summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller242-1793/+3388
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22marvell: mark mvneta and mvpp2 32-bit onlyArnd Bergmann1-0/+2
Both of these drivers won't work on 64-bit architectures unless they are redesigned, since they store a virtual address pointer in a 32-bit field of the descriptors: drivers/net/ethernet/marvell/mvneta_bm.c: In function 'mvneta_bm_construct': drivers/net/ethernet/marvell/mvneta_bm.c:103:16: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_prs_vlan_init': drivers/net/ethernet/marvell/mvpp2.c:2563:32: error: large integer implicitly truncated to unsigned type [-Werror=overflow] This limits the COMPILE_TEST option for the two drivers again to only build them on 32-bit. This seems nicer than shutting up the warnings, in case we ever actually want to use them on 64-bit, as the warnings indicate which parts of the driver are currently broken there. Fixes: a0627f776a45 ("net: marvell: Allow drivers to be built with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge branch 'mlxsw-thermal-zone'David S. Miller6-0/+533
Jiri Pirko says: ==================== mlxsw: core: Implement thermal zone Implement thermal zone for mlxsw based HW. The first patch is just a register dependency for the second patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22mlxsw: core: Implement thermal zoneIvan Vecera5-0/+484
Implement thermal zone for mlxsw based HW. It uses temperature sensor provided by ASIC (the same as mlxsw hwmon interface) to report current temp to thermal core. The ASIC's PWM is then used to control speed of system fans registered as cooling devices. Signed-off-by: Ivan Vecera <cera@cera.cz> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22mlxsw: reg: Add Management Fan Speed Limit registerJiri Pirko1-0/+49
The MFSL register is used to configure the fan speed event / interrupt notification mechanism. Fan speed threshold are defined for both under-speed and over-speed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge branch 'mv88e6390-initial-support'David S. Miller5-175/+628
Andrew Lunn says: ==================== Start adding support for mv88e6390 This is the first patchset implementing support for the mv88e6390 family. This is a new generation of switch devices and has numerous incompatible changes to the registers. These patches allow the switch to the detected during probe, and makes the statistics unit work. These patches are insufficient to make the mv88e6390 functional. More patches will follow. v2: Move stats code into global1 Change DT compatible string to mv88e6190 Fixed mv88e6351 stats which v1 had broken ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Move g1 stats code in global1.[ch]Andrew Lunn3-52/+36
Move the stats functions which access global 1 registers into global1.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Implement mv88e6390 get_statsAndrew Lunn2-10/+32
The mv88e6390 uses a different bit to select between bank0 and bank1 of the statistics. So implement an ops function for this, and pass the selector bit to the generic stats read function. Also, the histogram selection has moved for the mv88e6390, so abstract its selection as well. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add stats_get_stats to ops structureAndrew Lunn2-28/+57
Different families have different sets of statistics. Abstract this using a stats_get_stats op. The mv88e6390 needs a different implementation, which will be added later. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add stats_get_sset_count|string to ops structureAndrew Lunn2-80/+177
Different families have different sets of statistics. Abstract this using a stats_get_sset_count and stats_get_strings op. Each stat has a bitmap, and the ops implementer uses a bit map mask to count the statistics which apply for the family, or return the list of strings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: Rename functions to avoid _ prefix. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add mv88e6390 statistics unit initAndrew Lunn4-0/+46
The statistics unit on the mv88e6390 needs the histogram mode to be configured in a different register compared to other devices. Add an ops to do this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: Rename to mv88e6390_g1_stats_set_histogram Move into global1.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add mv88e6390 stats snapshot operationAndrew Lunn4-1/+27
The MV88E6390 has a control register for what the histogram statistics actually contain. This means the stat_snapshot method should not set this information. So implement the 6390 stats_snapshot function without these bits. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add comment about family a device belongs toAndrew Lunn1-0/+24
Knowing the family of device belongs to helps with picking the ops implementation which is appropriate to the device. So add a comment to each structure of ops. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Abstract stats_snapshot into ops structureAndrew Lunn4-15/+56
Taking a stats snapshot differs between same families. Abstract this into an ops member. At the same time, move the code into global1.[ch], since the registers are in the global1 range. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Add the mv88e6390 familyAndrew Lunn3-1/+182
With the devices added to the tables, the probe will recognize the switch. This however is not sufficient to make it work properly, other changes are needed because of incompatibilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Fix unused variable warning by using variableAndrew Lunn1-0/+3
_mv88e6xxx_stats_wait() did not check the return value from mv88e6xxx_g1_read(), so the compiler complained about set but unused err. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22net: dsa: mv88e6xxx: Take switch out of reset before probeAndrew Lunn1-4/+4
The switch needs to be taken out of reset before we can read its ID register on the MDIO bus. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21Merge branch 'for-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull apparmor bugfix from James Morris: "This has a fix for a policy replacement bug that is fairly serious for apache mod_apparmor users, as it results in the wrong policy being applied on an network facing service" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: apparmor: fix change_hat not finding hat after policy replacement
2016-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds17-83/+948
Pull sparc fixes from David Miller: 1) With modern networking cards we can run out of 32-bit DMA space, so support 64-bit DMA addressing when possible on sparc64. From Dave Tushar. 2) Some signal frame validation checks are inverted on sparc32, fix from Andreas Larsson. 3) Lockdep tables can get too large in some circumstances on sparc64, add a way to adjust the size a bit. From Babu Moger. 4) Fix NUMA node probing on some sun4v systems, from Thomas Tai. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: drop duplicate header scatterlist.h lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc sunbmac: Fix compiler warning sunqe: Fix compiler warnings sparc64: Enable 64-bit DMA sparc64: Enable sun4v dma ops to use IOMMU v2 APIs sparc64: Bind PCIe devices to use IOMMU v2 service sparc64: Initialize iommu_map_table and iommu_pool sparc64: Add ATU (new IOMMU) support sparc64: Add FORCE_MAX_ZONEORDER and default to 13 sparc64: fix compile warning section mismatch in find_node() sparc32: Fix inverted invalid_frame_pointer checks on sigreturns sparc64: Fix find_node warning if numa node cannot be found
2016-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds63-560/+1020
Pull networking fixes from David Miller: 1) Clear congestion control state when changing algorithms on an existing socket, from Florian Westphal. 2) Fix register bit values in altr_tse_pcs portion of stmmac driver, from Jia Jie Ho. 3) Fix PTP handling in stammc driver for GMAC4, from Giuseppe CAVALLARO. 4) Fix udplite multicast delivery handling, it ignores the udp_table parameter passed into the lookups, from Pablo Neira Ayuso. 5) Synchronize the space estimated by rtnl_vfinfo_size and the space actually used by rtnl_fill_vfinfo. From Sabrina Dubroca. 6) Fix memory leak in fib_info when splitting nodes, from Alexander Duyck. 7) If a driver does a napi_hash_del() explicitily and not via netif_napi_del(), it must perform RCU synchronization as needed. Fix this in virtio-net and bnxt drivers, from Eric Dumazet. 8) Likewise, it is not necessary to invoke napi_hash_del() is we are also doing neif_napi_del() in the same code path. Remove such calls from be2net and cxgb4 drivers, also from Eric Dumazet. 9) Don't allocate an ID in peernet2id_alloc() if the netns is dead, from WANG Cong. 10) Fix OF node and device struct leaks in of_mdio, from Johan Hovold. 11) We cannot cache routes in ip6_tunnel when using inherited traffic classes, from Paolo Abeni. 12) Fix several crashes and leaks in cpsw driver, from Johan Hovold. 13) Splice operations cannot use freezable blocking calls in AF_UNIX, from WANG Cong. 14) Link dump filtering by master device and kind support added an error in loop index updates during the dump if we actually do filter, fix from Zhang Shengju. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: zero ca_priv area when switching cc algorithms net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC tipc: eliminate obsolete socket locking policy description rtnl: fix the loop index update error in rtnl_dump_ifinfo() l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind() net: macb: add check for dma mapping error in start_xmit() rtnetlink: fix FDB size computation netns: fix get_net_ns_by_fd(int pid) typo af_unix: conditionally use freezable blocking calls in read net: ethernet: ti: cpsw: fix fixed-link phy probe deferral net: ethernet: ti: cpsw: add missing sanity check net: ethernet: ti: cpsw: fix secondary-emac probe error path net: ethernet: ti: cpsw: fix of_node and phydev leaks net: ethernet: ti: cpsw: fix deferred probe net: ethernet: ti: cpsw: fix mdio device reference leak net: ethernet: ti: cpsw: fix bad register access in probe error path net: sky2: Fix shutdown crash cfg80211: limit scan results cache size net sched filters: pass netlink message flags in event notification ...
2016-11-21net: ieee802154: constify ieee802154_ops structuresBhumika Goyal2-2/+2
Declare the structure ieee802154_ops as const as it is only passed as an argument to the function ieee802154_alloc_hw. This argument is of type const struct ieee802154_ops *, so ieee80254_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ieee802154_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1; @@ ieee802154_alloc_hw(e1,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ieee802154_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ieee802154_ops i; The before and after size details of the affected files are: text data bss dec hex filename 8669 1176 16 9861 2685 drivers/net/ieee802154/adf7242.o 8805 1048 16 9869 268d drivers/net/ieee802154/adf7242.o text data bss dec hex filename 7211 2296 32 9539 2543 drivers/net/ieee802154/atusb.o 7339 2160 32 9531 253b drivers/net/ieee802154/atusb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21Merge branch 'geneve-lwt-efficiency'David S. Miller1-405/+274
Pravin B Shelar says: ==================== geneve: Use LWT more effectively. Following patch series make use of geneve LWT code path for geneve netdev type of device. This allows us to simplify geneve module without changing any functionality. v2-v3: Rebase against latest net-next. v1-v2: Fix warning reported by kbuild test robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21geneve: Optimize geneve device lookup.pravin shelar1-4/+13
Rather than comparing 64-bit tunnel-id, compare tunnel vni which is 24-bit id. This also save conversion from vni to tunnel id on each tunnel packet receive. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21geneve: Remove redundant socket checks.pravin shelar1-8/+2
Geneve already has check for device socket in route lookup function. So no need to check it in xmit function. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21geneve: Merge ipv4 and ipv6 geneve_build_skb()pravin shelar1-74/+26
There are minimal difference in building Geneve header between ipv4 and ipv6 geneve tunnels. Following patch refactors code to unify it. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21geneve: Unify LWT and netdev handling.pravin shelar1-349/+263
Current geneve implementation has two separate cases to handle. 1. netdev xmit 2. LWT xmit. In case of netdev, geneve configuration is stored in various struct geneve_dev members. For example geneve_addr, ttl, tos, label, flags, dst_cache, etc. For LWT ip_tunnel_info is passed to the device in ip_tunnel_info. Following patch uses ip_tunnel_info struct to store almost all of configuration of a geneve netdevice. This allows us to unify most of geneve driver code around ip_tunnel_info struct. This dramatically simplify geneve code, since it does not need to handle two different configuration cases. Removes duplicate code, single code path can handle either type of geneve devices. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21Merge branch 'tcp-cong-undo_cwnd-mandatory'David S. Miller13-7/+74
Florian Westphal says: ==================== tcp: make undo_cwnd mandatory for congestion modules highspeed, illinois, scalable, veno and yeah congestion control algorithms don't provide a 'cwnd_undo' function. This makes the stack default to a 'reno undo' which doubles cwnd. However, the ssthresh implementation of these algorithms do not halve the slowstart threshold. This causes similar issue as the one fixed for dctcp in ce6dd23329b1e ("dctcp: avoid bogus doubling of cwnd after loss"). In light of this it seems better to remove the fallback and make undo_cwnd mandatory. First patch fixes those spots where reno undo seems incorrect by providing .cwnd_undo functions, second patch removes the fallback. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21tcp: make undo_cwnd mandatory for congestion modulesFlorian Westphal8-6/+19
The undo_cwnd fallback in the stack doubles cwnd based on ssthresh, which un-does reno halving behaviour. It seems more appropriate to let congctl algorithms pair .ssthresh and .undo_cwnd properly. Add a 'tcp_reno_undo_cwnd' function and wire it up for all congestion algorithms that used to rely on the fallback. Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21tcp: add cwnd_undo functions to various tcp cc algorithmsFlorian Westphal5-1/+55
congestion control algorithms that do not halve cwnd in their .ssthresh should provide a .cwnd_undo rather than rely on current fallback which assumes reno halving (and thus doubles the cwnd). All of these do 'something else' in their .ssthresh implementation, thus store the cwnd on loss and provide .undo_cwnd to restore it again. A followup patch will remove the fallback and all algorithms will need to provide a .cwnd_undo function. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21Merge branch 'bridge-igmpv3-mldv2-support'David S. Miller5-39/+210
Nikolay Aleksandrov says: ==================== bridge: add support for IGMPv3 and MLDv2 querier This patch-set adds support for IGMPv3 and MLDv2 querier in the bridge. Two new options which can be toggled via netlink and sysfs are added that control the version per-bridge: multicast_igmp_version - default 2, can be set to 3 multicast_mld_version - default 1, can be set to 2 (this option is disabled if CONFIG_IPV6=n) Note that the names do not include "querier", I think that these options can be re-used later as more IGMPv3 support is added to the bridge so we can avoid adding more options to switch between v2 and v3 behaviour. The set uses the already existing br_ip{4,6}_multicast_alloc_query functions and adds the appropriate header based on the chosen version. For the initial support I have removed the compatibility implementation (RFC3376 sec 7.3.1, 7.3.2; RFC3810 sec 8.3.1, 8.3.2), because there are some details that we need to sort out. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bridge: mcast: add MLDv2 querier supportNikolay Aleksandrov5-22/+113
This patch adds basic support for MLDv2 queries, the default is MLDv1 as before. A new multicast option - multicast_mld_version, adds the ability to change it between 1 and 2 via netlink and sysfs. The MLD option is disabled if CONFIG_IPV6 is disabled. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bridge: mcast: add IGMPv3 query supportNikolay Aleksandrov5-18/+98
This patch adds basic support for IGMPv3 queries, the default is IGMPv2 as before. A new multicast option - multicast_igmp_version, adds the ability to change it between 2 and 3 via netlink and sysfs. The option struct member is in a 4 byte hole in net_bridge. There also a few minor style adjustments in br_multicast_new_group and br_multicast_add_group. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21tcp: zero ca_priv area when switching cc algorithmsFlorian Westphal1-1/+3
We need to zero out the private data area when application switches connection to different algorithm (TCP_CONGESTION setsockopt). When congestion ops get assigned at connect time everything is already zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case this contains whatever previous cc placed there. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmitGao Feng1-1/+1
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packe is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So l2tp_eth_dev_xmit should add the NET_XMIT_CN check. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21driver: macvlan: Remove duplicated IFF_UP condition check in ↵Gao Feng1-2/+1
macvlan_forward_source The function macvlan_forward_source_one has already checked the flag IFF_UP, so needn't check it outside in macvlan_forward_source too. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoCPeter Robinson1-1/+1
There's not much point, except compile test, enabling the stmmac platform drivers unless the STM32 SoC is enabled. It's not useful without it. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21mlx4: avoid unnecessary dirtying of critical fieldsEric Dumazet1-17/+30
While stressing a 40Gbit mlx4 NIC with busy polling, I found false sharing in mlx4 driver that can be easily avoided. This patch brings an additional 7 % performance improvement in UDP_RR workload. 1) If we received no frame during one mlx4_en_process_rx_cq() invocation, no need to call mlx4_cq_set_ci() and/or dirty ring->cons 2) Do not refill rx buffers if we have plenty of them. This avoids false sharing and allows some bulk/batch optimizations. Page allocator and its locks will thank us. Finally, mlx4_en_poll_rx_cq() should not return 0 if it determined cpu handling NIC IRQ should be changed. We should return budget-1 instead, to not fool net_rx_action() and its netdev_budget. v2: keep AVG_PERF_COUNTER(... polled) even if polled is 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bnx2: use READ_ONCE() instead of barrier()Eric Dumazet1-12/+5
barrier() is a big hammer compared to READ_ONCE(), and requires comments explaining what is protected. READ_ONCE() is more precise and compiler should generate better overall code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21udp: avoid one cache line miss in recvmsg()Eric Dumazet2-2/+4
UDP_SKB_CB(skb)->partial_cov is located at offset 66 in skb, requesting a cold cache line being read in cpu cache. We can avoid this cache line miss for UDP sockets, as partial_cov has a meaning only for UDPLite. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21Merge branch 'mlx5-bpf-refcnt-fixes'David S. Miller3-13/+33
Daniel Borkmann says: ==================== Couple of BPF refcount fixes for mlx5 Various mlx5 bugs on eBPF refcount handling found during review. Last patch in series adds a __must_check to BPF helpers to make sure we won't run into it again w/o compiler complaining first. v2 -> v3: - Just reworked patch 2/4 so we don't need bpf_prog_sub(). - Rebased, rest as is. v1 -> v2: - After discussion with Alexei, we agreed upon rebasing the patches against net-next. - Since net-next, I've also added the __must_check to enforce future users to check for errors. - Fixed up commit message #2. - Simplify assignment from patch #1 based on Saeed's feedback on previous set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bpf: add __must_check attributes to refcount manipulating helpersDaniel Borkmann1-5/+7
Helpers like bpf_prog_add(), bpf_prog_inc(), bpf_map_inc() can fail with an error, so make sure the caller properly checks their return value and not just ignores it, which could worst-case lead to use after free. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bpf, mlx5: drop priv->xdp_prog reference on netdev cleanupDaniel Borkmann1-0/+3
mlx5e_xdp_set() is currently the only place where we drop reference on the prog sitting in priv->xdp_prog when it's exchanged by a new one. We also need to make sure that we eventually release that reference, for example, in case the netdev is dismantled, otherwise we leak the program. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bpf, mlx5: fix various refcount issues in mlx5e_xdp_setDaniel Borkmann1-4/+13
There are multiple issues in mlx5e_xdp_set(): 1) The batched bpf_prog_add() is currently not checked for errors. When doing so, it should be done at an earlier point in time to makes sure that we cannot fail anymore at the time we want to set the program for each channel. The batched refs short-cut can only be performed when we don't need to perform a reset for changing the rq type and the device was in opened state. In case the device was not in opened state, then the next mlx5e_open_locked() will aquire the refs from the control prog via mlx5e_create_rq(), same when we need to perform a reset. 2) When swapping the priv->xdp_prog, then no extra reference count must be taken since we got that from call path via dev_change_xdp_fd() already. Otherwise, we'd never be able to release the program. Also, bpf_prog_add() without checking the return code could fail. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21bpf, mlx5: fix mlx5e_create_rq taking reference on progDaniel Borkmann2-4/+10
In mlx5e_create_rq(), when creating a new queue, we call bpf_prog_add() but without checking the return value. bpf_prog_add() can fail since 92117d8443bc ("bpf: fix refcnt overflow"), so we really must check it. Take the reference right when we assign it to the rq from priv->xdp_prog, and just drop the reference on error path. Destruction in mlx5e_destroy_rq() looks good, though. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21apparmor: fix change_hat not finding hat after policy replacementJohn Johansen1-2/+4
After a policy replacement, the task cred may be out of date and need to be updated. However change_hat is using the stale profiles from the out of date cred resulting in either: a stale profile being applied or, incorrect failure when searching for a hat profile as it has been migrated to the new parent profile. Fixes: 01e2b670aa898a39259bc85c78e3d74820f4d3b6 (failure to find hat) Fixes: 898127c34ec03291c86f4ff3856d79e9e18952bc (stale policy being applied) Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287 Cc: stable@vger.kernel.org Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-11-20Merge branch 'mV88e6xxx-interrupt-fixes'David S. Miller3-28/+59
Andrew Lunn says: ==================== Fixes for the MV88e6xxx interrupt code The interrupt code was never tested with a board who's probing resulted in an -EPROBE_DEFFERED. So the clean up paths never got tested. I now do have -EPROBE_DEFFERED, and things break badly during cleanup. These are the fixes. This is fixing code in net-next. v2: Fix typo pointed out by David Miller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-20net: dsa: mv88e6xxx: Hold the mutex while freeing g1 interruptsAndrew Lunn1-1/+4
Freeing interrupts requires switch register access to mask the interrupts. Hence we must hold the register mutex. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-20net: dsa: mv88e6xxx: Fix releasing for the global2 interruptsAndrew Lunn2-10/+19
It is not possible to use devm_request_threaded_irq() because we have two stacked interrupt controllers in one device. The lower interrupt controller cannot be removed until the upper is fully removed. This happens too late with the devm API, resulting in error messages about removing a domain while there is still an active interrupt. Swap to using request_threaded_irq() and manage the release of the interrupt manually. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-20net: dsa: mv88e6xxx: Fix cleanup on error for g1 interrupt setupAndrew Lunn1-11/+20
On error, remask the interrupts, release all maps, and remove the domain. This cannot be done using the mv88e6xxx_g1_irq_free() because some of these actions are not idempotent. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-20net: dsa: mv88e6xxx: Mask g1 interrupts and free interruptAndrew Lunn1-0/+7
Fix the g1 interrupt free code such that is masks any further interrupts, and then releases the interrupt. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 12:45:24 +0000