Age | Commit message (Collapse) | Author | Files | Lines |
|
Undo previously done operation in case macb_phylink_connect()
fails. Since macb_reset_hw() is the 1st undo operation the
napi_exit label was renamed to reset_hw.
Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Performance drop fix and other fixes
Here are three fixes for rxrpc:
(1) Fix a trace symbol mapping. It doesn't seem to let you map to "".
(2) Fix the handling of the remote receive window size when it increases
beyond the size we can support for our transmit window.
(3) Fix a performance drop caused by retransmitted packets being
accidentally marked as already ACK'd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: phy: MDIO bus scanning fixes
This patch series fixes two problems with the current MDIO bus scanning
logic which was identified while moving from 4.9 to 5.4 on devices that
do rely on scanning the MDIO bus at runtime because they use pluggable
cards.
Changes in v2:
- added comment explaining the special value of -ENODEV
- added Andrew's Reviewed-by tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.
In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).
The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.
Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.
Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.
Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.
Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix typo: "Triger" --> "Trigger"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix typo: "trigered" --> "triggered"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2020-06-19
1) Fix double ESP trailer insertion in IPsec crypto offload if
netif_xmit_frozen_or_stopped is true. From Huy Nguyen.
2) Merge fixup for "remove output_finish indirection from
xfrm_state_afinfo". From Stephen Rothwell.
3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several
other encryption algorithms. Also modernize the crypto algorithm
selections for ESP and AH, remove those that are maked as "MUST NOT"
and add those that are marked as "MUST" be implemented in RFC 8221.
From Eric Biggers.
Please note the merge conflict between commit:
a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'")
from Linus' tree and commits:
7d4e39195925 ("esp, ah: consolidate the crypto algorithm selections")
be01369859b8 ("esp, ah: modernize the crypto algorithm selections")
from the ipsec tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-18
This series contains fixes to ixgbe, i40e and ice driver.
Ciara fixes up the ixgbe, i40e and ice drivers to protect access when
allocating and freeing the rings. In addition, made use of READ_ONCE
when reading the rings prior to accessing the statistics pointer.
Björn fixes a crash where the receive descriptor ring allocation was
moved to a different function, which broke the ethtool set_ringparam()
hook.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the AF_XDP buffer allocator was introduced, the Rx SW ring
"rx_bi" allocation was moved from i40e_setup_rx_descriptors()
function, and was instead done in the i40e_configure_rx_ring()
function.
This broke the ethtool set_ringparam() hook for changing the Rx
descriptor count, which was relying on i40e_setup_rx_descriptors() to
handle the allocation.
Fix this by adding an explicit i40e_alloc_rx_bi() call to
i40e_set_ringparam().
Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The READ_ONCE macro is used when reading rings prior to accessing the
statistics pointer. The corresponding WRITE_ONCE usage when allocating and
freeing the rings to ensure protected access was not in place. Introduce
this.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses
from recursive dereference inside the stack") Hannes added code
so that IPv6 stack would not trust skb->sk for typical cases
where packet goes through 'standard' xmit path (__dev_queue_xmit())
Alas af_packet had a dev_direct_xmit() path that was not
dealing yet with xmit_recursion level.
Also change sk_mc_loop() to dump a stack once only.
Without this patch, syzbot was able to trigger :
[1]
[ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70
[ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core
[ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273
[ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70
[ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0
[ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212
[ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007
[ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000
[ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008
[ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000
[ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00
[ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000
[ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0
[ 153.567391] Call Trace:
[ 153.567391] ip6_finish_output2+0x34e/0x550
[ 153.567391] __ip6_finish_output+0xe7/0x110
[ 153.567391] ip6_finish_output+0x2d/0xb0
[ 153.567392] ip6_output+0x77/0x120
[ 153.567392] ? __ip6_finish_output+0x110/0x110
[ 153.567392] ip6_local_out+0x3d/0x50
[ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0
[ 153.567393] ? ksize+0x19/0x30
[ 153.567393] ipvlan_start_xmit+0x18/0x50
[ 153.567393] dev_direct_xmit+0xf3/0x1c0
[ 153.567393] packet_direct_xmit+0x69/0xa0
[ 153.567394] packet_sendmsg+0xbf0/0x19b0
[ 153.567394] ? plist_del+0x62/0xb0
[ 153.567394] sock_sendmsg+0x65/0x70
[ 153.567394] sock_write_iter+0x93/0xf0
[ 153.567394] new_sync_write+0x18e/0x1a0
[ 153.567395] __vfs_write+0x29/0x40
[ 153.567395] vfs_write+0xb9/0x1b0
[ 153.567395] ksys_write+0xb1/0xe0
[ 153.567395] __x64_sys_write+0x1a/0x20
[ 153.567395] do_syscall_64+0x43/0x70
[ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 153.567396] RIP: 0033:0x453549
[ 153.567396] Code: Bad RIP value.
[ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549
[ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003
[ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000
[ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc
[ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700
[ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]---
f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_find_node_by_name() will do an of_node_put() on the "from" argument.
With CONFIG_OF_DYNAMIC enabled which checks for device_node reference
counts, we would be getting a warning like this:
[ 6.347230] refcount_t: increment on 0; use-after-free.
[ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156
refcount_inc_checked+0x38/0x44
[ 6.360601] Modules linked in:
[ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W
5.4.46-gb78b3e9956e6 #13
[ 6.372546] Hardware name: BCM97278SV (DT)
[ 6.376649] Workqueue: events deferred_probe_work_func
[ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 6.386595] pc : refcount_inc_checked+0x38/0x44
[ 6.391133] lr : refcount_inc_checked+0x38/0x44
...
[ 6.478791] Call trace:
[ 6.481243] refcount_inc_checked+0x38/0x44
[ 6.485433] kobject_get+0x3c/0x4c
[ 6.488840] of_node_get+0x24/0x34
[ 6.492247] of_irq_find_parent+0x3c/0xe0
[ 6.496263] of_irq_parse_one+0xe4/0x1d0
[ 6.500191] irq_of_parse_and_map+0x44/0x84
[ 6.504381] bcm_sf2_sw_probe+0x22c/0x844
[ 6.508397] platform_drv_probe+0x58/0xa8
[ 6.512413] really_probe+0x238/0x3fc
[ 6.516081] driver_probe_device+0x11c/0x12c
[ 6.520358] __device_attach_driver+0xa8/0x100
[ 6.524808] bus_for_each_drv+0xb4/0xd0
[ 6.528650] __device_attach+0xd0/0x164
[ 6.532493] device_initial_probe+0x24/0x30
[ 6.536682] bus_probe_device+0x38/0x98
[ 6.540524] deferred_probe_work_func+0xa8/0xd4
[ 6.545061] process_one_work+0x178/0x288
[ 6.549078] process_scheduled_works+0x44/0x48
[ 6.553529] worker_thread+0x218/0x270
[ 6.557285] kthread+0xdc/0xe4
[ 6.560344] ret_from_fork+0x10/0x18
[ 6.563925] ---[ end trace 68f65caf69bb152a ]---
Fix this by adding a of_node_get() to increment the reference count
prior to the call.
Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed
an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As
a result, fraglist GSO feature is not shown in 'ethtool -k' output and
can't be toggled on/off.
The fix is trivial.
Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver function tg3_io_error_detected() calls napi_disable twice,
without an intervening napi_enable, when the number of EEH errors exceeds
eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock.
Add check for pcierr_recovery which skips code already executed for the
"Frozen" state.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Code to handle multiproto configuration is missing.
Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Julian Wiedmann says:
====================
s390/qeth: fixes 2020-06-17
please apply the following patch series for qeth to netdev's net tree.
The first patch fixes a regression in the error handling for a specific
cmd type. I have some follow-ups queued up for net-next to clean this
up properly...
The second patch fine-tunes the HW offload restrictions that went in
with this merge window. In some setups we don't need to apply them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a device is configured with ISOLATION_MODE_FWD, traffic never goes
through the internal switch. Don't apply the offload restrictions in
this case.
Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current(?) OSA devices also store their cmd-specific return codes for
SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code.
So once we added stricter checking for the top-level field a while ago,
none of the error logic that rolls back the user's configuration to its
old state is applied any longer.
For this specific cmd, go back to the old model where we peek into the
cmd structure even though the top-level field indicated an error.
Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paolo Abeni says:
====================
mptcp: cope with syncookie on MP_JOINs
Currently syncookies on MP_JOIN connections are not handled correctly: the
connections fallback to TCP and are kept alive instead of resetting them at
fallback time.
The first patch propagates the required information up to syn_recv_sock time,
and the 2nd patch addresses the unifying the error path for all MP_JOIN
requests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently any MPTCP socket using syn cookies will fallback to
TCP at 3rd ack time. In case of MP_JOIN requests, the RFC mandate
closing the child and sockets, but the existing error paths
do not handle the syncookie scenario correctly.
Address the issue always forcing the child shutdown in case of
MP_JOIN fallback.
Fixes: ae2dd7164943 ("mptcp: handle tcp fallback when using syn cookies")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msk ownership is transferred to the child socket at
3rd ack time, so that we avoid more lookups later. If the
request does not reach the 3rd ack, the MSK reference is
dropped at request sock release time.
As a side effect, fallback is now tracked by a NULL msk
reference instead of zeroed 'mp_join' field. This will
simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ie.,
$ ifconfig eth0 6.6.6.6 netmask 255.255.255.0
$ ip rule add from 6.6.6.6 table 6666
$ ip route add 9.9.9.9 via 6.6.6.6
$ ping -I 6.6.6.6 9.9.9.9
PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data.
3 packets transmitted, 0 received, 100% packet loss, time 2079ms
$ arp
Address HWtype HWaddress Flags Mask Iface
6.6.6.6 (incomplete) eth0
The arp request address is error, this is because fib_table_lookup in
fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of
the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST.
Here I add a check of whether this is RT_TABLE_MAIN to solve this problem.
Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups")
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Fix VLAN checks for SJA1105 DSA tc-flower filters
This fixes a ridiculous situation where the driver, in VLAN-unaware
mode, would refuse accepting any tc filter:
tc filter replace dev sw1p3 ingress flower skip_sw \
dst_mac 42:be:24:9b:76:20 \
action gate (...)
Error: sja1105: Can only gate based on {DMAC, VID, PCP}.
tc filter replace dev sw1p3 ingress protocol 802.1Q flower skip_sw \
vlan_id 1 vlan_prio 0 dst_mac 42:be:24:9b:76:20 \
action gate (...)
Error: sja1105: Can only gate based on DMAC.
So, without changing the VLAN awareness state, it says it doesn't want
VLAN-aware rules, and it doesn't want VLAN-unaware rules either. One
would say it's in Schrodinger's state...
Now, the situation has been made worse by commit 7f14937facdc ("net:
dsa: sja1105: keep the VLAN awareness state in a driver variable"),
which made VLAN awareness a ternary attribute, but after inspecting the
code from before that patch with a truth table, it looks like the
logical bug was there even before.
While attempting to fix this, I also noticed some leftover debugging
code in one of the places that needed to be fixed. It would have
appeared in the context of patch 3/3 anyway, so I decided to create a
patch that removes it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This action requires the VLAN awareness state of the switch to be of the
same type as the key that's being added:
- If the switch is unaware of VLAN, then the tc filter key must only
contain the destination MAC address.
- If the switch is VLAN-aware, the key must also contain the VLAN ID and
PCP.
But this check doesn't work unless we verify the VLAN awareness state on
both the "if" and the "else" branches.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This action requires the VLAN awareness state of the switch to be of the
same type as the key that's being added:
- If the switch is unaware of VLAN, then the tc filter key must only
contain the destination MAC address.
- If the switch is VLAN-aware, the key must also contain the VLAN ID and
PCP.
But this check doesn't work unless we verify the VLAN awareness state on
both the "if" and the "else" branches.
Fixes: dfacc5a23e22 ("net: dsa: sja1105: support flow-based redirection via virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This shouldn't be there.
Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Davide Caratti says:
====================
two fixes for 'act_gate' control plane
- patch 1/2 attempts to fix the error path of tcf_gate_init() when users
try to configure 'act_gate' rules with wrong parameters
- patch 2/2 is a follow-up of a recent fix for NULL dereference in
the error path of tcf_gate_init()
further work will introduce a tdc test for 'act_gate'.
changes since v2:
- fix undefined behavior in patch 1/2
- improve comment in patch 2/2
changes since v1:
coding style fixes in patch 1/2 and 2/2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
assigning a dummy value of 'clock_id' to avoid cancellation of the cycle
timer before its initialization was a temporary solution, and we still
need to handle the case where act_gate timer parameters are changed by
commands like the following one:
# tc action replace action gate <parameters>
the fix consists in the following items:
1) remove the workaround assignment of 'clock_id', and init the list of
entries before the first error path after IDR atomic check/allocation
2) validate 'clock_id' earlier: there is no need to do IDR atomic
check/allocation if we know that 'clock_id' is a bad value
3) use a dedicated function, 'gate_setup_timer()', to ensure that the
timer is cancelled and re-initialized on action overwrite, and also
ensure we initialize the timer in the error path of tcf_gate_init()
v3: improve comment in the error path of tcf_gate_init() (thanks to
Vladimir Oltean)
v2: avoid 'goto' in gate_setup_timer (thanks to Cong Wang)
CC: Ivan Vecera <ivecera@redhat.com>
Fixes: a01c245438c5 ("net/sched: fix a couple of splats in the error path of tfc_gate_init()")
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
it is possible to see a KASAN use-after-free, immediately followed by a
NULL dereference crash, with the following command:
# tc action add action gate index 3 cycle-time 100000000ns \
> cycle-time-ext 100000000ns clockid CLOCK_TAI
BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960
Write of size 1 at addr ffff88810a5908bc by task tc/883
CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ #188
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x75/0xa0
print_address_description.constprop.6+0x1a/0x220
kasan_report.cold.9+0x37/0x7c
tcf_action_init_1+0x8eb/0x960
tcf_action_init+0x157/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ #188
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:tcf_action_fill_size+0xa3/0xf0
[....]
RSP: 0018:ffff88813a48f250 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6
RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070
RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03
R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800
FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0
Call Trace:
tcf_action_init+0x172/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
this is caused by the test on 'cycletime_ext', that is still unassigned
when the action is newly created. This makes the action .init() return 0
without calling tcf_idr_insert(), hence the UAF + crash.
rework the logic that prevents zero values of cycle-time, as follows:
1) 'tcfg_cycletime_ext' seems to be unused in the action software path,
and it was already possible by other means to obtain non-zero
cycletime and zero cycletime-ext. So, removing that test should not
cause any damage.
2) while at it, we must prevent overwriting configuration data with wrong
ones: use a temporary variable for 'tcfg_cycletime', and validate it
preserving the original semantic (that allowed computing the cycle
time as the sum of all intervals, when not specified by
TCA_GATE_CYCLE_TIME).
3) remove the test on 'tcfg_cycletime', no more useful, and avoid
returning -EFAULT, which did not seem an appropriate return value for
a wrong netlink attribute.
v3: fix uninitialized 'cycletime' (thanks to Vladimir Oltean)
v2: remove useless 'return;' at the end of void gate_get_start_time()
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
CC: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the datapath, the ip_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.
Test commands:
ip netns add A
ip netns add B
ip link add eth0 type veth peer name eth1
ip link set eth0 netns A
ip link set eth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set eth0 up
ip netns exec A ip link add gre1 type gre local 10.0.0.1 \
remote 10.0.0.2
ip netns exec A ip link set gre1 up
ip netns exec A ip a a 10.0.100.1/24 dev gre1
ip netns exec A ip a a 10.0.0.1/24 dev eth0
ip netns exec B ip link set lo up
ip netns exec B ip link set eth1 up
ip netns exec B ip link add gre1 type gre local 10.0.0.2 \
remote 10.0.0.1
ip netns exec B ip link set gre1 up
ip netns exec B ip a a 10.0.100.2/24 dev gre1
ip netns exec B ip a a 10.0.0.2/24 dev eth1
ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 &
ip netns del B
Splat looks like:
[ 77.793450][ C3] ==================================================================
[ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30
[ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905
[ 77.796398][ C3]
[ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616
[ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 77.798453][ C3] Call Trace:
[ 77.798815][ C3] <IRQ>
[ 77.799142][ C3] dump_stack+0x9d/0xdb
[ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450
[ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30
[ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30
[ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30
[ 77.802145][ C3] kasan_report+0x154/0x190
[ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30
[ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30
[ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre]
[ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre]
[ 77.806293][ C3] ? lock_acquire+0x1a9/0x870
[ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre]
[ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre]
[ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0
[ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre]
[ ... ]
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.
Test commands:
ip netns add A
ip netns add B
ip link add eth0 type veth peer name eth1
ip link set eth0 netns A
ip link set eth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set eth0 up
ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \
remote fc:0::2
ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1
ip netns exec A ip link set ip6gre1 up
ip netns exec A ip -6 a a fc:0::1/64 dev eth0
ip netns exec A ip link set ip6gre0 up
ip netns exec B ip link set lo up
ip netns exec B ip link set eth1 up
ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \
remote fc:0::1
ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1
ip netns exec B ip link set ip6gre1 up
ip netns exec B ip -6 a a fc:0::2/64 dev eth1
ip netns exec B ip link set ip6gre0 up
ip netns exec A ping fc:100::2 -s 60000 &
ip netns del B
Splat looks like:
[ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429
[ 73.089317][ C1]
[ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602
[ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 73.091725][ C1] Call Trace:
[ 73.092160][ C1] <IRQ>
[ 73.092556][ C1] dump_stack+0x96/0xdb
[ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450
[ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.096619][ C1] kasan_report+0x154/0x190
[ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre]
[ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre]
[ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre]
[ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0
[ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510
[ 73.103296][ C1] ip6_input_finish+0x5b/0xf0
[ 73.103920][ C1] ip6_input+0xcd/0x2c0
[ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0
[ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0
[ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 73.106548][ C1] ipv6_rcv+0x1f1/0x300
[ ... ]
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current code, ->ndo_start_xmit() can be executed recursively only
10 times because of stack memory.
But, in the case of the vxlan, 10 recursion limit value results in
a stack overflow.
In the current code, the nested interface is limited by 8 depth.
There is no critical reason that the recursion limitation value should
be 10.
So, it would be good to be the same value with the limitation value of
nesting interface depth.
Test commands:
ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789
ip link set vxlan10 up
ip a a 192.168.10.1/24 dev vxlan10
ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent
for i in {9..0}
do
let A=$i+1
ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789
ip link set vxlan$i up
ip a a 192.168.$i.1/24 dev vxlan$i
ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent
bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self
done
hping3 192.168.10.2 -2 -d 60000
Splat looks like:
[ 103.814237][ T1127] =============================================================================
[ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000
[ 103.873187][ T1127] -----------------------------------------------------------------------------
[ 103.873187][ T1127]
[ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020
[ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575
[ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 103.883006][ T1127] Call Trace:
[ 103.883324][ T1127] dump_stack+0x96/0xdb
[ 103.883716][ T1127] slab_err+0xad/0xd0
[ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30
[ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360
[ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160
[ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.886316][ T1127] check_slab+0x97/0xb0
[ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0
[ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630
[ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.888265][ T1127] ? lock_downgrade+0x730/0x730
[ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10
[ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80
[ 103.889675][ T1127] __slab_alloc+0x3e/0x80
[ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420
[ ... ]
Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got a memleak report when doing some fuzz test:
unreferenced object 0xffff888112584000 (size 13599):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 32 bytes):
74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............
00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000002f60ba65>] __kmalloc_node+0x309/0x3a0
[<0000000075b211ec>] kvmalloc_node+0x7f/0xc0
[<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0
[<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888111845cc0 (size 8):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 8 bytes):
74 61 70 30 00 88 ff ff tap0....
backtrace:
[<000000004c159777>] kstrdup+0x35/0x70
[<00000000d8b496ad>] kstrdup_const+0x3d/0x50
[<00000000494e884a>] kvasprintf_const+0xf1/0x180
[<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140
[<000000008fbdfc7b>] dev_set_name+0xab/0xe0
[<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390
[<00000000602704fe>] register_netdevice+0xb61/0x1250
[<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff88811886d800 (size 512):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=.....
backtrace:
[<0000000050315800>] device_add+0x61e/0x1950
[<0000000021008dfb>] netdev_register_kobject+0x17e/0x390
[<00000000602704fe>] register_netdevice+0xb61/0x1250
[<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets
referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed
SGMII). This is an upclocked 1000BaseX mode, thus
PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it.
adding support for it merely means writing the correct magic value into
the MVNETA_SERDES_CFG register.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MVNETA_SERDES_CFG register is only available on older SoCs like the
Armada XP. On newer SoCs like the Armada 38x the fields are moved to
comphy. This patch moves the writes to this register next to the comphy
initialization, so that depending on the SoC either comphy or
MVNETA_SERDES_CFG is configured.
With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it
doesn't exist.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up vlan_features for use by any vlans above us.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the driver is busy resetting queues after a change in
MTU or queue parameters, don't bother checking the link,
wait until the next watchdog cycle.
Fixes: 987c0871e8ae ("ionic: check for linkup in watchdog")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2ad6691d988c, which moved the modification of the status annotation
for a packet in the Tx buffer prior to the retransmission moved the state
clearance, but managed to lose the bit that set it to UNACK.
Consequently, if a retransmission occurs, the packet is accidentally
changed to the ACK state (ie. 0) by masking it off, which means that the
packet isn't counted towards the tally of newly-ACK'd packets if it gets
hard-ACK'd. This then prevents the congestion control algorithm from
recovering properly.
Fix by reinstating the change of state to UNACK.
Spotted by the generic/460 xfstest.
Fixes: 2ad6691d988c ("rxrpc: Fix race between incoming ACK parser and retransmitter")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The handling of the receive window size (rwind) from a received ACK packet
is not correct. The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process. This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.
Fix this by limiting rwind before we compare it to tx_winsize.
The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.
Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Using a AX88179 device (0b95:1790), I see two bytes of appended data on
every RX packet. For example, this 48-byte ping, using 0xff as a
payload byte:
04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64
0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500
0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8
0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000
0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff
0x0040: ffff ffff ffff ffff ffff ffff ffff ffff
0x0050: ffff ffff ffff ffff ffff ffff ffff ffff
0x0060: ffff 961f
Those last two bytes - 96 1f - aren't part of the original packet.
In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte
'alignment pseudo header' from the start of the packet, and sets the
length from a per-packet field populated by hardware. It looks like that
length field *includes* the 2-byte header; the current driver assumes
that it's excluded.
This change trims the 2-byte alignment header after we've set the packet
length, so the resulting packet length is correct. While we're moving
the comment around, this also fixes the spelling of 'pseudo'.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The trace symbol printer (__print_symbolic()) ignores symbols that map to
an empty string and prints the hex value instead.
Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid
this.
Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 158 insertions(+), 59 deletions(-).
The main changes are:
1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii.
2) [gs]etsockopt fix for large optlen, from Stanislav.
3) devmap allocation fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend existing doc with more details about requiring ctx->optlen = 0
for handling optval > PAGE_SIZE.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-3-sdf@google.com
|
|
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
|
|
Attaching to these hooks can break iptables because its optval is
usually quite big, or at least bigger than the current PAGE_SIZE limit.
David also mentioned some SCTP options can be big (around 256k).
For such optvals we expose only the first PAGE_SIZE bytes to
the BPF program. BPF program has two options:
1. Set ctx->optlen to 0 to indicate that the BPF's optval
should be ignored and the kernel should use original userspace
value.
2. Set ctx->optlen to something that's smaller than the PAGE_SIZE.
v5:
* use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov)
* update the docs accordingly
v4:
* use temporary buffer to avoid optval == optval_end == NULL;
this removes the corner case in the verifier that might assume
non-zero PTR_TO_PACKET/PTR_TO_PACKET_END.
v3:
* don't increase the limit, bypass the argument
v2:
* proper comments formatting (Jakub Kicinski)
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
|
|
Syzkaller discovered that creating a hash of type devmap_hash with a large
number of entries can hit the memory allocator limit for allocating
contiguous memory regions. There's really no reason to use kmalloc_array()
directly in the devmap code, so just switch it to the existing
bpf_map_area_alloc() function that is used elsewhere.
Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
|
|
In commit 34cc0b338a61 we only handled the frame_sz in convert_to_xdp_frame().
This patch will also handle frame_sz in xdp_convert_zc_to_xdp_frame().
Fixes: 34cc0b338a61 ("xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frame")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616103518.2963410-1-liuhangbin@gmail.com
|