summaryrefslogtreecommitdiffstats
path: root/Documentation/dontdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-25kbuild: generate Module.symvers only when vmlinux existsMasahiro Yamada1-0/+1
The external module build shows the following warning if Module.symvers is missing in the kernel tree. WARNING: Symbol version dump "Module.symvers" is missing. Modules may not have dependencies or modversions. I think this is an important heads-up because the resulting modules may not work as expected. This happens when you did not build the entire kernel tree, for example, you might have prepared the minimal setups for external modules by 'make defconfig && make modules_preapre'. A problem is that 'make modules' creates Module.symvers even without vmlinux. In this case, that warning is suppressed since Module.symvers already exists in spite of its incomplete content. The incomplete (i.e. invalid) Module.symvers should not be created. This commit changes the second pass of modpost to dump symbols into modules-only.symvers. The final Module.symvers is created by concatenating vmlinux.symvers and modules-only.symvers if both exist. Module.symvers is supposed to collect symbols from both vmlinux and modules. It might be a bit confusing, and I am not quite sure if it is an official interface, but presumably it is difficult to rename it because some tools (e.g. kmod) parse it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25kbuild: add CONFIG_VMLINUX_MAP expert optionRasmus Villemoes1-0/+1
It can be quite useful to have ld emit a link map file, in order to debug or verify that special sections end up where they are supposed to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid of. The only reason I'm not just adding this unconditionally is that the .map file can be rather large (several MB), and that's a waste of space when one isn't interested in these things. Also make it depend on CONFIG_EXPERT. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-31Documentation: dontdiff: Add zstd compressed filesNick Terrell1-0/+1
For now, that's arch/x86/boot/compressed/vmlinux.bin.zst but probably more will come, thus let's be consistent with all other compressors. Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200730190841.2071656-9-nickrterrell@gmail.com
2020-06-06modpost: generate vmlinux.symvers and reuse it for the second modpostMasahiro Yamada1-0/+1
The full build runs modpost twice, first for vmlinux.o and second for modules. The first pass dumps all the vmlinux symbols into Module.symvers, but the second pass parses vmlinux again instead of reusing the dump file, presumably because it needs to avoid accumulating stale symbols. Loading symbol info from a dump file is faster than parsing an ELF object. Besides, modpost deals with various issues to parse vmlinux in the second pass. A solution is to make the first pass dumps symbols into a separate file, vmlinux.symvers. The second pass reads it, and parses module .o files. The merged symbol information is dumped into Module.symvers in the same way as before. This makes further modpost cleanups possible. Also, it fixes the problem of 'make vmlinux', which previously overwrote Module.symvers, throwing away module symbols. I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked when you cross this commit. Otherwise, vmlinux.symvers would not be generated. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-11-11modpost: dump missing namespaces into a single modules.nsdeps fileMasahiro Yamada1-0/+1
The modpost, with the -d option given, generates per-module .ns_deps files. Kbuild generates per-module .mod files to carry module information. This is convenient because Make handles multiple jobs in parallel when the -j option is given. On the other hand, the modpost always runs as a single thread. I do not see a strong reason to produce separate .ns_deps files. This commit changes the modpost to generate just one file, modules.nsdeps, each line of which has the following format: <module_name>: <list of missing namespaces> Please note it contains *missing* namespaces instead of required ones. So, modules.nsdeps is empty if the namespace dependency is all good. This will work more efficiently because spatch will no longer process already imported namespaces. I removed the '(if needed)' from the nsdeps log since spatch is invoked only when needed. This also solves the stale .ns_deps problem reported by Jessica Yu: https://lkml.org/lkml/2019/10/28/467 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
2019-07-18kbuild: create *.mod with full directory path and remove MODVERDIRMasahiro Yamada1-0/+1
While descending directories, Kbuild produces objects for modules, but do not link final *.ko files; it is done in the modpost. To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR) for every module it is building. Some post-processing steps read the necessary information from *.mod files. This avoids descending into directories again. This mechanism was introduced in 2003 or so. Later, commit 551559e13af1 ("kbuild: implement modules.order") added modules.order. So, we can simply read it out to know all the modules with directory paths. This is easier than parsing the first line of *.mod files. $(MODVERDIR) has a flat directory structure, that is, *.mod files are named only with base names. This is based on the assumption that the module name is unique across the tree. This assumption is really fragile. Stephen Rothwell reported a race condition caused by a module name conflict: https://lkml.org/lkml/2019/5/13/991 In parallel building, two different threads could write to the same $(MODVERDIR)/*.mod simultaneously. Non-unique module names are the source of all kind of troubles, hence commit 3a48a91901c5 ("kbuild: check uniqueness of module names") introduced a new checker script. However, it is still fragile in the build system point of view because this race happens before scripts/modules-check.sh is invoked. If it happens again, the modpost will emit unclear error messages. To fix this issue completely, create *.mod with full directory path so that two threads never attempt to write to the same file. $(MODVERDIR) is no longer needed. Since modules with directory paths are listed in modules.order, Kbuild is still able to find *.mod files without additional descending. I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y, it occurs not only in the modpost stage, but also during directory descending, where sumversion.c may parse stale *.mod files. It would emit 'No such file or directory' warning when an object consisting a module is renamed, or when a single-obj module is turned into a multi-obj module or vice versa. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-05-08Merge tag 'docs-5.2' of git://git.lwn.net/linuxLinus Torvalds1-4/+4
Pull documentation updates from Jonathan Corbet: "A reasonably busy cycle for docs, including: - Lots of work on the Chinese and Italian translations - Some license-rules clarifications from Christoph - Various build-script fixes - A new document on memory models - RST conversion of the live-patching docs - The usual collection of typo fixes and corrections" * tag 'docs-5.2' of git://git.lwn.net/linux: (140 commits) docs/livepatch: Unify style of livepatch documentation in the ReST format docs: livepatch: convert docs to ReST and rename to *.rst scripts/documentation-file-ref-check: detect broken :doc:`foo` scripts/documentation-file-ref-check: don't parse Next/ dir LICENSES: Rename other to deprecated LICENSES: Clearly mark dual license only licenses docs: Don't reference the ZLib license in license-rules.rst docs/vm: Minor editorial changes in the THP and hugetlbfs docs/vm: add documentation of memory models doc:it_IT: translation alignment doc: fix typo in PGP guide dontdiff: update with Kconfig build artifacts docs/zh_CN: fix typos in 1.Intro.rst file docs/zh_CN: redirect CoC docs to Chinese version doc: mm: migration doesn't use FOLL_SPLIT anymore docs: doc-guide: remove the extension from .rst files doc: kselftest: Fix KBUILD_OUTPUT usage instructions docs: trace: fix some Sphinx warnings docs: speculation.txt: mark example blocks as such docs: ntb.txt: add blank lines to clean up some Sphinx warnings ...
2019-05-08Merge tag 'kbuild-v5.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - allow users to invoke 'make' out of the source tree - refactor scripts/mkmakefile - deprecate KBUILD_SRC, which was used to track the source tree location for O= build. - fix recordmcount.pl in case objdump output is localized - turn unresolved symbols in external modules to errors from warnings by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings - generate modules.builtin.modinfo to collect .modinfo data from built-in modules - misc Makefile cleanups * tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) .gitignore: add more all*.config patterns moduleparam: Save information about built-in modules in separate file Remove MODULE_ALIAS() calls that take undefined macro .gitignore: add leading and trailing slashes to generated directories scripts/tags.sh: fix direct execution of scripts/tags.sh scripts: override locale from environment when running recordmcount.pl samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option kbuild: move Documentation to vmlinux-alldirs kbuild: move samples/ to KBUILD_VMLINUX_OBJS modpost: make KBUILD_MODPOST_WARN also configurable for external modules kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build kbuild: remove unneeded dependency for include/config/kernel.release memory: squash drivers/memory/Makefile.asm-offsets kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build kbuild: mkmakefile: generate a simple wrapper of top Makefile kbuild: mkmakefile: do not check the generated Makefile marker kbuild: allow Kbuild to start from any directory kbuild: pass $(MAKECMDGOALS) to sub-make as is kbuild: fix warning "overriding recipe for target 'Makefile'" ...
2019-05-07moduleparam: Save information about built-in modules in separate fileAlexey Gladkov1-0/+1
Problem: When a kernel module is compiled as a separate module, some important information about the kernel module is available via .modinfo section of the module. In contrast, when the kernel module is compiled into the kernel, that information is not available. Information about built-in modules is necessary in the following cases: 1. When it is necessary to find out what additional parameters can be passed to the kernel at boot time. 2. When you need to know which module names and their aliases are in the kernel. This is very useful for creating an initrd image. Proposal: The proposed patch does not remove .modinfo section with module information from the vmlinux at the build time and saves it into a separate file after kernel linking. So, the kernel does not increase in size and no additional information remains in it. Information is stored in the same format as in the separate modules (null-terminated string array). Because the .modinfo section is already exported with a separate modules, we are not creating a new API. It can be easily read in the userspace: $ tr '\0' '\n' < modules.builtin.modinfo ext4.softdep=pre: crc32c ext4.license=GPL ext4.description=Fourth Extended Filesystem ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others ext4.alias=fs-ext4 ext4.alias=ext3 ext4.alias=fs-ext3 ext4.alias=ext2 ext4.alias=fs-ext2 md_mod.alias=block-major-9-* md_mod.alias=md md_mod.description=MD RAID framework md_mod.license=GPL md_mod.parmtype=create_on_open:bool md_mod.parmtype=start_dirty_degraded:int ... Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-30dontdiff: update with Kconfig build artifactsMasahiro Yamada1-4/+4
Add generated *conf-cfg files. Commit 694c49a7c01c ("kconfig: drop localization support") removed "gconf.glade.h" and "kxgettext". "kconfig" and "lxdialog" should not be excluded either. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-04-28unicode: refactor the rule for regenerating utf8data.hMasahiro Yamada1-0/+2
scripts/mkutf8data is used only when regenerating utf8data.h, which never happens in the normal kernel build. However, it is irrespectively built if CONFIG_UNICODE is enabled. Moreover, there is no good reason for it to reside in the scripts/ directory since it is only used in fs/unicode/. Hence, move it from scripts/ to fs/unicode/. In some cases, we bypass build artifacts in the normal build. The conventional way to do so is to surround the code with ifdef REGENERATE_*. For example, - 7373f4f83c71 ("kbuild: add implicit rules for parser generation") - 6aaf49b495b4 ("crypto: arm,arm64 - Fix random regeneration of S_shipped") I rewrote the rule in a more kbuild'ish style. In the normal build, utf8data.h is just shipped from the check-in file. $ make [ snip ] SHIPPED fs/unicode/utf8data.h CC fs/unicode/utf8-norm.o CC fs/unicode/utf8-core.o CC fs/unicode/utf8-selftest.o AR fs/unicode/built-in.a If you want to generate utf8data.h based on UCD, put *.txt files into fs/unicode/, then pass REGENERATE_UTF8DATA=1 from the command line. The mkutf8data tool will be automatically compiled to generate the utf8data.h from the *.txt files. $ make REGENERATE_UTF8DATA=1 [ snip ] HOSTCC fs/unicode/mkutf8data GEN fs/unicode/utf8data.h CC fs/unicode/utf8-norm.o CC fs/unicode/utf8-core.o CC fs/unicode/utf8-selftest.o AR fs/unicode/built-in.a I renamed the check-in utf8data.h to utf8data.h_shipped so that this will work for the out-of-tree build. You can update it based on the latest UCD like this: $ make REGENERATE_UTF8DATA=1 fs/unicode/ $ cp fs/unicode/utf8data.h fs/unicode/utf8data.h_shipped Also, I added entries to .gitignore and dontdiff. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-07kernel/configs: use .incbin directive to embed config_data.gzMasahiro Yamada1-1/+0
This slightly optimizes the kernel/configs.c build. bin2c is not very efficient because it converts a data file into a huge array to embed it into a *.c file. Instead, we can use the .incbin directive. Also, this simplifies the code; Makefile is cleaner, and the way to get the offset/size of the config_data.gz is more straightforward. I used the "asm" statement in *.c instead of splitting it into *.S because MODULE_* tags are not supported in *.S files. I also cleaned up kernel/.gitignore; "config_data.gz" is unneeded because the top-level .gitignore takes care of the "*.gz" pattern. [yamada.masahiro@socionext.com: v2] Link: http://lkml.kernel.org/r/1550108893-21226-1-git-send-email-yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/1549941160-8084-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alexander Popov <alex.popov@linux.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-19Remove gperf usage from toolchainLinus Torvalds1-1/+0
It turns out that gperf-3.1 changed types in the generated code in ways that aren't even trivially detectable without having to generate a test-file. It's just not worth using tools and libraries from clowns that don't understand or care about compatibility. So get rid of gperf. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-05Merge tag 'gcc-plugins-v4.13-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull GCC plugin updates from Kees Cook: "The big part is the randstruct plugin infrastructure. This is the first of two expected pull requests for randstruct since there are dependencies in other trees that would be easier to merge once those have landed. Notably, the IPC allocation refactoring in -mm, and many trivial merge conflicts across several trees when applying the __randomize_layout annotation. As a result, it seemed like I should send this now since it is relatively self-contained, and once the rest of the trees have landed, send the annotation patches. I'm expecting the final phase of randstruct (automatic struct selection) will land for v4.14, but if its other tree dependencies actually make it for v4.13, I can send that merge request too. Summary: - typo fix in Kconfig (Jean Delvare) - randstruct infrastructure" * tag 'gcc-plugins-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ARM: Prepare for randomized task_struct randstruct: Whitelist NIU struct page overloading randstruct: Whitelist big_key path struct overloading randstruct: Whitelist UNIXCB cast randstruct: Whitelist struct security_hook_heads cast gcc-plugins: Add the randstruct plugin Fix English in description of GCC_PLUGIN_STRUCTLEAK compiler: Add __designated_init annotation gcc-plugins: Detail c-common.h location for GCC 4.6
2017-06-23Docs: clean up some DocBook loose endsJonathan Corbet1-1/+0
There were a few bits and pieces left over from the now-disused DocBook toolchain; git rid of them. Reported-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-06-22gcc-plugins: Add the randstruct pluginKees Cook1-0/+2
This randstruct plugin is modified from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. The randstruct GCC plugin randomizes the layout of selected structures at compile time, as a probabilistic defense against attacks that need to know the layout of structures within the kernel. This is most useful for "in-house" kernel builds where neither the randomization seed nor other build artifacts are made available to an attacker. While less useful for distribution kernels (where the randomization seed must be exposed for third party kernel module builds), it still has some value there since now all kernel builds would need to be tracked by an attacker. In more performance sensitive scenarios, GCC_PLUGIN_RANDSTRUCT_PERFORMANCE can be selected to make a best effort to restrict randomization to cacheline-sized groups of elements, and will not randomize bitfields. This comes at the cost of reduced randomization. Two annotations are defined,__randomize_layout and __no_randomize_layout, which respectively tell the plugin to either randomize or not to randomize instances of the struct in question. Follow-on patches enable the auto-detection logic for selecting structures for randomization that contain only function pointers. It is disabled here to assist with bisection. Since any randomized structs must be initialized using designated initializers, __randomize_layout includes the __designated_init annotation even when the plugin is disabled so that all builds will require the needed initialization. (With the plugin enabled, annotations for automatically chosen structures are marked as well.) The main differences between this implemenation and grsecurity are: - disable automatic struct selection (to be enabled in follow-up patch) - add designated_init attribute at runtime and for manual marking - clarify debugging output to differentiate bad cast warnings - add whitelisting infrastructure - support gcc 7's DECL_ALIGN and DECL_MODE changes (Laura Abbott) - raise minimum required GCC version to 4.7 Earlier versions of this patch series were ported by Michael Leibowitz. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-26Documentation: dontdiff: Update with additional entriesFlorian Fainelli1-2/+5
Add a bunch of entries reflective of programs that the kernel build: sortextable, dtc. And while at it, expand the lex*.c entries to cover e.g: dtc-lexer.c. Finally, exclude devicetable-offsets.h Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-14Remove last traces of ikconfig.hPaul Bolle1-1/+0
The build system stopped generating ikconfig.h in v2.6.8. Remove an entry for it in dontdiff. There's also a reference to it in a small comment. Remove that comment too, as it is of little help in any case. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-06-07GCC plugin infrastructureEmese Revfy1-0/+1
This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-11-11Documentation: dontdiff: remove media from dontdiffWang YanQing1-1/+0
media will hide all the changes in drivers/media. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-04-09Documentation: LLVMLinux: Update Documentation/dontdiffJan-Simon Möller1-0/+3
Clang has a few other kinds of derived files which shouldn't be added to a patch. Add them to the Documentation/dontdiff file to prevent this. Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Behan Webster <behanw@converseincode.com> Cc: PaX Team <pageexec@freemail.hu>
2012-11-19x86: remove offsets.h from .gitignore and dontdiffPaul Bolle1-1/+0
Commit 77d1a4999502c260df0eb2de437d320bf8c64b36 ("x86, boot: make symbols from the main vmlinux available") removed all traces of offsets.h from the tree. Remove its entries in dontdiff and x86/boot's .gitignore file too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-01oss: remove maui_boot.h from .gitignore and dontdiffPaul Bolle1-1/+0
Commit d56b9b9c464a10ab1ee51a4c6190a2b57b8ef7a6 ("The scheduled removal of some OSS drivers") removed all traces of maui_boot.h from the tree. Remove its entries in dontdiff and oss's .gitignore file. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-13kconfig: remove lkc_defs.h from .gitignore and dontdiffPaul Bolle1-1/+0
Commit 5a6f8d2bd9e3392569ed6f29ea4d7210652f929b ("kconfig: nuke LKC_DIRECT_LINK cruft") removed all traces of lkc_defs.h from the tree. Remove its entries in dontdiff and kconfig's .gitignore file too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-03-30Documentation: remove 'mach' from dontdiff fileH Hartley Sweeten1-1/+0
The mach entry in the dontdiff file causes all the arch/arm/mach-*/include/mach directories to be skipped. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-27[S390] Remove Kerntypes leftoversHeiko Carstens1-1/+0
Remove last traces of our kerntypes patch which was always an addon patch which never got upstream. Somehow a few bits got upstream anyway. Since kerntypes aren't used anymore and lcrash isn't maintained (for s390 at least) remove the last traces of kerntypes that somehow went upstream. Also remove the documentation that mentions lcrash. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23Documentation: update dontdiff fileRandy Dunlap1-12/+46
v2, updated based on comments from Joe and Paul. Update to Documentation/dontdiff, based on many updates to various .gitignore patches over the last 2 years. Initially begun by Michael Prokop <mika@grml.org>, with lots of changes by Randy Dunlap. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michael Prokop <mika@grml.org> Cc: Joe Perches <joe@perches.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-06Documentation/dontdiff: add further autogenerated files to ignore listMichael Prokop1-0/+26
Mainly resulting from (but not limited to) autogenerated files of lib/raid6 and drivers/gpu/drm/radeon. List generated as result of a diff of a clean 2.6.36 tree against a built one. Signed-off-by: Michael Prokop <mika@grml.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-25Merge branch 'for-linus-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: simplification of scripts/extract-ikconfig
2009-12-12dontdiff: add generatedSam Ravnborg1-0/+1
We move more and more stuff to include/generated - so lets ignore the content for users of plain diff. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-24SELinux: add .gitignore files for dynamic classesEric Paris1-0/+3
The SELinux dynamic class work in c6d3aaa4e35c71a32a86ececacd4eea7ecfc316c creates a number of dynamic header files and scripts. Add .gitignore files so git doesn't complain about these. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-10-07kconfig: simplification of scripts/extract-ikconfigDick Streefland1-1/+0
I've rewritten the extract-ikconfig script to extract the kernel configuration from a kernel compiled with CONFIG_IKCONFIG. The main motivation for the rewrite was to remove the dependency on the external C program binoffset.c, which is compiled on the initial run. The binoffset executable is invoked with a relative path, which means that the old script can only be run from the top of the kernel tree, and only when you have write permission in the scripts directory. The new script uses tr/grep/tail/zcat only, and can be invoked from anywhere. The binoffset.c program has been removed. This script requires GNU grep 2.5 (released 2002-03-13) or higher, because the -o option was introduced in that version. Signed-off-by: Dick Streefland <dick@streefland.net> LKML-Reference: <20091006203540.GA14634@streefland.net> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-15sparc: Kill PROM console driver.David S. Miller1-1/+0
Many years ago when this driver was written, it had a use, but these days it's nothing but trouble and distributions should not enable it in any situation. Pretty much every console device a sparc machine could see has a bonafide real driver, making the PROM console hack unnecessary. If any new device shows up, we should write a driver instead of depending upon this crutch to save us. We've been able to take care of this even when no chip documentation exists (sunxvr500, sunxvr2500) so there are no excuses. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26dontdiff: Fix asm excludeAlan Cox1-1/+0
Now that the headers are in arch/foo/include/asm we don't want to exclude them when preparing diff files. Closes-bug: 12921 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16dontdiff: more updates to be closer to gitignoreRandy Dunlap1-26/+33
defkeymap.c_shipped should be diffed if it is changed. Reported-by: Mike Galbraith <efault@gmx.de> COPYING, CREDITS, .mailmap should be diffed if they are changed. keywords.c_shipped & lex.c_shipped should be diffed when changed. parse.[ch]_shipped should be diffed when changed. Reported-by: Sam Ravnborg <sam@ravnborg.org> vsyscall* updates from a .gitignore patch by "Denis V. Lunev" <den@openvz.org>. *.so.dbg from a .gitignore patch by Thomas Gleixner <tglx@linutronix.de>. binoffset from a .gitignore patch by Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>. Module.markers from a .gitignore patch by Matthew Wilcox <willy@linux.intel.com>. vmlinux*.lds* should be diffed if changed. Reported-by: Etienne Lorrain <etienne_lorrain@yahoo.fr> vmlinux.lds from a .gitignore patch by Daniel Guilak <daniel@danielguilak.com>. *.scr should be diffed if changed. Lots of updates from http://lkml.org/lkml/2008/5/20/32 Reported-by: Bart Van Assche <bart.vanassche@gmail.com> Use ncscope.* instead of *cscope* since the latter may catch too many files. Add *.elf, from a .gitignore patch by Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>. Make firmware entries match .gitignore entries. Make some entries less greedy by removing trailing '*'. Remove "make_times_h" (no such file). Remove "filelist" (no such file). Remove "dummy_sym.c" (no such file). Remove "gen-kdb_cmds.c" (no such file). Remove "gentbl" (no such file). Remove "kconfig.tk" (no such file). Remove "tkparse" (no such file). Remove "sim710_d.h" (no such file). Remove "53c8xx_d.h" (no such file). Add "syscalltab.h" (generated file). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02don't diff generated firmware filesArjan van de Ven1-0/+2
With the new firmware infrastructure in 2.6.27, some files are generated and shouldn't be diffed; add these 2 to the "dontdiff" file Signed-off-by: Arjan van de Ven <arjan@Linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28dontdiff: ignore timeconst.hBen Dooks1-0/+1
Ignore the autobuilt kernel/timeconst.h when using diff on an built kernel tree. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28dontdiff: add modules.orderBen Dooks1-0/+1
Add modules.order to the list of files that shoud be ignored when using diff on a built kernel tree. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-21Documentation: Remove last references to BitKeeper.Cyril Brulebois1-1/+0
Remove BitKeeper from dontdiff. Point to the klibc git repository instead of old BitKeeper ones. Signed-off-by: Cyril Brulebois <cyril.brulebois@kerlabs.com> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-01-11[SCSI] 53c7xx: fix removal falloutAdrian Bunk1-2/+0
This patch does some additional cleanups after the 53c7xx removal. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-17dontdiff: update based on gitignore updatesRandy Dunlap1-1/+6
Update dontdiff, based on .gitignore patches from Pete Zaitcev and Adrian Bunk. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki1-1/+0
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31update dontdiff fileRandy Dunlap1-0/+3
Updates based on recent .gitignore updates: *.o.*: Says Alexey Dobriyan: These are presumably temporary gcc files, which aren't interesting. setup.bin, setup.elf: new x86 boot code files (from Matthew Wilcox) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23update dontdiff fileRandy Dunlap1-1/+41
Update dontdiff file by adding entries from many .gitignore files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02[PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiffAndi Kleen1-2/+2
asm-offsets.c is valid source code and needs to be diffed. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-25dontdiff: add utsrelease.hRandy Dunlap1-0/+1
Add auto-generated utsrelease.h to dontdiff file. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-13[PATCH] dontdiff: add asm_offsetsMichal Piotrowski1-0/+1
We seem to use both asm-offsets.* and asm_offsets.* Signed-off-by: Michal K. K. Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03[PATCH] ARM: 2840/1: Add mach-types to Documentation/dontdiffMichael Burian1-0/+1
Patch from Michael Burian This file is maintained by RMK's machine registry, it should not be patched. Signed-off-by: Michael Burian <dynmail1@gassner-waagen.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-16[PATCH] ARM: 2794/1: Add "Image" and "mach-types.h" to dontdiff listMichael Burian1-0/+2
Patch from Michael Burian comment in "mach-types.h" tells that it should not be patched "Image" is a binary, just as zImage, uImage and friends are Signed-off-by: Michael Burian <dynmail1@gassner-waagen.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>