summaryrefslogtreecommitdiffstats
path: root/Documentation/PCI
AgeCommit message (Collapse)AuthorFilesLines
2016-10-07Merge tag 'pci-v4.9-changes' of ↵Linus Torvalds1-17/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Summary of PCI changes for the v4.9 merge window: Enumeration: - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management: - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) - Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug: - Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug: - Rename pcie_isr() locals for clarity (Bjorn Helgaas) - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) - Remove unnecessary guard (Bjorn Helgaas) - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) - Clear attention LED on device add (Keith Busch) - Allow exclusive userspace control of indicators (Keith Busch) - Process all hotplug events before looking for new ones (Mayurkumar Patel) - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) - Make explicitly non-modular (Paul Gortmaker) Power management: - Afford direct-complete to devices with non-standard PM (Lukas Wunner) - Query platform firmware for device power state (Lukas Wunner) - Recognize D3cold in pci_update_current_state() (Lukas Wunner) - Avoid unnecessary resume after direct-complete (Lukas Wunner) - Make explicitly non-modular (Paul Gortmaker) Virtualization: - Mark Atheros AR9580 to avoid bus reset (Maik Broemme) - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI: - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER: - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) - Fix aer_probe() kernel-doc comment (Cao jin) - Add bus flag to skip source ID matching (Jon Derrick) - Avoid memory allocation in interrupt handling path (Jon Derrick) - Cache capability position (Keith Busch) - Make explicitly non-modular (Paul Gortmaker) - Remove duplicate AER severity translation (Tyler Baicar) - Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement: - Add Precision Time Measurement (PTM) support (Jonathan Yong) - Add PTM clock granularity information (Bjorn Helgaas) - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver: - Remove redundant platform_get_resource() return value check (Bjorn Helgaas) - Poll for link training status after retraining the link (Ley Foon Tan) - Rework config accessors for use without a struct pci_bus (Ley Foon Tan) - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) - Make MSI explicitly non-modular (Paul Gortmaker) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver: - Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver: - Add quirk for AER to ignore source ID (Jon Derrick) - Allocate IRQ lists with correct MSI-X count (Jon Derrick) - Convert to use pci_alloc_irq_vectors() API (Jon Derrick) - Eliminate vmd_vector member from list type (Jon Derrick) - Eliminate index member from IRQ list (Jon Derrick) - Synchronize with RCU freeing MSI IRQ descs (Keith Busch) - Request userspace control of PCIe hotplug indicators (Keith Busch) - Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver: - Use zero-length array in struct pci_packet (Dexuan Cui) - Use pci_function_description[0] in struct definitions (Dexuan Cui) - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) - Handle hv_pci_generic_compl() error case (Dexuan Cui) - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant _data suffix (Thierry Reding) - Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver: - Consolidate register space lookup and ioremap (Bjorn Helgaas) - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) - Add multi-MSI support (Grigory Kletsko) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Fix some checkpatch warnings (Sergei Shtylyov) - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver: - Add DT bindings for Rockchip PCIe controller (Shawn Lin) - Add Rockchip PCIe controller support (Shawn Lin) - Improve the deassert sequence of four reset pins (Shawn Lin) - Fix wrong transmitted FTS count (Shawn Lin) - Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver: - Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver: - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) - Check LTSSM training bit before deciding link is up (Jisheng Zhang) - Move link wait definitions to .c file (Joao Pinto) - Wait for iATU enable (Joao Pinto) - Add iATU Unroll feature (Joao Pinto) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) - Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver: - Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver: - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) - Clear correct MSI set bit (Bharat Kumar Gogada) - Dispose of MSI virtual IRQ (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver: - Expand error logging (Bharat Kumar Gogada) - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) Miscellaneous: - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) - portdrv: Make explicitly non-modular (Paul Gortmaker) - Make DPC explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits) x86/PCI: VMD: Move VMD driver to drivers/pci/host PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI/AER: Fix aer_probe() kernel-doc comment PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list ...
2016-10-05Merge branch 'pci/host-vmd' into nextBjorn Helgaas1-14/+10
* pci/host-vmd: x86/PCI: VMD: Move VMD driver to drivers/pci/host x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list x86/PCI: VMD: Eliminate vmd_vector member from list type x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2016-09-14PCI/AER: Remove aerdriver.forceload kernel parameterBjorn Helgaas1-13/+9
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must not use AER unless _OSC is present and _OSC grants AER control to the OS. The aerdriver.forceload kernel parameter was a way to enable Linux AER support on ACPI systems that lack _OSC or fail to grant control the the OS. Enabling Linux AER support when the firmware doesn't want us to is a recipe for problems, e.g., the firmware might be handling AER itself. Remove the aerdriver.forceload kernel parameter and related supporting code. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14PCI/AER: Remove aerdriver.nosourceid kernel parameterBjorn Helgaas1-4/+0
The aerdriver.nosourceid kernel parameter was intended for working around broken chipsets don't supply the source ID for AER events. We recently added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same purpose. Remove the aerdriver.nosourceid kernel parameter. For anything other than debugging, asking users to find and use kernel parameters is a poor user experience. Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any hardware that needs it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-01treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLEJoe Perches1-1/+0
It's been eliminated from the sources, remove it from everywhere else. Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-16PCI: Use positive flags in pci_alloc_irq_vectors()Christoph Hellwig1-14/+10
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of certain interrupt types, pass positive flags like PCI_IRQ_LEGACY, PCI_IRQ_MSI, etc., to specify the acceptable interrupt types. This is based on a number of pending driver conversions that just happend to be a whole more obvious to read this way, and given that we have no users in the tree yet it can still easily be done. I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting all interrupt types very simple. [bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of PCI_IRQ_NOLEGACY] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Spread interrupt vectors in pci_alloc_irq_vectors()Christoph Hellwig1-0/+4
Set the affinity_mask in the PCI device before allocating vectors so that the affinity can be propagated through the MSI descriptor structures to the core IRQ code. To facilitate this, new __pci_enable_msi_range() and __pci_enable_msix_range() helpers are factored out of their not prefixed variants which assigning the new IRQ affinity mask in the PCI device so that the low-level interrupt code can perform the interrupt affinity assignment and do node-local allocations. A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that this function can also be used by drivers that don't wish to use the automatic affinity assignment. [bhelgaas: omit "else" after "return" consistently] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Provide sensible IRQ vector alloc/free routinesChristoph Hellwig1-391/+76
Add a function to allocate and free a range of interrupt vectors, using MSI-X, MSI or legacy vectors (in that order) based on the capabilities of the underlying device and PCIe complex. Additionally a new helper is provided to get the Linux IRQ number for given device-relative vector so that the drivers don't need to allocate their own arrays to keep track of the vectors for the multi vector MSI-X case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2015-04-18Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6Linus Torvalds3-18/+9
Pull documentation updates from Jonathan Corbet: "Numerous fixes, the overdue removal of the i2o docs, some new Chinese translations, and, hopefully, the README fix that will end the flow of identical patches to that file" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (34 commits) Documentation/memcg: update memcg/kmem status Documentation: blackfin: Makefile: Typo building issue Documentation/vm/pagemap.txt: correct location of page-types tool Documentation/memory-barriers.txt: typo fix doc: Add guest_nice column to example output of `cat /proc/stat' Documentation/kernel-parameters: Move "eagerfpu" to its right place Documentation: gpio: Update ACPI part of the document to mention _DSD docs/completion.txt: Various tweaks and corrections doc: completion: context, scope and language fixes Documentation:Update Documentation/zh_CN/arm64/memory.txt Documentation:Update Documentation/zh_CN/arm64/booting.txt Documentation: Chinese translation of arm64/legacy_instructions.txt DocBook media: fix broken EIA hyperlink Documentation: tweak the maintainers entry README: Change gzip/bzip2 to xz compression format README: Update version number reference doc:pci: Fix typo in Documentation/PCI Documentation: drm: Use '->' when describing access through pointers. Documentation: Remove mentioning of block barriers Documentation/email-clients.txt: Fix one grammar mistake, add extra info about TB ...
2015-04-09PCI: Clarify policy for vendor IDs in pci.txtMichael S. Tsirkin1-6/+6
Clarify pci.txt so it matches the "do not add new entries unless they are shared between multiple drivers" comment in include/linux/pci_ids.h. [bhelgaas: changelog, strengthen language] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-20doc:pci: Fix typo in Documentation/PCIMasanari Iida3-6/+6
This patch fix spelling typo in Documentation/PCI. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20MSI-HOWTO.txt: remove reference on IRQF_DISABLEDValentin Rothberg1-12/+3
The IRQF_DISABLED is a NOOP and scheduled to be removed. According to Ingo Molnar in commit e58aa3d2d0cc01ad8d6f7f640a0670433f794922 (genirq: Run irq handlers with interrupts disabled), running IRQ handlers with interrupts enabled can cause stack overflows when the interrupt line of the issuing device is still active. This patch removes IRQF_DISABLED from this documentation. It was mentioned to be a solution to avoid deadlocks when a device uses multiple interrupts. As the flag is a NOOP this solution does not work anymore. Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-06-19doc: replace "practise" with "practice" in DocumentationJeremiah Mahler1-1/+1
To keep the Documentation consistent either "practise" or "practice" should be used. Since there are 3 lines with "practise" ~/linux/Documentation$ grep -r practise * | wc -l 3 and 108 lines with "practice" ~/linux/Documentation$ grep -r practice * | wc -l 108 this patch converts "practise" to "practice". Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-20Merge branch 'pci/dead-code' into nextBjorn Helgaas1-4/+0
* pci/dead-code: PCI: Remove unused SR-IOV VF Migration support iommu/amd: Add include of <linux/irqreturn.h> mei: Add include of <linux/irqreturn.h> misc: mic: Add include of <linux/irqreturn.h>
2014-02-19PCI: Remove unused SR-IOV VF Migration supportBjorn Helgaas1-4/+0
This reverts commit 74bb1bcc7dbb ("PCI: handle SR-IOV Virtual Function Migration"), removing this exported interface: pci_sriov_migration() Since pci_sriov_migration() is unused, it is impossible to schedule sriov_migration_task() or use any of the other migration infrastructure. This is based on Stephen Hemminger's patch (see link below), but goes a bit further. Link: http://lkml.kernel.org/r/20131227132710.7190647c@nehalam.linuxnetplumber.net Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Stephen Hemminger <stephen@networkplumber.org>
2014-02-13PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()Alexander Gordeev1-2/+84
The new functions are special cases for pci_enable_msi_range() and pci_enable_msix_range() when a particular number of MSI or MSI-X is needed. By contrast with pci_enable_msi_range() and pci_enable_msix_range() functions, pci_enable_msi_exact() and pci_enable_msix_exact() return zero in case of success, which indicates MSI or MSI-X interrupts have been successfully allocated. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13PCI/MSI: Fix cut-and-paste errors in documentationAlexander Gordeev1-6/+6
Function pci_enable_msi_range() is used in examples where pci_enable_msix_range() should have been used instead. Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-03PCI/MSI: Add pci_enable_msi() documentation backAlexander Gordeev1-3/+20
We deprecated pci_enable_msi() in 302a2523c277 ("PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()"). But we changed our minds after noticing that: - pci_enable_msi() doesn't have confusing return values like pci_enable_msi_block() and pci_enable_msix() did, and - pci_enable_msi() has a hundred or so callers that we don't want to change. This adds back the pci_enable_msi() documentation. [bhelgaas: changelog] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-07Merge branch 'pci/msi' into nextBjorn Helgaas1-98/+210
* pci/msi: PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range() PCI/MSI: Add pci_msix_vec_count() PCI/MSI: Remove pci_enable_msi_block_auto() PCI/MSI: Add pci_msi_vec_count()
2014-01-07Merge branch 'pci/misc' into nextBjorn Helgaas1-2/+2
* pci/misc: PCI: Update documentation 00-INDEX file PCI: Convert ioapic to be builtin only, not modular
2014-01-07PCI: Update documentation 00-INDEX fileErik Ekman1-2/+2
The PCI-DMA-mapping.txt moved to general docs and became DMA-API-HOWTO.txt in 5e07c2c7301b ("Documentation: rename PCI/PCI-DMA-mapping.txt to DMA-API-HOWTO.txt"). Add new file about PCI Express I/O Virtualization. Signed-off-by: Erik Ekman <erik@kryo.se> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-03PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()Alexander Gordeev1-75/+186
This adds pci_enable_msi_range(), which supersedes the pci_enable_msi() and pci_enable_msi_block() MSI interfaces. It also adds pci_enable_msix_range(), which supersedes the pci_enable_msix() MSI-X interface. The old interfaces have three categories of return values: negative: failure; caller should not retry positive: failure; value indicates number of interrupts that *could* have been allocated, and caller may retry with a smaller request zero: success; at least as many interrupts allocated as requested It is error-prone to handle these three cases correctly in drivers. The new functions return either a negative error code or a number of successfully allocated MSI/MSI-X interrupts, which is expected to lead to clearer device driver code. pci_enable_msi(), pci_enable_msi_block() and pci_enable_msix() still exist unchanged, but are deprecated and may be removed after callers are updated. [bhelgaas: tweak changelog] Suggested-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2014-01-03PCI/MSI: Add pci_msix_vec_count()Alexander Gordeev1-0/+13
This creates an MSI-X counterpart for pci_msi_vec_count(). Device drivers can use this function to obtain maximum number of MSI-X interrupts the device supports and use that number in a subsequent call to pci_enable_msix(). pci_msix_vec_count() supersedes pci_msix_table_size() and returns a negative errno if device does not support MSI-X interrupts. After this update, callers must always check the returned value. The only user of pci_msix_table_size() was the PCI-Express port driver, which is also updated by this change. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2014-01-03PCI/MSI: Remove pci_enable_msi_block_auto()Alexander Gordeev1-33/+6
The new pci_msi_vec_count() interface makes pci_enable_msi_block_auto() superfluous. Drivers can use pci_msi_vec_count() to learn the maximum number of MSIs supported by the device, and then call pci_enable_msi_block(). pci_enable_msi_block_auto() was introduced recently, and its only user is the AHCI driver, which is also updated by this change. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2014-01-03PCI/MSI: Add pci_msi_vec_count()Alexander Gordeev1-0/+15
Device drivers can use this interface to obtain the maximum number of MSI interrupts the device supports and use that number, e.g., in a subsequent call to pci_enable_msi_block(). Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2013-12-20Merge branch 'pci/misc' into nextBjorn Helgaas1-2/+4
* pci/misc: PCI/checkpatch: Deprecate DEFINE_PCI_DEVICE_TABLE
2013-12-20PCI/MSI: Make pci_enable_msi/msix() 'nvec' argument type as intAlexander Gordeev1-1/+1
Make pci_enable_msi_block(), pci_enable_msi_block_auto() and pci_enable_msix() consistent with regard to the type of 'nvec' argument. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2013-12-13PCI/checkpatch: Deprecate DEFINE_PCI_DEVICE_TABLEJoe Perches1-2/+4
Prefer use of the direct definition of struct pci_device_id instead of indirection via macro DEFINE_PCI_DEVICE_TABLE. Update the PCI documentation to deprecate DEFINE_PCI_DEVICE_TABLE. Update checkpatch adding --fix option. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2013-09-25PCI: Update pci_find_slot() description in pci.txtYijing Wang1-3/+5
pci_find_slot() has been removed from the kernel. Document its closest replacement, pci_get_domain_bus_and_slot(), instead. [bhelgaas: fix indentation, keep mention in "obsolete" section] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-24PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()Alexander Gordeev1-5/+32
The new function pci_enable_msi_block_auto() tries to allocate maximum possible number of MSIs up to the number the device supports. It generalizes a pattern when pci_enable_msi_block() is contiguously called until it succeeds or fails. Opposite to pci_enable_msi_block() which takes the number of MSIs to allocate as a input parameter, pci_enable_msi_block_auto() could be used by device drivers to obtain the number of assigned MSIs and the number of MSIs the device supports. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c3de2419df94a0f95ca1a6f755afc421486455e6.1353324359.git.agordeev@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-03Documentation: remove __dev* attributes.Greg Kroah-Hartman2-23/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from the kernel documentation. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: SRIOV control and status via sysfs (documentation)Donald Dutile1-4/+44
Add documentation of new sysfs files and new pci_driver SRIOV configuration interface. [bhelgaas: changelog] Signed-off: Donald Dutile <ddutile@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2011-09-27doc: fix broken referencesPaul Bolle1-1/+1
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-02Docs: MSI-HOWTO: MSI -> MSIsMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Insert a commaMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: can -> couldMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.'Michael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: may -> mightMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Insert a commaMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: API -> functionMichael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: , -> ;Michael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Move a sentence to another paragraphMichael Witten1-4/+3
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Insert `that'Michael Witten1-1/+1
... as per Randy Dunlap's wishes :-P Message-Id: <20110717114023.2b4cce91.rdunlap@xenotime.net> Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet' for emphasisMichael Witten1-3/+3
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Put the `because' subordinate clause firstMichael Witten1-4/+4
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Streamline some wordingMichael Witten1-2/+2
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: `asked for' -> `requested'Michael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Use present tense and streamline some wordingMichael Witten1-22/+22
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-08-02Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may'Michael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@gmail.com> Acked-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>