summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial
AgeCommit message (Collapse)AuthorFilesLines
2020-06-11dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring1-3/+2
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-07Merge tag 'tty-5.8-rc1' of ↵Linus Torvalds4-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the tty and serial driver updates for 5.8-rc1 Nothing huge at all, just a lot of little serial driver fixes, updates for new devices and features, and other small things. Full details are in the shortlog. All of these have been in linux-next with no issues for a while" * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits) tty: serial: qcom_geni_serial: Add 51.2MHz frequency support tty: serial: imx: clear Ageing Timer Interrupt in handler serial: 8250_fintek: Add F81966 Support sc16is7xx: Add flag to activate IrDA mode dt-bindings: sc16is7xx: Add flag to activate IrDA mode serial: 8250: Support rs485 bus termination GPIO serial: 8520_port: Fix function param documentation dt-bindings: serial: Add binding for rs485 bus termination GPIO vt: keyboard: avoid signed integer overflow in k_ascii serial: 8250: Enable 16550A variants by default on non-x86 tty: hvc_console, fix crashes on parallel open/close serial: imx: Initialize lock for non-registered console sc16is7xx: Read the LSR register for basic device presence check sc16is7xx: Allow sharing the IRQ line sc16is7xx: Use threaded IRQ sc16is7xx: Always use falling edge IRQ tty: n_gsm: Fix bogus i++ in gsm_data_kick tty: n_gsm: Remove unnecessary test in gsm_print_packet() serial: stm32: add no_console_suspend support tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP ...
2020-05-29dt-bindings: serial: Add binding for UART pin swapAkash Asthana1-0/+8
Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-29dt-bindings: sc16is7xx: Add flag to activate IrDA modePascal Huerst1-0/+4
This series of uart controllers is able to work in IrDA mode. This adds a property to the device tree to enable that feature on selected ports if needed. Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200529055058.1606910-2-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29dt-bindings: serial: Add binding for rs485 bus termination GPIOLukas Wunner1-0/+4
Commit e8759ad17d41 ("serial: uapi: Add support for bus termination") introduced the ability to enable rs485 bus termination from user space. So far the feature is only used by a single driver, 8250_exar.c, using a hardcoded GPIO pin specific to Siemens IOT2040 products. Provide for a more generic solution by allowing specification of an rs485 bus termination GPIO pin in the device tree. An upcoming commit implements support for this pin for any 8250 driver. The binding is used in device trees of the "Revolution Pi" PLCs offered by KUNBUS. [Heiko Stuebner converted the binding to YAML, hence his Signed-off-by.] Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/4f4411895dc52c846f766e7f7207ec412c4811b6.1589811297.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-28dt-bindings: serial: Add renesas,em-uart bindingsGeert Uytterhoeven1-0/+49
Document Device Tree bindings for the Renesas EMMA Mobile UART Interface. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-28dt-bindings: serial: renesas,scifa: Remove part numbers from commentsGeert Uytterhoeven1-8/+8
The conversion to json-schema accidentally retained some SoC part numbers in comments for compatible values. Drop them, as they're part of the compatible values anyway. Fixes: 384d00fae8e51f8f ("dt-bindings: serial: sh-sci: Convert to json-schema") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-28dt-bindings: serial: renesas,scifa: Document r8a7742 bindingsLad Prabhakar1-0/+1
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIFA ports, so document the SoC specific bindings. Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-18dt-bindings: serial: qca,ar9330-uart: Convert to json-schemaOleksij Rempel2-31/+50
Convert the Qualcomm Atheros AR9330 High-Speed UART Device Tree binding documentation to json-schema. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-15dt-bindings: serial: Document CTS/RTS gpios in STM32 UARTManivannan Sadhasivam1-0/+14
Document the use of CTS/RTS gpios for flow control in STM32 UART controller. These properties can be used instead of 'st,hw-flow-ctrl' for making use of any gpio pins for flow control instead of dedicated pins. It should be noted that both CTS/RTS and 'st,hw-flow-ctrl' properties cannot co-exist in a design. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200420170204.24541-2-mani@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14dt-bindings: Fix incorrect 'reg' property sizesRob Herring1-1/+1
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-14dt-bindings: serial: renesas,hscif: Document r8a7742 bindingsLad Prabhakar1-0/+1
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible HSCIF ports, so document the SoC specific bindings. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-14dt-bindings: serial: renesas,scifb: Document r8a7742 bindingsLad Prabhakar1-0/+1
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIFB ports, so document the SoC specific bindings. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-14dt-bindings: serial: renesas,scif: Document r8a7742 bindingsLad Prabhakar1-0/+1
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIF ports, so document the SoC specific bindings. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-11dt-bindings: serial: Convert ingenic,uart.txt to YAMLPaul Cercueil2-28/+94
Convert the ingenic,uart.txt to a new ingenic,uart.yaml file. A few things were changed in the process: - the dmas and dma-names properties are now required. - the ingenic,jz4770-uart and ingenic,jz4775-uart compatible strings now require the ingenic,jz4760-uart string to be used as fallback, since the hardware is compatible. - the ingenic,jz4725b-uart compatible string was added, with a fallback to ingenic,jz4740-uart. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-06serial: samsung: dt-bindings: Add reg-io-width compatibleHyunki Koo1-0/+8
Add a description for reg-io-width options for the samsung serial UART peripheral. Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200506080242.18623-2-hyunki00.koo@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring3-23/+18
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-01dt-bindings: serial: Convert 8250 to json-schemaLubomir Rintel2-102/+233
Some fixes were done during the conversion: Slightly better examples. The original example was for an OMAP serial port, which is not even described by this binding, but by omap_serial.txt instead. Added compatible strings, that were used, byt not documented: andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64, nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart, opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart, ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b. Removed "serial" compatible string. It's redundant with the node name (which, in OFW, serves the same purpose as the compatible string). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [robh: allow additional properties. clocks/clock-frequency can be optional on original 8250 series with standard clocks] Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-30dt-bindings: serial: Move Marvell compatible string to 8250 binding docLubomir Rintel2-4/+2
These ports are compatible with NS8250 and handled by the same driver. Get rid of the extra document that fails to document the properties that are actually supported. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-16dt-bindings: Clean-up schema indentation formattingRob Herring2-16/+17
Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds14-274/+762
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-03-31dt-bindings: serial: sh-sci: Convert to json-schemaGeert Uytterhoeven6-150/+581
Convert the Renesas Serial Communication Interface ((H)SCI(F)(A|B)) Device Tree binding documentation to json-schema. Split the bindings in 5 files, one per major type, to ease expressing constraints. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: serial: Document serialN aliasesGeert Uytterhoeven1-0/+4
Document the format of aliases referring to UARTs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: Add missing 'additionalProperties: false'Rob Herring1-0/+2
Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org>
2020-03-23dt-bindings: serial: Convert slave-device bindings to json-schemaGeert Uytterhoeven2-45/+56
Convert the serial slave-device Device Tree binding documentation to json-schema, and incorporate it into the generic serial bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-23dt-bindings: serial: Convert generic bindings to json-schemaGeert Uytterhoeven4-59/+74
Convert the generic serial interface Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-12dt-bindings: serial: lpuart: add ls1028a compatibilityMichael Walle1-4/+6
Add the LS1028A SoC compatibility string to the lpuart devicetree bindings documentation. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200307091302.14881-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10dt-bindings: serial: snps-dw-apb-uart: add compatible property for rk3308 uartJohan Jonker1-0/+1
A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: serial@ff0d0000: compatible: ['rockchip,rk3308-uart', 'snps,dw-apb-uart'] is not valid under any of the given schemas arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dt.yaml: serial@ff0a0000: compatible: ['rockchip,rk3308-uart', 'snps,dw-apb-uart'] is not valid under any of the given schemas The compatible property for the Rockchip rk3308 uart was somehow never added to the documention. Fix this error by adding 'rockchip,rk3308-uart' to snps-dw-apb-uart.yaml. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/ snps-dw-apb-uart.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-06dt-bindings: serial: document fsl,inverted-tx and -rx optionsGeorge Hilliard1-0/+4
Add a description for the new fsl,inverted-tx and fsl,inverted-rx options for the i.MX UART peripheral. Signed-off-by: George Hilliard <ghilliard@kopismobile.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200226222319.18383-2-ghilliard@kopismobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-26dt-bindings: serial: Convert UniPhier UART to json-schemaMasahiro Yamada2-22/+46
Convert the UniPhier UART binding to DT schema format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-23dt-bindings: serial: Convert STM32 UART to json-schemaBenjamin Gaignard2-57/+80
Convert STM32 UART bindings to json-schema. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-23dt-bindings: serial: Convert rs485 bindings to json-schemaBenjamin Gaignard2-31/+46
Convert rs485 binding to yaml style file. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-16dt-bindings: serial: lpuart: add imx8qm compatible stringDong Aisheng1-0/+2
Add imx8qm compatible string. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-03Merge tag 'tty-5.5-rc1' of ↵Linus Torvalds3-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit later in the merge window than normal as I wanted to make sure some last-minute patches applied to it were all sane. They seem to be :) There's a lot of little stuff in here, for the tty core, and for lots of serial drivers: - reverts of uartlite serial driver patches that were wrong - msm-serial driver fixes - serial core updates and fixes - tty core fixes - serial driver dma mapping api changes - lots of other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" vcs: prevent write access to vcsu devices tty: vt: keyboard: reject invalid keycodes tty: don't crash in tty_init_dev when missing tty_port serial: stm32: fix clearing interrupt error flags tty: Fix Kconfig indentation, continued serial: serial_core: Perform NULL checks for break_ctl ops tty: remove unused argument from tty_open_by_driver() tty: Fix Kconfig indentation {tty: serial, nand: onenand}: samsung: rename to fix build warning serial: ifx6x60: add missed pm_runtime_disable serial: pl011: Fix DMA ->flush_buffer() Revert "serial-uartlite: Move the uart register" Revert "serial-uartlite: Add get serial id if not provided" Revert "serial-uartlite: Do not use static struct uart_driver out of probe()" Revert "serial-uartlite: Add runtime support" Revert "serial-uartlite: Change logic how console_port is setup" Revert "serial-uartlite: Use allocated structure instead of static ones" tty: serial: msm_serial: Use dma_request_chan() directly for channel request tty: serial: tegra: Use dma_request_chan() directly for channel request ...
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds4-90/+190
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-11-15dt-bindings: serial: Add a new compatible string for SC9863AChunyan Zhang1-0/+1
SC9863A use the same serial device which SC9836 uses. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-15dt-bindings: serial: Convert sprd-uart to json-schemaChunyan Zhang2-32/+71
Convert the sprd-uart binding to DT schema using json-schema. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [robh: dual license GPL/BSD] Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-05dt-bindings: serial: Convert Samsung UART bindings to json-schemaKrzysztof Kozlowski2-58/+118
Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-04dt-bindings: serial: sh-sci: Document r8a77961 bindingsGeert Uytterhoeven1-2/+4
Document support for the SCIF and HSCIF serial ports in the Renesas R-Car M3-W+ (R8A77961) SoC. Update all references to R-Car M3-W from "r8a7796" to "r8a77960", to avoid confusion between R-Car M3-W (R8A77960) and M3-W+. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191023123010.12501-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04dt-bindings: serial: lpuart: Drop unsupported RS485 bindingsAndrey Smirnov1-2/+1
LPUART driver does not support 'rs485-rts-delay' or 'rs485-rx-during-tx' properties. Remove them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191022044940.15119-1-andrew.smirnov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-14Merge 5.4-rc3 into tty-nextGreg Kroah-Hartman1-0/+2
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04dt-bindings: serial: 8250: Add aspeed,sirq-polarity-sense.Oskar Senft1-0/+5
Add documentation for 8250_aspeed_vuart's aspeed,sirq-polarity-sense property that enables to auto-configure the VUART's SIRQ polarity. Signed-off-by: Oskar Senft <osk@google.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20190905144130.220713-2-osk@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04dt-bindings: serial: sh-sci: Document r8a774b1 bindingsBiju Das1-0/+2
RZ/G2N (R8A774B1) SoC also has the R-Car Gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1568724324-26995-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19Merge tag 'devicetree-for-5.4' of ↵Linus Torvalds2-38/+73
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...
2019-09-18Merge tag 'tty-5.4-rc1' of ↵Linus Torvalds5-34/+127
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-05serial: tegra: DT for Adjusted baud ratesKrishna Yarlagadda1-0/+32
Tegra186 chip has a hardware issue resulting in frame errors when tolerance level for baud rate is negative. Provided entries to adjust baud rate to be within acceptable range and work with devices that can send negative baud rate. Also report error when baud rate set is out of tolerance range of controller updated in device tree. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-10-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05dt-binding: serial: tegra: add new chipsKrishna Yarlagadda1-1/+6
Add new compatible string for Tegra186. It differs from earlier chips as it has FIFO mode enable check and 8 byte DMA buffer. Add new compatible string for Tegra194. Tegra194 has different error tolerance levels for baud rate compared to older chips. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-6-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05dt-bindings: serial: Convert riscv,sifive-serial to json-schemaPragnesh Patel2-33/+62
Convert the riscv,sifive-serial binding to DT schema using json-schema. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1567592383-8920-1-git-send-email-pragnesh.patel@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04dt-bindings: serial: Document Freescale LINFlexD UARTStoica Cosmin-Stefan1-0/+22
Add documentation for the serial communication interface module (LINFlexD), found in two instances on S32V234. Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com> Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20190823191115.18490-7-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04dt-bindings: serial: stm32: add wakeup optionErwan Le Ray1-0/+5
Add a note for enabling wakeup capabilities of usart Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1560433800-12255-2-git-send-email-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-08 00:47:22 +0000