| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for the time(r) subsystem:
Core:
- Make the clocksource watchdog more robust by better validation
checks of the measurement.
Drivers:
- New drivers for MStar and SSD20xd SOCs
- The usual cleanups and improvements all over the place"
* tag 'timers-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: Add Mstar MSC313e timer devicetree bindings documentation
clocksource/drivers/msc313e: Add support for ssd20xd-based platforms
clocksource/drivers: Add MStar MSC313e timer support
clocksource/drivers/pistachio: Fix -Wunused-but-set-variable warning
clocksource/drivers/timer-imx-sysctr: Set cpumask to cpu_possible_mask
clocksource/drivers/imx-sysctr: Mark two variable with __ro_after_init
clocksource/drivers/renesas,ostm: Make RENESAS_OSTM symbol visible
clocksource/drivers/renesas-ostm: Add RZ/G2L OSTM support
dt-bindings: timer: renesas: ostm: Document Renesas RZ/G2L OSTM
clocksource/drivers/exynos_mct: Fix silly typo resulting in checkpatch warning
clocksource: Reduce the default clocksource_watchdog() retries to 2
clocksource: Avoid accidental unstable marking of clocksources
dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
reset: Add of_reset_control_get_optional_exclusive()
clocksource/drivers/exynos_mct: Refactor resources allocation
dt-bindings: timer: remove rockchip,rk3066-timer compatible string from rockchip,rk-timer.yaml
dt-bindings: timer: cadence_ttc: Add power-domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Provide a new interface for affinity hints to provide a separation
between hint and actual affinity change which has become a hidden
property of the current interface
- Fix up the in tree usage of the affinity hint interfaces
Drivers:
- No new irqchip drivers!
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes"
* tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
irqchip/ingenic-tcu: Use correctly sized arguments for bit field
irqchip/gic-v2m: Add const to of_device_id
irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init
irqchip/spear-shirq: Add support for IRQ 0..6
irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime
irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve
irqchip/gic-v3-its: Give the percpu rdist struct its own flags field
net/mlx4: Use irq_update_affinity_hint()
net/mlx5: Use irq_set_affinity_and_hint()
hinic: Use irq_set_affinity_and_hint()
scsi: lpfc: Use irq_set_affinity()
mailbox: Use irq_update_affinity_hint()
ixgbe: Use irq_update_affinity_hint()
be2net: Use irq_update_affinity_hint()
enic: Use irq_update_affinity_hint()
RDMA/irdma: Use irq_update_affinity_hint()
scsi: mpt3sas: Use irq_set_affinity_and_hint()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Nothing major is happening here"
* tag 'leds-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: lp55xx: initialise output direction from dts
ARM: dts: omap3-n900: Fix lp5523 for multi color
leds: ktd2692: Drop calling dev_of_node() in ktd2692_parse_dt
leds: lgm-sso: Get rid of duplicate of_node assignment
leds: tca6507: Get rid of duplicate of_node assignment
leds: leds-fsg: Drop FSG3 LED driver
leds: lp50xx: remove unused variable
dt-bindings: leds: Replace moonlight with indicator in mt6360 example
leds: led-core: Update fwnode with device_set_node
leds: tca6507: use swap() to make code cleaner
leds: Add mt6360 driver
dt-bindings: leds: Add bindings for MT6360 LED
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a fix for the Xen gntdev driver
- a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
being located above 4GB
- a series for support of mapping other guest's memory by using zone
device when running as Xen guest on Arm
* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
dt-bindings: xen: Clarify "reg" purpose
arm/xen: Read extended regions from DT and init Xen resource
xen/unpopulated-alloc: Add mechanism to use Xen resource
xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
xen/gntdev: fix unmap notification order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Identity domain support for virtio-iommu
- Move flush queue code into iommu-dma
- Some fixes for AMD IOMMU suspend/resume support when x2apic is used
- Arm SMMU Updates from Will Deacon:
- Revert evtq and priq back to their former sizes
- Return early on short-descriptor page-table allocation failure
- Fix page fault reporting for Adreno GPU on SMMUv2
- Make SMMUv3 MMU notifier ops 'const'
- Numerous new compatible strings for Qualcomm SMMUv2 implementations
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (38 commits)
iommu/iova: Temporarily include dma-mapping.h from iova.h
iommu: Move flush queue data into iommu_dma_cookie
iommu/iova: Move flush queue code to iommu-dma
iommu/iova: Consolidate flush queue code
iommu/vt-d: Use put_pages_list
iommu/amd: Use put_pages_list
iommu/amd: Simplify pagetable freeing
iommu/iova: Squash flush_cb abstraction
iommu/iova: Squash entry_dtor abstraction
iommu/iova: Fix race between FQ timeout and teardown
iommu/amd: Fix typo in *glues … together* in comment
iommu/vt-d: Remove unused dma_to_mm_pfn function
iommu/vt-d: Drop duplicate check in dma_pte_free_pagetable()
iommu/vt-d: Use bitmap_zalloc() when applicable
iommu/amd: Remove useless irq affinity notifier
iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume
iommu/amd: X2apic mode: setup the INTX registers on mask/unmask
iommu/amd: X2apic mode: re-enable after resume
iommu/amd: Restore GA log/tail pointer on host resume
iommu/iova: Move fast alloc size roundup into alloc_iova_fast()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The highlight is initial support for CXL memory hotplug. The static
NUMA node (ACPI SRAT Physical Address to Proximity Domain) information
known to platform firmware is extended to support the potential
performance-class / memory-target nodes dynamically created from
available CXL memory device capacity.
New unit test infrastructure is added for validating health
information payloads.
Fixes to module reload stress and stack usage from exposure in -next
are included. A symbol rename and some other miscellaneous fixups are
included as well.
Summary:
- Rework ACPI sub-table infrastructure to optionally be used outside
of __init scenarios and use it for CEDT.CFMWS sub-table parsing.
- Add support for extending num_possible_nodes by the potential
hotplug CXL memory ranges
- Extend tools/testing/cxl with mock memory device health information
- Fix a module-reload workqueue race
- Fix excessive stack-frame usage
- Rename the driver context data structure from "cxl_mem" since that
name collides with a proposed driver name
- Use EXPORT_SYMBOL_NS_GPL instead of -DDEFAULT_SYMBOL_NAMESPACE at
build time"
* tag 'cxl-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core: Remove cxld_const_init in cxl_decoder_alloc()
cxl/pmem: Fix module reload vs workqueue state
ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT
cxl/test: Mock acpi_table_parse_cedt()
cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers
ACPI: Add a context argument for table parsing handlers
ACPI: Teach ACPI table parsing about the CEDT header format
ACPI: Keep sub-table parsing infrastructure available for modules
tools/testing/cxl: add mock output for the GET_HEALTH_INFO command
cxl/memdev: Remove unused cxlmd field
cxl/core: Convert to EXPORT_SYMBOL_NS_GPL
cxl/memdev: Change cxl_mem to a more descriptive name
cxl/mbox: Remove bad comment
cxl/pmem: Fix reference counting for delayed work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache rewrite from David Howells:
"This is a set of patches that rewrites the fscache driver and the
cachefiles driver, significantly simplifying the code compared to
what's upstream, removing the complex operation scheduling and object
state machine in favour of something much smaller and simpler.
The series is structured such that the first few patches disable
fscache use by the network filesystems using it, remove the cachefiles
driver entirely and as much of the fscache driver as can be got away
with without causing build failures in the network filesystems.
The patches after that recreate fscache and then cachefiles,
attempting to add the pieces in a logical order. Finally, the
filesystems are reenabled and then the very last patch changes the
documentation.
[!] Note: I have dropped the cifs patch for the moment, leaving local
caching in cifs disabled. I've been having trouble getting that
working. I think I have it done, but it needs more testing (there
seem to be some test failures occurring with v5.16 also from
xfstests), so I propose deferring that patch to the end of the
merge window.
WHY REWRITE?
============
Fscache's operation scheduling API was intended to handle sequencing
of cache operations, which were all required (where possible) to run
asynchronously in parallel with the operations being done by the
network filesystem, whilst allowing the cache to be brought online and
offline and to interrupt service for invalidation.
With the advent of the tmpfile capacity in the VFS, however, an
opportunity arises to do invalidation much more simply, without having
to wait for I/O that's actually in progress: Cachefiles can simply
create a tmpfile, cut over the file pointer for the backing object
attached to a cookie and abandon the in-progress I/O, dismissing it
upon completion.
Future work here would involve using Omar Sandoval's vfs_link() with
AT_LINK_REPLACE[1] to allow an extant file to be displaced by a new
hard link from a tmpfile as currently I have to unlink the old file
first.
These patches can also simplify the object state handling as I/O
operations to the cache don't all have to be brought to a stop in
order to invalidate a file. To that end, and with an eye on to writing
a new backing cache model in the future, I've taken the opportunity to
simplify the indexing structure.
I've separated the index cookie concept from the file cookie concept
by C type now. The former is now called a "volume cookie" (struct
fscache_volume) and there is a container of file cookies. There are
then just the two levels. All the index cookie levels are collapsed
into a single volume cookie, and this has a single printable string as
a key. For instance, an AFS volume would have a key of something like
"afs,example.com,1000555", combining the filesystem name, cell name
and volume ID. This is freeform, but must not have '/' chars in it.
I've also eliminated all pointers back from fscache into the network
filesystem. This required the duplication of a little bit of data in
the cookie (cookie key, coherency data and file size), but it's not
actually that much. This gets rid of problems with making sure we keep
netfs data structures around so that the cache can access them.
These patches mean that most of the code that was in the drivers
before is simply gone and those drivers are now almost entirely new
code. That being the case, there doesn't seem any particular reason to
try and maintain bisectability across it. Further, there has to be a
point in the middle where things are cut over as there's a single
point everything has to go through (ie. /dev/cachefiles) and it can't
be in use by two drivers at once.
ISSUES YET OUTSTANDING
======================
There are some issues still outstanding, unaddressed by this patchset,
that will need fixing in future patchsets, but that don't stop this
series from being usable:
(1) The cachefiles driver needs to stop using the backing filesystem's
metadata to store information about what parts of the cache are
populated. This is not reliable with modern extent-based
filesystems.
Fixing this is deferred to a separate patchset as it involves
negotiation with the network filesystem and the VM as to how much
data to download to fulfil a read - which brings me on to (2)...
(2) NFS (and CIFS with the dropped patch) do not take account of how
the cache would like I/O to be structured to meet its granularity
requirements. Previously, the cache used page granularity, which
was fine as the network filesystems also dealt in page
granularity, and the backing filesystem (ext4, xfs or whatever)
did whatever it did out of sight. However, we now have folios to
deal with and the cache will now have to store its own metadata to
track its contents.
The change I'm looking at making for cachefiles is to store
content bitmaps in one or more xattrs and making a bit in the map
correspond to something like a 256KiB block. However, the size of
an xattr and the fact that they have to be read/updated in one go
means that I'm looking at covering 1GiB of data per 512-byte map
and storing each map in an xattr. Cachefiles has the potential to
grow into a fully fledged filesystem of its very own if I'm not
careful.
However, I'm also looking at changing things even more radically
and going to a different model of how the cache is arranged and
managed - one that's more akin to the way, say, openafs does
things - which brings me on to (3)...
(3) The way cachefilesd does culling is very inefficient for large
caches and it would be better to move it into the kernel if I can
as cachefilesd has to keep asking the kernel if it can cull a
file. Changing the way the backend works would allow this to be
addressed.
BITS THAT MAY BE CONTROVERSIAL
==============================
There are some bits I've added that may be controversial:
(1) I've provided a flag, S_KERNEL_FILE, that cachefiles uses to check
if a files is already being used by some other kernel service
(e.g. a duplicate cachefiles cache in the same directory) and
reject it if it is. This isn't entirely necessary, but it helps
prevent accidental data corruption.
I don't want to use S_SWAPFILE as that has other effects, but
quite possibly swapon() should set S_KERNEL_FILE too.
Note that it doesn't prevent userspace from interfering, though
perhaps it should. (I have made it prevent a marked directory from
being rmdir-able).
(2) Cachefiles wants to keep the backing file for a cookie open whilst
we might need to write to it from network filesystem writeback.
The problem is that the network filesystem unuses its cookie when
its file is closed, and so we have nothing pinning the cachefiles
file open and it will get closed automatically after a short time
to avoid EMFILE/ENFILE problems.
Reopening the cache file, however, is a problem if this is being
done due to writeback triggered by exit(). Some filesystems will
oops if we try to open a file in that context because they want to
access current->fs or suchlike.
To get around this, I added the following:
(A) An inode flag, I_PINNING_FSCACHE_WB, to be set on a network
filesystem inode to indicate that we have a usage count on the
cookie caching that inode.
(B) A flag in struct writeback_control, unpinned_fscache_wb, that
is set when __writeback_single_inode() clears the last dirty
page from i_pages - at which point it clears
I_PINNING_FSCACHE_WB and sets this flag.
This has to be done here so that clearing I_PINNING_FSCACHE_WB
can be done atomically with the check of PAGECACHE_TAG_DIRTY
that clears I_DIRTY_PAGES.
(C) A function, fscache_set_page_dirty(), which if it is not set,
sets I_PINNING_FSCACHE_WB and calls fscache_use_cookie() to
pin the cache resources.
(D) A function, fscache_unpin_writeback(), to be called by
->write_inode() to unuse the cookie.
(E) A function, fscache_clear_inode_writeback(), to be called when
the inode is evicted, before clear_inode() is called. This
cleans up any lingering I_PINNING_FSCACHE_WB.
The network filesystem can then use these tools to make sure that
fscache_write_to_cache() can write locally modified data to the
cache as well as to the server.
For the future, I'm working on write helpers for netfs lib that
should allow this facility to be removed by keeping track of the
dirty regions separately - but that's incomplete at the moment and
is also going to be affected by folios, one way or another, since
it deals with pages"
Link: https://lore.kernel.org/all/510611.1641942444@warthog.procyon.org.uk/
Tested-by: Dominique Martinet <asmadeus@codewreck.org> # 9p
Tested-by: kafs-testing@auristor.com # afs
Tested-by: Jeff Layton <jlayton@kernel.org> # ceph
Tested-by: Dave Wysochanski <dwysocha@redhat.com> # nfs
Tested-by: Daire Byrne <daire@dneg.com> # nfs
* tag 'fscache-rewrite-20220111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (67 commits)
9p, afs, ceph, nfs: Use current_is_kswapd() rather than gfpflags_allow_blocking()
fscache: Add a tracepoint for cookie use/unuse
fscache: Rewrite documentation
ceph: add fscache writeback support
ceph: conversion to new fscache API
nfs: Implement cache I/O by accessing the cache directly
nfs: Convert to new fscache volume/cookie API
9p: Copy local writes to the cache when writing to the server
9p: Use fscache indexing rewrite and reenable caching
afs: Skip truncation on the server of data we haven't written yet
afs: Copy local writes to the cache when writing to the server
afs: Convert afs to use the new fscache API
fscache, cachefiles: Display stat of culling events
fscache, cachefiles: Display stats of no-space events
cachefiles: Allow cachefiles to actually function
fscache, cachefiles: Store the volume coherency data
cachefiles: Implement the I/O routines
cachefiles: Implement cookie resize for truncate
cachefiles: Implement begin and end I/O operation
cachefiles: Implement backing file wrangling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix a regression introduced in 5.15
- Extend the size of the FUSE_INIT request to accommodate for more
flags. There's a slight possibility of a regression for obscure fuse
servers; if this happens, then more complexity will need to be added
to the protocol
- Allow the DAX property to be controlled by the server on a per-inode
basis in virtiofs
- Allow sending security context to the server when creating a file or
directory
* tag 'fuse-update-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
Documentation/filesystem/dax: DAX on virtiofs
fuse: mark inode DONT_CACHE when per inode DAX hint changes
fuse: negotiate per inode DAX in FUSE_INIT
fuse: enable per inode DAX
fuse: support per inode DAX in fuse protocol
fuse: make DAX mount option a tri-state
fuse: add fuse_should_enable_dax() helper
fuse: Pass correct lend value to filemap_write_and_wait_range()
fuse: send security context of inode on file
fuse: extend init flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF / reiserfs updates from Jan Kara:
"One UDF fix and one reiserfs cleanup"
* tag 'fs_for_v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix error handling in udf_new_inode()
reiserfs: don't use congestion_wait()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fanotify updates from Jan Kara:
"Support for new FAN_RENAME fanotify event and support for reporting
child info in directory fanotify events (FAN_REPORT_TARGET_FID)"
* tag 'fsnotify_for_v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: wire up FAN_RENAME event
fanotify: report old and/or new parent+name in FAN_RENAME event
fanotify: record either old name new name or both for FAN_RENAME
fanotify: record old and new parent and name in FAN_RENAME event
fanotify: support secondary dir fh and name in fanotify_info
fanotify: use helpers to parcel fanotify_info buffer
fanotify: use macros to get the offset to fanotify_info buffer
fsnotify: generate FS_RENAME event with rich information
fanotify: introduce group flag FAN_REPORT_TARGET_FID
fsnotify: separate mark iterator type from object type enum
fsnotify: clarify object type argument
|
|
Pull iomap updates from Matthew Wilcox:
"Convert xfs/iomap to use folios.
This should be all that is needed for XFS to use large folios. There
is no code in this pull request to create large folios, but no
additional changes should be needed to XFS or iomap once they are
created.
Usually this would have come from Darrick, and we had intended that it
would come that route. Between the holidays and various things which
Darrick needed to work on, he asked if I could send things directly.
There weren't any other iomap patches pending for this release, which
probably also played a role"
* tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux: (26 commits)
iomap: Inline __iomap_zero_iter into its caller
xfs: Support large folios
iomap: Support large folios in invalidatepage
iomap: Convert iomap_migrate_page() to use folios
iomap: Convert iomap_add_to_ioend() to take a folio
iomap: Simplify iomap_do_writepage()
iomap: Simplify iomap_writepage_map()
iomap,xfs: Convert ->discard_page to ->discard_folio
iomap: Convert iomap_write_end_inline to take a folio
iomap: Convert iomap_write_begin() and iomap_write_end() to folios
iomap: Convert __iomap_zero_iter to use a folio
iomap: Allow iomap_write_begin() to be called with the full length
iomap: Convert iomap_page_mkwrite to use a folio
iomap: Convert readahead and readpage to use a folio
iomap: Convert iomap_read_inline_data to take a folio
iomap: Use folio offsets instead of page offsets
iomap: Convert bio completions to use folios
iomap: Pass the iomap_page into iomap_set_range_uptodate
iomap: Add iomap_invalidate_folio
iomap: Convert iomap_releasepage to use a folio
...
|
|
Pull folio conversion updates from Matthew Wilcox:
"Convert much of the page cache to use folios
This stops just short of actually enabling large folios. It converts
everything that I noticed needs to be converted, but there may still
be places I've overlooked which still have page size assumptions.
The big change here is using large entries in the page cache XArray
instead of many small entries. That only affects shmem for now, but
it's a pretty big change for shmem since it changes where memory needs
to be allocated (at split time instead of insertion)"
* tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache: (49 commits)
mm: Use multi-index entries in the page cache
XArray: Add xas_advance()
truncate,shmem: Handle truncates that split large folios
truncate: Convert invalidate_inode_pages2_range to folios
fs: Convert vfs_dedupe_file_range_compare to folios
mm: Remove pagevec_remove_exceptionals()
mm: Convert find_lock_entries() to use a folio_batch
filemap: Return only folios from find_get_entries()
filemap: Convert filemap_get_read_batch() to use a folio_batch
filemap: Convert filemap_read() to use a folio
truncate: Add invalidate_complete_folio2()
truncate: Convert invalidate_inode_pages2_range() to use a folio
truncate: Skip known-truncated indices
truncate,shmem: Add truncate_inode_folio()
shmem: Convert part of shmem_undo_range() to use a folio
mm: Add unmap_mapping_folio()
truncate: Add truncate_cleanup_folio()
filemap: Add filemap_release_folio()
filemap: Use a folio in filemap_page_mkwrite
filemap: Use a folio in filemap_map_pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX/License update from Greg KH:
"Here is a single change that fixes up the description of the 'LGPL-2.1
or later' identifiers so that the tools properly acknowledge that this
is a valid license.
This change has been in linux-next for weeks with no reported problems"
* tag 'spdx-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 5.17-rc1.
Nothing major in here, just lots of good updates and fixes, including:
- more tty core cleanups from Jiri as well as mxser driver cleanups.
This is the majority of the core diffstat
- tty documentation updates from Jiri
- platform_get_irq() updates
- various serial driver updates for new features and hardware
- fifo usage for 8250 console, reducing cpu load a lot
- LED fix for keyboards, long-time bugfix that went through many
revisions
- minor cleanups
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
serial: core: Keep mctrl register state and cached copy in sync
serial: stm32: correct loop for dma error handling
serial: stm32: fix flow control transfer in DMA mode
serial: stm32: rework TX DMA state condition
serial: stm32: move tx dma terminate DMA to shutdown
serial: pl011: Drop redundant DTR/RTS preservation on close/open
serial: pl011: Drop CR register reset on set_termios
serial: pl010: Drop CR register reset on set_termios
serial: liteuart: fix MODULE_ALIAS
serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
tty: goldfish: Use platform_get_irq() to get the interrupt
serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
tty: serial: meson: Drop the legacy compatible strings and clock code
serial: pmac_zilog: Use platform_get_irq() to get the interrupt
serial: bcm63xx: Use platform_get_irq() to get the interrupt
serial: ar933x: Use platform_get_irq() to get the interrupt
serial: vt8500: Use platform_get_irq() to get the interrupt
serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
serial: pxa: Use platform_get_irq() to get the interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big set of staging driver updates for 5.17-rc1
Nothing major in here at all, just lots and lots of tiny cleanups.
Overall more code was removed than added, which is always nice, but
not a huge change.
Majority of the work happened in the r8188eu driver, that had hundreds
of cleanups happen on it, but almost all other staging drivers had
cleanups as well. No new functionality was added, cleanups only.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (308 commits)
staging: r8188eu: rename camelcase variable uintPeerChannel
staging: r8188eu: make BW20_24G_Diff a 1-D array
staging: r8188eu: make OFDM_24G_Diff a 1-D array
staging: r8188eu: BW40_24G_Diff is set but not used
staging: r8188eu: CCK_24G_Diff is set but not used
staging: r8188eu: make Index24G_BW40_Base a 1-D array
staging: r8188eu: make Index24G_CCK_Base a 1-D array
staging: r8188eu: rfPath is always 0
staging: r8188eu: remove unneeded parameter from rtl8188e_SetHalODMVar
staging: pi433: add comment to rx_lock mutex definition
staging: pi433: fix frequency deviation check
staging: vc04_services: rename BM2835 to BCM2835 in headers comments
staging: vc04_services: rename string literal containing bm2835_* to bcm2835*_
staging: vc04_services: rename variables containing bm2835_* to bcm2835_*
staging: vc04_services: rename functions containing bm2835_* to bcm2835_*
staging: vc04_services: rename structures bm2835_mmal_dev and bm2835_mmal_v4l2_ctrl
staging: greybus: audio: Check null pointer
staging: r8188eu: add spaces around P2P_AP_P2P_CH_SWITCH_PROCESS_WK
staging: r8188eu: turbo scan is always off for r8188eu
staging: r8188eu: cmd_issued_cnt is set but not used
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
|
|
Commit a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.
Fixes: a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to output")
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
output of dev_of_node() is already assigned to "np" variable in
ktd2692_parse_dt(). Use "np" variable to check if OF node is NULL
instead of calling dev_of_node() again.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Call graph:
--> sso_gpio_gc_init()
--> devm_gpiochip_add_data
--> devm_gpiochip_add_data_with_key
--> gpiochip_add_data_with_key()
--> of_gpio_dev_init()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Call graph:
--> tca6507_probe_gpios()
--> gpiochip_add_data()
--> gpiochip_add_data_with_key()
--> of_gpio_dev_init()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The board file using this driver has been deleted and the
FSG3 LEDs can be modeled using a system controller and some
register bit LEDs in the device tree so this driver is no
longer needed.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
During code review this unused variable was found. Remove it.
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Replace moonlight with indicator in mt6360 example to prevent the below
build error:
Error: Documentation/devicetree/bindings/leds/leds-mt6360.example.dts:114.24-25
syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385:
Documentation/devicetree/bindings/leds/leds-mt6360.example.dt.yaml]
Error 1
Link: https://lore.kernel.org/lkml/CAL_JsqJRMVE163LaHTbtFARc4f_qg33bfQx+sD3ukce_xQF+gA@mail.gmail.com/
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Gene Chen <gene_chen@richtek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Update a newly created device's fwnode and of_node pointers using the
recently added device_set_node helper. This keeps some firmware node
specifics out of led-class and should help tracking future changes
regarding device firmware node updates.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes at si2157 tuning logic
- a warning fix on atomisp when used with clang
* tag 'media/v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: si2157: add support for DVB-C Annex C
media: si2157: fix bandwidth stored in dev
media: si2157: fix 6MHz & 6.1MHz bandwidth setting
media: atomisp: Do not define input_system_cfg2400_t twice
|
|
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
moonlight LED.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fixes and improvements to dm btree and dm space map code in
persistent-data library used by thinp and cache.
- Update DM integrity to use struct_group() to zero struct
journal_sector.
- Update DM sysfs to use default_groups in kobj_type.
* tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm sysfs: use default_groups in kobj_type
dm integrity: Use struct_group() to zero struct journal_sector
dm space map common: add bounds check to sm_ll_lookup_bitmap()
dm btree: add a defensive bounds check to insert_at()
dm btree remove: change a bunch of BUG_ON() calls to proper errors
dm btree spine: eliminate duplicate le32_to_cpu() in node_check()
dm btree spine: remove extra node_check function declaration
|
|
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
|
|
Pull block updates from Jens Axboe:
- Unify where the struct request handling code is located in the blk-mq
code (Christoph)
- Header cleanups (Christoph)
- Clean up the io_context handling code (Christoph, me)
- Get rid of ->rq_disk in struct request (Christoph)
- Error handling fix for add_disk() (Christoph)
- request allocation cleanusp (Christoph)
- Documentation updates (Eric, Matthew)
- Remove trivial crypto unregister helper (Eric)
- Reduce shared tag overhead (John)
- Reduce poll_stats memory overhead (me)
- Known indirect function call for dio (me)
- Use atomic references for struct request (me)
- Support request list issue for block and NVMe (me)
- Improve queue dispatch pinning (Ming)
- Improve the direct list issue code (Keith)
- BFQ improvements (Jan)
- Direct completion helper and use it in mmc block (Sebastian)
- Use raw spinlock for the blktrace code (Wander)
- fsync error handling fix (Ye)
- Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me)
* tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits)
MAINTAINERS: add entries for block layer documentation
docs: block: remove queue-sysfs.rst
docs: sysfs-block: document virt_boundary_mask
docs: sysfs-block: document stable_writes
docs: sysfs-block: fill in missing documentation from queue-sysfs.rst
docs: sysfs-block: add contact for nomerges
docs: sysfs-block: sort alphabetically
docs: sysfs-block: move to stable directory
block: don't protect submit_bio_checks by q_usage_counter
block: fix old-style declaration
nvme-pci: fix queue_rqs list splitting
block: introduce rq_list_move
block: introduce rq_list_for_each_safe macro
block: move rq_list macros to blk-mq.h
block: drop needless assignment in set_task_ioprio()
block: remove unnecessary trailing '\'
bio.h: fix kernel-doc warnings
block: check minor range in device_add_disk()
block: use "unsigned long" for blk_validate_block_size().
block: fix error unwinding in device_add_disk
...
|
|
Pull io_uring updates from Jens Axboe:
- Support for prioritized work completions (Hao)
- Simplification of reissue (Pavel)
- Add support for CQE skip (Pavel)
- Memory leak fix going to 5.15-stable (Pavel)
- Re-write of internal poll. This both cleans up that code, and gets us
ready to fix the POLLFREE issue (Pavel)
- Various cleanups (GuoYong, Pavel, Hao)
* tag 'for-5.17/io_uring-2022-01-11' of git://git.kernel.dk/linux-block: (31 commits)
io_uring: fix not released cached task refs
io_uring: remove redundant tab space
io_uring: remove unused function parameter
io_uring: use completion batching for poll rem/upd
io_uring: single shot poll removal optimisation
io_uring: poll rework
io_uring: kill poll linking optimisation
io_uring: move common poll bits
io_uring: refactor poll update
io_uring: remove double poll on poll update
io_uring: code clean for some ctx usage
io_uring: batch completion in prior_task_list
io_uring: split io_req_complete_post() and add a helper
io_uring: add helper for task work execution code
io_uring: add a priority tw list for irq completion work
io-wq: add helper to merge two wq_lists
io_uring: reuse io_req_task_complete for timeouts
io_uring: tweak iopoll CQE_SKIP event counting
io_uring: simplify selected buf handling
io_uring: move up io_put_kbuf() and io_put_rw_kbuf()
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- refactor the dma-direct coherent allocator
- turn an macro into an inline in scatterlist.h (Logan Gunthorpe)
* tag 'dma-mapping-5.17' of git://git.infradead.org/users/hch/dma-mapping:
lib/scatterlist: cleanup macros into static inline functions
dma-direct: add a dma_direct_use_pool helper
dma-direct: factor the swiotlb code out of __dma_direct_alloc_pages
dma-direct: drop two CONFIG_DMA_RESTRICTED_POOL conditionals
dma-direct: warn if there is no pool for force unencrypted allocations
dma-direct: fail allocations that can't be made coherent
dma-direct: refactor the !coherent checks in dma_direct_alloc
dma-direct: factor out a helper for DMA_ATTR_NO_KERNEL_MAPPING allocations
dma-direct: clean up the remapping checks in dma_direct_alloc
dma-direct: always leak memory that can't be re-encrypted
dma-direct: don't call dma_set_decrypted for remapped allocations
dma-direct: factor out dma_set_{de,en}crypted helpers
|
|
Pick a fix which didn't make it into v5.16.
|
|
resets/reset-names are device specific and don't belong in the MDIO bus
schema. For example, it doesn't match what is defined for the
"qca,ar9331-switch" binding which defines "reset-names" to be "switch"
rather than "phy". Neither name is that useful IMO.
Other child properties are also device specific, but those won't conflict
with device schemas.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
|
|
The LKP robot reported that commit in Fixes: caused a failure. Turns out
the ldt_gdt_32 selftest turns into an infinite loop trying to clear the
segment.
As discovered by Sean, what happens is that PARANOID_EXIT_TO_KERNEL_MODE
in the handle_exception_return path overwrites the entry stack data with
the task stack data, restoring the "bad" segment value.
Instead of having the exception retry the instruction, have it emulate
the full instruction. Replace EX_TYPE_POP_ZERO with EX_TYPE_POP_REG
which will do the equivalent of: POP %reg; MOV $imm, %reg.
In order to encode the segment registers, add them as registers 8-11 for
32-bit.
By setting regs->[defg]s the (nested) RESTORE_REGS will pop this value
at the end of the exception handler and by increasing regs->sp, it will
have skipped the stack slot.
This was debugged by Sean Christopherson <seanjc@google.com>.
[ bp: Add EX_REG_GS too. ]
Fixes: aa93e2ad7464 ("x86/entry_32: Remove .fixup usage")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/Yd1l0gInc4zRcnt/@hirez.programming.kicks-ass.net
|
|
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
* clk-ingenic:
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
* clk-mediatek:
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
|
|
clk-next
- Clock and reset driver for Toshiba Visconti SoCs
* clk-socfpga:
clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: remove redundant assignment after a mask operation
clk: socfpga: remove redundant assignment on division
* clk-toshiba:
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC
* clk-st:
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
* clk-bitmain:
clk: bm1880: remove kfrees on static allocations
|
|
clk-next
* clk-nvidia:
clk: tegra: Support runtime PM and power domain
clk: tegra: Make vde a child of pll_p on tegra114
* clk-imx:
clk: imx8mp: Fix the parent clk of the audio_root_clk
clk: imx8mp: Remove IPG_AUDIO_ROOT from imx8mp-clock.h
clk: imx8mn: Fix imx8mn_clko1_sels
clk: imx: Use div64_ul instead of do_div
clk: imx: imx8ulp: set suppress_bind_attrs to true
* clk-samsung:
clk: samsung: Add initial Exynos7885 clock driver
clk: samsung: clk-pll: Add support for pll1417x
clk: samsung: Make exynos850_register_cmu shared
dt-bindings: clock: Document Exynos7885 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos7885 CMU
clk: samsung: exynos850: Add missing sysreg clocks
dt-bindings: clock: Add bindings for Exynos850 sysreg clocks
clk: samsung: exynos850: Register clocks early
clk: samsung: exynos850: Keep some crucial clocks running
clk: samsung: exynos850: Implement CMU_CMGP domain
dt-bindings: clock: Add bindings for Exynos850 CMU_CMGP
clk: samsung: exynos850: Implement CMU_APM domain
dt-bindings: clock: Add bindings for Exynos850 CMU_APM
clk: samsung: Update CPU clk registration
clk: samsung: Remove meaningless __init and extern from header files
clk: samsung: remove __clk_lookup() usage
dt-bindings: clock: samsung: add IDs for some core clocks
* clk-qcom: (25 commits)
clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled
clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time
clk: qcom: turingcc-qcs404: explicitly include clk-provider.h
clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h
clk: qcom: mmcc-apq8084: explicitly include clk-provider.h
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h
clk: qcom: gcc-sm6350: explicitly include clk-provider.h
clk: qcom: gcc-msm8994: explicitly include clk-provider.h
clk: qcom: gcc-sm8350: explicitly include clk-provider.h
clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
clk: qcom: Add clock driver for SM8450
clk: qcom: Add SDX65 GCC support
clk: qcom: Add LUCID_EVO PLL type for SDX65
dt-bindings: clock: Add SM8450 GCC clock bindings
dt-bindings: clock: Add SDX65 GCC clock bindings
clk: qcom: rpmh: add support for SM8450 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8450
clk: qcom: smd-rpm: Drop binary value handling for buffered clock
...
|
|
clk-next
* clk-x86:
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: Introduce clk-tps68470 driver
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
* clk-stm:
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
* clk-amlogic:
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
* clk-allwinner:
clk: sunxi-ng: Add support for the D1 SoC clocks
clk: sunxi-ng: gate: Add macros for gates with fixed dividers
clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw
dt-bindings: clk: Add compatibles for D1 CCUs
clk: sunxi-ng: Allow the CCU core to be built as a module
clk: sunxi-ng: Convert early providers to platform drivers
clk: sunxi-ng: Allow drivers to be built as modules
clk: sunxi-ng: Export symbols used by CCU drivers
|
|
'clk-debugfs' into clk-next
* clk-doc:
clk: Gemini: fix struct name in kernel-doc
clk: zynq: pll: Fix kernel-doc warnings
clk: imx: pllv1: fix kernel-doc notation for struct clk_pllv1
* clk-renesas: (31 commits)
clk: renesas: r9a07g044: Add GPU clock and reset entries
clk: renesas: r9a07g044: Add mux and divider for G clock
clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro
clk: renesas: cpg-mssr: Add support for R-Car S4-8
clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
clk: renesas: r9a07g044: Add TSU clock and reset entry
mmc: renesas_sdhi: Simplify an expression
mmc: renesas_sdhi: Use devm_clk_get_optional() to obtain CD clock
dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0
clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple()
clk: renesas: cpg-mssr: Check return value of pm_genpd_init()
clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()
clk: renesas: rzg2l: Check return value of pm_genpd_init()
clk: renesas: r9a07g044: Add RSPI clock and reset entries
clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV
clk: renesas: rzg2l: Add CPG_PL1_DDIV macro
mmc: renesas_sdhi: Parse DT for SDnH
mmc: renesas_sdhi: Use dev_err_probe when getting clock fails
...
* clk-at91:
clk: lan966x: Extend lan966x clock driver for clock gating support
dt-bindings: clock: lan966x: Extend includes with clock gates
dt-bindings: clock: lan966x: Extend for clock gate support
clk: gate: Add devm_clk_hw_register_gate()
clk: lan966x: Add lan966x SoC clock driver
dt-bindings: clock: lan966x: Add LAN966X Clock Controller
dt-bindings: clock: lan966x: Add binding includes for lan966x SoC clock IDs
* clk-cleanup:
clk: stm32mp1: remove redundant assignment to pointer data
clk: __clk_core_init() never takes NULL
clk: clk_core_get() can also return NULL
clk/ti/adpll: Make const pointer error a static const array
* clk-debugfs:
clk: Enable/Disable runtime PM for clk_summary
clk: Emit a stern warning with writable debugfs enabled
clk: Add write operation for clk_parent debugfs node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
|
