VM health check for sane fallback (Fred) - workload submission code refactor for future enabling (Zhi) - Updated repo URL in MAINTAINERS (Zhenyu) - other many misc fixes * tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel: (260 commits) drm/i915: Update DRIVER_DATE to 20171117 drm/i915: Add a policy note for removing workarounds drm/i915/selftests: Report ENOMEM clearly for an allocation failure Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk" drm/i915: Calculate g4x intermediate watermarks correctly drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3. drm/i915: Pass crtc_state to ips toggle functions, v2 drm/i915: Pass idle crtc_state to intel_dp_sink_crc drm/i915: Enable FIFO underrun reporting after initial fastset, v4. drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM drm/i915: Add might_sleep() check to wait_for() drm/i915/selftests: Add a GuC doorbells selftest drm/i915/cnl: Extend HDMI 2.0 support to CNL. drm/i915/cnl: Simplify dco_fraction calculation. drm/i915/cnl: Don't blindly replace qdiv. drm/i915/cnl: Fix wrpll math for higher freqs. drm/i915/cnl: Fix, simplify and unify wrpll variable sizes. drm/i915/cnl: Remove useless conversion. drm/i915/cnl: Remove spurious central_freq. drm/i915/selftests: exercise_ggtt may have nothing to do ...
2017-12-04Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie1-0/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-11-30drm/docs: Add todo entry for simple modeset suspend/resumeNoralf Trønnes1-0/+9
Add entry for conversion of drivers to new helpers. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-7-noralf@tronnes.org
2017-11-30drm/tinydrm: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes1-5/+0
Replace driver's code with the generic helpers that do the same thing. Remove todo entry. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-6-noralf@tronnes.org
2017-11-17Merge tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+10
Pull amdgpu DC display code for Vega from Dave Airlie: "This is the pull request for the AMD DC (display code) layer which is a requirement to program the display engines on the new Vega and Raven based GPUs. It also contains support for all amdgpu supported GPUs (CIK, VI, Polaris), which has to be enabled. It is also a kms atomic modesetting compatible driver (unlike the current in-tree display code). I've kept it separate from drm-next because it may have some things that cause you to reject it. Background story: AMD have an internal team creating a shared OS codebase for display at hw bring up time using information from their hardware teams. This process doesn't lead to the most Linux friendly/looking code but we have worked together on cleaning a lot of it up and dealing with sparse/smatch/checkpatch, and having their team internally adhere to Linux coding standards. This tree is a complete history rebased since they started opening it, we decided not to squash it down as the history may have some value. Some of the commits therefore might not reach kernel standards, and we are steadily training people in AMD to better write commit msgs. There is a major bunch of generated bandwidth calculation and verification code that comes from their hardware team. On Vega and before this is float calculations, on Raven (DCN10) this is double based. They do the required things to do FP in the kernel, and I could understand this might raise some issues. Rewriting the bandwidth would be a major undertaken in reverification, it's non-trivial to work out if a display can handle the complete set of mode information thrown at it. Future story: There is a TODO list with this, and it address most of the remaining things that would be nice to refine/remove. The DCN10 code is still under development internally and they push out a lot of patches quite regularly and are supporting this code base with their display team. I think we've reached the point where keeping it out of tree is going to motivate distributions to start carrying the code, so I'd prefer we get it in tree. I think this code is slightly better than STAGING quality but not massively so, I'd really like to see that float/double magic gone and fixed point used, but AMD don't seem to think the accuracy and revalidation of the code is worth the effort" * tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux: (1110 commits) drm/amd/display: fix MST link training fail division by 0 drm/amd/display: Fix formatting for null pointer dereference fix drm/amd/display: Remove dangling planes on dc commit state drm/amd/display: add flip_immediate to commit update for stream drm/amd/display: Miss register MST encoder cbs drm/amd/display: Fix warnings on S3 resume drm/amd/display: use num_timing_generator instead of pipe_count drm/amd/display: use configurable FBC option in dm drm/amd/display: fix AZ clock not enabled before program AZ endpoint amdgpu/dm: Don't use DRM_ERROR in amdgpu_dm_atomic_check amd/display: Fix potential null dereference in dce_calcs.c amdgpu/dm: Remove unused forward declaration drm/amdgpu: Remove unused dc_stream from amdgpu_crtc amdgpu/dc: Fix double unlock in amdgpu_dm_commit_planes amdgpu/dc: Fix missing null checks in amdgpu_dm.c amdgpu/dc: Fix potential null dereferences in amdgpu_dm.c amdgpu/dc: fix more indentation warnings amdgpu/dc: handle allocation failures in dc_commit_planes_to_stream. amdgpu/dc: fix indentation warning from smatch. amdgpu/dc: fix non-ansi function decls. ...
2017-11-16drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|hSagar Arun Kamble1-2/+2
With all component structures and functions named appropriately, change the names of GuC submission source files. There were bunch of style issues in guc_submission.c that are highlighted now by checkpatch. Fix those. Update name in Documentation/gpu. (Joonas) v2: Rebase. v3: Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-31drm/TODO: Clarify DRM_DEV_* conversionDaniel Vetter1-0/+4
Not everyone agrees this is the best thing, so make it really clear that maintainers need to be asked first, then the conversion. We've had a few newbies that did this the other way round, got their patches rejected, which isn't the best newbie experience. Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171030131536.11654-1-daniel.vetter@ffwll.ch
2017-10-18drm: some KMS todo ideasDaniel Vetter1-0/+12
Inspired by discussions with Keith and Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Keith Packard <keithp@keithp.com> Acked-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017162918.8380-1-daniel.vetter@ffwll.ch
2017-10-09Merge branch 'drm-next-4.15-dc' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-0/+10
into drm-next Initial pull request for DC support. We've completed a substantial amount of the cleanup and restructuring in our TODO. There are a few additional cleanups that we are continuing to work on, but I don't think there are any showstoppers remaining. We've tried to maintain most of the history for bisect purposes. Harry made sure all the commits build. We've enabled DC for vega10 and Raven. Pre-vega10 parts can be enabled via module parameter (amdgpu.dc=1), but are not enabled by default at this point until we get further testing upstream. This code provides atomic modesetting support for DCE8 (CIK), DCE10 (Tonga, Fiji), DCE11 (CZ, ST, Polaris), DCE12 (vega10), and DCN1 (RV) including HDMI and DP audio, DP MST, and many other advanced display features. + Latest cleanups for DC from you and Harry. Note that there is some flickering on some older asics with this branch due to a regression in powerplay that has already been fixed and will be included in my next non-DC pull request next week. * 'drm-next-4.15-dc' of git://people.freedesktop.org/~agd5f/linux: (897 commits) amdgpu/dc: use kref for dc_state. amdgpu/dc: convert dc_sink to kref. amdgpu/dc: convert dc_stream_state to kref. amdgpu/dc: use kref for dc_plane_state. amdgpu/dc: convert dc_gamma to kref reference counting. amdgpu/dc: convert dc_transfer to use a kref. amdgpu/dc: kill a bunch of dead code. amdgpu/dc: set a bunch of functions to static. amdgpu/dc: kill some deadcode in dc core. amdgpu/dc: fix indentation on a couple of returns. amdgpu/dm: don't use after free. amdgpu/dc: kfree already checks for NULL. amdgpu/dc: fix a bunch of misc whitespace. amdgpu/dc: drop hw_sequencer_types.h amdgpu/dc: drop dce110_types.h amdgpu/dc: use kernel ilog2 for log_2. amdgpu/dc: don't memset after kzalloc. amdgpu/dc: inline dal grph object id functions. amdgpu/dc: inline dml_round_to_multiple amdgpu/dc: rename bios get_image symbol to something more searchable. ...
2017-10-03Merge airlied/drm-next into drm-misc-nextDaniel Vetter1-1/+17
Just catching up with upstream. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-09-28drm/doc: Reference AMD DC todosHarry Wentland1-0/+10
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-28Merge tag 'drm-misc-next-2017-09-20' of ↵Dave Airlie4-11/+77
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...
2017-09-27drm/Documentation: Refine TODO for backlight helpers in tinydrmMeghana Madhyastha1-1/+10
Add a summary which resulted from discussions on what should be done to refactor backlight helpers in tinydrm so that they can be used in other drivers as well. Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170927105116.GA30391@meghana-HP-Pavilion-Notebook
2017-09-27drm/doc: Remove todo item about "This is gross" commentHaneen Mohammed1-6/+0
This patch remove the todo item "Use new IDR deletion interface to clean up drm_gem_handle_delete()" after it has been resolved with the commit "drm: Remove obsolete "This is gross" comment". Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170926210835.GA4622@Haneen