| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- enable GCOV
- rework setup of protection map
- add support for more MSCC platforms
- add sysfs boardinfo for Loongson64
- enable KASLR for Loogson64
- add reset controller for BCM63xx
- cleanups and fixes
* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
mips: fix Section mismatch in reference
MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
MAINTAINERS: Remove JZ4780 DMA driver entry
MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
MIPS: Octeon: irq: Alloc desc before configuring IRQ
MIPS: mm: Add back define for PAGE_SHARED
MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
mips: lib: uncached: fix non-standard usage of variable 'sp'
MIPS: DTS: img: Fix schema warnings for pwm-leds
MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
MIPS: Move memblock_dump_all() to the end of setup_arch()
MIPS: SMP-CPS: Add support for irq migration when CPU offline
MIPS: OCTEON: Don't add kernel sections into memblock allocator
MIPS: Don't round up kernel sections size for memblock_add()
MIPS: Enable GCOV
MIPS: configs: drop unused BACKLIGHT_GENERIC option
MIPS: Loongson64: Fix up reserving kernel memory range
MIPS: mm: Remove unused is_aligned_hugepage_range
MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
...
|
|
Add YAML DT binding documentation for the SiFive FU740 PRCI. The
link of unmatched board as follow, the U740-C000 manual would be present
in the same page later.
https://www.sifive.com/boards/hifive-unmatched
Passes dt_binding_check.
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20201126030043.67390-1-zong.li@sifive.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for controlling the TI PRU, adds hooks for
remoteproc drivers to override the default ELF based coredump format,
introduces a library function for coredumps using named sections (aka
the Qualcomm "minidump" format).
It also fixes a problem with inconsistent notifications sent by the
Qualcomm sysmon driver to the remote processors and it migrates the
Qualcomm MSS driver to use power-domains for resources that aren't
actually regulators.
Lastly it contains a number of fixes for minor bugs and build warnings
throughout the drivers"
* tag 'rproc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (47 commits)
remoteproc/mediatek: read IPI buffer offset from FW
remoteproc/mediatek: unprepare clk if scp_before_load fails
remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio()
remoteproc/mediatek: Fix kernel test robot warning
remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories()
remoteproc: qcom: pas: fix error handling in adsp_pds_enable
remoteproc: qcom: fix reference leak in adsp_start
remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable
remoteproc/mtk_scp: surround DT device IDs with CONFIG_OF
remoteproc: qcom: Add minidump id for sm8150 modem
remoteproc: qcom: Add capability to collect minidumps
remoteproc: coredump: Add minidump functionality
remoteproc: core: Add ops to enable custom coredump functionality
remoteproc/mediatek: change MT8192 CFG register base
remoteproc: pru: Add support for various PRU cores on K3 J721E SoCs
remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs
remoteproc: pru: Add pru-specific debugfs support
remoteproc: pru: Add support for PRU specific interrupt configuration
remoteproc: pru: Add a PRU remoteproc driver
dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Decode PCIe 64 GT/s link speed (Gustavo Pimentel)
- Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit)
- Reduce pci_set_cacheline_size() message to debug level (Heiner
Kallweit)
- Fix pci_slot_release() NULL pointer dereference (Jubin Zhong)
- Unify ECAM constants in native PCI Express drivers (Krzysztof
Wilczyński)
- Return u8 from pci_find_capability() and similar (Puranjay Mohan)
- Return u16 from pci_find_ext_capability() and similar (Bjorn
Helgaas)
- Fix ACPI companion lookup for device 0 on the root bus (Rafael J.
Wysocki)
Resource management:
- Keep both device and resource name for config space remaps
(Alexander Lobakin)
- Bounds-check command-line resource alignment requests (Bjorn
Helgaas)
- Fix overflow in command-line resource alignment requests (Colin Ian
King)
Driver binding:
- Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan)
Power management:
- Save/restore Precision Time Measurement Capability for
suspend/resume (David E. Box)
- Disable PTM during suspend to save power (David E. Box)
- Add sysfs attribute for device power state (Maximilian Luz)
- Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg)
- Do not generate wakeup event when runtime resuming device (Mika
Westerberg)
- Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar)
Virtualization:
- Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher)
- Add function 1 DMA alias quirk for Marvell 9215 SATA controller
(Bjorn Helgaas)
MSI:
- Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko)
- Improve warnings for 32-bit-limited MSI support (Vidya Sagar)
Error handling:
- Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V
Kelley)
- Rename reset_link() to reset_subordinates() (Sean V Kelley)
- Write AER Capability only when we control it (Sean V Kelley)
- Clear AER status only when we control AER (Sean V Kelley)
- Bind RCEC devices to the Root Port driver (Qiuxu Zhuo)
- Recover from RCiEP AER errors (Qiuxu Zhuo)
- Recover from RCEC AER errors (Sean V Kelley)
- Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley)
- Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley)
- Add RCEC AER error injection support (Qiuxu Zhuo)
Broadcom iProc PCIe controller driver:
- Fix out-of-bound array accesses (Bharat Gooty)
- Invalidate correct PAXB inbound windows (Roman Bacik)
- Enhance PCIe Link information display (Srinath Mannam)
Cadence PCIe controller driver:
- Make "cdns,max-outbound-regions" property optional (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Offset client MSI-X vectors (Jon Derrick)
- Update type of __iomem pointers (Krzysztof Wilczyński)
NVIDIA Tegra PCIe controller driver:
- Move "dbi" accesses to post common DWC initialization (Vidya Sagar)
- Read "dbi" base address to program in application logic (Vidya
Sagar)
- Fix ASPM-L1SS advertisement disable code (Vidya Sagar)
- Set DesignWare IP version (Vidya Sagar)
- Continue unconfig sequence even if parts fail (Vidya Sagar)
- Check return value of tegra_pcie_init_controller() (Vidya Sagar)
- Disable LTSSM during L2 entry (Vidya Sagar)
Qualcomm PCIe controller driver:
- Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam)
- Add SM8250 SoC support (Manivannan Sadhasivam)
- Add support for configuring BDF to SID mapping for SM8250
(Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- rcar: Drop unused members from struct rcar_pcie_host (Lad
Prabhakar)
- PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar)
- PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro
Shimoda)
- PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda)
Samsung Exynos PCIe controller driver:
- Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung)
- Rework driver to support Exynos5433 variant (Jaehoon Chung)
- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie binding (Marek Szyprowski)
- Add the samsung,exynos-pcie-phy binding (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Support multiple ATU memory regions (Rob Herring)
- Move intel-gw ATU offset out of driver match data (Rob Herring)
- Move "dbi", "dbi2", and "addr_space" resource setup into common
code (Rob Herring)
- Remove intel-gw unneeded function wrappers (Rob Herring)
- Ensure all outbound ATU windows are reset (Rob Herring)
- Use the common MSI irq_chip in dra7xx (Rob Herring)
- Drop the .set_num_vectors() host op (Rob Herring)
- Move MSI interrupt setup into DWC common code (Rob Herring)
- Rework MSI initialization (Rob Herring)
- Move link handling into common code (Rob Herring)
- Move dw_pcie_msi_init() into core (Rob Herring)
- Move dw_pcie_setup_rc() to DWC common code (Rob Herring)
- Remove unnecessary wrappers around dw_pcie_host_init() (Rob
Herring)
- Drop keystone duplicated 'num-viewport'" (Rob Herring)
- Move inbound and outbound windows to common struct (Rob Herring)
- Detect number of iATU windows (Rob Herring)
- Warn if non-prefetchable memory aperture size is > 32-bit (Vidya
Sagar)
- Add support to program ATU for >4GB memory (Vidya Sagar)
- Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar)
TI J721E PCIe driver:
- Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I)
- Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham
I)
- Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I)
- Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
(Kishon Vijay Abraham I)
TI Keystone PCIe controller driver:
- Enable compile-testing on !ARM (Alex Dewar)"
* tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
PCI/ACPI: Fix companion lookup for device 0 on the root bus
PCI: Keep both device and resource name for config space remaps
PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
PCI: vmd: Update type of the __iomem pointers
PCI: iproc: Convert to use the new ECAM constants
PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
PCI: Unify ECAM constants in native PCI Express drivers
PCI: Disable PTM during suspend to save power
PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
PCI: Mark AMD Raven iGPU ATS as broken in some platforms
PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
PCI: Reduce pci_set_cacheline_size() message to debug level
PCI: Remove unused HAVE_PCI_SET_MWI
PCI: qcom: Add SM8250 SoC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add upper and lower limits clamps for the cooling device state in the
power allocator governor (Michael Kao)
- Add upper and lower limits support for the power allocator governor
(Lukasz Luba)
- Optimize conditions testing for the trip points (Bernard Zhao)
- Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
(Tian Tao)
- Add MT8516 dt-bindings and device reset optional support (Fabien
Parent)
- Add a quiescent period to cool down the PCH when entering S0iX
(Sumeet Pawnikar)
- Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
Li)
- Remove useless NULL check in the hwmon driver (Bernard Zhao)
- Update the current state in the cpufreq cooling device only if the
frequency change is effective (Zhuguangqing)
- Improve the schema validation for the rcar DT bindings (Geert
Uytterhoeven)
- Fix the user time unit in the documentation (Viresh Kumar)
- Add PCI ids for Lewisburg PCH (Andres Freund)
- Add hwmon support on amlogic (Martin Blumenstingl)
- Fix build failure for PCH entering on in S0iX (Randy Dunlap)
- Improve the k_* coefficient for the power allocator governor (Lukasz
Luba)
- Fix missing const on a sysfs attribute (Rikard Falkeborn)
- Remove broken interrupt support on rcar to be replaced by a new one
(Niklas Söderlund)
- Improve the error code handling at init time on imx8mm (Fabio
Estevam)
- Compute interval validity once instead at each temperature reading
iteration on acerhdf (Daniel Lezcano)
- Add r8a779a0 support (Niklas Söderlund)
- Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
Pandruvada)
- Add RFIM and mailbox support on int340x (Srinivas Pandruvada)
- Use macro for temperature calculation on PCH (Sumeet Pawnikar)
- Simplify return conditions at probe time on Broadcom (Zheng Yongjun)
- Fix workload name on PCH (Srinivas Pandruvada)
- Migrate the devfreq cooling device code to the energy model API
(Lukasz Luba)
- Emit a warning if the thermal_zone_device_update is called without
the .get_temp() ops (Daniel Lezcano)
- Add critical and hot ops for the thermal zone (Daniel Lezcano)
- Remove notification usage when critical is reached on rcar (Daniel
Lezcano)
- Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)
* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
thermal/drivers/rcar: Remove notification usage
thermal/core: Add critical and hot ops
thermal/core: Emit a warning if the thermal zone is updated without ops
drm/panfrost: Register devfreq cooling and attempt to add Energy Model
thermal: devfreq_cooling: remove old power model and use EM
thermal: devfreq_cooling: add new registration functions with Energy Model
thermal: devfreq_cooling: use a copy of device status
thermal: devfreq_cooling: change tracing function and arguments
thermal: int340x: processor_thermal: Correct workload type name
thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
thermal: intel: pch: use macro for temperature calculation
thermal: int340x: processor_thermal: Add mailbox driver
thermal: int340x: processor_thermal: Add RFIM driver
thermal: int340x: processor_thermal: Add AlderLake PCI device id
thermal: int340x: processor_thermal: Refactor MMIO interface
thermal: rcar_gen3_thermal: Add r8a779a0 support
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
platform/x86/drivers/acerhdf: Check the interval value when it is set
platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for inhibiting input devices at request from userspace. If a
device implements open/close methods, it can also put device into low
power state. This is needed, for example, to disable keyboard and
touchpad on convertibles when they are transitioned into tablet mode
- now that ordinary input devices can be configured for polling mode,
dedicated input polling device implementation has been removed
- GTCO tablet driver has been removed, as it used problematic custom
HID parser, devices are EOL, and there is no interest from the
manufacturer
- a new driver for Dialog DA7280 haptic chips has been introduced
- a new driver for power button on Dell Wyse 3020
- support for eKTF2132 in ektf2127 driver
- support for SC2721 and SC2730 in sc27xx-vibra driver
- enhancements for Atmel touchscreens, AD7846 touchscreens, Elan
touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers
- fixes and cleanups to allow clean builds with W=1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: da7280 - fix spelling mistake "sequemce" -> "sequence"
Input: cyapa_gen6 - fix out-of-bounds stack access
Input: sc27xx - add support for sc2730 and sc2721
dt-bindings: input: Add compatible string for SC2721 and SC2730
dt-bindings: input: Convert sc27xx-vibra.txt to json-schema
Input: stmpe - add axis inversion and swapping capability
Input: adp5589-keys - do not explicitly control IRQ for wakeup
Input: adp5589-keys - do not unconditionally configure as wakeup source
Input: ipx4xx-beeper - convert comma to semicolon
Input: parkbd - convert comma to semicolon
Input: new da7280 haptic driver
dt-bindings: input: Add document bindings for DA7280
MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms
Input: elantech - fix protocol errors for some trackpoints in SMBus mode
Input: elan_i2c - add new trackpoint report type 0x5F
Input: elants - document some registers and values
Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()
Input: imx_keypad - add COMPILE_TEST support
Input: applespi - use new structure for SPI transfer delays
Input: synaptics-rmi4 - use new structure for SPI transfer delays
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- SB-TSI sensors
- Lineat Technology LTC2992
- Delta power supplies Q54SJ108A2
- Maxim MAX127
- Corsair PSU
- STMicroelectronics PM6764 Voltage Regulator
New chip support:
- P10 added to fsi/occ driver
- NCT6687D added to nct6883 driver
- Intel-based Xserves added to applesmc driver
- AMD family 19h model 01h added to amd_energy driver
And various minor bug fixes and improvements"
* tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
dt-bindings: (hwmon/sbtsi_temp) Add SB-TSI hwmon driver bindings
hwmon: (sbtsi) Add documentation
hwmon: (sbtsi) Add basic support for SB-TSI sensors
hwmon: (iio_hwmon) Drop bogus __refdata annotation
hwmon: (xgene) Drop bogus __refdata annotation
dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
hwmon: (occ) Add new temperature sensor type
fsi: occ: Add support for P10
dt-bindings: fsi: Add P10 OCC device documentation
dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
hwmon: (ltc2992) Fix less than zero comparisons with an unsigned integer
hwmon: (pmbus/q54sj108a2) Correct title underline length
dt-bindings: hwmon: Add documentation for ltc2992
hwmon: (ltc2992) Add support for GPIOs.
hwmon: (ltc2992) Add support
hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2
hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator
hwmon: (nct6683) Support NCT6687D.
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Initial support for SD express card/host
MMC host:
- mxc: Convert the driver to DT-only
- mtk-sd: Add HS400 enhanced strobe support
- mtk-sd: Add support for the MT8192 SoC variant
- sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040
- sdhci-esdhc-imx: Convert the driver to DT-only
- sdhci-pci-gli: Improve performance for HS400 mode for GL9763E
- sdhci-pci-gli: Reduce power consumption for GL9755
- sdhci-xenon: Introduce ACPI support
- tmio: Fix command error processing
- tmio: Inform the core about the max_busy_timeout
- tmio/renesas_sdhi: Support custom calculation of busy-wait time
- renesas_sdhi: Reset SCC only when available
- rtsx_pci: Add SD Express mode support for RTS5261
- rtsx_pci: Various fixes and improvements for RTS5261
MEMSTICK:
- Minor fixes/improvements"
* tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits)
dt-bindings: mmc: eliminate yamllint warnings
mmc: sdhci-xenon: introduce ACPI support
mmc: sdhci-xenon: use clk only with DT
mmc: sdhci-xenon: switch to device_* API
mmc: sdhci-xenon: use match data for controllers variants
dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver
mmc: renesas_sdhi: populate hook for longer busy_wait
mmc: tmio: add hook for custom busy_wait calculation
mmc: tmio: set max_busy_timeout
dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string
mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E
mmc: sdhci: Use more concise device_property_read_u64
memstick: r592: Fix error return in r592_probe()
mmc: mxc: Convert the driver to DT-only
mmc: mxs: Remove the unused .id_table
mmc: sdhci-of-arasan: Fix fall-through warnings for Clang
mmc: sdhci-pci-gli: Reduce power consumption for GL9755
mmc: mediatek: depend on COMMON_CLK to fix compile tests
mmc: pxamci: Fix error return code in pxamci_probe
mmc: sdhci: Update firmware interface API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"A bit smaller this time with mostly usual driver updates. Slave
support for imx stands out a little"
* 'i2c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (30 commits)
i2c: remove check that can never be true
i2c: Warn when device removing fails
dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
dt-bindings: i2c: Add compatible string for AM64 SoC
i2c: designware: Make register offsets all of the same width
i2c: designware: Switch header to use BIT() and GENMASK()
i2c: pxa: move to generic GPIO recovery
i2c: sh_mobile: Mark adapter suspended during suspend
i2c: owl: Add compatible for the Actions Semi S500 I2C controller
dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
i2c: imx: support slave mode for imx I2C driver
i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL
i2c: ocores: Avoid false-positive error log message.
Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"
i2c: mxs: Remove unneeded platform_device_id
i2c: pca-platform: drop two members from driver data that are assigned to only
i2c: imx: Remove unused .id_table support
i2c: nvidia-gpu: drop empty stub for runtime pm
dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema
i2c: mv64xxx: Add bus error recovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big change this release has been some excellent work from Lukas
Wunner which closes a bunch of holes in the cleanup paths for drivers,
mainly introduced as a result of devm conversions causing bad
interactions with the support SPI has for allocating the bus and
driver data together.
Together with some of the other work done it feels like we've turned
the corner on several long standing pain points with the API.
Summary:
- Many cleanups around probe/remove and error handling from Lukas
Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
Qilong.
- Provide a mask for which bits of the mode can safely be configured
by drivers and use that to fix an issue with the ADS7846 driver.
- Documentation of the expected interactions between SPI and GPIO
level chip select polarity configuration from H. Nikolaus Schaller,
hopefully we're pretty much at the end of sorting out the
interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
Walleij for this.
- DMA support for Allwinner sun6i controllers.
- Support for Canaan K210 Designware implementations and Intel Adler
Lake"
* tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
spi: Limit the spi device max speed to controller's max speed
spi: spi-geni-qcom: Use the new method of gpio CS control
platform/chrome: cros_ec_spi: Drop bits_per_word assignment
platform/chrome: cros_ec_spi: Don't overwrite spi::mode
spi: dw: Add support for the Canaan K210 SoC SPI
spi: dw: Add support for 32-bits max xfer size
dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller
spi: Update DT binding docs to support SiFive FU740 SoC
spi: atmel-quadspi: Fix use-after-free on unbind
spi: npcm-fiu: Disable clock in probe error path
spi: ar934x: Don't leak SPI master in probe error path
spi: mt7621: Don't leak SPI master in probe error path
spi: mt7621: Disable clock in probe error path
media: netup_unidvb: Don't leak SPI master in probe error path
spi: sc18is602: Don't leak SPI master in probe error path
spi: rb4xx: Don't leak SPI master in probe error path
spi: gpio: Don't leak SPI master in probe error path
spi: spi-mtk-nor: Don't leak SPI master in probe error path
spi: mxic: Don't leak SPI master in probe error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a quiet release for the regulator API, a few new drivers
and the usual fixes and cleanup traffic but not much else going on:
- Optimisations for the handling of voltage enumeration, especially
with sparse selector sets, from Claudiu Beznea.
- Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00,
Qualcomm PMX55, PM8350 and PM8350c
The addition of the SCMI regulator driver (which controls regulators
via system firmware) means that we've pulled in the support for the
underlying firmware operations from the firmware tree"
* tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits)
regulator: mc13892-regulator: convert comma to semicolon
regulator: pfuze100: Convert the driver to DT-only
regulator: max14577: Add proper module aliases strings
regulator: da9121: Potential Oops in da9121_assign_chip_model()
regulator: da9121: Fix index used for DT property
regulator: da9121: Remove uninitialised string variable
regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x
regulator: qcom-rpmh: Add support for PM8350/PM8350c
regulator: dt-bindings: Add PM8350x compatibles
regulator: da9121: include linux/gpio/consumer.h
regulator: da9121: Mark some symbols with static keyword
regulator: da9121: Request IRQ directly and free in release function to avoid masking race
regulator: da9121: add interrupt support
regulator: da9121: add mode support
regulator: da9121: add current support
regulator: da9121: Update registration to support multiple buck variants
regulator: da9121: Add support for device variants via devicetree
regulator: da9121: Add device variant descriptors
regulator: da9121: Add device variant regmaps
regulator: da9121: Add device variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
staging: qlge: remove duplicate word in comment
staging: comedi: mf6x4: Fix AI end-of-conversion detection
staging: greybus: Add TODO item about modernizing the pwm code
pinctrl: ralink: add a pinctrl driver for the rt2880 family
dt-bindings: pinctrl: rt2880: add binding document
staging: rtl8723bs: remove ELEMENT_ID enum
staging: rtl8723bs: remove unused macros
staging: rtl8723bs: replace EID_EXTCapability
staging: rtl8723bs: replace EID_BSSIntolerantChlReport
staging: rtl8723bs: replace EID_BSSCoexistence
staging: rtl8723bs: replace _MME_IE_
staging: rtl8723bs: replace _WAPI_IE_
staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
staging: rtl8723bs: replace _ERPINFO_IE_
staging: rtl8723bs: replace _CHLGETXT_IE_
staging: rtl8723bs: replace _COUNTRY_IE_
staging: rtl8723bs: replace _IBSS_PARA_IE_
staging: rtl8723bs: replace _TIM_IE_
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be
more and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates"
* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
extcon: max77693: Fix modalias string
extcon: fsa9480: Support TI TSU6111 variant
extcon: fsa9480: Rewrite bindings in YAML and extend
dt-bindings: extcon: add binding for TUSB320
extcon: Add driver for TI TUSB320
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
siox: Make remove callback return void
siox: Use bus_type functions for probe, remove and shutdown
spmi: Add driver shutdown support
spmi: fix some coding style issues at the spmi core
spmi: get rid of a warning when built with W=1
uio: uio_hv_generic: use devm_kzalloc() for private data alloc
uio: uio_fsl_elbc_gpcm: use device-managed allocators
uio: uio_aec: use devm_kzalloc() for uio_info object
uio: uio_cif: use devm_kzalloc() for uio_info object
uio: uio_netx: use devm_kzalloc() for or uio_info object
uio: uio_mf624: use devm_kzalloc() for uio_info object
uio: uio_sercos3: use device-managed functions for simple allocs
uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
uio: uio_dmem_genirq: convert simple allocations to device-managed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "large" set of tty and serial patches for 5.11-rc1.
Nothing major at all, some cleanups and some driver removals, always a
nice sign:
- build warning cleanups
- vt locking and logic unwinding and cleanups
- tiny serial driver fixes and updates
- removal of the synclink serial driver as it's no longer needed
- removal of dead termiox code
All of this has been in linux-next for a while with no reported issues"
* tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits)
serial: 8250_pci: Drop bogus __refdata annotation
tty: serial: meson: enable console as module
serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
serial: imx: Move imx_uart_probe_dt() content into probe()
serial: imx: Remove unneeded of_device_get_match_data() NULL check
tty: Fix whitespace inconsistencies in vt_io_ioctl
serial_core: Check for port state when tty is in error state
dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
tty: use const parameters in port-flag accessors
tty: use assign_bit() in port-flag accessors
earlycon: drop semicolon from earlycon macro
tty: Remove dead termiox code
tty/serial/imx: Enable TXEN bit in imx_poll_init().
tty : serial: jsm: Fixed file by adding spacing
tty: serial: uartlite: Support probe deferral
earlycon: simplify earlycon-table implementation
tty: serial: bcm63xx: lower driver dependencies
serial: mxs-auart: Remove unneeded platform_device_id
serial: 8250-mtk: Fix reference leak in mtk8250_probe
serial: imx: Remove unused .id_table support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big USB and thunderbolt pull request for 5.11-rc1.
Nothing major in here, just the grind of constant development to
support new hardware and fix old issues:
- thunderbolt updates for new USB4 hardware
- cdns3 major driver updates
- lots of typec updates and additions as more hardware is available
- usb serial driver updates and fixes
- other tiny USB driver updates
All have been in linux-next with no reported issues"
* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: phy: convert comma to semicolon
usb: ucsi: convert comma to semicolon
usb: typec: tcpm: convert comma to semicolon
usb: typec: tcpm: Update vbus_vsafe0v on init
usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
usb: typec: Add class for plug alt mode device
USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
USB: typec: tcpm: Fix PR_SWAP error handling
USB: typec: tcpm: Hard Reset after not receiving a Request
USB: gadget: f_fs: remove likely/unlikely
usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
USB: gadget: f_midi: setup SuperSpeed Plus descriptors
USB: gadget: f_acm: add support for SuperSpeed Plus
USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
usb: typec: intel_pmc_mux: Configure cable generation value for USB4
MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
usb: cdns3: fix NULL pointer dereference on no platform data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes (slightly more code increase than usual) at this time,
while most of code changes are ASoC driver-specific.
Here are some highlights:
Core:
- The new auxiliary bus implementation for Intel DSP, which will be
used by other drivers as well
- Lots of ASoC core cleanups and refactoring
- UBSAN and KCSAN fixes in rawmidi, sequencer and a few others
- Compress-offload API enhancement for the pause during draining
HD- and USB-audio:
- Enhancements of the USB-audio implicit feedback support, including
better full-duplex operations
- Continued CA0132 improvements and fixes
- A few new quirk entries, HDMI audio fixes
ASoC:
- Support for boot time selection of Intel DSP firmware, which should
help distros/users testing new stuff more easily; the kconfig was
moved to boot time option, too
- Some basic DPCM support in audio graph card
- Removal of old pre-DT Freescale drivers
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
RT715, Qualcomm SM8250 and simple GPIO based muxes"
* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
ALSA: pcm: oss: Fix potential out-of-bounds shift
ALSA: usb-audio: Fix potential out-of-bounds shift
ALSA: hda/ca0132 - Add ZxR surround DAC setup.
ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
ALSA: hda/hdmi: packet buffer index must be set before reading value
ASoC: SOF: imx: update kernel-doc description
ASoC: mediatek: mt8183: delete some unreachable code
ASoC: mediatek: mt8183: add PM ops to machine drivers
ASoC: topology: Fix wrong size check
ASoC: topology: Add missing size check
ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
ASoC: SOF: modify the SOF_DBG flags
ASoC: SOF: Intel: hda: remove duplicated status dump
ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
ASoC: rt1015p: move SDB control from trigger to DAPM
ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
ALSA: usb-audio: Fix control 'access overflow' errors from chmap
ALSA: hda/hdmi: always print pin NIDs as hexadecimal
ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
- Convert DT bindings to json-schema (Yoshihiro Shimoda)
- Document r8a77965 DT bindings (Yoshihiro Shimoda)
- Document r8a774e1 DT bindings (Lad Prabhakar)
* remotes/lorenzo/pci/rcar:
dt-bindings: PCI: rcar-pci-host: Document r8a774e1 bindings
dt-bindings: PCI: rcar-pci-host: Document r8a77965 bindings
dt-bindings: PCI: rcar-pci-host: Convert bindings to json-schema
PCI: rcar: Drop unused members from struct rcar_pcie_host
|
|
- Support multiple ATU memory regions (Rob Herring)
- Warn if non-prefetchable memory aperture is > 32-bit (Vidya Sagar)
- Allow programming ATU for >4GB memory (Vidya Sagar)
- Move ATU offset out of driver match data (Rob Herring)
- Move "dbi", "dbi2", and "addr_space" resource setup to common code (Rob
Herring)
- Remove unneeded function wrappers (Rob Herring)
- Ensure all outbound ATU windows are reset to reduce dependencies on
bootloader (Rob Herring)
- Use the default MSI irq_chip for dra7xx (Rob Herring)
- Drop the .set_num_vectors() host op (Rob Herring)
- Move MSI interrupt setup into DWC common code (Rob Herring)
- Rework and simplify DWC MSI initialization (Rob Herring)
- Move link handling to DWC common code (Rob Herring)
- Move dw_pcie_msi_init() calls to DWC common code (Rob Herring)
- Move dw_pcie_setup_rc() calls to DWC common code (Rob Herring)
- Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring)
- Revert "keystone: Drop duplicated 'num-viewport'" to prepare for
detecting number of iATU regions without help from DT (Rob Herring)
- Move inbound and outbound windows to common struct (Rob Herring)
- Detect number of DWC iATU windows from device registers (Rob Herring)
- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
- Add samsung,exynos-pcie and samsung,exynos-pcie-phy bindings for
Exynos5433 variant (Marek Szyprowski)
- Rework phy-exynos-pcie driver to support Exynos5433 PCIe PHY (Jaehoon
Chung)
- Rework pci-exynos.c to support Exynos5433 PCIe host (Jaehoon Chung)
- Move tegra "dbi" accesses to post common DWC initialization (Vidya Sagar)
- Read tegra dbi" base address in application logic (Vidya Sagar)
- Fix tegra ASPM-L1SS advertisement disable code (Vidya Sagar)
- Set Tegra194 DesignWare IP version to 0x490A (Vidya Sagar)
- Continue tegra unconfig sequence even if parts fail (Vidya Sagar)
- Check return value of tegra_pcie_init_controller() (Vidya Sagar)
- Disable tegra LTSSM during L2 entry (Vidya Sagar)
- Add SM8250 SoC PCIe DT bindings and support (Manivannan Sadhasivam)
- Add SM8250 BDF to SID mapping (Manivannan Sadhasivam)
- Set 32-bit DMA mask for DWC MSI target address allocation (Vidya Sagar)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
PCI: qcom: Add SM8250 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
PCI: tegra: Disable LTSSM during L2 entry
PCI: tegra: Check return value of tegra_pcie_init_controller()
PCI: tegra: Continue unconfig sequence even if parts fail
PCI: tegra: Set DesignWare IP version
PCI: tegra: Fix ASPM-L1SS advertisement disable code
PCI: tegra: Read "dbi" base address to program in application logic
PCI: tegra: Move "dbi" accesses to post common DWC initialization
PCI: dwc: exynos: Rework the driver to support Exynos5433 variant
phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY
dt-bindings: phy: exynos: add the samsung,exynos-pcie-phy binding
dt-bindings: PCI: exynos: add the samsung,exynos-pcie binding
dt-bindings: PCI: exynos: drop samsung,exynos5440-pcie binding
PCI: dwc: Detect number of iATU windows
PCI: dwc: Move inbound and outbound windows to common struct
Revert "PCI: dwc/keystone: Drop duplicated 'num-viewport'"
PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init()
PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
PCI: dwc: Move dw_pcie_msi_init() into core
PCI: dwc: Move link handling into common code
PCI: dwc: Rework MSI initialization
PCI: dwc: Move MSI interrupt setup into DWC common code
PCI: dwc: Drop the .set_num_vectors() host op
PCI: dwc/dra7xx: Use the common MSI irq_chip
PCI: dwc: Ensure all outbound ATU windows are reset
PCI: dwc/intel-gw: Remove some unneeded function wrappers
PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
PCI: dwc/intel-gw: Move ATU offset out of driver match data
PCI: dwc: Add support to program ATU for >4GB memory
PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
PCI: dwc: Support multiple ATU memory regions
|
|
* pm-devfreq:
PM / devfreq: tegra30: Separate configurations per-SoC generation
PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver
PM / devfreq: exynos-bus: Add registration of interconnect child device
dt-bindings: devfreq: Add documentation for the interconnect properties
soc/tegra: fuse: Add stub for tegra_sku_info
soc/tegra: fuse: Export tegra_read_ram_code()
clk: tegra: Export Tegra20 EMC kernel symbols
PM / devfreq: tegra30: Silence deferred probe error
PM / devfreq: tegra20: Relax Kconfig dependency
PM / devfreq: tegra20: Silence deferred probe error
PM / devfreq: Remove redundant governor_name from struct devfreq
PM / devfreq: Add governor attribute flag for specifc sysfs nodes
PM / devfreq: Add governor feature flag
PM / devfreq: Add tracepoint for frequency changes
PM / devfreq: Unify frequency change to devfreq_update_target func
trace: events: devfreq: Use fixed indentation size to improve readability
* pm-tools:
pm-graph v5.8
cpupower: Provide online and offline CPU information
|
|
My employment with TI is coming to an end, add the copyright and author comments
as they due and change the maintainer mail address.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20201215130512.8753-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
Cross-subsystem Changes:
* char/agp: Disable frontend without CONFIG_DRM_LEGACY
* mm: Fix fput in mmap error path; Introduce vma_set_file() to change
vma->vm_file
Core Changes:
* dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code;
Skip sync for unmapped buffers; Alloc higher order pages is available;
Respect num_fences when initializing shared fence list
* doc: Improvements around DRM modes and SCALING_FILTER
* Pass full state to connector atomic functions + callee updates
* Cleanups
* shmem: Map pages with caching by default; Cleanups
* ttm: Fix DMA32 for global page pool
* fbdev: Cleanups
* fb-helper: Update framebuffer after userspace writes; Unmap console buffer
during shutdown; Rework damage handling of shadow framebuffer
Driver Changes:
* amdgpu: Multi-hop fixes, Clenaups
* imx: Fix rotation for Vivante tiled formats; Support nearest-neighour
skaling; Cleanups
* mcde: Fix RGB formats; Support DPI output; Cleanups
* meson: HDMI clock fixes
* panel: Add driver and bindings for Innolux N125HCE-GN1
* panel/s6e63m0: More backlight levels; Fix init; Cleanups
* via: Clenunps
* virtio: Use fence ID for handling fences; Cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core:
- Robustness improvements for the NOHZ tick management
- Fixes and consolidation of the NTP/RTC synchronization code
- Small fixes and improvements in various places
- A set of function documentation udpates and fixes
Drivers:
- Cleanups and improvements in various clocksoure/event drivers
- Removal of the EZChip NPS clocksource driver as the platfrom
support was removed from ARC
- The usual set of new device tree binding and json conversions
- The RTC driver which have been acked by the RTC maintainer:
* fix a long standing bug in the MC146818 library code which can
cause reading garbage during the RTC internal update.
* changes related to the NTP/RTC consolidation work"
* tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
ntp: Fix prototype in the !CONFIG_GENERIC_CMOS_UPDATE case
tick/sched: Make jiffies update quick check more robust
ntp: Consolidate the RTC update implementation
ntp: Make the RTC sync offset less obscure
ntp, rtc: Move rtc_set_ntp_time() to ntp code
ntp: Make the RTC synchronization more reliable
rtc: core: Make the sync offset default more realistic
rtc: cmos: Make rtc_cmos sync offset correct
rtc: mc146818: Reduce spinlock section in mc146818_set_time()
rtc: mc146818: Prevent reading garbage
clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PM
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI
clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne
clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available
clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI
clocksource/drivers/ingenic: Fix section mismatch
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()
dt-bindings: timer: renesas: tmu: Convert to json-schema
dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings
clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path
...
|
|
Pull documentation updates from Jonathan Corbet:
"A much quieter cycle for documentation (happily), with, one hopes, the
bulk of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format
Documentation/features for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
there was some discussion on this, but we seem to have consensus and
an ack from Greg for that addition"
* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
docs: fix broken cross reference in translations/zh_CN
docs: Note that sphinx 1.7 will be required soon
docs: update requirements to install six module
docs: reporting-issues: move 'outdated, need help' note to proper place
docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
docs: add a reset controller chapter to the driver API docs
docs: make reporting-bugs.rst obsolete
docs: Add a new text describing how to report bugs
LICENSES: Add the CC-BY-4.0 license
Documentation: fix multiple typos found in the admin-guide subdirectory
Documentation: fix typos found in admin-guide subdirectory
kernel-doc: Fix example in Nested structs/unions
docs: clean up sysctl/kernel: titles, version
docs: trace: fix event state structure name
docs: nios2: add missing ReST file
scripts: get_feat.pl: reduce table width for all features output
scripts: get_feat.pl: change the group by order
scripts: get_feat.pl: make complete table more coincise
scripts: kernel-doc: fix parsing function-like typedefs
Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
|
|
Add a property dynamic-power-coefficient which allows to register Energy
Model for the Mali Bifrost devices.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20201209115143.15321-3-lukasz.luba@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add a property dynamic-power-coefficient which allows to register Energy
Model for the Mali Midgard devices.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20201209115143.15321-2-lukasz.luba@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"Somewhat busier than usual this cycle:
- Add support for AST2400 and AST2600 hw to aspeed_edac (Troy Lee)
- Remove an orphaned mv64x60_edac driver. Good riddance (Michael
Ellerman)
- Add a new igen6 driver for Intel client SoCs with an integrated
memory controller and using in-band ECC (Qiuxu Zhuo and Tony Luck)
- The usual smattering of fixes and cleanups all over"
* tag 'edac_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mv64x60: Remove orphan mv64x60 driver
EDAC/aspeed: Add support for AST2400 and AST2600
ARM: dts: aspeed: Add AST2600 EDAC into common devicetree
dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
EDAC/amd64: Fix PCI component registration
EDAC/igen6: ecclog_llist can be static
EDAC/i10nm: Add Intel Sapphire Rapids server support
EDAC: Add DDR5 new memory type
EDAC/i10nm: Use readl() to access MMIO registers
MAINTAINERS: Add entry for Intel IGEN6 EDAC driver
EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver
EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC
EDAC/synopsys: Return the correct value in mc_probe()
MAINTAINERS: Clean up the F: entries for some EDAC drivers
EDAC: Add three new memory types
EDAC: Fix some kernel-doc markups
EDAC: Do not issue useless debug statements in the polling routine
EDAC/amd64: Remove unneeded breaks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) updates for 5.11-rc1 from
Viresh Kumar:
"This contains the following updates:
- Allow empty (node-less) OPP tables in DT for passing just the
dependency related information (Nicola Mazzucato).
- Fix a potential lockdep in OPP core and other OPP core cleanups
(Viresh Kumar).
- Don't abuse dev_pm_opp_get_opp_table() to create an OPP table, fix
cpufreq-dt driver for the same (Viresh Kumar).
- dev_pm_opp_put_regulators() accepts a NULL argument now, updates to
all the users as well (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
opp: Don't return opp_dev from _find_opp_dev()
opp: Allocate the OPP table outside of opp_table_lock
opp: Always add entries in dev_list with opp_table->lock held
|
|
Pull auxdisplay updates from Miguel Ojeda:
"A bigger set of changes than usual for auxdisplay. There have been
quite a few changes in auxdisplay thanks to a refactor by Lars
Poeschel to share code in order to introduce a new driver.
Summary:
- Significant refactor work to make charlcd independent of device,
i.e. hd44780 (Lars Poeschel)
- New driver: lcd2s (Lars Poeschel)
- Fixes on top of the rework while being tested in -next (Lars
Poeschel, Dan Carpenter and kernel test robot)"
* tag 'auxdisplay-for-linus-v5.11' of git://github.com/ojeda/linux: (30 commits)
auxdisplay: panel: Remove redundant charlcd_ops structures
auxdisplay: panel: Fix missing print function pointer
auxdisplay: fix platform_no_drv_owner.cocci warnings
auxdisplay: fix use after free in lcd2s_i2c_remove()
auxdisplay: hd44780_common: Fix build error
auxdisplay: add a driver for lcd2s character display
auxdisplay: lcd2s DT binding doc
auxdisplay: charlcd: Do not print chars at end of line
auxdisplay: Change gotoxy calling interface
auxdisplay: charlcd: replace last device specific stuff
auxdisplay: hd44780: Remove clear_fast
auxdisplay: hd44780_common: Reduce clear_display timeout
auxdisplay: Call charlcd_backlight in place
auxdisplay: Move char redefine code to hd44780_common
auxdisplay: cleanup unnecessary hd44780 code in charlcd
auxdisplay: implement various hd44780_common_ functions
auxdisplay: Move init_display to hd44780_common
auxdisplay: Make use of enum for backlight on / off
auxdisplay: make charlcd_backlight visible to hd44780_common
auxdisplay: Move clear_display to hd44780_common
...
|
|
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
|
|
"#size-cells"
The "#address-cells" and "#size-cells" are required only when the I2C
controller has subnodes. However, some I2C controllers defined in
"arch/arm64/boot/dts/amd/" and "arch/arm64/boot/dts/hisilicon/"
directories do not have child nodes. So they don't need these two
properties and don't write them explicitly.
Therefore, setting properties "#address-cells" and "#size-cells" as
"required" in this yaml file causes the following warnings:
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#address-cells' is a required property
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#size-cells' is a required property
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201214124347.2120-2-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
|
|
PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.
Cc: linux-crypto@vger.kernel.org
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201210200315.2965567-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add devicetree binding documentation for regulator-poweroff driver.
Signed-off-by: Michael Klein <michael@fossekall.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document device tree bindings for AMD SB-TSI emulated temperature
sensor.
Signed-off-by: Kun Yi <kunyi@google.com>
Link: https://lore.kernel.org/r/20201211215427.3281681-4-kunyi@google.com
Reviewed-by: Rob Herring <robh@kernel.org>
[groeck: Fixed subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add new compatible strings to support sc2730 and sc2721 which are
two varieties of SC27XX family.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201117034949.47877-4-zhang.lyra@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the sprd sc27xx vibrator binding to DT schema using json-schema.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201117034949.47877-3-zhang.lyra@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the mt7621-gpio device tree bindings to the new YAML format.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201207081151.7489-1-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This describe the new bindings for the added IRQ support in the
pinctrl-microchip-sgpio driver.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201209142753.683208-3-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for 5.11 from Chanwoo Choi:
1. Update devfreq core
- Add new devfreq_frequency tracepoint to show the frequency change
information.
- Add governor feature flag. The devfreq governor is able to set the
specific flag in order to support a non-common feature. For
example, if the governor supports the 'immutable' feature, don't
allow user space to change the governor via sysfs.
- Add governor sysfs attribute flag for each sysfs file. Prior to that
the devfreq subsystem allowed all of the sysfs files to be accessed
regardless of the governor type. But some sysfs fils are not
supported by specific devfreq governors. In order to only allow the
sysfs files supported by the governor to be accessed, clarify the
access permissions of sysfs attributes according to the governor.
When adding the devfreq governor, specify the available attribute
information by using DEVFREQ_GOV_ATTR_* symbols. The user can read
or write the sysfs attributes in accordance to the specified
access permissions.
- Clean-up the code to reduce duplication for the devfreq tracepoint
and to remove redundant governor_name field from struct devfreq.
2. Update exynos-bus.c devfreq driver
- Add interconnect API support to the Samsung Exynos Bus Frequency
driver, exynos-bus.c. Complementing the devfreq driver with
interconnect functionality allows to ensure that the QoS
requirements regarding devices accessing the system memory (e.g.
video processing devices) will be met and allows to avoid issues
like DMA underrun.
3. Update tegra devfreq driver
- Add interconnect support and OPP interface to tegra30-devfreq.c.
Also, it is to guarantee the QoS requirement of some devices like
the display controller.
- Move tegra20-devfreq.c from drivers/devfreq/ into drivers/memory/tegra/
in order to use the more proper monitoring feature such as EMC_STAT
which is located in drivers/memory/tegra/.
- Separate the configuration information for different SoCs in
tegra30-devfrqe.c. The tegra30-devfreq.c had been supporting both
tegra30-actmon and tegra124-actmon devices. In order to use the
more correct configuration data, separate them.
- Use dev_err_probe() to handle the deferred probe error in
tegra30-devfreq.c.
4. Pull the request of 'Tegra SoC and clock controller changes for
v5.11' sent by Krzysztof Kozlowski <krzk@kernel.org> in order to
avoid a build error."
* tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Separate configurations per-SoC generation
PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver
PM / devfreq: exynos-bus: Add registration of interconnect child device
dt-bindings: devfreq: Add documentation for the interconnect properties
soc/tegra: fuse: Add stub for tegra_sku_info
soc/tegra: fuse: Export tegra_read_ram_code()
clk: tegra: Export Tegra20 EMC kernel symbols
PM / devfreq: tegra30: Silence deferred probe error
PM / devfreq: tegra20: Relax Kconfig dependency
PM / devfreq: tegra20: Silence deferred probe error
PM / devfreq: Remove redundant governor_name from struct devfreq
PM / devfreq: Add governor attribute flag for specifc sysfs nodes
PM / devfreq: Add governor feature flag
PM / devfreq: Add tracepoint for frequency changes
PM / devfreq: Unify frequency change to devfreq_update_target func
trace: events: devfreq: Use fixed indentation size to improve readability
|
|
New binding document for
Texas Instruments K3 Packet DMA (PKTDMA).
PKTDMA is introduced as part of AM64.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201208090440.31792-13-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
New binding document for
Texas Instruments K3 Block Copy DMA (BCDMA).
BCDMA is introduced as part of AM64.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201208090440.31792-12-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the Analog Devices ADM1275 bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201117220807.208747-4-krzk@kernel.org
[groeck: Removed unnecessary type ($ref) declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the P10 compatible string.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201120010315.190737-2-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the TI ADS7828 bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201117220807.208747-3-krzk@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
