summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds5-66/+29
Pull SCSI target fixes from Nicholas Bellinger: "This includes fixes from HCH for -rc1 configfs default_groups conversion changes that ended up breaking some iscsi-target default_groups, along with Sagi's ib_drain_qp() conversion for iser-target to use the common caller now available to RDMA kernel consumers in v4.6+ code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: add a new add_wwn_groups fabrics method target: initialize the nacl base CIT begfore init_nodeacl target: remove ->fabric_cleanup_nodeacl iser-target: Use ib_drain_qp
2016-04-02Convert straggling drivers to new six-argument get_user_pages()Linus Torvalds2-3/+2
Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm") switched get_user_pages() callers to the simpler model where they no longer pass in the thread and mm pointer. But since then we've merged changes to a few drivers that re-introduce use of the old interface. Let's fix them up. They continued to work fine (thanks to the truly disgusting macros introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages() functions"), but cause unnecessary build noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-02Merge tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfsLinus Torvalds1-2/+2
Pull configfs fix from Christoph Hellwig: "A trivial fix to the recently introduced binary attribute helper macros" * tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs: configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions
2016-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds75-610/+824
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
2016-04-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds11-45/+45
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
2016-04-01Merge tag 'pm+acpi-4.6-rc2' of ↵Linus Torvalds4-0/+64
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-04-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds11-42/+34
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only
2016-04-02Merge branch 'acpi-processor'Rafael J. Wysocki4-0/+64
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-04-01Merge branch 'for-linus-4.6' of ↵Linus Torvalds1-20/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has a few fixes Dave Sterba had queued up. These are all pretty small, but since they were tested I decided against waiting for more" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: transaction_kthread() is not freezable btrfs: cleaner_kthread() doesn't need explicit freeze btrfs: do not write corrupted metadata blocks to disk btrfs: csum_tree_block: return proper errno value
2016-04-01Merge tag 'for-linus' of git://github.com/martinbrandenburg/linuxLinus Torvalds2-6/+4
Pull OrangeFS fixes from Martin Brandenburg: "Two bugfixes for OrangeFS. One is a reference counting bug and the other is a typo in client minimum version" * tag 'for-linus' of git://github.com/martinbrandenburg/linux: orangefs: minimum userspace version is 2.9.3 orangefs: don't put readdir slot twice
2016-04-01Merge tag 'arm64-fixes' of ↵Linus Torvalds7-131/+90
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - fix oops when patching in alternative sequences on big-endian CPUs - reconcile asm/perf_event.h after merge window fallout with KVM ARM - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: updates for 4.6 arm64: perf: Move PMU register related defines to asm/perf_event.h arm64: opcodes.h: Add arm big-endian config options before including arm header
2016-04-01Merge tag 'sound-4.6-rc2' of ↵Linus Torvalds7-22/+79
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - a fix in ALSA timer core to avoid possible BUG() trigger - a fix in ALSA timer core 32bit compat layer - a few HD-audio quirks for ASUS and HP machines - AMD HD-audio HDMI controller quirks - fixes of USB-audio double-free at some error paths - a fix for memory leak in DICE driver at hotunplug" * tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Use mod_timer() for rearming the system timer ALSA: hda - fix front mic problem for a HP desktop ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps ALSA: dice: fix memory leak when unplugging ALSA: hda - Apply fix for white noise on Asus N550JV, too ALSA: hda - Fix white noise on Asus N750JV headphone ALSA: hda - Asus N750JV external subwoofer fixup ALSA: timer: fix gparams ioctl compatibility for different architectures
2016-04-01.mailmap: add Christophe RicardChristophe Ricard1-0/+1
Different computers had different settings in the mail client. Some contributions appear as Christophe Ricard, others as Christophe RICARD. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01Make CONFIG_FHANDLE default yAndi Kleen1-1/+2
Newer Fedora and OpenSUSE didn't boot with my standard configuration. It took me some time to figure out why, in fact I had to write a script to try different config options systematically. The problem is that something (systemd) in dracut depends on CONFIG_FHANDLE, which adds open by file handle syscalls. While it is set in defconfigs it is very easy to miss when updating older configs because it is not default y. Make it default y and also depend on EXPERT, as dracut use is likely widespread. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm/page_isolation.c: fix the function commentsNeil Zhang1-1/+1
Commit fea85cff11de ("mm/page_isolation.c: return last tested pfn rather than failure indicator") changed the meaning of the return value. Let's change the function comments as well. Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list headMichal Hocko1-1/+5
Commit bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") has simplified the check for tasks already enqueued for the oom reaper by checking tsk->oom_reaper_list != NULL. This check is not sufficient because the tsk might be the head of the queue without any other tasks queued and then we would simply lockup looping on the same task. Fix the condition by checking for the head as well. Fixes: bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm/page_isolation: fix tracepoint to mirror check function behaviorLucas Stach1-1/+1
Page isolation has not failed if the fin pfn extends beyond the end pfn and test_pages_isolated checks this correctly. Fix the tracepoint to report the same result as the actual check function. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm/rmap: batched invalidations should use existing apiNadav Amit3-28/+8
The recently introduced batched invalidations mechanism uses its own mechanism for shootdown. However, it does wrong accounting of interrupts (e.g., inc_irq_stat is called for local invalidations), trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and may break some platforms as it bypasses the invalidation mechanisms of Xen and SGI UV. This patch reuses the existing TLB flushing mechnaisms instead. We use NULL as mm to indicate a global invalidation is required. Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01x86/mm: TLB_REMOTE_SEND_IPI should count pagesNadav Amit1-3/+9
TLB_REMOTE_SEND_IPI was recently introduced, but it counts bytes instead of pages. In addition, it does not report correctly the case in which flush_tlb_page flushes a page. Fix it to be consistent with other TLB counters. Fixes: 5b74283ab251b9d ("x86, mm: trace when an IPI is about to be sent") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm: fix invalid node in alloc_migrate_target()Xishi Qiu1-4/+4
It is incorrect to use next_node to find a target node, it will return MAX_NUMNODES or invalid node. This will lead to crash in buddy system allocation. Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: "Laura Abbott" <lauraa@codeaurora.org> Cc: Hui Zhu <zhuhui@xiaomi.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock()Chen Gang1-1/+1
The return value of pmd_trans_huge_lock() is a pointer, not a boolean value, so use NULL instead of false as the return value. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm, kasan: fix compilation for CONFIG_SLABAlexander Potapenko1-1/+1
Add the missing argument to set_track(). Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Konstantin Serebryany <kcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01MAINTAINERS: orangefs mailing list is subscribers-onlyJoe Perches1-1/+1
So update MAINTAINERS to say so. Signed-off-by: Joe Perches <joe@perches.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01net: mvneta: fix changing MTU when using per-cpu processingMarcin Wojtas1-14/+16
After enabling per-cpu processing it appeared that under heavy load changing MTU can result in blocking all port's interrupts and transmitting data is not possible after the change. This commit fixes above issue by disabling percpu interrupts for the time, when TXQs and RXQs are reconfigured. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01Merge branch 'stmmac-fixes'David S. Miller5-54/+80
Giuseppe Cavallaro says: ==================== stmmac MDIO and normal descr fixes This patch series is to fix the problems below and recently debugged in this mailing list: o to fix a problem for the HW where the normal descriptor o to fix the mdio registration according to the different platform configurations I am resending all the patches again: built on top of net.git repo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01stmmac: fix MDIO settingsGiuseppe CAVALLARO4-48/+73
Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01Revert "stmmac: Fix 'eth0: No PHY found' regression"Giuseppe CAVALLARO3-10/+11
This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01stmmac: fix TX normal DESCGiuseppe CAVALLARO1-8/+8
This patch fixs a regression raised when test on chips that use the normal descriptor layout. In fact, no len bits were set for the TDES1 and no OWN bit inside the TDES0. Signed-off-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Tested-by: Andreas Färber <afaerber@suse.de> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvneta: use cache_line_size() to get cacheline sizeJisheng Zhang1-1/+1
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: use cache_line_size() to get cacheline sizeJisheng Zhang1-1/+1
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: fix maybe-uninitialized warningJisheng Zhang1-1/+3
This is to fix the following maybe-uninitialized warning: drivers/net/ethernet/marvell/mvpp2.c:6007:18: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filterDaniel Borkmann3-15/+30
Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 994051625981 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq""Linus Walleij1-0/+17
This reverts commit 446f59acb70b70a425ea4105277a71eb615327cd.
2016-04-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds16-34/+152
Pull drm fixes from Dave Airlie: "Nothing too crazy in here: a bunch of AMD fixes/quirks, two msm fixes, some rockchip fixes, and a udl warning fix, along with one locking fix for displayport that seems to fix some dodgy monitors" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/udl: Use unlocked gem unreferencing drm/dp: move hw_mutex up the call stack drm/amdgpu: Don't move pinned BOs drm/radeon: Don't move pinned BOs drm/radeon: add a dpm quirk for all R7 370 parts drm/radeon: add another R7 370 quirk drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5 drm/amd: Beef up ACP Kconfig menu text drm/msm: fix typo in the !COMMON_CLK case drm/msm: fix bug after preclose removal
2016-04-01Merge tag 'powerpc-4.6-2' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fixup preempt underflow with huge pages from Sebastian Siewior - Fix altivec SPR not being saved from Oliver O'Halloran - Correct used_vsr comment from Simon Guo * tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Correct used_vsr comment powerpc/process: Fix altivec SPR not being saved powerpc/mm: Fixup preempt underflow with huge pages
2016-04-01Merge branch 'for-linus' of ↵Linus Torvalds14-193/+114
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A proper fix for the locking issue in the dasd driver - Wire up the new preadv2 nad pwritev2 system calls - Add the mark_rodata_ro function and set DEBUG_RODATA=y - A few more bug fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up preadv2/pwritev2 syscalls s390/pci: PCI function group 0 is valid for clp_query_pci_fn s390/crypto: provide correct file mode at device register. s390/mm: handle PTE-mapped tail pages in fast gup s390: add DEBUG_RODATA support s390: disable postinit-readonly for now s390/dasd: reorder lcu and device lock s390/cpum_sf: Fix cpu hotplug notifier transitions s390/cpum_cf: Fix missing cpu hotplug notifier transition
2016-04-01arm64: KVM: Add braces to multi-line if statement in virtual PMU codeWill Deacon1-1/+2
The kernel is written in C, not python, so we need braces around multi-line if statements. GCC 6 actually warns about this, thanks to the fantastic new "-Wmisleading-indentation" flag: | virt/kvm/arm/pmu.c: In function ‘kvm_pmu_overflow_status’: | virt/kvm/arm/pmu.c:198:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] | reg &= vcpu_sys_reg(vcpu, PMCNTENSET_EL0); | ^~~ | arch/arm64/kvm/../../../virt/kvm/arm/pmu.c:196:2: note: ...this ‘if’ clause, but it is not | if ((vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) | ^~ As it turns out, this particular case is harmless (we just do some &= operations with 0), but worth fixing nonetheless. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-01ALSA: timer: Use mod_timer() for rearming the system timerTakashi Iwai1-2/+2
ALSA system timer backend stops the timer via del_timer() without sync and leaves del_timer_sync() at the close instead. This is because of the restriction by the design of ALSA timer: namely, the stop callback may be called from the timer handler, and calling the sync shall lead to a hangup. However, this also triggers a kernel BUG() when the timer is rearmed immediately after stopping without sync: kernel BUG at kernel/time/timer.c:966! Call Trace: <IRQ> [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0 [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0 [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290 [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120 [<ffffffff81296b72>] call_timer_fn+0x162/0x520 [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520 [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0 .... It's the place where add_timer() checks the pending timer. It's clear that this may happen after the immediate restart without sync in our cases. So, the workaround here is just to use mod_timer() instead of add_timer(). This looks like a band-aid fix, but it's a right move, as snd_timer_interrupt() takes care of the continuous rearm of timer. Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-01kvm: set page dirty only if page has been writableYu Zhao1-2/+10
In absence of shadow dirty mask, there is no need to set page dirty if page has never been writable. This is a tiny optimization but good to have for people who care much about dirty page tracking. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: x86: reduce default value of halt_poll_ns parameterPaolo Bonzini1-1/+1
Windows lets applications choose the frequency of the timer tick, and in Windows 10 the maximum rate was changed from 1024 Hz to 2048 Hz. Unfortunately, because of the way the Windows API works, most applications who need a higher rate than the default 64 Hz will just do timeGetDevCaps(&tc, sizeof(tc)); timeBeginPeriod(tc.wPeriodMin); and pick the maximum rate. This causes very high CPU usage when playing media or games on Windows 10, even if the guest does not actually use the CPU very much, because the frequent timer tick causes halt_poll_ns to kick in. There is no really good solution, especially because Microsoft could sooner or later bump the limit to 4096 Hz, but for now the best we can do is lower a bit the upper limit for halt_poll_ns. :-( Reported-by: Jon Panozzo <jonp@lime-technology.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabledPaolo Bonzini1-0/+5
If SynIC is disabled, there is nothing that userspace can do to handle these exits; on the other hand, userspace probably will not know about KVM_EXIT_HYPERV_HCALL and complain about it or even exit. Just prevent anything bad from happening by handling the hypercall in KVM and returning an "invalid hypercall" code. Fixes: 83326e43f27e9a8a501427a0060f8af519a39bb2 Cc: Andrey Smetanin <irqlevel@gmail.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: x86: Inject pending interrupt even if pending nmi existYuki Shibuya1-10/+10
Non maskable interrupts (NMI) are preferred to interrupts in current implementation. If a NMI is pending and NMI is blocked by the result of nmi_allowed(), pending interrupt is not injected and enable_irq_window() is not executed, even if interrupts injection is allowed. In old kernel (e.g. 2.6.32), schedule() is often called in NMI context. In this case, interrupts are needed to execute iret that intends end of NMI. The flag of blocking new NMI is not cleared until the guest execute the iret, and interrupts are blocked by pending NMI. Due to this, iret can't be invoked in the guest, and the guest is starved until block is cleared by some events (e.g. canceling injection). This patch injects pending interrupts, when it's allowed, even if NMI is blocked. And, If an interrupts is pending after executing inject_pending_event(), enable_irq_window() is executed regardless of NMI pending counter. Cc: stable@vger.kernel.org Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01Merge tag 'kvm-arm-for-4.6-rc2' of ↵Paolo Bonzini4-22/+43
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for Linux v4.6-rc2. Fixes a bug that corrupts stage-2 translationson 16-bit VMID equipped systems and fixes CPU PM and Hotplug after the EL2 init code has been moved to C.
2016-04-01s390: wire up preadv2/pwritev2 syscallsHeiko Carstens2-1/+5
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-01s390/pci: PCI function group 0 is valid for clp_query_pci_fnPierre Morel1-2/+1
The PCI function group 0 is a valid function group, it is wrong to reject it. Let's accept PCI function group 0. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-01MAINTAINERS: Update my email addressMasami Hiramatsu1-1/+1
Since I moved to Linaro, this old address doesn't work anymore. I'll use my kernel.org account for upstreaming. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1459431203-7438-1-git-send-email-mhiramat@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-01ALSA: hda - fix front mic problem for a HP desktopHui Wang1-0/+9
The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712 Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-01drm/udl: Use unlocked gem unreferencingDaniel Vetter2-2/+2
For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-01drm/dp: move hw_mutex up the call stackRob Clark1-10/+17
1) don't let other threads trying to bang on aux channel interrupt the defer timeout/logic 2) don't let other threads interrupt the i2c over aux logic Technically, according to people who actually have the DP spec, this should not be required. In practice, it makes some troublesome Dell monitor (and perhaps others) work, so probably a case of "It's compliant if it works with windows" on the hw vendor's part.. v2: rebased to come before DPCD/AUX logging patch for easier backport to stable branches. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157 Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-01Merge branch 'drm-rockchip-next-fixes-2016-03-28' of ↵Dave Airlie4-15/+100
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes bunch of rockchip fixes. * 'drm-rockchip-next-fixes-2016-03-28' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 12:01:32 +0000