summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-05dt-bindings: i2c: Add Mediatek MT7629 i2c bindingqii wang1-0/+1
Add MT7629 i2c binding to binding file. Signed-off-by: qii wang <qii.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: Add DT bindings for Xscale I2C mastersLinus Walleij1-0/+20
This adds a device tree binding for Intel XScale I2C masters. We define compatible strings for the iop3xx and ixp4xx chip families. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-05Merge branch 'i2c/for-5.0' of ↵Linus Torvalds8-7/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has only driver updates for you this time. Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups. STM32F7 got FastMode+ and PM support, Axxia some reliabilty improvements" * 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: Add Actions Semiconductor Owl family S700 I2C support dt-bindings: i2c: Add S700 support for Actions Semi Soc's i2c: ismt: Add support for Intel Cedar Fork i2c: tegra: Switch to SPDX identifier i2c: tegra: Add missing kerneldoc for some fields i2c: tegra: Cleanup kerneldoc comments i2c: axxia: support sequence command mode dt-bindings: i2c: rcar: Add r8a774c0 support dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. i2c: powermac: Use of_node_name_eq for node name comparisons i2c-axxia: check for error conditions first i2c-axxia: dedicated function to set client addr dt-bindings: i2c: Use correct vendor prefix for Atmel i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR eeprom: at24: add support for 24c2048 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string i2c: i2c-stm32f7: add PM Runtime support i2c: sh_mobile: add support for r8a77990 (R-Car E3) ...
2019-01-03dt-bindings: i2c: Add S700 support for Actions Semi Soc'sParthiban Nallathambi1-1/+3
Add s700 compatible string to Actions Semi SoC dt-bindings. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-28Merge tag 'devicetree-for-4.21' of ↵Linus Torvalds2-46/+73
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...
2018-12-17dt-bindings: i2c: rcar: Add r8a774c0 supportFabrizio Castro1-0/+1
Document RZ/G2E (R8A774C0) I2C compatibility with the relevant device dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17dt-bindings: i2c: sh_mobile: Add r8a774c0 supportFabrizio Castro1-4/+5
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-13dt-bindings: i2c: Convert i2c-gpio binding to json-schemaRob Herring2-46/+73
Convert the i2c-gpio binding to DT schema format using json-schema. This serves as an example of how to include other schema (i2c-controller.yaml in this case). Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-11dt-bindings: i2c: Use correct vendor prefix for AtmelThierry Reding4-5/+5
The "at," prefix was never correct for Atmel, so fix the few occurrences that got it wrong. Use "atmel," instead. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Peter Rosin <peda@axentia.se> [wsa: merged two patches into one, dropped 'trivial-devices' hunk which needs to go in seperately] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-02dt-bindings: i2c: Add P8 OCC hwmon device documentationEddie James1-0/+25
Document the bindings for I2C-based OCC hwmon device. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-27i2c: sh_mobile: document support for r8a77990 (R-Car E3)Simon Horman1-1/+8
Document support for the IIC code for the r8a77990 (R-Car E3). It is not considered compatible with existing fallback bindings due to the documented absence of automatic transmission registers. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-27dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7Pierre-Yves MORDRET1-0/+6
Append optional bindings to update SYSCFG Fast Mode Plus bits if Fast Mode Plus speed is selected. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09dt-bindings: i2c: omap: Add new compatible for AM654 SoCsVignesh R1-2/+6
AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle AM654 SoCs. While at that reformat the existing compatible list for older SoCs to list one valid compatible per line. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-31dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible stringA.s. Dong1-0/+1
Add imx8qxp compatible string Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-29Merge branch 'i2c/for-4.20' of ↵Linus Torvalds3-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has not so much stuff this time. Mostly driver enablement for new SoCs, some driver bugfixes, and some cleanups" * 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits) MAINTAINERS: add maintainer for Renesas RIIC driver i2c: sh_mobile: Remove dummy runtime PM callbacks i2c: uniphier-f: fix race condition when IRQ is cleared i2c: uniphier-f: fix occasional timeout error i2c: uniphier-f: make driver robust against concurrency i2c: i2c-qcom-geni: Simplify irq handler i2c: i2c-qcom-geni: Simplify tx/rx functions i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers i2c: mux: mlxcpld: simplify code to reach the adapter i2c: mux: ltc4306: simplify code to reach the adapter i2c: mux: pca954x: simplify code to reach the adapter i2c: core: remove level of indentation in i2c_transfer i2c: core: remove outdated DEBUG output i2c: zx2967: use core to detect 'no zero length' quirk i2c: tegra: use core to detect 'no zero length' quirk i2c: qup: use core to detect 'no zero length' quirk i2c: omap: use core to detect 'no zero length' quirk i2c: Convert to using %pOFn instead of device_node.name i2c: brcmstb: Allow enabling the driver on DSL SoCs eeprom: at24: fix unexpected timeout under high load ...
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-05Merge tag 'at24-4.20-updates-for-wolfram' of ↵Wolfram Sang1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.20 AT24 updates for 4.20 Single patch from Wang Xin improving the read/write loop in at24 under high load.
2018-10-01dt-bindings: i2c: sh_mobile: Document r8a7744 supportBiju Das1-0/+1
Document i2c Device Tree support for RZ/G1N (R8A7744) SoC, which is compatible with R-Car Gen2 SoC family. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-01dt-bindings: i2c: rcar: Document r8a7744 supportBiju Das1-0/+1
Document i2c Device Tree support for RZ/G1N (R8A7744) SoC, which is compatible with R-Car Gen2 SoC family. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-01dt-bindings: i2c: rcar: Add r8a77470 supportFabrizio Castro1-0/+1
Although the I2C IP found in the RZ/G1C is not exactly the same as the one found in the R-Car Gen2 family or R-Car Gen3 family, it can still be considered as compatible with R-Car Gen2 from a software perpective. This patch therefore documents the SoC specific compatible string, and the compatibility with Gen2 fallback is retained. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-09-26dt-bindings: i2c: Fix SMBus typosim manseop1-1/+1
Fix typo 'SMbus' to 'SMBus' Signed-off-by: sim manseop <semtax33@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-02dt-bindings: i2c: designware: document MSCC Ocelot bindingsAlexandre Belloni1-1/+6
Document bindings for the Microsemi Ocelot integration of the Designware I2C controller. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-09-02dt-bindings: imx-lpi2c: Remove mx8dv compatible entryFabio Estevam1-2/+1
mx8dv never entered into production and there is no other place in the kernel referring to this SoC, so remove it from the dt bindings documentation. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds4-2/+74
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20dt-bindings: i2c: rcar: Add r8a774a1 supportFabrizio Castro1-1/+3
Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-20dt-bindings: i2c: sh_mobile: Add r8a774a1 supportFabrizio Castro1-1/+3
Document RZ/G2M (R8A774A1) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-04dt-bindings: i2c: Add binding for Actions Semiconductor Owl I2C controllerManivannan Sadhasivam1-0/+27
Add devicetree binding for Actions Semiconductor Owl I2C controller Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring9-21/+0
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-21i2c: rcar: Add compatible support for r8a77990 (R-Car E3)Hiromitsu Yamasaki1-0/+1
This patch adds compatible string support for the Renesas R-Car E3 (r8a77990) SoC. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-21dt-bindings: i2c: Add FSI-attached I2C master dt binding documentationEddie James1-0/+40
Document the bindings. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: rcar: document R8A77980 bindingsSergei Shtylyov1-0/+1
R-Car V3H (R8A77980) SoC also has the R-Car gen3 compatible I2C controller, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-15dt-bindings: i2c: fix typo 'can by' to 'can be'Wolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30i2c: s3c2410: Remove support for Exynos5440Krzysztof Kozlowski1-3/+1
The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-04dt-bindings: i2c: add binding for Socionext SynQuacer I2CArd Biesheuvel1-0/+29
Add a binding for the I2C controller that can be found in the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24dt-bindings: i2c: document R8A77965 bindingsWolfram Sang1-0/+1
R-Car M3-N (R8A77965) SoC has a R-Car Gen3-compatible I2C controller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-27dt-bindings: i2c: sh_mobile: Document R-Car M3-N supportGeert Uytterhoeven1-0/+1
Document support for the IIC Bus Interface for DVFS (IIC for DVFS) in the Renesas M3-N (r8a77965) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-26dt-bindings: i2c: document R8A77995 bindingsUlrich Hecht1-0/+1
R-Car D3 (R8A77995) SoC has a R-Car Gen3-compatible I2C controller. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-04Merge branch 'i2c/for-4.16' of ↵Linus Torvalds4-3/+37
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has the following changes for you: - new flag to mark DMA safe buffers in i2c_msg. Also, some infrastructure around it. And docs. - huge refactoring of the at24 driver led by the new maintainer Bartosz - update I2C bus recovery to send STOP after recovery - conversion from gpio to gpiod for I2C bus recovery - adding a fault-injector to the i2c-gpio driver - lots of small driver improvements, and bigger ones to i2c-sh_mobile" * 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits) i2c: mv64xxx: Add myself as maintainer for this driver i2c: mv64xxx: Fix clock resource by adding an optional bus clock i2c: mv64xxx: Remove useless test before clk_disable_unprepare i2c: mxs: use true and false for boolean values i2c: meson: update doc description to fix build warnings i2c: meson: add configurable divider factors dt-bindings: i2c: update documentation for the Meson-AXG i2c: imx-lpi2c: add runtime pm support i2c: rcar: fix some trivial typos in comments i2c: davinci: fix the cpufreq transition i2c: rk3x: add proper kerneldoc header i2c: rk3x: account for const type of of_device_id.data i2c: acorn: remove outdated path from file header i2c: acorn: add MODULE_LICENSE tag i2c: rcar: implement bus recovery i2c: send STOP after successful bus recovery i2c: ensure SDA is released in recovery if SDA is controllable i2c: add 'set_sda' to bus_recovery_info i2c: add identifier in declarations for i2c_bus_recovery i2c: make kerneldoc about bus recovery more precise ...
2018-01-26i2c: mv64xxx: Fix clock resource by adding an optional bus clockGregory CLEMENT1-0/+20
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24dt-bindings: i2c: update documentation for the Meson-AXGJian Hu1-1/+5
Update the doc to explicitly add Meson-AXG to support list Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-04dt-bindings: i2c: Add MediaTek MT2712 i2c bindingJun Gao1-0/+1
Add MT2712 i2c binding to binding file. Compare to MT8173 i2c controller, MT2712 has timing adjust registers which can adjust the internal divider of i2c source clock, SCL duty cycle, SCL compare point, start(repeated start) and stop time, SDA change time. Signed-off-by: Jun Gao <jun.gao@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-03Merge tag 'at24-4.16-updates-for-wolfram' of ↵Wolfram Sang1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.16 "AT24 updates for 4.16 merge window The driver has been converted to using regmap instead of raw i2c and smbus calls which shrank the code significantly. Device tree binding document has been cleaned up. Device tree support in the driver has been improved and we now support all at24 models as well as two new DT properties (no-read-rollover and wp-gpios). We no longer user unreadable magic values for driver data as the way it was implemented caused problems for some EEPROM models - we switched to regular structs. Aside from that, there's a bunch of coding style fixes and minor improvements all over the place."
2017-12-30i2c: mux: pca954x: add support for NXP PCA984x familyAdrian Fiergolski1-2/+11
This patch extends the current i2c-mux-pca954x driver and adds support for a newer PCA984x family of the I2C switches and multiplexers from NXP. Signed-off-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-26dt-bindings: Use lower case hex in unit-addressesRob Herring2-2/+2
DT unit addresses should be lower case hex. Fix all the binding examples. Converted with the following command from Krzysztof Kozlowski: sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt') Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06dt-bindings: Remove leading 0x from bindings notationMathieu Malaterre1-1/+1
Improve the binding example by removing all the leading 0x to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Converted using the following command: find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} + This is a follow up to commit 48c926cd3414 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09dt-bindings: Remove leading zeros from bindings notationMarco Franchi2-2/+2
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-06i2c: aspeed: Deassert reset in probeJoel Stanley1-2/+5
In order to use i2c from a cold boot, the i2c peripheral must be taken out of reset. We request a shared reset controller each time a bus driver is loaded, as the reset is shared between the 14 i2c buses. On remove the reset is asserted, which only touches the hardware once the last i2c bus is removed. The reset is required as the I2C buses will not work without releasing the reset. Previously the driver only worked with out of tree hacks that released this reset before the driver was loaded. Update the device tree bindings to reflect this. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-01Merge branch 'i2c/sbs-manager' into i2c/for-4.15Wolfram Sang1-2/+2
2017-11-01Merge branch 'for-wolfram' of ↵Wolfram Sang1-9/+23
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into i2c/for-4.15 Refactor i2c-gpio and its users to use gpiod. Done by GPIO maintainer LinusW.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-09 20:10:07 +0000